u-boot/arch/arm/include/asm/arch-sunxi/clock_sun6i.h

534 lines
19 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
/*
* sun6i clock register definitions
*
* (C) Copyright 2007-2011
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*/
#ifndef _SUNXI_CLOCK_SUN6I_H
#define _SUNXI_CLOCK_SUN6I_H
struct sunxi_ccm_reg {
u32 pll1_cfg; /* 0x00 pll1 control */
u32 reserved0;
u32 pll2_cfg; /* 0x08 pll2 control */
u32 reserved1;
u32 pll3_cfg; /* 0x10 pll3 control */
u32 reserved2;
u32 pll4_cfg; /* 0x18 pll4 control */
u32 reserved3;
u32 pll5_cfg; /* 0x20 pll5 control */
u32 reserved4;
u32 pll6_cfg; /* 0x28 pll6 control */
u32 reserved5;
u32 pll7_cfg; /* 0x30 pll7 control */
u32 sata_pll_cfg; /* 0x34 SATA pll control (R40 only) */
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 pll8_cfg; /* 0x38 pll8 control */
u32 reserved7;
u32 mipi_pll_cfg; /* 0x40 MIPI pll control */
u32 pll9_cfg; /* 0x44 pll9 control */
u32 pll10_cfg; /* 0x48 pll10 control */
u32 pll11_cfg; /* 0x4c pll11 (ddr1) control (A33 only) */
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 cpu_axi_cfg; /* 0x50 CPU/AXI divide ratio */
u32 ahb1_apb1_div; /* 0x54 AHB1/APB1 divide ratio */
u32 apb2_div; /* 0x58 APB2 divide ratio */
u32 axi_gate; /* 0x5c axi module clock gating */
u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */
u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */
u32 apb1_gate; /* 0x68 apb1 module clock gating */
u32 apb2_gate; /* 0x6c apb2 module clock gating */
u32 bus_gate4; /* 0x70 gate 4 module clock gating */
u8 res3[0xc];
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 nand0_clk_cfg; /* 0x80 nand0 clock control */
u32 nand1_clk_cfg; /* 0x84 nand1 clock control */
u32 sd0_clk_cfg; /* 0x88 sd0 clock control */
u32 sd1_clk_cfg; /* 0x8c sd1 clock control */
u32 sd2_clk_cfg; /* 0x90 sd2 clock control */
u32 sd3_clk_cfg; /* 0x94 sd3 clock control */
u32 ts_clk_cfg; /* 0x98 transport stream clock control */
u32 ss_clk_cfg; /* 0x9c security system clock control */
u32 spi0_clk_cfg; /* 0xa0 spi0 clock control */
u32 spi1_clk_cfg; /* 0xa4 spi1 clock control */
u32 spi2_clk_cfg; /* 0xa8 spi2 clock control */
u32 spi3_clk_cfg; /* 0xac spi3 clock control */
u32 i2s0_clk_cfg; /* 0xb0 I2S0 clock control*/
u32 i2s1_clk_cfg; /* 0xb4 I2S1 clock control */
u32 reserved10[2];
u32 spdif_clk_cfg; /* 0xc0 SPDIF clock control */
u32 reserved11;
u32 sata_clk_cfg; /* 0xc8 SATA clock control (R40 only) */
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 usb_clk_cfg; /* 0xcc USB clock control */
#ifdef CONFIG_MACH_SUN8I_R40
u32 cir0_clk_cfg; /* 0xd0 CIR0 clock control (R40 only) */
#else
u32 gmac_clk_cfg; /* 0xd0 GMAC clock control (not for R40) */
#endif
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 reserved12[7];
u32 mdfs_clk_cfg; /* 0xf0 MDFS clock control */
u32 dram_clk_cfg; /* 0xf4 DRAM configuration clock control */
u32 dram_pll_cfg; /* 0xf8 PLL_DDR cfg register, A33 only */
u32 mbus_reset; /* 0xfc MBUS reset control, A33 only */
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 dram_clk_gate; /* 0x100 DRAM module gating */
#ifdef CONFIG_SUNXI_DE2
u32 de_clk_cfg; /* 0x104 DE module clock */
#else
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 be0_clk_cfg; /* 0x104 BE0 module clock */
#endif
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 be1_clk_cfg; /* 0x108 BE1 module clock */
u32 fe0_clk_cfg; /* 0x10c FE0 module clock */
u32 fe1_clk_cfg; /* 0x110 FE1 module clock */
u32 mp_clk_cfg; /* 0x114 MP module clock */
#ifdef CONFIG_SUNXI_DE2
u32 lcd0_clk_cfg; /* 0x118 LCD0 module clock */
u32 lcd1_clk_cfg; /* 0x11c LCD1 module clock */
#else
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 lcd0_ch0_clk_cfg; /* 0x118 LCD0 CH0 module clock */
u32 lcd1_ch0_clk_cfg; /* 0x11c LCD1 CH0 module clock */
#endif
u32 tve_clk_cfg; /* 0x120 H3/H5 TVE module clock */
u32 reserved14[2];
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 lcd0_ch1_clk_cfg; /* 0x12c LCD0 CH1 module clock */
u32 lcd1_ch1_clk_cfg; /* 0x130 LCD1 CH1 module clock */
u32 csi0_clk_cfg; /* 0x134 CSI0 module clock */
u32 csi1_clk_cfg; /* 0x138 CSI1 module clock */
u32 ve_clk_cfg; /* 0x13c VE module clock */
u32 adda_clk_cfg; /* 0x140 ADDA module clock */
u32 avs_clk_cfg; /* 0x144 AVS module clock */
u32 dmic_clk_cfg; /* 0x148 Digital Mic module clock*/
u32 reserved15;
u32 hdmi_clk_cfg; /* 0x150 HDMI module clock */
#ifdef CONFIG_SUNXI_DE2
u32 hdmi_slow_clk_cfg; /* 0x154 HDMI slow module clock */
#else
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 ps_clk_cfg; /* 0x154 PS module clock */
#endif
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 mtc_clk_cfg; /* 0x158 MTC module clock */
u32 mbus0_clk_cfg; /* 0x15c MBUS0 module clock */
u32 mbus1_clk_cfg; /* 0x160 MBUS1 module clock */
#ifdef CONFIG_MACH_SUN8I_R40
u32 gmac_clk_cfg; /* 0x164 GMAC clock control (R40 only) */
#else
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 reserved16;
#endif
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 mipi_dsi_clk_cfg; /* 0x168 MIPI DSI clock control */
u32 mipi_csi_clk_cfg; /* 0x16c MIPI CSI clock control */
u32 reserved17[4];
u32 iep_drc0_clk_cfg; /* 0x180 IEP DRC0 module clock */
u32 iep_drc1_clk_cfg; /* 0x184 IEP DRC1 module clock */
u32 iep_deu0_clk_cfg; /* 0x188 IEP DEU0 module clock */
u32 iep_deu1_clk_cfg; /* 0x18c IEP DEU1 module clock */
u32 reserved18[4];
u32 gpu_core_clk_cfg; /* 0x1a0 GPU core clock config */
u32 gpu_mem_clk_cfg; /* 0x1a4 GPU memory clock config */
u32 gpu_hyd_clk_cfg; /* 0x1a0 GPU HYD clock config */
u32 reserved19[21];
u32 pll_lock; /* 0x200 PLL Lock Time */
u32 pll1_lock; /* 0x204 PLL1 Lock Time */
u32 reserved20[6];
u32 pll1_bias_cfg; /* 0x220 PLL1 Bias config */
u32 pll2_bias_cfg; /* 0x224 PLL2 Bias config */
u32 pll3_bias_cfg; /* 0x228 PLL3 Bias config */
u32 pll4_bias_cfg; /* 0x22c PLL4 Bias config */
u32 pll5_bias_cfg; /* 0x230 PLL5 Bias config */
u32 pll6_bias_cfg; /* 0x234 PLL6 Bias config */
u32 pll7_bias_cfg; /* 0x238 PLL7 Bias config */
u32 pll8_bias_cfg; /* 0x23c PLL8 Bias config */
u32 mipi_bias_cfg; /* 0x240 MIPI Bias config */
u32 pll9_bias_cfg; /* 0x244 PLL9 Bias config */
u32 pll10_bias_cfg; /* 0x248 PLL10 Bias config */
u32 reserved21[5];
u32 pll5_tuning_cfg; /* 0x260 PLL5 Tuning config */
u32 reserved21_5[7];
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 pll1_pattern_cfg; /* 0x280 PLL1 Pattern config */
u32 pll2_pattern_cfg; /* 0x284 PLL2 Pattern config */
u32 pll3_pattern_cfg; /* 0x288 PLL3 Pattern config */
u32 pll4_pattern_cfg; /* 0x28c PLL4 Pattern config */
u32 pll5_pattern_cfg; /* 0x290 PLL5 Pattern config */
u32 pll6_pattern_cfg; /* 0x294 PLL6 Pattern config */
u32 pll7_pattern_cfg; /* 0x298 PLL7 Pattern config */
u32 pll8_pattern_cfg; /* 0x29c PLL8 Pattern config */
u32 mipi_pattern_cfg; /* 0x2a0 MIPI Pattern config */
u32 pll9_pattern_cfg; /* 0x2a4 PLL9 Pattern config */
u32 pll10_pattern_cfg; /* 0x2a8 PLL10 Pattern config */
u32 pll11_pattern_cfg0; /* 0x2ac PLL11 Pattern config0, A33 only */
u32 pll11_pattern_cfg1; /* 0x2b0 PLL11 Pattern config0, A33 only */
u32 reserved22[3];
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
u32 ahb_reset0_cfg; /* 0x2c0 AHB1 Reset 0 config */
u32 ahb_reset1_cfg; /* 0x2c4 AHB1 Reset 1 config */
u32 ahb_reset2_cfg; /* 0x2c8 AHB1 Reset 2 config */
u32 reserved23;
u32 apb1_reset_cfg; /* 0x2d0 APB1 Reset config */
u32 reserved24;
u32 apb2_reset_cfg; /* 0x2d8 APB2 Reset config */
u32 reserved25[5];
u32 ccu_sec_switch; /* 0x2f0 CCU Security Switch, H3 only */
u32 reserved26[11];
u32 pll_lock_ctrl; /* 0x320 PLL lock control, R40 only */
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
};
/* apb2 bit field */
#define APB2_CLK_SRC_LOSC (0x0 << 24)
#define APB2_CLK_SRC_OSC24M (0x1 << 24)
#define APB2_CLK_SRC_PLL6 (0x2 << 24)
#define APB2_CLK_SRC_MASK (0x3 << 24)
#define APB2_CLK_RATE_N_1 (0x0 << 16)
#define APB2_CLK_RATE_N_2 (0x1 << 16)
#define APB2_CLK_RATE_N_4 (0x2 << 16)
#define APB2_CLK_RATE_N_8 (0x3 << 16)
#define APB2_CLK_RATE_N_MASK (3 << 16)
#define APB2_CLK_RATE_M(m) (((m)-1) << 0)
#define APB2_CLK_RATE_M_MASK (0x1f << 0)
/* apb2 gate field */
#define APB2_GATE_UART_SHIFT (16)
#define APB2_GATE_UART_MASK (0xff << APB2_GATE_UART_SHIFT)
#define APB2_GATE_TWI_SHIFT (0)
#define APB2_GATE_TWI_MASK (0xf << APB2_GATE_TWI_SHIFT)
/* cpu_axi_cfg bits */
#define AXI_DIV_SHIFT 0
#define ATB_DIV_SHIFT 8
#define CPU_CLK_SRC_SHIFT 16
#define AXI_DIV_1 0
#define AXI_DIV_2 1
#define AXI_DIV_3 2
#define AXI_DIV_4 3
#define ATB_DIV_1 0
#define ATB_DIV_2 1
#define ATB_DIV_4 2
#define AHB_DIV_1 0
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
#define CPU_CLK_SRC_OSC24M 1
#define CPU_CLK_SRC_PLL1 2
#define CCM_PLL1_CTRL_M(n) ((((n) - 1) & 0x3) << 0)
#define CCM_PLL1_CTRL_K(n) ((((n) - 1) & 0x3) << 4)
#define CCM_PLL1_CTRL_N(n) ((((n) - 1) & 0x1f) << 8)
#define CCM_PLL1_CTRL_P(n) (((n) & 0x3) << 16)
#define CCM_PLL1_CTRL_EN (0x1 << 31)
#define CCM_PLL3_CTRL_M_SHIFT 0
#define CCM_PLL3_CTRL_M_MASK (0xf << CCM_PLL3_CTRL_M_SHIFT)
#define CCM_PLL3_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_PLL3_CTRL_N_SHIFT 8
#define CCM_PLL3_CTRL_N_MASK (0x7f << CCM_PLL3_CTRL_N_SHIFT)
#define CCM_PLL3_CTRL_N(n) ((((n) - 1) & 0x7f) << 8)
#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 24)
#define CCM_PLL3_CTRL_LOCK (0x1 << 28)
#define CCM_PLL3_CTRL_EN (0x1 << 31)
#define CCM_PLL5_CTRL_M(n) ((((n) - 1) & 0x3) << 0)
#define CCM_PLL5_CTRL_K(n) ((((n) - 1) & 0x3) << 4)
#define CCM_PLL5_CTRL_N(n) ((((n) - 1) & 0x1f) << 8)
#define CCM_PLL5_CTRL_UPD (0x1 << 20)
#define CCM_PLL5_CTRL_SIGMA_DELTA_EN (0x1 << 24)
#define CCM_PLL5_CTRL_EN (0x1 << 31)
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
#define PLL6_CFG_DEFAULT 0x90041811 /* 600 MHz */
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
#define CCM_PLL6_CTRL_N_SHIFT 8
#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT)
#define CCM_PLL6_CTRL_K_SHIFT 4
#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT)
#define CCM_PLL6_CTRL_LOCK (1 << 28)
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
#define CCM_SATA_PLL_DEFAULT 0x90005811 /* 100 MHz */
#define CCM_MIPI_PLL_CTRL_M_SHIFT 0
#define CCM_MIPI_PLL_CTRL_M_MASK (0xf << CCM_MIPI_PLL_CTRL_M_SHIFT)
#define CCM_MIPI_PLL_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_MIPI_PLL_CTRL_K_SHIFT 4
#define CCM_MIPI_PLL_CTRL_K_MASK (0x3 << CCM_MIPI_PLL_CTRL_K_SHIFT)
#define CCM_MIPI_PLL_CTRL_K(n) ((((n) - 1) & 0x3) << 4)
#define CCM_MIPI_PLL_CTRL_N_SHIFT 8
#define CCM_MIPI_PLL_CTRL_N_MASK (0xf << CCM_MIPI_PLL_CTRL_N_SHIFT)
#define CCM_MIPI_PLL_CTRL_N(n) ((((n) - 1) & 0xf) << 8)
#define CCM_MIPI_PLL_CTRL_LDO_EN (0x3 << 22)
#define CCM_MIPI_PLL_CTRL_EN (0x1 << 31)
#define CCM_PLL10_CTRL_M_SHIFT 0
#define CCM_PLL10_CTRL_M_MASK (0xf << CCM_PLL10_CTRL_M_SHIFT)
#define CCM_PLL10_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_PLL10_CTRL_N_SHIFT 8
#define CCM_PLL10_CTRL_N_MASK (0x7f << CCM_PLL10_CTRL_N_SHIFT)
#define CCM_PLL10_CTRL_N(n) ((((n) - 1) & 0x7f) << 8)
#define CCM_PLL10_CTRL_INTEGER_MODE (0x1 << 24)
#define CCM_PLL10_CTRL_LOCK (0x1 << 28)
#define CCM_PLL10_CTRL_EN (0x1 << 31)
#define CCM_PLL11_CTRL_N(n) ((((n) - 1) & 0x3f) << 8)
#define CCM_PLL11_CTRL_SIGMA_DELTA_EN (0x1 << 24)
#define CCM_PLL11_CTRL_UPD (0x1 << 30)
#define CCM_PLL11_CTRL_EN (0x1 << 31)
#define CCM_PLL5_TUN_LOCK_TIME(x) (((x) & 0x7) << 24)
#define CCM_PLL5_TUN_LOCK_TIME_MASK CCM_PLL5_TUN_LOCK_TIME(0x7)
#define CCM_PLL5_TUN_INIT_FREQ(x) (((x) & 0x7f) << 16)
#define CCM_PLL5_TUN_INIT_FREQ_MASK CCM_PLL5_TUN_INIT_FREQ(0x7f)
#if defined(CONFIG_MACH_SUN50I)
/* AHB1=100MHz failsafe setup from the FEL mode, usable with PMIC defaults */
#define AHB1_ABP1_DIV_DEFAULT 0x00003190 /* AHB1=PLL6/6,APB1=AHB1/2 */
#else
#define AHB1_ABP1_DIV_DEFAULT 0x00003180 /* AHB1=PLL6/3,APB1=AHB1/2 */
#endif
#define AXI_GATE_OFFSET_DRAM 0
/* ahb_gate0 offsets */
#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.
*/
#define AHB_GATE_OFFSET_USB_OHCI3 31
#define AHB_GATE_OFFSET_USB_OHCI2 30
#define AHB_GATE_OFFSET_USB_OHCI1 29
#define AHB_GATE_OFFSET_USB_OHCI0 28
#define AHB_GATE_OFFSET_USB_EHCI3 27
#define AHB_GATE_OFFSET_USB_EHCI2 26
#define AHB_GATE_OFFSET_USB_EHCI1 25
#define AHB_GATE_OFFSET_USB_EHCI0 24
#elif defined(CONFIG_MACH_SUN50I)
#define AHB_GATE_OFFSET_USB_OHCI0 28
#define AHB_GATE_OFFSET_USB_OHCI1 29
#define AHB_GATE_OFFSET_USB_EHCI0 24
#define AHB_GATE_OFFSET_USB_EHCI1 25
#else
#define AHB_GATE_OFFSET_USB_OHCI1 30
#define AHB_GATE_OFFSET_USB_OHCI0 29
#define AHB_GATE_OFFSET_USB_EHCI1 27
#define AHB_GATE_OFFSET_USB_EHCI0 26
#endif
#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUNXI_H3_H5)
#define AHB_GATE_OFFSET_USB0 23
#elif !defined(CONFIG_MACH_SUN8I_R40)
#define AHB_GATE_OFFSET_USB0 24
#else
#define AHB_GATE_OFFSET_USB0 25
#define AHB_GATE_OFFSET_SATA 24
#endif
#define AHB_GATE_OFFSET_MCTL 14
#define AHB_GATE_OFFSET_GMAC 17
#define AHB_GATE_OFFSET_NAND0 13
#define AHB_GATE_OFFSET_NAND1 12
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
#define AHB_GATE_OFFSET_MMC3 11
#define AHB_GATE_OFFSET_MMC2 10
#define AHB_GATE_OFFSET_MMC1 9
#define AHB_GATE_OFFSET_MMC0 8
#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n))
#define AHB_GATE_OFFSET_DMA 6
#define AHB_GATE_OFFSET_SS 5
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
/* ahb_gate1 offsets */
#define AHB_GATE_OFFSET_DRC0 25
#define AHB_GATE_OFFSET_DE_FE0 14
#define AHB_GATE_OFFSET_DE_BE0 12
#define AHB_GATE_OFFSET_DE 12
#define AHB_GATE_OFFSET_HDMI 11
#define AHB_GATE_OFFSET_TVE 9
#ifndef CONFIG_SUNXI_DE2
#define AHB_GATE_OFFSET_LCD1 5
#define AHB_GATE_OFFSET_LCD0 4
#else
#define AHB_GATE_OFFSET_LCD1 4
#define AHB_GATE_OFFSET_LCD0 3
#endif
#define CCM_NAND_CTRL_M(x) ((x) - 1)
#define CCM_NAND_CTRL_N(x) ((x) << 16)
#define CCM_NAND_CTRL_PLL6 (0x1 << 24)
#define CCM_NAND_CTRL_ENABLE (0x1 << 31)
#define CCM_MMC_CTRL_M(x) ((x) - 1)
#define CCM_MMC_CTRL_OCLK_DLY(x) ((x) << 8)
#define CCM_MMC_CTRL_N(x) ((x) << 16)
#define CCM_MMC_CTRL_SCLK_DLY(x) ((x) << 20)
#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
#define CCM_MMC_CTRL_PLL6 (0x1 << 24)
#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
#define CCM_SATA_CTRL_ENABLE (0x1 << 31)
#define CCM_SATA_CTRL_USE_EXTCLK (0x1 << 24)
#define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
#define CCM_USB_CTRL_PHY3_RST (0x1 << 3)
/* There is no global phy clk gate on sun6i, define as 0 */
#define CCM_USB_CTRL_PHYGATE 0
#define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
#define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
#ifdef CONFIG_MACH_SUNXI_H3_H5
#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
#define CCM_USB_CTRL_OHCI2_CLK (0x1 << 18)
#define CCM_USB_CTRL_OHCI3_CLK (0x1 << 19)
#else
#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
#endif
#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5)
#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10)
#define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */
#define CCM_DRAMCLK_CFG_DIV(x) ((x - 1) << 0)
#define CCM_DRAMCLK_CFG_DIV_MASK (0xf << 0)
#define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8)
#define CCM_DRAMCLK_CFG_DIV0_MASK (0xf << 8)
#define CCM_DRAMCLK_CFG_SRC_PLL5 (0x0 << 20)
#define CCM_DRAMCLK_CFG_SRC_PLL6x2 (0x1 << 20)
#define CCM_DRAMCLK_CFG_SRC_PLL11 (0x1 << 20) /* A64 only */
#define CCM_DRAMCLK_CFG_SRC_MASK (0x3 << 20)
#define CCM_DRAMCLK_CFG_UPD (0x1 << 16)
#define CCM_DRAMCLK_CFG_RST (0x1 << 31)
#define CCM_DRAMPLL_CFG_SRC_PLL5 (0x0 << 16) /* Select PLL5 (DDR0) */
#define CCM_DRAMPLL_CFG_SRC_PLL11 (0x1 << 16) /* Select PLL11 (DDR1) */
#define CCM_DRAMPLL_CFG_SRC_MASK (0x1 << 16)
#define CCM_MBUS_RESET_RESET (0x1 << 31)
#define CCM_DRAM_GATE_OFFSET_DE_FE0 24
#define CCM_DRAM_GATE_OFFSET_DE_FE1 25
#define CCM_DRAM_GATE_OFFSET_DE_BE0 26
#define CCM_DRAM_GATE_OFFSET_DE_BE1 27
#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24)
#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24)
#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24)
#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24)
#define CCM_LCD_CH0_CTRL_MIPI_PLL (4 << 24)
/* No reset bit in ch0_clk_cfg (reset is controlled through ahb_reset1) */
#define CCM_LCD_CH0_CTRL_RST 0
#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31)
#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_LCD_CH1_CTRL_HALF_SCLK1 0 /* no seperate sclk1 & 2 on sun6i */
#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24)
#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24)
#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24)
#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24)
#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31)
#define CCM_LCD0_CTRL_GATE (0x1 << 31)
#define CCM_LCD0_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_LCD1_CTRL_GATE (0x1 << 31)
#define CCM_LCD1_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_HDMI_CTRL_PLL_MASK (3 << 24)
#define CCM_HDMI_CTRL_PLL3 (0 << 24)
#define CCM_HDMI_CTRL_PLL7 (1 << 24)
#define CCM_HDMI_CTRL_PLL3_2X (2 << 24)
#define CCM_HDMI_CTRL_PLL7_2X (3 << 24)
#define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30)
#define CCM_HDMI_CTRL_GATE (0x1 << 31)
#define CCM_HDMI_SLOW_CTRL_DDC_GATE (1 << 31)
#define CCM_TVE_CTRL_GATE (0x1 << 31)
#define CCM_TVE_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#if defined(CONFIG_MACH_SUN50I)
#define MBUS_CLK_DEFAULT 0x81000002 /* PLL6x2 / 3 */
#elif defined(CONFIG_MACH_SUN8I)
#define MBUS_CLK_DEFAULT 0x81000003 /* PLL6 / 4 */
#else
#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */
#endif
#define MBUS_CLK_GATE (0x1 << 31)
#define CCM_PLL5_PATTERN 0xd1303333
#define CCM_PLL11_PATTERN 0xf5860000
/* ahb_reset0 offsets */
#ifdef CONFIG_MACH_SUN8I_R40
#define AHB_RESET_OFFSET_SATA 24
#endif
#define AHB_RESET_OFFSET_GMAC 17
#define AHB_RESET_OFFSET_MCTL 14
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
#define AHB_RESET_OFFSET_MMC3 11
#define AHB_RESET_OFFSET_MMC2 10
#define AHB_RESET_OFFSET_MMC1 9
#define AHB_RESET_OFFSET_MMC0 8
#define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n))
#define AHB_RESET_OFFSET_SS 5
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
/* ahb_reset1 offsets */
#define AHB_RESET_OFFSET_SAT 26
#define AHB_RESET_OFFSET_DRC0 25
#define AHB_RESET_OFFSET_DE_FE0 14
#define AHB_RESET_OFFSET_DE_BE0 12
#define AHB_RESET_OFFSET_DE 12
#define AHB_RESET_OFFSET_HDMI 11
#define AHB_RESET_OFFSET_HDMI2 10
#define AHB_RESET_OFFSET_TVE 9
#ifndef CONFIG_SUNXI_DE2
#define AHB_RESET_OFFSET_LCD1 5
#define AHB_RESET_OFFSET_LCD0 4
#else
#define AHB_RESET_OFFSET_LCD1 4
#define AHB_RESET_OFFSET_LCD0 3
#endif
/* ahb_reset2 offsets */
#define AHB_RESET_OFFSET_EPHY 2
#define AHB_RESET_OFFSET_LVDS 0
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
/* apb2 reset */
#define APB2_RESET_UART_SHIFT (16)
#define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT)
#define APB2_RESET_TWI_SHIFT (0)
#define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT)
/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */
#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_DE_CTRL_PLL_MASK (0xf << 24)
#define CCM_DE_CTRL_PLL3 (0 << 24)
#define CCM_DE_CTRL_PLL7 (1 << 24)
#define CCM_DE_CTRL_PLL6_2X (2 << 24)
#define CCM_DE_CTRL_PLL8 (3 << 24)
#define CCM_DE_CTRL_PLL9 (4 << 24)
#define CCM_DE_CTRL_PLL10 (5 << 24)
#define CCM_DE_CTRL_GATE (1 << 31)
/* CCM bits common to all Display Engine 2.0 clock ctrl regs */
#define CCM_DE2_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
#define CCM_DE2_CTRL_PLL_MASK (3 << 24)
#define CCM_DE2_CTRL_PLL6_2X (0 << 24)
#define CCM_DE2_CTRL_PLL10 (1 << 24)
#define CCM_DE2_CTRL_GATE (0x1 << 31)
/* CCU security switch, H3 only */
#define CCM_SEC_SWITCH_MBUS_NONSEC (1 << 2)
#define CCM_SEC_SWITCH_BUS_NONSEC (1 << 1)
#define CCM_SEC_SWITCH_PLL_NONSEC (1 << 0)
#ifndef __ASSEMBLY__
void clock_set_pll1(unsigned int hz);
void clock_set_pll3(unsigned int hz);
void clock_set_pll3_factors(int m, int n);
void clock_set_pll5(unsigned int clk, bool sigma_delta_enable);
void clock_set_pll10(unsigned int hz);
void clock_set_pll11(unsigned int clk, bool sigma_delta_enable);
void clock_set_mipi_pll(unsigned int hz);
unsigned int clock_get_pll3(void);
unsigned int clock_get_pll6(void);
unsigned int clock_get_mipi_pll(void);
#endif
ARM: sun6i: Add clock support This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-03 12:16:25 +00:00
#endif /* _SUNXI_CLOCK_SUN6I_H */