# Description
Seems like I developed a bit of a bad habit of trying to link
```rust
/// [`.foo()`]
```
in docstrings, and this just doesn't work automatically; you have to do
```rust
/// [`.foo()`](Self::foo)
```
if you want it to actually link. I think I found and replaced all of
these.
# User-Facing Changes
Just docs.
# Description
Just realized I hadn't been cleaning up the arguments added to the
`Stack` after the `CallDecl` engine call was finished, so there could be
a bit of a memory leak if a plugin made many calls during the duration
of a single plugin call. This is a quick patch to that.
I'm probably going to revise how this all works at some point soon
because I think it is a bit of a pitfall. It would be good to make it
much more difficult to make a mistake with it, perhaps with a guard like
Ian did for the redirection stuff.
# After Submitting
- [ ] release with 0.96.1
# Description
[Discovered](https://discord.com/channels/601130461678272522/614593951969574961/1266503282554179604)
by `@warp` on Discord.
The IR compiler was not properly setting redirect modes for
subexpressions because `FullCellPath` was always being compiled with
capture-out redirection. This is the correct behavior if there is a tail
to the `FullCellPath`, as we need the value in order to try to extract
anything from it (although this is unlikely to work) - however, the
parser also generates `FullCellPath`s with an empty tail quite often,
including for bare subexpressions.
Because of this, the following did not behave as expected:
```nushell
(docker run -it --rm alpine)
```
Capturing the output meant that `docker` didn't have direct access to
the terminal as a TTY.
As this is a minor bug fix, it should be okay to include in the 0.96.1
patch release.
# User-Facing Changes
- Fixes the bug as described when running with IR evaluation enabled.
# Tests + Formatting
I added a test for this, though we're not currently running all tests
with IR on the CI, but it should ensure this behaviour is consistent.
The equivalent minimum repro I could find was:
```nushell
(nu --testbin cococo); null
```
as this should cause the `cococo` message to appear on stdout, and if
Nushell is capturing the output, it would be discarded instead.
# Description
Made a mistake when fixing this for IR. The default behavior with no
options set is to list everything. Restored that.
This should go in the 0.96.1 patch release.
# Tests + Formatting
Added regression test.
# Description
Fixes#13441.
I must have forgotten that `Expr::Range` can contain other expressions,
so I wasn't searching for `$in` to replace within it. Easy fix.
# User-Facing Changes
Bug fix, ranges like `6 | 3..$in` work as expected now.
# Tests + Formatting
Added regression test.
# Description
Every so ofter wikipedia changes the column names which breaks the query
example. It would be good to make query web's table extraction to be
smart enough to find tables that are close. This PR fixes the example.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Setting metadata on a byte stream converts it to a list stream. This PR
makes it so that `metadata set` does not alter its input besides the
metadata.
```nushell
open --raw test.json
| metadata set --content-type application/json
| http post https://httpbin.org/post
```
# Description
This corrects the parsing of unknown arguments provided to known
externals to behave exactly like external arguments passed to normal
external calls.
I've done this by adding a `SyntaxShape::ExternalArgument` which
triggers the same parsing rules.
Because I didn't like how the highlighting looked, I modified the
flattener to emit `ExternalArg` flat shapes for arguments that have that
syntax shape and are plain strings/globs. This is the same behavior that
external calls have.
Aside from passing the tests, I've also checked manually that the
completer seems to work adequately. I can confirm that specified
positional arguments get completion according to their specified type
(including custom completions), and then anything remaining gets
filepath style completion, as you'd expect from an external command.
Thanks to @OJarrisonn for originally finding this issue.
# User-Facing Changes
- Unknown args are now parsed according to their specified syntax shape,
rather than `Any`. This may be a breaking change, though I think it's
extremely unlikely in practice.
- The unspecified arguments of known externals are now highlighted /
flattened identically to normal external arguments, which makes it more
clear how they're being interpreted, and should help the completer
function properly.
- Known externals now have an implicit rest arg if not specified named
`args`, with a syntax shape of `ExternalArgument`.
# Tests + Formatting
Tests added for the new behaviour. Some old tests had to be corrected to
match.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] release notes (bugfix, and debatable whether it's a breaking
change)
# Description
Adds a `--quiet` flag to the `watch` command, silencing the message
usually shown when invoking `watch`.
Resolves#13411
As implemented, `--quiet` is orthogonal to `--verbose`. I'm open to
improving the flag's name, behaviour and/or documentation to make it
more user-friendly, as I realise this may be surprising as-is.
```
> watch path {|a b c| echo $a $b $c}
Now watching files at "/home/user/path". Press ctrl+c to abort.
───┬───────────────────────
0 │ Remove
1 │ /home/user/path
2 │
───┴───────────────────────
^C
> watch --quiet path {|a b c| echo $a $b $c}
───┬───────────────────────
0 │ Remove
1 │ /home/user/path
2 │
───┴───────────────────────
^C
```
# User-Facing Changes
Adds `--quiet`/`-q` flag to `watch`, which removes the initial status
message.
This tiny PR improves the documentation of the `reduce` command by
explicitly stating the direction of reduction, i.e. from left to right,
and adds an example for demonstration.
---------
Co-authored-by: Ben Yang <ben@ya.ng>
# Description
Trying to help @amtoine out here - the spans calculated by `ast::Call`
by `span()` and `argument_span()` are suspicious and are not properly
guarding against `end` that might be before `start`. Just using
`Span::merge()` / `merge_many()` instead to try to make the behaviour as
simple and consistent as possible. Hopefully then even if the arguments
have some crazy spans, we don't have spans that are just totally
invalid.
# Tests + Formatting
I did check that everything passes with this.
fixes https://github.com/nushell/nushell/issues/13378
# Description
This PR tries to improve usage of system APIs to determine the location
of vendored autoload files.
# User-Facing Changes
The paths listed in #13180 and #13217 are changing. This has not been
part of a release yet, so arguably the user facing changes are only to
unreleased features anyway.
# Tests + Formatting
Haven't done, but if someone wants to help me here, I'm open to doing
it. I just don't know how to properly test this.
# After Submitting
# Description
Close: #12083Close: #12084
# User-Facing Changes
It's a breaking change because we have switched the position of
`<initial>` and `<closure>`, after the change, initial value will be
optional. So it's possible to do something like this:
```nushell
> let f = {|fib = [0, 1]| {out: $fib.0, next: [$fib.1, ($fib.0 + $fib.1)]} }
> generate $f | first 5
╭───┬───╮
│ 0 │ 0 │
│ 1 │ 1 │
│ 2 │ 1 │
│ 3 │ 2 │
│ 4 │ 3 │
╰───┴───╯
```
It will also raise error if user don't give initial value, and the
closure don't have default parameter.
```nushell
❯ let f = {|fib| {out: $fib.0, next: [$fib.1, ($fib.0 + $fib.1)]} }
❯ generate $f
Error: × The initial value is missing
╭─[entry #5:1:1]
1 │ generate $f
· ────┬───
· ╰── Missing intial value
╰────
help: Provide <initial> value in generate, or assigning default value to closure parameter
```
# Tests + Formatting
Added some test cases.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Adds functionality to the plugin interface to support calling internal
commands from plugins. For example, using `view ir --json`:
```rust
let closure: Value = call.req(0)?;
let Some(decl_id) = engine.find_decl("view ir")? else {
return Err(LabeledError::new("`view ir` not found"));
};
let ir_json = engine.call_decl(
decl_id,
EvaluatedCall::new(call.head)
.with_named("json".into_spanned(call.head), Value::bool(true, call.head))
.with_positional(closure),
PipelineData::Empty,
true,
false,
)?.into_value()?.into_string()?;
let ir = serde_json::from_value(&ir_json);
// ...
```
# User-Facing Changes
Plugin developers can now use `EngineInterface::find_decl()` and
`call_decl()` to call internal commands, which could be handy for
formatters like `to csv` or `to nuon`, or for reflection commands that
help gain insight into the engine.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] release notes
- [ ] update plugin protocol documentation: `FindDecl`, `CallDecl`
engine calls; `Identifier` engine call response
# Description
Following from #13377, this PR refactors the related `window` command.
In the case where `window` should behave exactly like `chunks`, it now
reuses the same code that `chunks` does. Otherwise, the other cases have
been rewritten and have resulted in a performance increase:
| window size | stride | old time (ms) | new time (ms) |
| -----------:| ------:| -------------:| -------------:|
| 20 | 1 | 757 | 722 |
| 2 | 1 | 364 | 333 |
| 1 | 1 | 343 | 293 |
| 20 | 20 | 90 | 63 |
| 2 | 2 | 215 | 175 |
| 20 | 30 | 74 | 60 |
| 2 | 4 | 141 | 110 |
# User-Facing Changes
`window` will now error if the window size or stride is 0, which is
technically a breaking change.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes some minor config inconsistencies:
- Add default value for `shape_glob_interpolation` to light theme, as it
is missing
- Add right padding space to `shape_garbage` options
- Use a integer value for `footer_mode` instead of a string
- Set `buffer_editor` to null instead of empty string
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
N/A
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
# Description
This grew quite a bit beyond its original scope, but I've tried to make
`$in` a bit more consistent and easier to work with.
Instead of the parser generating calls to `collect` and creating
closures, this adds `Expr::Collect` which just evaluates in the same
scope and doesn't require any closure.
When `$in` is detected in an expression, it is replaced with a new
variable (also called `$in`) and wrapped in `Expr::Collect`. During
eval, this expression is evaluated directly, with the input and with
that new variable set to the collected value.
Other than being faster and less prone to gotchas, it also makes it
possible to typecheck the output of an expression containing `$in`,
which is nice. This is a breaking change though, because of the lack of
the closure and because now typechecking will actually happen. Also, I
haven't attempted to typecheck the input yet.
The IR generated now just looks like this:
```gas
collect %in
clone %tmp, %in
store-variable $in, %tmp
# %out <- ...expression... <- %in
drop-variable $in
```
(where `$in` is the local variable created for this collection, and not
`IN_VARIABLE_ID`)
which is a lot better than having to create a closure and call `collect
--keep-env`, dealing with all of the capture gathering and allocation
that entails. Ideally we can also detect whether that input is actually
needed, so maybe we don't have to clone, but I haven't tried to do that
yet. Theoretically now that the variable is a unique one every time, it
should be possible to give it a type - I just don't know how to
determine that yet.
On top of that, I've also reworked how `$in` works in pipeline-initial
position. Previously, it was a little bit inconsistent. For example,
this worked:
```nushell
> 3 | do { let x = $in; let y = $in; print $x $y }
3
3
```
However, this causes a runtime variable not found error on the second
`$in`:
```nushell
> def foo [] { let x = $in; let y = $in; print $x $y }; 3 | foo
Error: nu:🐚:variable_not_found
× Variable not found
╭─[entry #115:1:35]
1 │ def foo [] { let x = $in; let y = $in; print $x $y }; 3 | foo
· ─┬─
· ╰── variable not found
╰────
```
I've fixed this by making the first element `$in` detection *always*
happen at the block level, so if you use `$in` in pipeline-initial
position anywhere in a block, it will collect with an implicit
subexpression around the whole thing, and you can then use that `$in`
more than once. In doing this I also rewrote `parse_pipeline()` and
hopefully it's a bit more straightforward and possibly more efficient
too now.
Finally, I've tried to make `let` and `mut` a lot more straightforward
with how they handle the rest of the pipeline, and using a redirection
with `let`/`mut` now does what you'd expect if you assume that they
consume the whole pipeline - the redirection is just processed as
normal. These both work now:
```nushell
let x = ^foo err> err.txt
let y = ^foo out+err>| str length
```
It was previously possible to accomplish this with a subexpression, but
it just seemed like a weird gotcha that you couldn't do it. Intuitively,
`let` and `mut` just seem to take the whole line.
- closes#13137
# User-Facing Changes
- `$in` will behave more consistently with blocks and closures, since
the entire block is now just wrapped to handle it if it appears in the
first pipeline element
- `$in` no longer creates a closure, so what can be done within an
expression containing `$in` is less restrictive
- `$in` containing expressions are now type checked, rather than just
resulting in `any`. However, `$in` itself is still `any`, so this isn't
quite perfect yet
- Redirections are now allowed in `let` and `mut` and behave pretty much
how you'd expect
# Tests + Formatting
Added tests to cover the new behaviour.
# After Submitting
- [ ] release notes (definitely breaking change)
Bumps [uuid](https://github.com/uuid-rs/uuid) from 1.9.1 to 1.10.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/uuid-rs/uuid/releases">uuid's
releases</a>.</em></p>
<blockquote>
<h2>1.10.0</h2>
<h2>Deprecations</h2>
<p>This release deprecates and renames the following functions:</p>
<ul>
<li><code>Builder::from_rfc4122_timestamp</code> ->
<code>Builder::from_gregorian_timestamp</code></li>
<li><code>Builder::from_sorted_rfc4122_timestamp</code> ->
<code>Builder::from_sorted_gregorian_timestamp</code></li>
<li><code>Timestamp::from_rfc4122</code> ->
<code>Timestamp::from_gregorian</code></li>
<li><code>Timestamp::to_rfc4122</code> ->
<code>Timestamp::to_gregorian</code></li>
</ul>
<h2>What's Changed</h2>
<ul>
<li>Use const identifier in uuid macro by <a
href="https://github.com/Vrajs16"><code>@Vrajs16</code></a> in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/764">uuid-rs/uuid#764</a></li>
<li>Rename most methods referring to RFC4122 by <a
href="https://github.com/Mikopet"><code>@Mikopet</code></a> / <a
href="https://github.com/KodrAus"><code>@KodrAus</code></a> in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/765">uuid-rs/uuid#765</a></li>
<li>prepare for 1.10.0 release by <a
href="https://github.com/KodrAus"><code>@KodrAus</code></a> in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/766">uuid-rs/uuid#766</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/Vrajs16"><code>@Vrajs16</code></a> made
their first contribution in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/764">uuid-rs/uuid#764</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/uuid-rs/uuid/compare/1.9.1...1.10.0">https://github.com/uuid-rs/uuid/compare/1.9.1...1.10.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="4b4c590ae3"><code>4b4c590</code></a>
Merge pull request <a
href="https://redirect.github.com/uuid-rs/uuid/issues/766">#766</a> from
uuid-rs/cargo/1.10.0</li>
<li><a
href="68eff32640"><code>68eff32</code></a>
Merge pull request <a
href="https://redirect.github.com/uuid-rs/uuid/issues/765">#765</a> from
uuid-rs/chore/time-fn-deprecations</li>
<li><a
href="3d5384da4b"><code>3d5384d</code></a>
update docs and deprecation messages for timestamp fns</li>
<li><a
href="de50f2091f"><code>de50f20</code></a>
renaming rfc4122 functions</li>
<li><a
href="4a8841792a"><code>4a88417</code></a>
prepare for 1.10.0 release</li>
<li><a
href="66b4fcef14"><code>66b4fce</code></a>
Merge pull request <a
href="https://redirect.github.com/uuid-rs/uuid/issues/764">#764</a> from
Vrajs16/main</li>
<li><a
href="8896e26c42"><code>8896e26</code></a>
Use expr instead of ident</li>
<li><a
href="09973d6aff"><code>09973d6</code></a>
Added changes</li>
<li><a
href="6edf3e8cd5"><code>6edf3e8</code></a>
Use const identifer in uuid macro</li>
<li>See full diff in <a
href="https://github.com/uuid-rs/uuid/compare/1.9.1...1.10.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Replaces the `dirs_next` family of crates with `dirs`. `dirs_next` was
born when the `dirs` crates were abandoned three years ago, but they're
being maintained again and most projects depend on `dirs` nowadays.
`dirs_next` has been abandoned since.
This came up while working on
https://github.com/nushell/nushell/pull/13382.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests and formatter have been run.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Before this change `default` would dive into lists and replace `null`
elements with the default value.
Therefore there was no easy way to process `null|list<null|string>`
input and receive `list<null|string>`
(IOW to apply the default on the top level only).
However it's trivially easy to apply default values to list elements
with the `each` command:
```nushell
[null, "a", null] | each { default "b" }
```
So there's no need to have this behavior in `default` command.
# User-Facing Changes
* `default` no longer dives into lists to replace `null` elements with
the default value.
# Tests + Formatting
Added a couple of tests for the new (and old) behavior.
# After Submitting
* Update docs.
# Description
The name of the `group` command is a little unclear/ambiguous.
Everything I look at it, I think of `group-by`. I think `chunks` more
clearly conveys what the `group` command does. Namely, it divides the
input list into chunks of a certain size. For example,
[`slice::chunks`](https://doc.rust-lang.org/std/primitive.slice.html#method.chunks)
has the same name. So, this PR adds a new `chunks` command to replace
the now deprecated `group` command.
The `chunks` command is a refactored version of `group`. As such, there
is a small performance improvement:
```nushell
# $data is a very large list
> bench { $data | chunks 2 } --rounds 30 | get mean
474ms 921µs 190ns
# deprecation warning was disabled here for fairness
> bench { $data | group 2 } --rounds 30 | get mean
592ms 702µs 440ns
> bench { $data | chunks 200 } --rounds 30 | get mean
374ms 188µs 318ns
> bench { $data | group 200 } --rounds 30 | get mean
481ms 264µs 869ns
> bench { $data | chunks 1 } --rounds 30 | get mean
642ms 574µs 42ns
> bench { $data | group 1 } --rounds 30 | get mean
981ms 602µs 513ns
```
# User-Facing Changes
- `group` command has been deprecated in favor of new `chunks` command.
- `chunks` errors when given a chunk size of `0` whereas `group` returns
chunks with one element.
# Tests + Formatting
Added tests for `chunks`, since `group` did not have any tests.
# After Submitting
Update book if necessary.
# Description
This is a minor breaking change to JSON output syntax/style of the `to
json` command.
This fixes#13326 by setting `braces_same_line` to true when creating a
new `HjsonFormatter`.
This then simply tells `HjsonFormatter` to keep the braces on the same
line when outputting which is what I expected nu's `to json` command to
do.
There are almost no changes to nushell itself, all changes are contained
within `nu-json` crate (minus any documentation updates).
Oh, almost forgot to mention, to get the tests compiling, I added
fancy_regex as a _dev_ dependency to nu-json. I could look into
eliminating that if desirable.
# User-Facing Changes
**Breaking Change**
nushell now outputs the desired result using the reproduction command
from the issue:
```
echo '{"version": "v0.4.4","notes": "blablabla","pub_date": "2024-05-04T16:05:00Z","platforms":{"windows-x86_64":{"signature": "blablabla","url": "https://blablabla"}}}' | from json | to json
```
outputs:
```
{
"version": "v0.4.4",
"notes": "blablabla",
"pub_date": "2024-05-04T16:05:00Z",
"platforms": {
"windows-x86_64": {
"signature": "blablabla",
"url": "https://blablabla"
}
}
}
```
whereas previously it would push the opening braces onto a new line:
```
{
"version": "v0.4.4",
"notes": "blablabla",
"pub_date": "2024-05-04T16:05:00Z",
"platforms":
{
"windows-x86_64":
{
"signature": "blablabla",
"url": "https://blablabla"
}
}
}
```
# Tests + Formatting
toolkit check pr mostly passes - there are regrettably some tests not
passing on my windows machine _before making any changes_ (I may look
into this as a separate issue)
I have re-enabled the [hjson
tests](https://github.com/nushell/nushell/blob/main/crates/nu-json/tests/main.rs).
This is done in the second commit 🙂
They have a crucial difference to what they were previously asserting:
* nu-json outputs in json syntax, not hjson syntax
I think this is desirable, but I'm not aware of the history of these
tests.
# After Submitting
I suspect there `to json` command examples will need updating to match,
haven't checked yet!
# Description
Report parse warnings and compile errors when running script files.
It's useful to report this information to script authors and users so
they can know if they need to update something in the near future.
I also found that moving some errors from eval to compile time meant
some error tests can fail (in `tests/repl`) so this is a good idea to
keep those passing.
# User-Facing Changes
- Report parse warnings when running script files
- Report compile errors when running script files
# Description
Add `README.md` files to each crate in our workspace (-plugins) and also
include it in the `lib.rs` documentation for <docs.rs> (if there is no
existing `lib.rs` crate documentation)
In all new README I added the defensive comment that the crates are not
considered stable for public consumption. If necessary we can adjust
this if we deem a crate useful for plugin authors.
# Description
Fixes#13359
In an attempt to generate names for flat columns resulting from a nested
accesses #3016 generated new column names on nested selection, out of
convenience, that composed the cell path as a string (including `.`) and
then simply replaced all `.` with `_`. As we permit `.` in column names
as long as you quote this surprisingly alters `select`ed columns.
# User-Facing Changes
New columns generated by selection with nested cell paths will for now
be named with a string containing the keys separated by `.` instead of
`_`. We may want to reconsider the semantics for nested access.
# Tests + Formatting
- Alter test to breaking change on nested `select`
# Description
Touch was added to the shell command context twice, once with the other
filesystem commands and once with the format commands. I removed that
second occurrence of touch, because I'm assuming it was only added there
because "Touch" starts with "To."
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None
# Description
This adds tracing for each individual instruction to the `Debugger`
trait. Register contents can be inspected both when entering and leaving
an instruction, and if an instruction produced an error, a reference to
the error is also available. It's not the full `EvalContext` but it's
most of the important parts for getting an idea of what's going on.
Added support for all of this to the `Profiler` / `debug profile` as
well, and the output is quite incredible - super verbose, but you can
see every instruction that's executed and also what the result was if
it's an instruction that has a clearly defined output (many do).
# User-Facing Changes
- Added `--instructions` to `debug profile`, which adds the `pc` and
`instruction` columns to the output.
- `--expr` only works in AST mode, and `--instructions` only works in IR
mode. In the wrong mode, the output for those columns is just blank.
# Tests + Formatting
All passing.
# After Submitting
- [ ] release notes
# Description
This PR just tweaks the `parse` command's usage and examples to make it
clearer what's going on "under the hood".
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This improves the error when the determined output of a custom command
doesn't match the specified output type by adding the actual determined
output type.
# User-Facing Changes
Previous: `command doesn't output {0}`
New: `expected {0}, but command outputs {1}`
# Tests + Formatting
Passing.
# After Submitting
- [ ] release notes? (minor change, but helpful)
# Description
Just a quick one, but `List(Any)` has to come before `Table`, because
`List(Any)` is a valid match for `Table`, so it will choose `Table`
output even if the input was actually `List(Any)`. I ended up removing
`Table` because it's just not needed at all anyway.
Though, I'm not really totally sure this is correct - I think the parser
should probably actually just have some idea of what the more specific
type is, and choose the most specific type match, rather than just doing
it in order. I guess this will result in the output just always being
`List(Any)` for now. Still better than a bad typecheck error
# User-Facing Changes
Fixes the following contrived example:
```nushell
def foo []: nothing -> list<int> {
seq 1 10 | # list<int>
each { |n| $n * 20 } | # this causes the type to become list<any>
take until { |x| $x < 10 } } # table is first, so now this is type table
# ...but table is not compatible with list<int>
}
```
# After Submitting
- [ ] make typechecker type choice more robust
- [ ] release notes
Somehow this logic was missed on my end. ( I mean I was not even
thinking about it in original patch 😄 )
Please recheck
Added a regression test too.
close#13336
cc: @fdncred
# Description
Follow up fix to #13332, so that changes to config when running under IR
actually happen as well. Since I merged them around the same time, I
forgot about this.
# Description
Allows `Stack` to have a modified local `Config`, which is updated
immediately when `$env.config` is assigned to. This means that even
within a script, commands that come after `$env.config` changes will
always see those changes in `Stack::get_config()`.
Also fixed a lot of cases where `engine_state.get_config()` was used
even when `Stack` was available.
Closes#13324.
# User-Facing Changes
- Config changes apply immediately after the assignment is executed,
rather than whenever config is read by a command that needs it.
- Potentially slower performance when executing a lot of lines that
change `$env.config` one after another. Recommended to get `$env.config`
into a `mut` variable first and do modifications, then assign it back.
- Much faster performance when executing a script that made
modifications to `$env.config`, as the changes are only parsed once.
# Tests + Formatting
All passing.
# After Submitting
- [ ] release notes
# Description
Add a few more options to `view ir` for finding blocks, which I found
myself wanting while trying to trace through the generated code.
If we end up adding support for plugins to call commands that are in
scope by name, this will also make it possible for
`nu_plugin_explore_ir` to just step through IR automatically (by passing
the block/decl ids) without exposing too many internals. With that I
could potentially add keys that allow you to step in to closures or
decls with the press of a button, just by calling `view ir --json`
appropriately.
# User-Facing Changes
- `view ir` can now take names of custom commands that are in scope.
- integer arguments are treated as block IDs, which sometimes show up in
IR (closure, block, row condition literals).
- `--decl-id` provided to treat the argument as a decl ID instead, which
is also sometimes necessary to access something that isn't in scope.
# Description
Fix `view ir` to use `Signature::build()` rather than `new()`, which is
required for `--help` to work. Also add `Category::Debug`, as that's
most appropriate.
# Description
`Signature::get_positional()` was returning an owned `PositionalArg`,
which contains a bunch of strings. `ClosureEval` uses this in
`try_add_arg`, making all of that unnecessary cloning a little bit hot.
# User-Facing Changes
Slightly better performance
# Description
Just more efficient allocation during `Stack::gather_captures()` so that
we don't have to grow the `Vec` needlessly.
# User-Facing Changes
Slightly better performance.
# Description
Was having an issue compiling main after the IR pr. Talked to devyn and
he led me to change a couple things real quick and we're compiling once
again.
# Description
This is another easy performance lift that just changes `env_vars` and
`env_hidden` on `Stack` to use `Arc`. I noticed that these were being
cloned on essentially every closure invocation during captures
gathering, so we're paying the cost for all of that even when we don't
change anything. On top of that, for `env_vars`, there's actually an
entirely fresh `HashMap` created for each child scope, so it's highly
unlikely that we'll modify the parent ones.
Uses `Arc::make_mut` instead to take care of things when we need to
mutate something, and most of the time nothing has to be cloned at all.
# Benchmarks
The benefits are greater the more calls there are to env-cloning
functions like `captures_to_stack()`. Calling custom commands in a loop
is basically best case for a performance improvement. Plain `each` with
a literal block isn't so badly affected because the stack is set up
once.
## random_bytes.nu
```nushell
use std bench
do {
const SCRIPT = ../nu_scripts/benchmarks/random-bytes.nu
let before_change = bench { nu $SCRIPT }
let after_change = bench { target/release/nu $SCRIPT }
{
before: ($before_change | reject times),
after: ($after_change | reject times)
}
}
```
```
╭────────┬──────────────────────────────╮
│ │ ╭──────┬───────────────────╮ │
│ before │ │ mean │ 603ms 759µs 727ns │ │
│ │ │ min │ 593ms 298µs 167ns │ │
│ │ │ max │ 648ms 612µs 291ns │ │
│ │ │ std │ 9ms 335µs 251ns │ │
│ │ ╰──────┴───────────────────╯ │
│ │ ╭──────┬───────────────────╮ │
│ after │ │ mean │ 518ms 400µs 557ns │ │
│ │ │ min │ 507ms 762µs 583ns │ │
│ │ │ max │ 566ms 695µs 166ns │ │
│ │ │ std │ 9ms 554µs 767ns │ │
│ │ ╰──────┴───────────────────╯ │
╰────────┴──────────────────────────────╯
```
## gradient_benchmark_no_check.nu
```nushell
use std bench
do {
const SCRIPT = ../nu_scripts/benchmarks/gradient_benchmark_no_check.nu
let before_change = bench { nu $SCRIPT }
let after_change = bench { target/release/nu $SCRIPT }
{
before: ($before_change | reject times),
after: ($after_change | reject times)
}
}
```
```
╭────────┬──────────────────────────────╮
│ │ ╭──────┬───────────────────╮ │
│ before │ │ mean │ 146ms 543µs 380ns │ │
│ │ │ min │ 142ms 416µs 166ns │ │
│ │ │ max │ 189ms 595µs │ │
│ │ │ std │ 7ms 140µs 342ns │ │
│ │ ╰──────┴───────────────────╯ │
│ │ ╭──────┬───────────────────╮ │
│ after │ │ mean │ 134ms 211µs 678ns │ │
│ │ │ min │ 132ms 433µs 125ns │ │
│ │ │ max │ 135ms 722µs 583ns │ │
│ │ │ std │ 793µs 134ns │ │
│ │ ╰──────┴───────────────────╯ │
╰────────┴──────────────────────────────╯
```
# User-Facing Changes
Better performance, particularly for custom commands, especially if
there are a lot of environment variables. Nothing else.
# Tests + Formatting
All passing.
# Description
This PR adds an internal representation language to Nushell, offering an
alternative evaluator based on simple instructions, stream-containing
registers, and indexed control flow. The number of registers required is
determined statically at compile-time, and the fixed size required is
allocated upon entering the block.
Each instruction is associated with a span, which makes going backwards
from IR instructions to source code very easy.
Motivations for IR:
1. **Performance.** By simplifying the evaluation path and making it
more cache-friendly and branch predictor-friendly, code that does a lot
of computation in Nushell itself can be sped up a decent bit. Because
the IR is fairly easy to reason about, we can also implement
optimization passes in the future to eliminate and simplify code.
2. **Correctness.** The instructions mostly have very simple and
easily-specified behavior, so hopefully engine changes are a little bit
easier to reason about, and they can be specified in a more formal way
at some point. I have made an effort to document each of the
instructions in the docs for the enum itself in a reasonably specific
way. Some of the errors that would have happened during evaluation
before are now moved to the compilation step instead, because they don't
make sense to check during evaluation.
3. **As an intermediate target.** This is a good step for us to bring
the [`new-nu-parser`](https://github.com/nushell/new-nu-parser) in at
some point, as code generated from new AST can be directly compared to
code generated from old AST. If the IR code is functionally equivalent,
it will behave the exact same way.
4. **Debugging.** With a little bit more work, we can probably give
control over advancing the virtual machine that `IrBlock`s run on to
some sort of external driver, making things like breakpoints and single
stepping possible. Tools like `view ir` and [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir) make it easier than
before to see what exactly is going on with your Nushell code.
The goal is to eventually replace the AST evaluator entirely, once we're
sure it's working just as well. You can help dogfood this by running
Nushell with `$env.NU_USE_IR` set to some value. The environment
variable is checked when Nushell starts, so config runs with IR, or it
can also be set on a line at the REPL to change it dynamically. It is
also checked when running `do` in case within a script you want to just
run a specific piece of code with or without IR.
# Example
```nushell
view ir { |data|
mut sum = 0
for n in $data {
$sum += $n
}
$sum
}
```
```gas
# 3 registers, 19 instructions, 0 bytes of data
0: load-literal %0, int(0)
1: store-variable var 904, %0 # let
2: drain %0
3: drop %0
4: load-variable %1, var 903
5: iterate %0, %1, end 15 # for, label(1), from(14:)
6: store-variable var 905, %0
7: load-variable %0, var 904
8: load-variable %2, var 905
9: binary-op %0, Math(Plus), %2
10: span %0
11: store-variable var 904, %0
12: load-literal %0, nothing
13: drain %0
14: jump 5
15: drop %0 # label(0), from(5:)
16: drain %0
17: load-variable %0, var 904
18: return %0
```
# Benchmarks
All benchmarks run on a base model Mac Mini M1.
## Iterative Fibonacci sequence
This is about as best case as possible, making use of the much faster
control flow. Most code will not experience a speed improvement nearly
this large.
```nushell
def fib [n: int] {
mut a = 0
mut b = 1
for _ in 2..=$n {
let c = $a + $b
$a = $b
$b = $c
}
$b
}
use std bench
bench { 0..50 | each { |n| fib $n } }
```
IR disabled:
```
╭───────┬─────────────────╮
│ mean │ 1ms 924µs 665ns │
│ min │ 1ms 700µs 83ns │
│ max │ 3ms 450µs 125ns │
│ std │ 395µs 759ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
IR enabled:
```
╭───────┬─────────────────╮
│ mean │ 452µs 820ns │
│ min │ 427µs 417ns │
│ max │ 540µs 167ns │
│ std │ 17µs 158ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
##
[gradient_benchmark_no_check.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/gradient_benchmark_no_check.nu)
IR disabled:
```
╭───┬──────────────────╮
│ 0 │ 27ms 929µs 958ns │
│ 1 │ 21ms 153µs 459ns │
│ 2 │ 18ms 639µs 666ns │
│ 3 │ 19ms 554µs 583ns │
│ 4 │ 13ms 383µs 375ns │
│ 5 │ 11ms 328µs 208ns │
│ 6 │ 5ms 659µs 542ns │
╰───┴──────────────────╯
```
IR enabled:
```
╭───┬──────────────────╮
│ 0 │ 22ms 662µs │
│ 1 │ 17ms 221µs 792ns │
│ 2 │ 14ms 786µs 708ns │
│ 3 │ 13ms 876µs 834ns │
│ 4 │ 13ms 52µs 875ns │
│ 5 │ 11ms 269µs 666ns │
│ 6 │ 6ms 942µs 500ns │
╰───┴──────────────────╯
```
##
[random-bytes.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/random-bytes.nu)
I got pretty random results out of this benchmark so I decided not to
include it. Not clear why.
# User-Facing Changes
- IR compilation errors may appear even if the user isn't evaluating
with IR.
- IR evaluation can be enabled by setting the `NU_USE_IR` environment
variable to any value.
- New command `view ir` pretty-prints the IR for a block, and `view ir
--json` can be piped into an external tool like [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir).
# Tests + Formatting
All tests are passing with `NU_USE_IR=1`, and I've added some more eval
tests to compare the results for some very core operations. I will
probably want to add some more so we don't have to always check
`NU_USE_IR=1 toolkit test --workspace` on a regular basis.
# After Submitting
- [ ] release notes
- [ ] further documentation of instructions?
- [ ] post-release: publish `nu_plugin_explore_ir`
# Description
Fixes the lexer to recognize `out>|`, `err>|`, `out+err>|`, etc.
Previously only the short-style forms were recognized, which was
inconsistent with normal file redirections.
I also integrated it all more into the normal lex path by checking `|`
in a special way, which should be more performant and consistent, and
cleans up the code a bunch.
Closes#13331.
# User-Facing Changes
- Adds `out>|` (error), `err>|`, `out+err>|`, `err+out>|` as recognized
forms of the pipe redirection.
# Tests + Formatting
All passing. Added tests for the new forms.
# After Submitting
- [ ] release notes
# Description
Makes `polars unpivot` use the same arguments as `polars pivot` and
makes it consistent with the polars' rust api. Additionally, support for
the polar's streaming engine has been exposed on eager dataframes.
Previously, it would only work with lazy dataframes.
# User-Facing Changes
* `polars unpivot` argument `--columns`|`-c` has been renamed to
`--index`|`-i`
* `polars unpivot` argument `--values`|`-v` has been renamed to
`--on`|`-o`
* `polars unpivot` short argument for `--streamable` is now `-t` to make
it consistent with `polars pivot`. It was made `-t` for `polars pivot`
because `-s` is short for `--short`
GOOD CATCH.............................................................
SORRY
I've added a test to catch regression just in case.
close#13319
cc: @fdncred
# Description
From the feedbacks from @amtoine , it's good to make nushell shows error
for `o>|` syntax.
# User-Facing Changes
## Before
```nushell
'foo' o>| print 07/09/2024 06:44:23 AM
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #6:1:9]
1 │ 'foo' o>| print
· ┬
· ╰── expected redirection target
```
## After
```nushell
'foo' o>| print 07/09/2024 06:47:26 AM
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #1:1:7]
1 │ 'foo' o>| print
· ─┬─
· ╰── expected `|`. Redirection stdout to pipe is the same as piping directly.
╰────
```
# Tests + Formatting
Added one test
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR introduces a new `Signals` struct to replace our adhoc passing
around of `ctrlc: Option<Arc<AtomicBool>>`. Doing so has a few benefits:
- We can better enforce when/where resetting or triggering an interrupt
is allowed.
- Consolidates `nu_utils::ctrl_c::was_pressed` and other ad-hoc
re-implementations into a single place: `Signals::check`.
- This allows us to add other types of signals later if we want. E.g.,
exiting or suspension.
- Similarly, we can more easily change the underlying implementation if
we need to in the future.
- Places that used to have a `ctrlc` of `None` now use
`Signals::empty()`, so we can double check these usages for correctness
in the future.
cc: @zhiburt
This is an internal refactoring for `explore`.
Previously, views inside `explore` were created with default/incorrect
configuration and then the correct configuration was passed to them
using a function called `setup()`. I believe this was because
configuration was dynamic and could change while `explore` was running.
After https://github.com/nushell/nushell/pull/10259, configuration can
no longer be changed on the fly. So we can clean this up by removing
`setup()` and passing configuration to views when they are created.
# Description
Fix `into bits` to have consistent behavior when passed a byte stream.
# User-Facing Changes
Previously, it was returning a binary on stream, even though its
input/output types don't describe this possibility. We don't need this
since we have `into binary` anyway.
# Tests + Formatting
Tests added
# Description
fixed#12699
When bare dates or naive times are specified in toml files, `from toml`
returns invalid dates or times.
This PR fixes the problem to correctly handle toml datetime.
The current version command returns the default datetime
(`chrono::DateTime::default()`) if the datetime parse fails. However, I
felt that this behavior was a bit unfriendly, so I changed it to return
`Value::string`.
# User-Facing Changes
The command returns a date with default time and timezone if a bare date
is specified.
```
~/Development/nushell> "dob = 2023-05-27" | from toml
╭─────┬────────────╮
│ dob │ a year ago │
╰─────┴────────────╯
~/Development/nushell> "dob = 2023-05-27" | from toml |
Sat, 27 May 2023 00:00:00 +0000 (a year ago)
~/Development/nushell>
```
If a bare time is given, a time string is returned.
```
~/Development/nushell> "tm = 11:00:00" | from toml
╭────┬──────────╮
│ tm │ 11:00:00 │
╰────┴──────────╯
~/Development/nushell> "tm = 11:00:00" | from toml | get tm
11:00:00
~/Development/nushell>
```
# Tests + Formatting
When I ran tests, `commands::touch::change_file_mtime_to_reference`
failed with the following error.
The error also occurs in the master branch, so it's probably unrelated
to these changes.
(maybe a problem with my dev environment)
```
$ ~/Development/nushell> toolkit check pr
~~~~~~~~
test usage_start_uppercase ... ok
test format_conversions::yaml::convert_dict_to_yaml_with_integer_floats_key ... ok
test format_conversions::yaml::convert_dict_to_yaml_with_boolean_key ... ok
test format_conversions::yaml::table_to_yaml_text_and_from_yaml_text_back_into_table ... ok
test quickcheck_parse ... ok
test format_conversions::yaml::convert_dict_to_yaml_with_integer_key ... ok
failures:
---- commands::touch::change_file_mtime_to_reference stdout ----
=== stderr
thread 'commands::touch::change_file_mtime_to_reference' panicked at crates/nu-command/tests/commands/touch.rs:298:9:
assertion `left == right` failed
left: SystemTime { tv_sec: 1720344745, tv_nsec: 862392750 }
right: SystemTime { tv_sec: 1720344745, tv_nsec: 887670417 }
failures:
commands::touch::change_file_mtime_to_reference
test result: FAILED. 1542 passed; 1 failed; 32 ignored; 0 measured; 0 filtered out; finished in 12.04s
error: test failed, to rerun pass `-p nu-command --test main`
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🔴 `toolkit test`
- ⚫ `toolkit test stdlib`
~/Development/nushell> toolkit test stdlib
Compiling nu v0.95.1 (/Users/hiroki/Development/nushell)
Compiling nu-cmd-lang v0.95.1 (/Users/hiroki/Development/nushell/crates/nu-cmd-lang)
Finished dev [unoptimized + debuginfo] target(s) in 6.64s
Running `target/debug/nu --no-config-file -c '
use crates/nu-std/testing.nu
testing run-tests --path crates/nu-std
'`
2024-07-07T19:00:20.423|INF|Running from_jsonl_invalid_object in module test_formats
2024-07-07T19:00:20.436|INF|Running env_log-prefix in module test_logger_env
~~~~~~~~~~~
2024-07-07T19:00:22.196|INF|Running debug_short in module test_basic_commands
~/Development/nushell>
```
# After Submitting
nothing
# Description
Refactors `help operators` so that its output is always up to date with
the parser.
# User-Facing Changes
- The order of output rows for `help operators` was changed.
- `not` is now listed as a boolean operator instead of a comparison
operator.
- Edited some of the descriptions for the operators.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
My last PR (https://github.com/nushell/nushell/pull/13242) made it so
that the last branch in the variable completer doesn't sort suggestions.
Sorry about that. This should fix it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Variables will now be sorted properly.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added one test case to verify this won't happen again.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Bug fix: `PipelineData::check_external_failed()` was not preserving the
original `type_` and `known_size` attributes of the stream passed in for
streams that come from children, so `external-command | into binary` did
not work properly and always ended up still being unknown type.
# User-Facing Changes
The following test case now works as expected:
```nushell
> head -c 2 /dev/urandom | into binary
# Expected: pretty hex dump of binary
# Previous behavior: just raw binary in the terminal
```
# Tests + Formatting
Added a test to cover this to `into binary`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Related to #13298
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Exotic types like `Duration` and `Filesize` return a float on division
by the same type, i.e., the unit is gone since division results in a
scalar. When using the modulo operator, the output type has the same
unit.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Division results in a float like the following:
```sh
~/Public/nushell> 512sec / 3sec
170.66666666666666
```
Modulo results in an output with the same unit:
```sh
~/Public/nushell> 512sec mod 3sec
2sec
```
Type checking isn't confused with output types:
```sh
~/Public/nushell> (512sec mod 3sec) / 0.5sec
4
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Existing tests are passing.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR fixes an issue with `explore` where you can "drill down" into
the same value forever. For example:
1. Run `ls | explore`
2. Press Enter to enter cursor mode
3. Press Enter again to open the selected string in a new layer
4. Press Enter again to open that string in a new layer
5. Press Enter again to open that string in a new layer
6. Repeat and eventually you have a bajillion layers open with the same
string
IMO it only makes sense to "drill down" into lists and records.
In a separate commit I also did a little refactoring, cleaning up naming
and comments.
# Description
Fixes: #13189
The issue is caused `error make` returns a `Value::Errror`, and when
nushell pass it to `table -e` in `std help`, it directly stop and render
the error message.
To solve it, I think it's safe to make these examples return None
directly, it doesn't change the reult of `help error make`.
# User-Facing Changes
## Before
```nushell
~> help "error make"
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[NU_STDLIB_VIRTUAL_DIR/std/help.nu:692:21]
691 │ ] {
692 │ let commands = (scope commands | sort-by name)
· ───────┬──────
· ╰── source value
693 │
╰────
Error: × my custom error message
```
## After
```nushell
Create an error.
Search terms: panic, crash, throw
Category: core
This command:
- does not create a scope.
- is a built-in command.
- is a subcommand.
- is not part of a plugin.
- is not a custom command.
- is not a keyword.
Usage:
> error make {flags} <error_struct>
Flags:
-u, --unspanned - remove the origin label from the error
-h, --help - Display the help message for this command
Signatures:
<nothing> | error make[ <record>] -> <any>
Parameters:
error_struct: <record> The error to create.
Examples:
Create a simple custom error
> error make {msg: "my custom error message"}
Create a more complex custom error
> error make {
msg: "my custom error message"
label: {
text: "my custom label text" # not mandatory unless $.label exists
# optional
span: {
# if $.label.span exists, both start and end must be present
start: 123
end: 456
}
}
help: "A help string, suggesting a fix to the user" # optional
}
Create a custom error for a custom command that shows the span of the argument
> def foo [x] {
error make {
msg: "this is fishy"
label: {
text: "fish right here"
span: (metadata $x).span
}
}
}
```
# Tests + Formatting
Added 1 test
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
you can also mention related issues, PRs or discussions!
-->
This PR should close#13247
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
- The deprecated `itertools::unfold` function is replaced with
`std::iter::from_fn` for the generate command.
- The mutable iterator state is no longer passed as an argument to
`from_fn` but it gets captured with the closure's `move`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No user facing changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests for the generate command are passing locally.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
closes#13298 so that duration mod duration / duration = duration
### Before
```nushell
(92sec mod 1min) / 1sec
Error: nu::parser::unsupported_operation
× division is not supported between float and duration.
╭─[entry #5:1:1]
1 │ (92sec mod 1min) / 1sec
· ────────┬─────── ┬ ──┬─
· │ │ ╰── duration
· │ ╰── doesn't support these values
· ╰── float
╰────
```
### After
```nushell
❯ (92sec mod 1min) / 1sec
32
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#13280. After apply this patch, we can use non-timezone string +
format option `into datetime` cmd
# User-Facing Changes
AS-IS (before fixing)
```
$ "09.02.2024 11:06:11" | into datetime --format '%m.%d.%Y %T'
Error: nu:🐚:cant_convert
× Can't convert to could not parse as datetime using format '%m.%d.%Y %T'.
╭─[entry #1:1:25]
1 │ "09.02.2024 11:06:11" | into datetime --format '%m.%d.%Y %T'
· ──────┬──────
· ╰── can't convert input is not enough for unique date and time to could not parse as datetime using format '%m.%d.%Y %T'
╰────
help: you can use `into datetime` without a format string to enable flexible parsing
$ "09.02.2024 11:06:11" | into datetime
Mon, 2 Sep 2024 11:06:11 +0900 (in 2 months)
```
TO-BE(After fixing)
```
$ "09.02.2024 11:06:11" | into datetime --format '%m.%d.%Y %T'
Mon, 2 Sep 2024 20:06:11 +0900 (in 2 months)
$ "09.02.2024 11:06:11" | into datetime
Mon, 2 Sep 2024 11:06:11 +0900 (in 2 months)
```
# Tests + Formatting
If there is agreement on the direction, I will add a test.
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
This reverts commit 0cfd5fbece.
The original PR messed up syntax higlighting of aliases and causes
panics of completion in the presence of alias.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Complete the `--numbered` removal that was started with the deprecation
in #13112.
# User-Facing Changes
Breaking change - Use `| enumerate` in place of `--numbered` as shown in
the help example
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Searched online doc for `--numbered` to ensure no other usage needed to
be updated.
# Description
This PR just creates a better error message when the `save` command
fails.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes the problem pointed out in
https://github.com/nushell/nushell/issues/13204, where the Fish-like
completions aren't sorted properly (this PR doesn't close that issue
because the author there wants more than just fixed sort order).
The cause is all of the file/directory completions being fetched first
and then sorted all together while being treated as strings. Instead,
this PR sorts completions within each individual directory, avoiding
treating `/` as part of the path.
To do this, I removed the `sort` method from the completer trait (as
well as `get_sort_by`) and made all completers sort within the `fetch`
method itself. A generic `sort_completions` helper has been added to
sort lists of completions, and a more specific `sort_suggestions` helper
has been added to sort `Vec<Suggestion>`s.
As for the actual change that fixes the sort order for file/directory
completions, the `complete_rec` helper now sorts the children of each
directory before visiting their children. The file and directory
completers don't bother sorting at the end (except to move hidden files
down).
To reviewers: don't let the 29 changed files scare you, most of those
are just the test fixtures :)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This is the current behavior with prefix matching:
And with fuzzy matching:
Notice how `partial/hello.txt` is the last suggestion, even though it
should come before `partial-a`. This is because the ASCII code for `/`
is greater than that of `-`, so `partial-` is put before `partial/`.
This is this PR's behavior with prefix matching (`partial/hello.txt` is
at the start):
And with fuzzy matching:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- Modified the partial completions test fixture to test whether this PR
even fixed anything
- Modified fixture to test sort order of .nu completions (a previous
version of my changes didn't sort all the completions at the end but
there were no tests catching that)
- Added a test for making sure subcommand completions are sorted by
Levenshtein distance (a previous version of my changes sorted in
alphabetical order but there were no tests catching that)
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
There was a bug where anytime the plugin cache remove was called, the
plugin gc was turned back on. This probably happened when I added the
reference counter logic.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Part of https://github.com/nushell/nushell/issues/12963, step 2.
This PR refactors Call and related argument structures to remove their
dependency on `Expression::span` which will be removed in the future.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Should be none. If you see some error messages that look broken, please
report.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
With #13254, the content-type pipeline metadata field was added. This
pull request allows it to be manipulated with `metadata set`
# User-Facing Changes
* `metadata set` now has a `--content-type` flag
# Description
Provides the ability to use http commands as part of a pipeline.
Additionally, this pull requests extends the pipeline metadata to add a
content_type field. The content_type metadata field allows commands such
as `to json` to set the metadata in the pipeline allowing the http
commands to use it when making requests.
This pull request also introduces the ability to directly stream http
requests from streaming pipelines.
One other small change is that Content-Type will always be set if it is
passed in to the http commands, either indirectly or throw the content
type flag. Previously it was not preserved with requests that were not
of type json or form data.
# User-Facing Changes
* `http post`, `http put`, `http patch`, `http delete` can be used as
part of a pipeline
* `to text`, `to json`, `from json` all set the content_type metadata
field and the http commands will utilize them when making requests.
# Description
I introduced a regression in #13272 that resulted in `detect columns
--guess` to panic whenever it had to handle empty, whitespace-only, or
non-whitespace-only lines that go all the way to the last column (and as
such, cannot be considered to be lines that only have entries for the
first colum). I fix this by detecting these cases and skipping them,
since these are usually decoration lines. An example is the second line
output by `winget list`:
What we don't want to skip, however, is lines that contain no
whitespace, and fit into the detected first column, since these lines
represent cases where data is only available for the first column, and
are not just decoration lines. For example (made up example, there are
no such entries in `winget lits`'s output), in this output we would not
want to skip the `Docker Desktop` line :
```
Name Id Version Available Source
-------------------------------------------------------------------------------------------------------------------------------------
AMD Software ARPMachineX64AMD Catalyst Install Manager 24.4.1
AMD Ryzen Master ARPMachineX64AMD Ryzen Master 2.13.0.2908
Docker Desktop
Mozilla Firefox (x64 en-US) Mozilla.Firefox 127.0.2 winget
```
NOTE: `winget list | detect columns --guess` does not panic, but sadly
still does not work as expected. I believe this is not a nushell issue
anymore, but a `winget` one. When being piped, `winget` seems to add
extra whitespace and random `\r` symbols at the beginning of the text.
This messes with the column detection, of course.
# User-Facing Changes
`detect columns --guess` should not panic when receiving output from
`winget list` at all anymore.
A breaking change is the skipping of decoration lines, especially since
scripts probably were doing something like
`winget list | lines | reject 1 | str join "\n" | detect columns
--guess`. This will now cause them to reject a line with valid data.
# Tests + Formatting
Added tests that exercise these edge cases, as well as a single-column
test to make sure that trivial cases keep working.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Recommend holding until after #13125 is fully digested and *possibly*
until 0.96.
# Description
Fixes one of the issues described in #13125
The `do` signature included a `SyntaxShape:Any` as one of the possible
first-positional types. This is incorrect. `do` only takes a closure as
a positional. This had the result of:
1. Moving what should have been a parser error to evaluation-time
## Before
```nu
> do 1
Error: nu:🐚:cant_convert
× Can't convert to Closure.
╭─[entry #26:1:4]
1 │ do 1
· ┬
· ╰── can't convert int to Closure
╰────
```
## After
```nu
> do 1
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #5:1:4]
1 │ do 1
· ┬
· ╰── expected block, closure or record
╰────
```
2. Masking a bad test in `std assert`
This is a bit convoluted, but `std assert` tests included testing
`assert error` to make sure it:
* Asserts on bad code
* Doesn't assert on good code
The good-code test was broken, and was essentially bad-code (really
bad-code) that wasn't getting caught due to the bad signature.
Fixing this resulted in *parse time* failures on every call to
`test_asserts` (not something that particular test was designed to
handle.
This PR also fixes the test case to properly evaluate `std assert error`
against a good code path.
# User-Facing Changes
* Error-type returned (possible breaking change?)
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
This PR adds a new subcommand `query webpage-info` to `plugin_nu_query`.
The subcommand is a basic wrapper for the
[`webpage`](https://crates.io/crates/webpage) crate.
Usage:
```
http get https://phoronix.com | query webpage-info
```
and it returns a `Record` version of
[`webpage::HTML`](https://docs.rs/webpage/latest/webpage/struct.HTML.html).
The PR also takes a shot at bringing @lily-mara 's
[nu-serde::to_value](https://github.com/nushell/nushell/pull/3878/files)
back to life, updating it for the latest version of nushell. That's not
the main focus of the PR though - I just didn't want to have to
implement a custom converter for `webpage::HTML` 😅. If it looks
reasonable we could move it to `nu_protocol`(?) either in this PR or a
future one (along with adding tests for it).
# User-Facing Changes
no breaking changes
# Description
Sometimes it's helpful to deal with only ASCII. This command will take a
unicode string as input and convert it to ASCII using the deunicode
crate.
```nushell
❯ "A…B" | str deunicode
A...B
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes#13269. The splitting code in `guess_width.rs` was
creating slices from char indices, instead of byte indices. This works
perfectly fine for 1-byte code points, but panics or returns wrong
results as soon as multibyte codepoints appear in the input. I
originally discovered this by piping `winget list` into `detect columns
--guess`, since winget sometimes uses the unicode ellipsis symbol (`…`)
which is 3 bytes long when encoded in utf-8.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`detect columns --guess` should not crash due to multibyte unicode input
anymore
before:
after:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- Added tests to `guess_width.rs` for testing handling of multibyte as
well as combining diacritical marks
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The standard library's `path add` function has some surprising side
effects that I attempt to address in this PR:
1. Paths added, if they are symbolic links, should not be resolved to
their targets. Currently, resolution happens.
Imagine the following:
```nu
# Some time earlier, perhaps even not by the user, a symlink is created
mkdir real-dir
ln -s real-dir link-dir
# Then, step to now, with link-dir that we want in our PATHS variable
use std
path add link-dir
```
In the current implementation of `path add`, it is _not_ `link-dir` that
will be added, as has been stated in the command. It is instead
`real-dir`. This is surprising. Users have the agency to do this
resolution if they wish with `path expand` (sans a `--no-symlink` flag):
for example, `path add (link-dir | path expand)`
In particular, when I was trying to set up
[fnm](https://github.com/Schniz/fnm), a Node.js version manager, I was
bitten by this fact when `fnm` told me that an expected path had not
been added to the PATHS variable. It was looking for the non-resolved
link. The user in [this
comment](https://github.com/Schniz/fnm/issues/463#issuecomment-1710050737)
was likely affected by this too.
Shells, such as nushell, can handle path symlinks just fine. Binary
lookup is unaffected. Let resolution be opt-in.
Lastly, there is some convention already in place for **not** resolving
path symlinks in the [default $env.ENV_CONVERSIONS
table](57452337ff/crates/nu-utils/src/sample_config/default_env.nu (L65)).
2. All existing paths in the path variable should be left untouched.
Currently, they are `path expand`-ed (including symbolic link
resolution).
Path add should mean just that: prepend/append this path.
Instead, it currently means that, _plus mutate all other paths in the
variable_.
Again, users have the agency to do this with something like `$env.PATH =
$env.PATH | split row (char esep) | path expand`.
3. Minorly, I update documentation on running tests in
`crates/nu-std/CONTRIBUTING.md`. The offered command to run the standard
library test suite was no longer functional. Thanks to @weirdan in [this
Discord
conversation](https://discord.com/channels/601130461678272522/614593951969574961/1256029201119576147)
for the context.
# User-Facing Changes
(Written from the perspective of release notes)
- The standard library's `path add` function no longer resolves symlinks
in either the newly added paths, nor the other paths already in the
variable.
# Tests + Formatting
A test for the changes working correctly has been added to
`crates/nu-std/tests/test_std.nu` under the test named
`path_add_expand`.
You can quickly verify this new test and the existing `path add` test
with the following command:
```nu
cargo run -- -c 'use crates/nu-std/testing.nu; NU_LOG_LEVEL=INFO testing run-tests --path crates/nu-std --test path_add'
```
All commands suggested in the issue template have been run and complete
without error.
# After Submitting
I'll add a release note to [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged.
# Description
Allows specifying multiple attributes to retrieve from the selected
nodes. E.g. you may want to select both hrefs and targets from the list
of links:
```nushell
.... | query web --query a --attribute [href target]
```
# User-Facing Changes
`query web --attribute` previously accepted a string. Now it accepts
either a string or a list of strings.
The shape definition for this flag was relaxed temporarily, until
nushell/nushell#13253 is fixed.
# Description
Upgrading to Polars 0.41
# User-Facing Changes
* `polars melt` has been renamed to `polars unpivot` to match the change
in the polars API. Additionally, it now supports lazy dataframes.
Introduced a `--streamable` option to use the polars streaming engine
for lazy frames.
* The parameter `outer` has been replaced with `full` in `polars join`
to match polars change.
* `polars value-count` now supports the column (rename count column),
parallelize (multithread), sort, and normalize options.
The list of polars changes can be found
[here](https://github.com/pola-rs/polars/releases/tag/rs-0.41.2)
# Description
This might help @hustcer debug problems with `setup-nu`. The error
messages with the file I/O in `modify_plugin_file()` are not currently
not specific about what file path was involved in the I/O operation.
The spans on those errors have also changed to the span of the custom
path if provided.
# User-Facing Changes
- Slightly better error
In this pull request, I converted the `perf` function within `nu_utils`
to a macro. This change facilitates easier usage within plugins by
allowing the use of `env_logger` and setting `RUST_LOG=nu_plugin_polars`
(or another plugin). Without this conversion, the `RUST_LOG` variable
would need to be set to `RUST_LOG=nu_utils::utils`, which is less
intuitive and impossible to narrow the perf results to one plugin.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
fixes#13245
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
In addition to addressing #13245, this PR also updated one of the doc
example to the `find` command to document that non-regex mode is case
insensitive, which may surprise some users.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Ben Yang <ben@ya.ng>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
fixed#11678
The sub-commands of from command (`from {csv, tsv, ssv}`) name columns
starting from index 0.
This behaviour is inconsistent with other commands such as `detect
columns`.
This PR makes the subcommands index 0-based.
# User-Facing Changes
The subcommands (`from {csv, tsv, ssv}`) return a table with the columns
starting at index 0 if no header data is passed.
```
~/Development/nushell> "foo bar baz" | from ssv -n -m 1
╭───┬─────────┬─────────┬─────────╮
│ # │ column0 │ column1 │ column2 │
├───┼─────────┼─────────┼─────────┤
│ 0 │ foo │ bar │ baz │
╰───┴─────────┴─────────┴─────────╯
~/Development/nushell> "foo,bar,baz" | from csv -n
╭───┬─────────┬─────────┬─────────╮
│ # │ column0 │ column1 │ column2 │
├───┼─────────┼─────────┼─────────┤
│ 0 │ foo │ bar │ baz │
╰───┴─────────┴─────────┴─────────╯
~/Development/nushell> "foo\tbar\tbaz" | from tsv -n
╭───┬─────────┬─────────┬─────────╮
│ # │ column0 │ column1 │ column2 │
├───┼─────────┼─────────┼─────────┤
│ 0 │ foo │ bar │ baz │
╰───┴─────────┴─────────┴─────────╯
```
# Tests + Formatting
When I ran tests, `commands::touch::change_file_mtime_to_reference`
failed with the following error.
The error also occurs in the master branch, so it's probably unrelated
to these changes.
(maybe a problem with my dev environment)
```
$ toolkit check pr
~~~~~~~~
failures:
---- commands::touch::change_file_mtime_to_reference stdout ----
=== stderr
thread 'commands::touch::change_file_mtime_to_reference' panicked at crates/nu-command/tests/commands/touch.rs:298:9:
assertion `left == right` failed
left: SystemTime { tv_sec: 1719149697, tv_nsec: 57576929 }
right: SystemTime { tv_sec: 1719149697, tv_nsec: 78219489 }
failures:
commands::touch::change_file_mtime_to_reference
test result: FAILED. 1533 passed; 1 failed; 32 ignored; 0 measured; 0 filtered out; finished in 10.87s
error: test failed, to rerun pass `-p nu-command --test main`
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🔴 `toolkit test`
- ⚫ `toolkit test stdlib`
```
# After Submitting
nothing
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
The derive macros provided by #13031 are very useful for plugin authors.
In this PR I made use of these macros for two commands.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This Example usage could be highlighted in the changelog for plugin
authors as this is probably very useful for them.
