Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 18:59:44 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/serial.h

124 lines
3.6 KiB
C
Raw Normal View History

* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
#ifndef __SERIAL_H__
#define __SERIAL_H__
serial: implement common uart post test The current arch/driver specific UART posts basically boil down to setting the UART to loop back mode, then reading and writing data. If we ignore the loop back part, the rest can be built upon the existing common serial API. So let's do just that. First add a call back for serial drivers to implement loop back control. Then write a post test that walks all of the serial drivers, puts them into loop back mode, and verifies that reading/writing at all the diff baud rates is OK. If a serial driver doesn't support loop back mode (either it can't or it hasn't done so yet), then skip it. This should allow for people to easily migrate to the new post test with existing serial drivers. I haven't touched the few already existing uart post tests as I don't the hardware or knowledge of converting them over. So I've marked the new test as weak which will allow the existing tests to override the default until they are converted. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-14 06:56:15 +00:00
#include <post.h>
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
struct serial_device {
net/miiphy/serial: drop duplicate "NAMESIZE" define A few subsystems are using the same define "NAMESIZE". This has been working so far because they define it to the same number. However, I want to change the size of eth_device's NAMESIZE, so rather than tweak the define names, simply drop references to it. Almost no one does, and the handful that do can easily be changed to a sizeof(). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-10 14:11:04 +00:00
/* enough bytes to match alignment of following func pointer */
char name[16];
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
int (*init) (void);
serial: struct serial_device: add uninit() entry for drivers Subsequent patch extends mpc512x serial driver to support multiple PSC ports. The driver will provide an uninit() function to stop the serial controller and to disable the controller's clock. Adding uninit() entry to struct serial_device allows disabling the serial controller after usage of a stdio serial device. This patch adds uninit() entry to the struct serial_device and fixes initialization of this structure in the code accordingly. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 17:27:04 +00:00
int (*uninit) (void);
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
void (*setbrg) (void);
int (*getc) (void);
int (*tstc) (void);
void (*putc) (const char c);
void (*puts) (const char *s);
serial: implement common uart post test The current arch/driver specific UART posts basically boil down to setting the UART to loop back mode, then reading and writing data. If we ignore the loop back part, the rest can be built upon the existing common serial API. So let's do just that. First add a call back for serial drivers to implement loop back control. Then write a post test that walks all of the serial drivers, puts them into loop back mode, and verifies that reading/writing at all the diff baud rates is OK. If a serial driver doesn't support loop back mode (either it can't or it hasn't done so yet), then skip it. This should allow for people to easily migrate to the new post test with existing serial drivers. I haven't touched the few already existing uart post tests as I don't the hardware or knowledge of converting them over. So I've marked the new test as weak which will allow the existing tests to override the default until they are converted. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-14 06:56:15 +00:00
#if CONFIG_POST & CONFIG_SYS_POST_UART
void (*loop) (int);
#endif
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
struct serial_device *next;
};
extern struct serial_device serial_smc_device;
extern struct serial_device serial_scc_device;
serial: cosmetic checkpatch compliance Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-18 06:49:11 +00:00
extern struct serial_device *default_serial_console(void);
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_440) || \
defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \
defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \
x86: Initial commit for running as a coreboot payload Add a target for running u-boot as a coreboot payload in boards.cfg, a board, CPU and a config. This is a skeleton implementation which always reports the size of memory as 64 MB. Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-29 18:05:07 +00:00
defined(CONFIG_TEGRA2) || defined(CONFIG_SYS_COREBOOT)
* Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
2005-01-09 22:28:56 +00:00
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-16 13:01:15 +00:00
#if defined(CONFIG_SYS_NS16550_SERIAL)
Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled
2006-08-30 21:02:10 +00:00
extern struct serial_device eserial1_device;
extern struct serial_device eserial2_device;
extern struct serial_device eserial3_device;
extern struct serial_device eserial4_device;
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-16 13:01:15 +00:00
#endif /* CONFIG_SYS_NS16550_SERIAL */
Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled
2006-08-30 21:02:10 +00:00
* Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
2005-01-09 22:28:56 +00:00
#endif
mpc512x: add multi serial PSC support Extend mpc512x serial driver to support multiple PSC ports. Subsequent patches for PDM360NG board support make use of this functionality by defining CONFIG_SERIAL_MULTI in the board config file. Additionally the used PSC devices are specified by defining e.g. CONFIG_SYS_PSC1, CONFIG_SYS_PSC4 and CONFIG_SYS_PSC6. Support for PSC devices other than 1, 3, 4 and 6 is not added by this patch because these aren't used currently. In the future it can be easily added using DECLARE_PSC_SERIAL_FUNCTIONS(N) and INIT_PSC_SERIAL_STRUCTURE(N) macros in cpu/mpc512x/serial.c. Additionally you have to add code for registering added devices in serial_initialize() in common/serial.c. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 17:27:05 +00:00
#if defined(CONFIG_MPC512X)
extern struct serial_device serial1_device;
extern struct serial_device serial3_device;
extern struct serial_device serial4_device;
extern struct serial_device serial6_device;
#endif
serial: uartlite: Support for SERIAL_MULTI Add support for SERIAL MULTI for uartlite. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-09-25 21:03:08 +00:00
#if defined(CONFIG_XILINX_UARTLITE)
extern struct serial_device uartlite_serial0_device;
extern struct serial_device uartlite_serial1_device;
extern struct serial_device uartlite_serial2_device;
extern struct serial_device uartlite_serial3_device;
#endif
ARM: s3c24xx: Multiple serial port support This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's Signed-off-by: Harald Welte <laforge@openmoko.org>
2007-12-19 13:24:40 +00:00
#if defined(CONFIG_S3C2410)
extern struct serial_device s3c24xx_serial0_device;
extern struct serial_device s3c24xx_serial1_device;
extern struct serial_device s3c24xx_serial2_device;
#endif
* Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
2005-01-09 22:28:56 +00:00
ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5P Use the same configuration around S5P SoCs. (s5pc100, s5pc110, s5pc210 and so on) Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-08-23 10:52:03 +00:00
#if defined(CONFIG_S5P)
SAMSUNG: serial: modify name from s5pc1xx to s5p Because of other s5p series SoC will use these serial functions, modify function's name and structure's name. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-03-24 07:59:30 +00:00
extern struct serial_device s5p_serial0_device;
extern struct serial_device s5p_serial1_device;
extern struct serial_device s5p_serial2_device;
extern struct serial_device s5p_serial3_device;
s5pc1xx: support serial driver This patch includes the serial driver for s5pc1xx. s5pc1xx uart driver needs own register setting and clock configuration. So, need to special driver. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-10-01 08:20:28 +00:00
#endif
ZOOM2 Add serial support. Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. The default serial is from the USB connector on left side of the debug board. The USB connector will produce 2 of the 4 UARTS. On your host pick the first enumeration. The details of the setting of the serial gpmc setup are not available. The values were provided by another party. The serial port set up is the same with Zoom1. Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow. The kernel bootargs are console=ttyS3,115200n8 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-05-31 10:44:37 +00:00
#if defined(CONFIG_OMAP3_ZOOM2)
extern struct serial_device zoom2_serial_device0;
extern struct serial_device zoom2_serial_device1;
extern struct serial_device zoom2_serial_device2;
extern struct serial_device zoom2_serial_device3;
#endif
PXA270: Add support for multiple serial ports. This patch adds support for multiple serial ports to the PXA target. FFUART, BTUART and STUART are supported. Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-08-30 20:57:04 +00:00
extern struct serial_device serial_ffuart_device;
extern struct serial_device serial_btuart_device;
extern struct serial_device serial_stuart_device;
Blackfin: uart: add multiple serial support This brings CONFIG_SERIAL_MULTI support to the Blackfin on-chip UARTs. Ends up adding only ~512bytes per additional UART. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-30 03:23:28 +00:00
#if defined(CONFIG_SYS_BFIN_UART)
extern void serial_register_bfin_uart(void);
extern struct serial_device bfin_serial0_device;
extern struct serial_device bfin_serial1_device;
extern struct serial_device bfin_serial2_device;
extern struct serial_device bfin_serial3_device;
#endif
extern void serial_register(struct serial_device *);
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
extern void serial_initialize(void);
stdio/device: rework function naming convention So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-05-16 10:14:54 +00:00
extern void serial_stdio_init(void);
serial: constify serial_assign() Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-18 06:49:12 +00:00
extern int serial_assign(const char *name);
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
extern void serial_reinit_all(void);
USBTTY make some function declarations easier to use. Zoom2 needs to use these declarations and the include directory is a better place from them than in the middle of the driver directory. It did not make sense to create a new file for just a couple of lines so they were appended to the serial.h Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:44 +00:00
/* For usbtty */
OMAP3 zoom2 Use usbtty if the debug board is not connected. The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:45 +00:00
#ifdef CONFIG_USB_TTY
USBTTY make some function declarations easier to use. Zoom2 needs to use these declarations and the include directory is a better place from them than in the middle of the driver directory. It did not make sense to create a new file for just a couple of lines so they were appended to the serial.h Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:44 +00:00
extern int usbtty_getc(void);
extern void usbtty_putc(const char c);
extern void usbtty_puts(const char *str);
extern int usbtty_tstc(void);
OMAP3 zoom2 Use usbtty if the debug board is not connected. The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:45 +00:00
#else
/* stubs */
#define usbtty_getc() 0
#define usbtty_putc(a)
#define usbtty_puts(a)
#define usbtty_tstc() 0
#endif /* CONFIG_USB_TTY */
mpc5121: add PSC serial communication routines Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 17:27:06 +00:00
#if defined(CONFIG_MPC512X) && defined(CONFIG_SERIAL_MULTI)
extern struct stdio_dev *open_port(int num, int baudrate);
extern int close_port(int num);
extern int write_port(struct stdio_dev *port, char *buf);
extern int read_port(struct stdio_dev *port, char *buf, int size);
#endif
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
#endif
Reference in a new issue Copy permalink