This function/lang_item was introduced in #104321 as a temporary workaround of future lowering.
The usage and need for it went away in #104833.
After a bootstrap update, the function itself can be removed from `std`.
Update the version of musl used on `*-linux-musl` targets to 1.2.3
Update the version of musl used on our Linux musl targets from 1.1.24 to 1.2.3 as proposed in rust-lang/compiler-team#572. musl 1.2.3 is the latest version of musl and supports the same range of Linux kernels as the 1.1 series. As such, it does not affect the minimum supported version of Linux for any of the musl targets.
One of the major musl 1.2 features is support for [time64](https://musl.libc.org/time64.html). This support is both source and ABI compatible with programs built against musl 1.1 and so updating the musl version for these targets should not cause Rust programs to fail to run or compile (a [crater run](https://github.com/rust-lang/rust/pull/107129#issuecomment-1407196104) has been completed which demonstrates this for the `i686-unknown-linux-musl` target).
Once this change reaches stable, the `libc` crate will then be able to [update their definitions to support 64-bit time](https://github.com/rust-lang/libc/pull/3068), matching the default musl 1.2 APIs exactly.
Fixes#91178
ci: upgrade and refactor crosstool-ng builders
The first commit upgrades our builders from crosstool-ng 1.24.0 to 1.25.0. There are otherwise no changes intended to the toolchains we're using, but there are some minor version upgrades as a result, especially GCC 8.3.0 to 8.5.0. The newer crosstool-ng will position us well to make toolchain upgrades in the future though, as we were maxed out before and it now goes up to GCC 11.
The second commit refactors our config management to only commit a "mini-defconfig" for each target, produced by `ct-ng savedefconfig`. This makes it much clearer which settings we're actually changing, and also makes it easier to ensure consistency for things like mirror management.
Optimize builder sizes
The infra-team is continuously monitoring the efficiency of the CI system in an effort to improve overall build times and resource usage. Some builders have used much less than their allocated resources, so we are testing smaller builder sizes for them.
r? `@pietroalbini`
Don't validate constants in const propagation
Validation is neither necessary nor desirable.
The constant validation is already omitted at mir-opt-level >= 3, so there there are not changes in MIR test output (the propagation of invalid constants is covered by an existing test in tests/mir-opt/const_prop/invalid_constant.rs).
Parallelize initial Rust download in bootstrap
Parallelize the initial download of Rust in `bootstrap.py`
`time ./x.py --help` after `rm -r build`
Before: 33s
After: 27s
`inline(always)` for `lt`/`le`/`ge`/`gt` on integers and floats
I happened to notice one of these not getting inlined as part of `Range::next` in <https://rust.godbolt.org/z/4WKWWxj1G>
```rust
bb1: {
StorageLive(_5);
_6 = &mut _4;
StorageLive(_21);
StorageLive(_14);
StorageLive(_15);
_15 = &((*_6).0: usize);
StorageLive(_16);
_16 = &((*_6).1: usize);
_14 = <usize as PartialOrd>::lt(move _15, move _16) -> bb7;
}
```
So since a call for something that's just one instruction is never the right choice, `#[inline(always)]` seems appropriate, like we have it on things like the rotate methods on integers.
Remove `QueryEngine` trait
This removes the `QueryEngine` trait and `Queries` from `rustc_query_impl` and replaced them with function pointers and fields in `QuerySystem`. As a side effect `OnDiskCache` is moved back into `rustc_middle` and the `OnDiskCache` trait is also removed.
This has a couple of benefits.
- `TyCtxt` is used in the query system instead of the removed `QueryCtxt` which is larger.
- Function pointers are more flexible to work with. A variant of https://github.com/rust-lang/rust/pull/107802 is included which avoids the double indirection. For https://github.com/rust-lang/rust/pull/108938 we can name entry point `__rust_end_short_backtrace` to avoid some overhead. For https://github.com/rust-lang/rust/pull/108062 it avoids the duplicate `QueryEngine` structs.
- `QueryContext` now implements `DepContext` which avoids many `dep_context()` calls in `rustc_query_system`.
- The `rustc_driver` size is reduced by 0.33%, hopefully that means some bootstrap improvements.
- This avoids the unsafe code around the `QueryEngine` trait.
r? `@cjgillot`
Improve niche placement by trying two strategies and picking the better result
Fixes#104807Fixes#105371
Determining which sort order is better requires calculating the struct size (so we can calculate the niche offset). But that in turn depends on the field order, so happens after sorting. So the simple way to solve that is to run the whole thing twice and pick the better result.
1st commit is just code motion, the meat is in the later ones.
Use MIR's `Offset` for pointer `add` too
~~Status: draft while waiting for #110822 to land, since this is built atop that.~~
~~r? `@ghost~~`
Canonical Rust code has mostly moved to `add`/`sub` on pointers, which take `usize`, instead of `offset` which takes `isize`. (And, relatedly, when `sub_ptr` was added it turned out it replaced every single in-tree use of `offset_from`, because `usize` is just so much more useful than `isize` in Rust.)
Unfortunately, `intrinsics::offset` could only accept `*const` and `isize`, so there's a *huge* amount of type conversions back and forth being done. They're identity conversions in the backend, but still end up producing quite a lot of unhelpful MIR.
This PR changes `intrinsics::offset` to accept `*const` *and* `*mut` along with `isize` *and* `usize`. Conveniently, the backends and CTFE already handle this, since MIR's `BinOp::Offset` [already supports all four combinations](adaac6b166/compiler/rustc_const_eval/src/transform/validate.rs (L523-L528)).
To demonstrate the difference, I added some `mir-opt/pre-codegen/` tests around slice indexing. Here's the difference to `[T]::get_mut`, since it uses `<*mut _>::add` internally:
```diff
`@@` -79,30 +70,21 `@@` fn slice_get_mut_usize(_1: &mut [u32], _2: usize) -> Option<&mut u32> {
StorageLive(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageLive(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
_9 = _8 as *mut u32 (PtrToPtr); // scope 11 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _13 = _2 as isize (IntToInt); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _15 = _9 as *const u32 (Pointer(MutToConstPointer)); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _14 = Offset(move _15, _13); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _7 = move _14 as *mut u32 (PtrToPtr); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
+ _7 = Offset(_9, _2); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
StorageDead(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_11); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
```
1c1c8e442a (diff-a841b6a4538657add3f39bc895744331453d0625e7aace128b1f604f0b63c8fdR80)
`remove_dir_all`: try deleting the directory even if `FILE_LIST_DIRECTORY` access is denied
If opening a directory with `FILE_LIST_DIRECTORY` access fails then we should try opening without requesting that access. We may still be able to delete it if it's empty or a link.
Fixes https://github.com/rust-lang/cargo/issues/12042
Add some missing built-in lints
(and also sort them, so this is best reviewed one commit at a time)
Fixes#110911
I wonder if there's a good way to detect when a lint is built-in (i.e. not associated to a lint pass). If so, it needs to be added to this list, or else we're unable to `allow` or `deny` it. Leaving that for future work, I guess...
Migrate trivially translatable `rustc_parse` diagnostics
cc #100717
Migrate diagnostics in `rustc_parse` which are emitted in a single statement. I worked on this by expanding the lint introduced in #108760, although that isn't included here as there is much more work to be done to satisfy it
More core::fmt::rt cleanup.
- Removes the `V1` suffix from the `Argument` and `Flag` types.
- Moves more of the format_args lang items into the `core::fmt::rt` module. (The only remaining lang item in `core::fmt` is `Arguments` itself, which is a public type.)
Part of https://github.com/rust-lang/rust/issues/99012
Follow-up to https://github.com/rust-lang/rust/pull/110616
Move the WorkerLocal type from the rustc-rayon fork into rustc_data_structures
This PR moves the definition of the `WorkerLocal` type from `rustc-rayon` into `rustc_data_structures`. This is enabled by the introduction of the `Registry` type which allows you to group up threads to be used by `WorkerLocal` which is basically just an array with an per thread index. The `Registry` type mirrors the one in Rayon and each Rayon worker thread is also registered with the new `Registry`. Safety for `WorkerLocal` is ensured by having it keep a reference to the registry and checking on each access that we're still on the group of threads associated with the registry used to construct it.
Accessing a `WorkerLocal` is micro-optimized due to it being hot since it's used for most arena allocations.
Performance is slightly improved for the parallel compiler:
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.9992s</td><td align="right">1.9949s</td><td align="right"> -0.21%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2977s</td><td align="right">0.2970s</td><td align="right"> -0.22%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">1.1335s</td><td align="right">1.1315s</td><td align="right"> -0.18%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.8235s</td><td align="right">1.8171s</td><td align="right"> -0.35%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">6.9047s</td><td align="right">6.8930s</td><td align="right"> -0.17%</td></tr><tr><td>Total</td><td align="right">12.1586s</td><td align="right">12.1336s</td><td align="right"> -0.21%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9977s</td><td align="right"> -0.23%</td></tr></table>
cc `@SparrowLii`
Revert "Download the GCC sources insecurely"
This reverts commit 3da037f82988b8b3aca2ce13c5c81ba975923cab.
This workaround was added after TLS problems with Debian 6 were noted in <https://github.com/rust-lang/rust/pull/86586#issuecomment-868355356>, but we should be well past that since #95026, where our oldest images are now based on CentOS 7.
Rewrite MemDecoder around pointers not a slice
This is basically https://github.com/rust-lang/rust/pull/109910 but I'm being a lot more aggressive. The pointer-based structure means that it makes a lot more sense to absorb more complexity into `MemDecoder`, most of the diff is just complexity moving from one place to another.
The primary argument for this structure is that we only incur a single bounds check when doing multi-byte reads from a `MemDecoder`. With the slice-based implementation we need to do those with `data[position..position + len]` , which needs to account for `position + len` wrapping. It would be possible to dodge the first bounds check if we stored a slice that starts at `position`, but that would require updating the pointer and length on every read.
This PR also embeds the failure path in a separate function, which means that this PR should subsume all the perf wins observed in https://github.com/rust-lang/rust/pull/109867.
Add shortcut for Grisu3 algorithm.
While Grisu3 is way more faster for most numbers compare to Dragon4, the fall back to Dragon4 procedure for certain numbers could cause some performance regressions compare to use Dragon4 directly. Mitigating the regression caused by falling back is important for a largely used core library.
In Grisu3 algorithm implementation, there's a shortcut to jump out earlier when the fractional or integrals cannot meet the requirement of requested digits. This could significantly improve the performance of converting floating number to string as it falls back even without starting trying the algorithm.
The original idea is from the [.NET implementation](https://github.com/dotnet/runtime/blob/main/src/libraries/System.Private.CoreLib/src/System/Number.Grisu3.cs#L602-L615) and the code was originally added in [this PR](https://github.com/dotnet/coreclr/pull/14646#issuecomment-350942050). This shortcut has been shipped long time ago and has been proved working.
Fix#110129
Break up long function in trait selection error reporting + clean up nearby code
- Move blocks of code into their own functions
- Replace a few function argument types with their type aliases
- Create "AppendConstMessage" enum to replace a nested `Option`.
Allow older LLVM versions to have missing components
This check was introduced by #77280 to ensure that all tests that are filtered by LLVM component are actually tested in CI. However this causes issues for new targets (e.g. #101069) where support is only available on the latest LLVM version.
This PR restricts the tests to only CI jobs that use the latest LLVM version.
Run various queries from other queries instead of explicitly in phases
These are just legacy leftovers from when rustc didn't have a query system. While there are more cleanups of this sort that can be done here, I want to land them in smaller steps.
This phased order of query invocations was already a lie, as any query that looks at types (e.g. the wf checks run before) can invoke e.g. const eval which invokes borrowck, which invokes typeck, ...
Limit read size in `File::read_to_end` loop
Fixes#110650.
Windows file reads have perf overhead that's proportional to the buffer size. When we have a reasonable expectation that we know the file size, we can set a reasonable upper bound for the size of the buffer in one read call.
Expect that equating a projection term always succeeds in new solver
These should never fail. If they do, we have a problem with the logic that replaces a projection goal's term with an unconstrained infer var. Let's make sure we ICE in that case.
Clone region var origins instead of taking them in borrowck
Fixes an issue with the new solver where reporting a borrow-checker error ICEs because it calls `InferCtxt::evaluate_obligation`.
This also removes a handful of unnecessary `tcx.infer_ctxt().build()` calls that are only there to mitigate this same exact issue, but with the old solver.
Fixescompiler-errors/next-solver-hir-issues#12.
----
This implements `@aliemjay's` solution where we just don't *take* the region constraints, but clone them. This potentially makes it easier to write a bug about taking region constraints twice or never at all, but again, not many folks are touching this code.
Report allocation errors as panics
OOM is now reported as a panic but with a custom payload type (`AllocErrorPanicPayload`) which holds the layout that was passed to `handle_alloc_error`.
This should be review one commit at a time:
- The first commit adds `AllocErrorPanicPayload` and changes allocation errors to always be reported as panics.
- The second commit removes `#[alloc_error_handler]` and the `alloc_error_hook` API.
ACP: https://github.com/rust-lang/libs-team/issues/192Closes#51540Closes#51245
Remove some uses of dynamic dispatch during monomorphization/partitioning.
This removes a few uses of dynamic dispatch and instead uses generics, as well as an enum to allow for other partitioning methods to be added later.
Add offset_of! macro (RFC 3308)
Implements https://github.com/rust-lang/rfcs/pull/3308 (tracking issue #106655) by adding the built in macro `core::mem::offset_of`. Two of the future possibilities are also implemented:
* Nested field accesses (without array indexing)
* DST support (for `Sized` fields)
I wrote this a few months ago, before the RFC merged. Now that it's merged, I decided to rebase and finish it.
cc `@thomcc` (RFC author)
Deduplicate unreachable blocks, for real this time
In https://github.com/rust-lang/rust/pull/106428 (in particular 41eda69516) we noticed that inlining `unreachable_unchecked` can produce duplicate unreachable blocks. So we improved two MIR optimizations: `SimplifyCfg` was given a simplify to deduplicate unreachable blocks, then `InstCombine` was given a combiner to deduplicate switch targets that point at the same block. The problem is that change doesn't actually work.
Our current pass order is
```
SimplifyCfg (does nothing relevant to this situation)
Inline (produces multiple unreachable blocks)
InstCombine (doesn't do anything here, oops)
SimplifyCfg (produces the duplicate SwitchTargets that InstCombine is looking for)
```
So in here, I have factored out the specific function from `InstCombine` and placed it inside the simplify that produces the case it is looking for. This should ensure that it runs in the scenario it was designed for.
Fixes https://github.com/rust-lang/rust/issues/110551
r? `@cjgillot`
Added byte position range for `proc_macro::Span`
Currently, the [`Debug`](https://doc.rust-lang.org/beta/proc_macro/struct.Span.html#impl-Debug-for-Span) implementation for [`proc_macro::Span`](https://doc.rust-lang.org/beta/proc_macro/struct.Span.html#) calls the debug function implemented in the trait implementation of `server::Span` for the type `Rustc` in the `rustc-expand` crate.
The current implementation, of the referenced function, looks something like this:
```rust
fn debug(&mut self, span: Self::Span) -> String {
if self.ecx.ecfg.span_debug {
format!("{:?}", span)
} else {
format!("{:?} bytes({}..{})", span.ctxt(), span.lo().0, span.hi().0)
}
}
```
It returns the byte position of the [`Span`](https://doc.rust-lang.org/beta/proc_macro/struct.Span.html#) as an interpolated string.
Because this is currently the only way to get a spans position in the file, I might lead someone, who is interested in this information, to parsing this interpolated string back into a range of bytes, which I think is a very non-rusty way.
The proposed `position()`, method implemented in this PR, gives the ability to directly get this info.
It returns a [`std::ops::Range`](https://doc.rust-lang.org/std/ops/struct.Range.html#) wrapping the lowest and highest byte of the [`Span`](https://doc.rust-lang.org/beta/proc_macro/struct.Span.html#).
I put it behind the `proc_macro_span` feature flag because many of the other functions that have a similar footprint also are annotated with it, I don't actually know if this is right.
It would be great if somebody could take a look at this, thank you very much in advanced.
