Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2025-02-18 06:58:54 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/xilinx_zynqmp_zcu102_revB_defconfig

111 lines
2.5 KiB
Text
Raw Normal View History

ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_ARM=y
CONFIG_ARCH_ZYNQMP=y
xilinx: Align defconfig with current Kconfig order Keep all defconfig sorted to ensure the smallest diff. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10 13:57:35 +01:00
CONFIG_SYS_TEXT_BASE=0x8000000
ARM64: zynqmp: Extend malloc space before relocation For boards which have more devices it is necessary to extend malloc space. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-03 11:35:17 +02:00
CONFIG_SYS_MALLOC_F_LEN=0x8000
xilinx: Sync defconfigs with latest Kconfig updates Make defconfigs up2date with current location. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:00 +01:00
CONFIG_SPL=y
xilinx: Sync symbols location in defconfigs CONFIG_DEBUG_UART_BASE and CONFIG_DEBUG_UART_CLOCK have changed that's why this sync. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-04 08:33:30 +02:00
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
arm64: zynqmp: Enable SPI on several boards Enable GQSPI driver, SF command and SPL support for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-15 09:30:38 +01:00
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 09:47:40 -04:00
CONFIG_ZYNQMP_USB=y
CONFIG_DEBUG_UART=y
ARM64: zynqmp: Enable CONFIG_AHCI via Kconfig Move CONFIG_AHCI to defconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-07 13:16:31 +02:00
CONFIG_AHCI=y
Enable DISTRO_DEFAULT on platforms that missed it before A number of platforms had been using the distro default feature before it was moved to Kconfig but did not enable the new Kconfig option when it was enabled. This caused a regression in terms of features and this introduces breakage when more things move to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-29 09:14:57 -05:00
CONFIG_DISTRO_DEFAULTS=y
ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
ARM64: zynqmp: Enable support for SPL FIT images Enable support for RAM based FIT images read by SPL. Empty function for now to keep compiler happy. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-17 08:38:53 +02:00
CONFIG_SPL_LOAD_FIT=y
common/Kconfig: Add DISPLAY_CPUINFO Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-08 14:41:44 -04:00
# CONFIG_DISPLAY_CPUINFO is not set
treewide: Migrate CONFIG_BOARD_EARLY_INIT_R to Kconfig Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-28 14:38:15 +02:00
CONFIG_BOARD_EARLY_INIT_R=y
spl: move SPL_OS_BOOT to Kconfig Move SPL_OS_BOOT to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-06 07:55:15 +02:00
CONFIG_SPL_OS_BOOT=y
arm64: zynqmp: Enable SPL ram support Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-08 15:01:19 +01:00
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
arm64: zynqmp: Enable booting to ATF U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which pass control to full u-boot(EL2). This has been tested on zcu106, so enable it in this defconfig. To generate an image that triggers this booting flow, you need to pass '-O arm-trusted-firmware' to mkimage. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-12 17:18:38 +01:00
CONFIG_SPL_ATF=y
Convert CONFIG_CMD_THOR_DOWNLOAD to Kconfig This converts the following to Kconfig: CONFIG_CMD_THOR_DOWNLOAD Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 16:34:57 -06:00
CONFIG_CMD_THOR_DOWNLOAD=y
ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_CMD_MEMTEST=y
treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration after also including CMD_MEMTEST] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 14:38:14 +02:00
CONFIG_SYS_ALT_MEMTEST=y
arm64: zynqmp: Enable clock command for all boards clk command provides an option to see actual clock setting. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-01 15:35:43 +01:00
CONFIG_CMD_CLK=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 19:58:53 -04:00
CONFIG_CMD_DFU=y
arm64: zynqmp: Enable fpga bitstream loading Enable fpga loadb and loadbp for zynqmp platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-08 15:03:26 +01:00
CONFIG_CMD_FPGA_LOADBP=y
CONFIG_CMD_FPGA_LOADP=y
arm64: zynqmp: Enable FPGA_LOAD_SECURE command Enable fpga load secure feature for xilinx platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-15 11:01:54 +01:00
CONFIG_CMD_FPGA_LOAD_SECURE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 19:58:53 -04:00
CONFIG_CMD_GPIO=y
cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-27 11:00:42 +01:00
CONFIG_CMD_GPT=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 16:41:25 -04:00
CONFIG_CMD_I2C=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 19:58:53 -04:00
CONFIG_CMD_MMC=y
arm64: zynqmp: Enable SPD ddr support for zcu102 targets zcu102 contains DIMM with SPD on it at 0x51 address. For example: i2c dev 13 i2c sdram 51 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-04 08:27:50 +02:00
CONFIG_CMD_SDRAM=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 16:41:25 -04:00
CONFIG_CMD_USB=y
ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 17:29:26 -04:00
CONFIG_CMD_EXT4_WRITE=y
ARM64: zynqmp: Enable SPL for all zynqmp boards Compile SPL for all boards even psu_init.c/h files are not in the tree yet. But this change enables covering SPL issues in mainline. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-15 08:41:46 +02:00
CONFIG_SPL_OF_CONTROL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 15:26:12 -04:00
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revB"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 07:16:32 -04:00
CONFIG_ENV_IS_IN_FAT=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12 22:46:36 -05:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_NET_RANDOM_ETHADDR=y
xilinx: Sync defconfigs with the latest Kconfig layout Update Microblaze, Zynq and ZynqMP defconfigs to reflect latest Kconfig changes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-27 15:08:03 +02:00
CONFIG_SPL_DM=y
ARM64: zynqmp: Enable SPL for all zynqmp boards Compile SPL for all boards even psu_init.c/h files are not in the tree yet. But this change enables covering SPL issues in mainline. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-15 08:41:46 +02:00
CONFIG_SPL_DM_SEQ_ALIAS=y
ata: Migrate CONFIG_SCSI_AHCI to Kconfig And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-08 15:36:19 +02:00
CONFIG_SCSI_AHCI=y
block: Move ceva driver to DM This patch also includes ARM64 zynqmp changes: - Remove platform non DM initialization - Remove hardcoded sata base address Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-08 15:06:22 +02:00
CONFIG_SATA_CEVA=y
arm64: zynqmp: Convert board to use zynqmp-clk driver Use zynqmp clock driver instead of fixed clocks. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-08 14:50:42 +01:00
CONFIG_CLK_ZYNQMP=y
dfu: Migrate to Kconfig Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for CMD_DFU (as we must have the DFU command enabled to do anything DFU). Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add options for all of the back end choices that DFU can make use of. Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-19 13:31:30 -04:00
CONFIG_DFU_RAM=y
usb: fastboot: Convert USB f_fastboot to shared fastboot Convert USB fastboot code to use shared fastboot protocol. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-29 15:30:55 +00:00
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMP Add PL bitstream dowload support for ZynqMP Bitstream will be validated by uboot and loaded to PL by invoking an smc instruction to ATF which route this request to PMU FW which will take care of loading it to PL Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-13 16:25:37 +05:30
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-08 16:11:59 -04:00
CONFIG_DM_GPIO=y
arm64: zynqmp: Enable gpio hog support for zcu102 Gpio hogs are used for GT mux setup after power up. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-05-29 15:04:51 +02:00
CONFIG_GPIO_HOG=y
arm64: zynqmp: Enable soft gpio driver for zcu102 and zcu100 Enable soft gpio driver for zcu102 and zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-24 12:45:29 +02:00
CONFIG_XILINX_GPIO=y
arm64: zynqmp: Switch all platforms to DM_I2C CONFIG_PCA953X is not needed because of PCA953X is integrated in gpio subsystem already. That's why also remove CMD_PCA953X which is only for this driver. zcu102/zcu104-revC/zcu106/zcu111 contain links to eeprom which stores MAC address. DM_I2C is not enabled for the whole SoC because it increase size for mini configurations and there is no I2C symbol present to setup dependencies. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-01-18 09:10:39 +01:00
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
xilinx: Enable led support for some boards Enable led support for boards which have "gpio-leds" node. And also for microblaze which is converted to DM_GPIO now. Tested on zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-16 14:12:43 +02:00
CONFIG_LED=y
CONFIG_LED_GPIO=y
arm64: zynqmp: Enable misc devices Enable misc devices for zynqmp targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-08 14:46:30 +01:00
CONFIG_MISC=y
arm64: zynqmp: Switch all platforms to DM_I2C CONFIG_PCA953X is not needed because of PCA953X is integrated in gpio subsystem already. That's why also remove CMD_PCA953X which is only for this driver. zcu102/zcu104-revC/zcu106/zcu111 contain links to eeprom which stores MAC address. DM_I2C is not enabled for the whole SoC because it increase size for mini configurations and there is no I2C symbol present to setup dependencies. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-01-18 09:10:39 +01:00
CONFIG_I2C_EEPROM=y
i2c: Added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET This patch added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-02-16 19:07:21 +05:30
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
arm64: zynqmp: Switch all platforms to DM_I2C CONFIG_PCA953X is not needed because of PCA953X is integrated in gpio subsystem already. That's why also remove CMD_PCA953X which is only for this driver. zcu102/zcu104-revC/zcu106/zcu111 contain links to eeprom which stores MAC address. DM_I2C is not enabled for the whole SoC because it increase size for mini configurations and there is no I2C symbol present to setup dependencies. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-01-18 09:10:39 +01:00
CONFIG_SYS_I2C_EEPROM_ADDR=0x0
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI. My motivation for the rename is, ultimately, to make all the MMC options prefixed with MMC_ and SDHCI options with MMC_SDHCI_, like Linux. This commit was created as follows: [1] Rename the config option with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g' [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig [3] run "tools/moveconfig.py -y MMC_SDHCI" [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-07 22:10:28 +09:00
CONFIG_MMC_SDHCI=y
xilinx: Align defconfig with current Kconfig order Keep all defconfig sorted to ensure the smallest diff. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10 13:57:35 +01:00
CONFIG_MMC_SDHCI_ZYNQ=y
arm64: zynqmp: Enables SPI_FLASH_BAR Enable the SPI flash Bank/Extended address register support for all ZynqMP boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-15 12:07:30 +02:00
CONFIG_SPI_FLASH_BAR=y
arm64: zynqmp: Enable ISSI flash for some platforms Enable ISSI flash for platforms. Xilinx reference boards are also used internally with different flash part to increase coverage that's why enable also ISSI parts for all these boards even if that board is released only with one part. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-15 10:45:41 +01:00
CONFIG_SPI_FLASH_ISSI=y
arm64: zynqmp: Enable spi flashes Enabling all spi flashes because some of these boards can have different flashes compared to public version. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-08 15:18:05 +01:00
CONFIG_SPI_FLASH_MACRONIX=y
ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
arm64: zynqmp: Dont use 4K sector erase by default for spi-flashes Dont use 4K sector erase by default, Disabling this would use 64K sector erase and decreases erase time. Also disabled by the fact that UBIFS and JFFS2 won't work with 4K sector erase. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-31 10:44:06 +05:30
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
arm64: zynqmp: Moved ethernet PHY configs of ZynqMP boards to defconfig This patch moved ethernet PHY configs of ZynqMP boards to respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-24 10:51:31 +05:30
CONFIG_PHY_MARVELL=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI=y
CONFIG_PHY_VITESSE=y
arm64: zynqmp: Enable Fixed link support This patch enables the fixed link support for all ZynqMP boards. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-28 14:18:19 +02:00
CONFIG_PHY_FIXED=y
configs: Finish migration of PHY_GIGE Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-07 22:00:34 -04:00
CONFIG_PHY_GIGE=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-20 23:03:57 -05:00
CONFIG_MII=y
ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_ZYNQ_GEM=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-11 11:20:19 -04:00
CONFIG_SCSI=y
CONFIG_DM_SCSI=y
ARM64: zynqmp: Wire up debug_uart setup It has to be enabled by debug_uart_init(). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-22 08:50:45 +02:00
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_ANNOUNCE=y
arm: zynq: Move ZYNQ_SERIAL to Kconfig Move cadence/zynq serial driver via Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-06 09:16:05 +01:00
CONFIG_ZYNQ_SERIAL=y
zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards This patch adds qspi driver support for all ZynqMP ZCU102 boards. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-04 17:31:24 +05:30
CONFIG_SPI=y
CONFIG_ZYNQMP_GQSPI=y
ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_USB=y
usb: move CONFIG_USB_XHCI to Kconfig with renaming Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-04 07:35:03 +09:00
CONFIG_USB_XHCI_HCD=y
usb: move CONFIG_USB_XHCI_DWC3 to Kconfig Create an entry for "config USB_XHCI_DWC3" in Kconfig and switch over to it for all boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-04 07:35:04 +09:00
CONFIG_USB_XHCI_DWC3=y
configs: Update some Xilinx configs As part of 3457bba these configs didn't get updated. Update them now. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-20 15:33:05 -04:00
CONFIG_USB_DWC3=y
arm64: zynqmp: Use DWC3 generic driver and DM_USB Remove harcoded XHCI lists and detect mode, speed based on DT. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Serial-changes: 2 - Remove also XHCI macros from hardware.h - Remove additional new line in zcu106
2018-05-18 13:15:08 +02:00
CONFIG_USB_DWC3_GENERIC=y
ARM64: zynqmp: Add defconfig for zcu102 revB board Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-11 08:07:07 +02:00
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
usb: gadget: Make g_dnl USB settings common The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 08:58:08 +02:00
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig This commit moves USB_FUNCTION_THOR config to Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-29 19:30:18 +01:00
CONFIG_USB_FUNCTION_THOR=y
efi_loader: Select bounce buffers for known-bad boards We know for certain that we have 32bit DMA hardware, but 64bit addresses on LS2085A and ZynqMP, so let's enable EFI bounce buffers for all defconfigs on these SoCs. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-11 18:25:49 +02:00
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
Reference in a new issue Copy permalink