Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 18:28:55 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/serial.h

76 lines
2 KiB
C
Raw Normal View History

* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
#ifndef __SERIAL_H__
#define __SERIAL_H__
serial: implement common uart post test The current arch/driver specific UART posts basically boil down to setting the UART to loop back mode, then reading and writing data. If we ignore the loop back part, the rest can be built upon the existing common serial API. So let's do just that. First add a call back for serial drivers to implement loop back control. Then write a post test that walks all of the serial drivers, puts them into loop back mode, and verifies that reading/writing at all the diff baud rates is OK. If a serial driver doesn't support loop back mode (either it can't or it hasn't done so yet), then skip it. This should allow for people to easily migrate to the new post test with existing serial drivers. I haven't touched the few already existing uart post tests as I don't the hardware or knowledge of converting them over. So I've marked the new test as weak which will allow the existing tests to override the default until they are converted. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-14 06:56:15 +00:00
#include <post.h>
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
struct serial_device {
net/miiphy/serial: drop duplicate "NAMESIZE" define A few subsystems are using the same define "NAMESIZE". This has been working so far because they define it to the same number. However, I want to change the size of eth_device's NAMESIZE, so rather than tweak the define names, simply drop references to it. Almost no one does, and the handful that do can easily be changed to a sizeof(). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-10 14:11:04 +00:00
/* enough bytes to match alignment of following func pointer */
serial: Coding style cleanup of struct serial_device Do a simple cleanup of the struct serial_device and align it with current coding style. Checkpatch now reports no errors. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
2012-09-07 12:32:10 +00:00
char name[16];
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
serial: Rename .init() and .uninit() in serial_device Rename .init() to .start() and .uninit() to .stop() in struct serial_device. This allows aligning struct serial_device with closer to struct stdio_dev. The real goal here is to allow these two structures to converge together and eventually make one to be a superset of the other. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
2012-09-07 12:35:31 +00:00
int (*start)(void);
int (*stop)(void);
serial: Coding style cleanup of struct serial_device Do a simple cleanup of the struct serial_device and align it with current coding style. Checkpatch now reports no errors. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
2012-09-07 12:32:10 +00:00
void (*setbrg)(void);
int (*getc)(void);
int (*tstc)(void);
void (*putc)(const char c);
void (*puts)(const char *s);
serial: implement common uart post test The current arch/driver specific UART posts basically boil down to setting the UART to loop back mode, then reading and writing data. If we ignore the loop back part, the rest can be built upon the existing common serial API. So let's do just that. First add a call back for serial drivers to implement loop back control. Then write a post test that walks all of the serial drivers, puts them into loop back mode, and verifies that reading/writing at all the diff baud rates is OK. If a serial driver doesn't support loop back mode (either it can't or it hasn't done so yet), then skip it. This should allow for people to easily migrate to the new post test with existing serial drivers. I haven't touched the few already existing uart post tests as I don't the hardware or knowledge of converting them over. So I've marked the new test as weak which will allow the existing tests to override the default until they are converted. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-14 06:56:15 +00:00
#if CONFIG_POST & CONFIG_SYS_POST_UART
serial: Coding style cleanup of struct serial_device Do a simple cleanup of the struct serial_device and align it with current coding style. Checkpatch now reports no errors. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
2012-09-07 12:32:10 +00:00
void (*loop)(int);
serial: implement common uart post test The current arch/driver specific UART posts basically boil down to setting the UART to loop back mode, then reading and writing data. If we ignore the loop back part, the rest can be built upon the existing common serial API. So let's do just that. First add a call back for serial drivers to implement loop back control. Then write a post test that walks all of the serial drivers, puts them into loop back mode, and verifies that reading/writing at all the diff baud rates is OK. If a serial driver doesn't support loop back mode (either it can't or it hasn't done so yet), then skip it. This should allow for people to easily migrate to the new post test with existing serial drivers. I haven't touched the few already existing uart post tests as I don't the hardware or knowledge of converting them over. So I've marked the new test as weak which will allow the existing tests to override the default until they are converted. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-14 06:56:15 +00:00
#endif
serial: Coding style cleanup of struct serial_device Do a simple cleanup of the struct serial_device and align it with current coding style. Checkpatch now reports no errors. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
2012-09-07 12:32:10 +00:00
struct serial_device *next;
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
};
serial: Implement default_serial_puts() U-Boot contains a lot of duplicit implementations of serial_puts() call which just pipes single characters into the port in loop. Implement function that does this behavior into common code, so others can make easy use of it. This function is called default_serial_puts() and it's sole purpose is to call putc() in loop on the whole string passed to it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
2012-10-06 14:07:01 +00:00
void default_serial_puts(const char *s);
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
extern struct serial_device serial_smc_device;
extern struct serial_device serial_scc_device;
serial: cosmetic checkpatch compliance Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-18 06:49:11 +00:00
extern struct serial_device *default_serial_console(void);
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_440) || \
defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \
defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \
Tegra30: Add generic Tegra30 build support This patch adds basic Tegra30 (T30) build support - no specific board is targeted. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2012-12-11 13:34:17 +00:00
defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \
serial: Support serial multi for Microblaze enable serial multi for Microblaze. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net>
2012-07-02 10:38:14 +00:00
defined(CONFIG_MICROBLAZE)
* Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
2005-01-09 22:28:56 +00:00
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
serial: ns16550: Move serial registration from serial_initialize() Move the registration of eserialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented ns16550_serial_initialize() function, which is implemented inside of the ns16550 serial driver allows encapsulation of eserialN_device within the ns16550 serial driver itself. Also, remove the exports of eserialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the ns16550 serial driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu>
2012-09-12 18:02:05 +00:00
#endif
Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled
2006-08-30 21:02:10 +00:00
extern struct serial_device eserial1_device;
extern struct serial_device eserial2_device;
* Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
2005-01-09 22:28:56 +00:00
Blackfin: uart: add multiple serial support This brings CONFIG_SERIAL_MULTI support to the Blackfin on-chip UARTs. Ends up adding only ~512bytes per additional UART. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-30 03:23:28 +00:00
extern void serial_register(struct serial_device *);
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
extern void serial_initialize(void);
stdio/device: rework function naming convention So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-05-16 10:14:54 +00:00
extern void serial_stdio_init(void);
serial: constify serial_assign() Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-18 06:49:12 +00:00
extern int serial_assign(const char *name);
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
extern void serial_reinit_all(void);
USBTTY make some function declarations easier to use. Zoom2 needs to use these declarations and the include directory is a better place from them than in the middle of the driver directory. It did not make sense to create a new file for just a couple of lines so they were appended to the serial.h Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:44 +00:00
/* For usbtty */
OMAP3 zoom2 Use usbtty if the debug board is not connected. The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:45 +00:00
#ifdef CONFIG_USB_TTY
USBTTY make some function declarations easier to use. Zoom2 needs to use these declarations and the include directory is a better place from them than in the middle of the driver directory. It did not make sense to create a new file for just a couple of lines so they were appended to the serial.h Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:44 +00:00
extern int usbtty_getc(void);
extern void usbtty_putc(const char c);
extern void usbtty_puts(const char *str);
extern int usbtty_tstc(void);
OMAP3 zoom2 Use usbtty if the debug board is not connected. The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:45 +00:00
#else
/* stubs */
#define usbtty_getc() 0
#define usbtty_putc(a)
#define usbtty_puts(a)
#define usbtty_tstc() 0
#endif /* CONFIG_USB_TTY */
serial: Remove CONFIG_SERIAL_MULTI from remaining sources Remove the parts depending either on disabled CONFIG_SERIAL_MULTI or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI is now enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
2012-09-14 21:45:51 +00:00
#if defined(CONFIG_MPC512X)
mpc5121: add PSC serial communication routines Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 17:27:06 +00:00
extern struct stdio_dev *open_port(int num, int baudrate);
extern int close_port(int num);
extern int write_port(struct stdio_dev *port, char *buf);
extern int read_port(struct stdio_dev *port, char *buf, int size);
#endif
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
#endif
Reference in a new issue Copy permalink