This speeds up parallel unit test runs from a very consistent 2:49 to
a very consistent 1:53, or a 33% reduction.
Signed-off-by: Ryan Davis <zenspider@chef.io>
+ Add CHEF_LICENSE env variable.
+ Switch to using powershell to invoke inspec.
I still think we should look into using `spawn`, but this is a good
start.
This probably doesn't fix the rest of the tests, but they're SO slow
locally that I'm gonna start this PR.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Not sure how it was supposed to work in the first place. The plugin in
question depends on ordinal_array and that wasn't in that fixture dir.
Switching to 2 is all it apparently needed.
This does cause yet another double-load warning (VERSION already
defined). I don't know how we're supposed to get around that with the
way we've set up these tests.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Helps testing and lots of other things if we only use $stdout/$stderr.
STDOUT/STDERR should only be used to restore the globals.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Trying to fix file_test failure that only happens on travis.
The "mock" file in question is supposed to have a stat of 644, but
actually has 664 but only on travis-ci.
Signed-off-by: Ryan Davis <zenspider@chef.io>
This time between:
+ PluginManagerCliDefinitionTests#(?:test_plugin_registered
+ PluginLoaderTests#test_load_mock_plugin_by_gem
Signed-off-by: Ryan Davis <zenspider@chef.io>
Specifically, if these were run in this order:
+ PluginLoaderTests#test_load_mock_plugin_by_gem
+ PluginInstallerInstallationTests#test_install_a_gem_from_local_file
the latter would fail.
The failure was in test setup. The solution was partially to crib off
of and normalize with LoaderTest setup/teardown and partially to set extra things.
Specifically:
+ HOME wasn't being set so it was finding my ~/.inspec/plugins.json
+ ENV wasn't being reset for Gem.paths
+ Installer wasn't being reset correctly, so plugins were known across tests.
Signed-off-by: Ryan Davis <zenspider@chef.io>
+ Added SLOW=1 to appveyor (I hope?) and travis.
+ Off by default.
Speeds up installer tests from ~5.5 seconds to ~0.5 seconds.
Once this is established, we can push this up to the main helper and
generalize if it works out for us.
Signed-off-by: Ryan Davis <zenspider@chef.io>
+ Do extra cleanup of loaded_specs for the dependencies.
+ Ensure rake is actually activated.
Fixes#4030.
Fixes#4026.
Signed-off-by: Ryan Davis <zenspider@chef.io>
As commented, I'm happy to push this to our tests, but it does seem
odd that we'd install rdoc/ri for plugins.
Signed-off-by: Ryan Davis <zenspider@chef.io>
+ float? comparison can raise a TypeError
+ octal? comparison was allowing non-octal values (which cast to 0)
+ symbol comparison was casting to a string, but then doing an == check instead of casecmp.
The latter seems optional, but consistent with the intent of cmp.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Moved exec_inspec to inspec_path.
Added new exec_inspec that invokes ruby w/ -Ilib (expanded).
Decouples from bundler and/or needing inspec-bin to be installed.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Can also try to use the bundler version first and then fall back to
VERSION... but VERSION is absolutely free.
Happy to push an edit to this to remove the comment or fold it in.
Signed-off-by: Ryan Davis <zenspider@chef.io>
This was testing serverspec compatibility, but those days are long past us and this is a deprecated resource now. This will quiet our tests up a bit.
Signed-off-by: Tim Smith <tsmith@chef.io>
RSpec is used internally. Minitest is used for our tests. They don't
really like each other. This fixes that and gets our tests
consistently running the correct number of tests (they were load-order
dependent before and each platform had its own different number of
tests it would run).
Signed-off-by: Ryan Davis <zenspider@chef.io>
These tests both involve dynamic un-rooted classes. As such, they have
no name and thus print like #<Class:0xXXXXXXXX:...>. I switched one to
a describe instead of Class.new(Minitest::Test) and the other I
stringified the anonymous class.
Signed-off-by: Ryan Davis <zenspider@chef.io>
The #disable_telemetry method now toggles @telemetry_toggle_off.
The @telemetry_toggle_off is defaulted to false
The #telemetry_enabled? method now checks @telemetry_toggle_off
and we generally check the configuration. We do not flip
@telemetry_toggle_off based on the content of the configuration.
Signed-off-by: Miah Johnson <miah@chia-pet.org>
Because of the way the test system loads I cannot guarantee that
`Inspec::Config.cached` won't be nil. I have to always pass in a mock
config object with our setting.
Signed-off-by: Miah Johnson <miah@chia-pet.org>
+ Turn off verbosity in Rakefile by default. Use `rake V=1` to turn back on.
+ MiniTest -> Minitest everywhere.
+ MiniTest::Unit::TestCase -> Minitest::Test everywhere.
+ Updated minitest doco urls to official and up-to-date site.
+ Normalize requires. Only needs "minitest/autorun" and "minitest/pride".
Signed-off-by: Ryan Davis <zenspider@chef.io>
Adds missing functionality to `interface`. Fixes#1830
```
describe interface("eth0") do
its(ipv4_addresses) { should include 1.2.3.4 }
end
```
And so on... see diff/docs for additional matchers.
Signed-off-by: Matt Kulka <mkulka@parchment.com>
This converts all current deprecation warnings/TODOs to use the
`Inspec.deprecate()` deprecation facility.
This also modifies `Inspec.deprecate()` to only require 1 argument.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
By specifying a `max_redirects` attribute, the `http` resource worker
will follow any HTTP Redirect response (301, 302, etc...) up to the
limit defined by this attribute. For a local worker, exceeding that
limit will raise a `FaradayMiddleware::RedirectLimitReached` exception.
For a remote worker, the curl command will exit without populating the
`status` and `body` properties.
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
This works around a current bug in PowerShell where the output cannot be
parsed as JSON.
The `-Compress` flag does not affect the validity of the data but only
the appearance of the string.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This does the following:
- Captures warning for lack of `--sudo` with `--sudo-password`
- Captures warnings for transformation of URL target in url fetcher
- Changes deprecated `supports:` syntax to use new syntax
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
Remove container setup that comes for free with the dokken containers now
Use the new openssl resource names
Remove all the encoding statements that even rubocop doesn't recommend anymore
Remove some compatibility with centos-5 and ubuntu 15.10
Signed-off-by: Tim Smith <tsmith@chef.io>
We run apt_update once with chef and we already update the cache directly on the container at start. We don't need to try to do the same thing 3 other times.
Signed-off-by: Tim Smith <tsmith@chef.io>
We have an apt_update resource now
Yum cookbook was never needed
dnf is now supported on Fedora out of the box
Signed-off-by: Tim Smith <tsmith@chef.io>
With the changes in PR #3750, `Inspec::Backend.create` needs to support
both being passed a Hash and being passed an Inspec::Config. This adds
a line to convert a passed Hash to an Inspec::Config.
This also adds unit tests for Inspec::Backend because they were missing.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This changes the error message from using a bad reference in
`include_controls` from:
```
NoMethodError: undefined method `profile' for nil:NilClass
```
To one detailing that the profile cannot be loaded since it isn't listed
as a dependency.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This ensures that all the following result in the same CLI output:
- `inspec`
- `inspec help`
- `inspec --help`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This removes the following line from the test output:
```
Test Summary: 0 successful, 0 failures, 0 skipped
```
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
The value of `ciphers` is 681 on my localhost, but 993 on Travis.
This modifies the test to allow both values.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
Currently our supported profiles output a warning for every instance of `inspec check` because our license metadata `Proprietary, All rights reserved` is not considered valid.
This commit allows for a string beginning with `Proprietary` to be considered valid, as well as any valid SPDX value.
Signed-off-by: James Stocks <jstocks@chef.io>
This PR adds 5 closely related plugin types, which allow a plugin to implement new DSL methods / keywords. The mechanism to activate the plugins are all very similar - basically, in a particular location in the code, `method_missing` is implemented, and is used to activate the particular type of DSL being requested.
4 of the DSL plugin types relate to code that could appear in a profile control file.
* outer_profile_dsl plugins allow you to extend the code in profile Ruby files that appear outside `control` or `describe` blocks.
* control_dsl plugins allow you to extend the code within `control` blocks.
* describe_dsl plugins allow you to extend the code within `describe` blocks.
* test_dsl plugins allow you to extend the code within `it`/`its` blocks.
Finally, the `resource_dsl` plugin allows you to extend the code used within custom resources.
Basic unit tests are provided to prove that the plugin types are properly defined.
A simple plugin fixture defining DSL hooks (based on favorite foods) is included, and is exercised through a set of functional tests.
The plugin developer docs are updated to describe the 5 DSLs.
*Note*: Implementing a plugin using any of the DSL plugin types is experimental. The contexts that are exposed to the DSL methods are private and poorly documented. The InSpec project does not claim the APIs used by these plugin types are covered by SemVer. Plugin authors are encouraged to pin tightly to the `inspec` gem in their gemspecs.
Motivation for this plugin comes from the desire to allow passionate community members to implement things like "2 out of 3" tests, example groups, improved serverspec compatibility, "they/their" and other "fluency" changes, as well as make it possible for future work by the InSpec team to be implemented as a core plugin, rather than a direct change to the main codebase.
* add aws_eks_cluster
Signed-off-by: Timothy van Zadelhoff
timothy.inspec@theothersolution.nl
* disable ABC check on fetch_from_api
Signed-off-by: Timothy van Zadelhoff <timothy.inspec@theothersolution.nl>
* add status predicates
* Change docs for status attribute
Signed-off-by: Timothy van Zadelhoff <timothy.inspec@theothersolution.nl>
* Add integration tests
Signed-off-by: Timothy van Zadelhoff <timothy.inspec@theothersolution.nl>
* Adjust EKS build code to almost work
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* EKS only uses private subnets - integration tests pass
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Correct AWS Exception class for resource search miss in unit test
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Update unit test to reflect AWS resource-standard miss behavior, returning nil for most properties
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Update package.rb to solve issue #3361
Update the windows package search regex.
According to issue #3361
* Update package.rb
Fix trailing spaces
* Update helper.rb
update sha for get-item-package. To fix the issue #3361
Signed-off-by: markus hackethal <mh@it31.de>
* Improve filesystem.rb to support windows
improve filesystem.rb to support windows.
Split into 2 classes LinuxFileSystemResource / WindowsFileSystemResource
Add filesystem to verify a FS-type ( currently not for linux because missing test server )
Size on Windows is converted to GB - discussion about this welcome
update to reflect also windows os
* Create get-wmiobject-filesystem
* Delete get-wmiobject-filesystem
* Fix the testing code for filesystem.
Change its 'filesystem' to 'type' according to recommendation from @miah
Signed-off-by: Markus Hackethal <mh@it31.de>
* Revert "Silence RSpec 'should' Warning (#3560)"
This reverts commit 7c611a4c24.
* Add comment with link to reverted fix
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add run_inspec_process, with JSON handling, to functional helper
* Add ability to run a plugin to functional helper
* CWD fix for run_inspec_process
* Add support for running a plugin within a functional test
* Move plugin functional helper code to main func helper file
* FuncHelper: Do not send reporter or lock options if command is not exec
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* unit tests for plugin conf file class, all skip
* File path stuff works
* Validation works
* Add works
* Added remove_entry
* Save works - ready to refactor others
* Rework Loader to use ConfigFile
* Modify loader and installer to use the config file class
* linting
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* When pty is used not having --no-pager makes inspec hang during the test
* Updated tests
Signed-off-by: Jose Alexandre <jose.alexandre@worldfirst.com>
* add security-group to security-group rules
* update docs
* Add integration tests for security-group to security-group rules
* rubocop fix
* Add one security group rule, with position.
* make control fit description
Signed-off-by: Timothy van Zadelhoff <timothy.inspec@theothersolution.nl
* Add support for `git@` and HTTP basic auth
This adds support for the following:
```
inspec exec git@github.com:private/example_profile
inspec exec https://username:token@github.com/private/example_profile
inspec exec https://username:password@webserver/private/example_profile
```
This also uses the Git fetcher when the URL ends in `.git`. Example:
```
git config credential.helper cache
git ls-remote https://github.com/private/example_profile.git
inspec exec https://github.com/private/example_profile.git
```
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add documentation for `inspec exec` usage
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add tests for Git fetcher and `inspec exec`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add `opts` to branch of Git fetcher resolve logic
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Modify Git example comments
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Force `parse_uri` to attempt a parse
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Allow add_test to accept negation
This will allow for negated tests to be generated with add_tests.
* Fix rubocop violation
* Add optional options hash
Signed-off-by: Rachel Rice <rrice@chef.io>
Methods like…
* `count()` return `Integer` values
* `boolean()` return `TrueClass`/`FalseClass` values
* `concat()` return `String` values
…but threw exceptions because those types weren't supported.
This adds support to the `xml` resource, and adds tests to verify some of those examples.
Signed-off-by: Mark Hughes <greenantdotcom@users.noreply.github.com>
* Failing functional test for RSpec should deprecation
* Configure RSpec to allow .should calls
* Remove cruft from test files where we needed to filter deprecation warning
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Fixes (some) ruby warnings related to functional tests
* Removes unneeded `Dir.tmpdir` from test
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* ✓ adds additional checks for vendored profiles
This PR adds additional checks to verify if:
- inspec.yml and inspec.lock dependencies are out-of-sync
- complains about a missing lock file if we have dependencies defined
* skip if legacy profile path is used
* Fix unit tests.
* Force static sha256 for lock files and protect from unnamed depends.
* Add vendor profiles for checks. Windows downloads with different sha256.
* Adding inspec init profile for GCP.
* Adding final newline, thanks rubocop.
* Ensure README headings are at the same level.
* Move OS-specific default profile to new location
* Enforce os-platform restriction on default profile template
* Use profile templates in subdirs.
* Updates to address PR feedback after rebasing from #3491.
* Alter test setup to properly use YAML
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Resource for a Windows Security Identifier (SID)
* Integration tests for security_identifier resource
* Address rubocop violations
* Improve security_identifier from PR feedback
* Update security_identifier tests
* Improve security_identifier unit tests
* Fix unit tests fpr security_identifier resource
* More security_identifier unit tests
* Add docs page for security_identifier resource
* Fix issues with documentation
* Improve docs
Link to Microsoft reference page, and use their term 'trustee' instead of 'entity' where applicable.
* Change exists to exist
* Test appveyor file changes.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add missing tests for groups resource, document members propery, and assorted fixes.
Update existing documentation for group resource.
Add documentation for groups resource.
Update group resource tests to test members property.
Change groups resource members property to have simple style. (this
ensures members is a single array)
remove deprecated have_gid propery.
change `if !` to `unless`
Remove early return from members method. This prevented members from
working correctly on any OS other than Windows.
Add missing tests for the groups resource.
remove tests for has_gid
Signed-off-by: Miah Johnson <miah@chia-pet.org>
* Fix comments
Signed-off-by: Jared Quick <jquick@chef.io>
* Allow strings or symbols to be used interchangeably in filtertable criteria; improve error message
* rubocop
* Update test count
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Remove deprecated yumrepo. (#3435)
* Remove deprecations for cli `--format` and metadata.rb (#3452)
* Remove deprecated database_helpers stderr/stdout methods.
Update deprecation text for processes/apache.
* Remove deprecations for `--format` and metadata.rb
Remove deprecated `format` code.
Remove deprecated code test and change json-config format test to use
reporter.
Remove deprecated metadata.rb code
Remove deprecation notice for old supports syntax.
Deprecate metadata.rb from source_reader
Remove rubocop disables as they are no longer required for this code block.
Remove deprecated legacy metadata.rb mock profiles.
Remove deprecated metadata.rb profile tests.
Remove deprecated yumrepo test.
* Allow inspec-3.0 branch to be tested.
* Allow appveyor to test inspec-3.0 branch
* Change runner tests to use reporter rather than format.
Remove deprecated `supports: linux` tests.
* Remove skip from inherited profiles from showing up in reporting (breaking change) (#3332)
* Skip loading dependency profiles if they are unsupported on the current
platform.
Skip loading dependencies if they are unsupported on the current
platform.
Wrap our log and next in a conditional checking if the platform is
supported.
Change a `if !` into a `unless`
Check if the backend is a Train Mock Connection and if so say that the
profile does support the platform.
While iterating through tests being loaded skip when the platform is
unsupported.
We now log a WARN when a profile is skipped due to unsupported platform,
so lets check that.
Modified existing test to log that there are 0 skipped tests, instead of
2.
Add functional test that loads profile-support-skip with a json reporter
to check that our controls are not loaded and that stderr contains our
warning.
* Rather than iterating through each test return before recursion if the platform is
unsupported.
* Resolve tests using a supported platform different from testing platform
Add a control to `test/unit/mock/profiles/complete-profile` that would
work on any OS with a Internet connection. This allows the profile
to execute on any OS with success. `filesystem_spec.rb` was a control
that would only work on Linux and some BSD's.
We want profile tests to consistently work across development and testing
platforms, and not get 'skipped' in some cases. Travis-CI tests on Linux,
Inspec Dev team uses Linux and MacOS, Appveyor tests on Windows
Also Updated `file_provider_test.rb` for `complete-profile` content changes.
If you `MockLoader.load_profile` on a unsupported platform you might not
hit the usual skip. Lets handle situations where the tests array in
Profile#load_checks_params could be nil.
* Use safe navigation rather than checking if tests is nil.
Update tests to point to unsupported_inspec and account for WARN changes.
Make unsupported_inspec profile support os-family 'unsupported_inspec'
* Fix skip bug when using include/require controls. (#3487)
* Fix skip bug when using include/require controls.
* fix test and feedback.
* Remove need for UUID detection for Automate report (#3507)
* Add json metadata for skipped profiles (#3495)
* Add skip metadata to json reports
* Unify skip messages.
* Update with status field.
* Add testing.
* Fix tests.
* lint
* Add skip exit codes for profile skips.
* Update website for 3.0 launch
Add `plugins` to sidebar.
Change 2.0 -> 3.0 in slim files.
Update 3.0 features list.
* Fix comments
* Update float to numeric.
* Change Float to numeric.
* updated feature list and impact doc
* Change "What's new in InSpec 3.0" -> "Announcing InSpec 3.0"
* Bump VERSION to 3.0.0 (#3511)
* Remove 3.0 testing checks.
* Fix azure link.
* Unit and functional tests for a reject list facility
* Implementation of plugin reject facility
* Initial draft of reject list
* Add option to search to hide test fixture by default
* Fix test
* PR feedback
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Move compliance pluging to v2 system.
* Update kitchen-inspec to test.
* Add legacy require patsh.
* Fix unit test
Signed-off-by: Jared Quick <jquick@chef.io>
For larger processes, Busybox's ps displays the vsz and rss columns in
megabytes or gigabytes, with no option I've found to override the behavior.
This change updates the process regex to account for that and converts
the values to kilobytes so they can still be cast as integers.
Signed-off-by: Jonathan Hartman <j@hartman.io>
* Unit tests passing for loading Train plugins
* detect works with a train test fixture
* Update fixture install of train-fixture-plugin
* Add functional tests for detect and shell when talking to a train plugin backend
* Update docs to reflect availability of Train plugins
* Functional test for install train plugin from path
* Working install train plugin from path, more tests for installing from odd locations
* PR Feedback
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add support for multiple descriptions for controls
This adds the ability to specify multiple descriptions in controls.
Example:
```ruby
control 'my-control' do
impact 1.0
title 'My control'
desc 'A default description'
desc 'rational', 'I need an example'
describe file('/tmp') do
it { should be_directory }
end
end
```
Many thanks to @jquick for helping me with the unit tests.
* Remove unused `descriptions` method
* Remove unused profile from test mocks
* Respond to feedback
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Functional test for usage messaging
* Activate v2 commands on empty CLI invocation for usage messaging
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add audit integration testing.
* Add some docs and feedback changes.
* Updated integration task to use paramaters and clean it up.
* Fix unit test
Signed-off-by: Jared Quick <jquick@chef.io>
* Sketch out in comments the unit and functional tests for the installer
* Make a test fixture gem, v0.1.0
* Add a 0.2.0 version of the test fixture gem, this one with a dependency
* Add a fixture with a pre-installed gem
* Correct test-fixture 0.1.0 gem
* Moockup of installed inspec-test-fixture gems
* Uggh add gemspec files to mock installs
* Update gem fixtures, and add a script that does it for me
* Able to load from and list privately managed gems
# Conflicts:
# lib/inspec/plugin/v2/loader.rb
* Expanded tests, starting on implementation of installer
# Conflicts:
# test/unit/plugin/v2/loader_test.rb
* Install plugin from local gem file works
* Writes the plugins.json file; needs refactor
* Gem install works; no version pinning
* Install with pinned version works
* Install from path works
* update works
* Validation for uninstall
* Uninstall from path works
* Uninstaller works on gems
* Add search to installer API.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Move inspec init to v2 plugins.
* Revert inspec run command env change.
* Allow prefix and env for run_inspec_process.
* Update unit tests to use new functionality.
Signed-off-by: Jared Quick <jquick@chef.io>
This is useful when you have multiple versions of the same gem installed. It can be leveraged like so:
```
describe gem('rest-client') do
its('versions') { should include /1.8\.\d+/ }
its('versions') { should include /2.0\.\d+/ }
its('versions.count') { should_be eq 2 }
end
```
Signed-off-by: Ben Abrams <me@benabrams.it>
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
Signed-off-by: Jared Quick <jquick@chef.io>
* Fix profile vendoring on Windows
This fixes vendoring on Windows by doing the following:
- Expanding relative paths (handles `\\`)
- Ensuring archives after closed after reading (prevents locking)
This also does the following:
- Removes extra file from testing tar archive
- Ensures fetching dirs/archives in the local fetcher behaves the same
* Fix profile vendoring on Windows
This fixes vendoring on Windows by doing the following:
- Expanding relative paths (handles `\\`)
- Ensuring archives after closed after reading (prevents locking)
This also does the following:
- Removes extra file from testing tar archive
- Ensures fetching dirs/archives in the local fetcher behaves the same
* Add vendoring to fuctional testing and fix the tmp path for windows
* Add tests for relative paths and backslashes
* Remove backslashes support in filenames on Linux
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add impact class which contains all cvss scores.
* Add testing for impact changes.
* Change symbols to strings for impact.
* Update error messages to be more clear.
* Fix test with new sha
Signed-off-by: Jared Quick <jquick@chef.io>
* Add windows functional tests.
* Fix tests for 2012 server.
* Fix windows build script
* Add more functional tests for windows.
* Update comment with TODO.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add yml attribute option.
* Add type matching.
* Add testing profile for global attributes testing all types.
* Allow attributes to be called within a control block.
* Fix attribut test issues and allow value to be set at runtime.
* Allow setting attr value after creation.
* Move attributes to global namespace.
* Move attributes to a singleton object.
* Add unit and updated functional testing.
* Rename attributes to attributes_test so the testhelper picks it up.
* Add attribute object tests and error types.
* Update with feedback changes.
* Remove extra line.
* Move attribute registry class file.
* Add documentation for attributes
* Rename rspec_extensions.
* Add some failing functional tests.
* Update docs and fix typos.
Signed-off-by: Jared Quick <jquick@chef.io>
* Allow uuid passthrough
* Update flag to be target-id.
* Updated to use proper formatting for header.
* Fix empty line after cli banner.
Signed-off-by: Jared Quick <jquick@chef.io>
* Leverage existance check in Compliance::Fetcher.resolve to not re-download locally cached profiles
* Move logic from Compliance::API.exist? to Compliance::API.profiles to reuse code in cases where we need to access profiles' metadata directly.
* Declare @upstream_sha256 if target is a string
* Handle other fetchers that don't support upstream_sha256 within Inspec::CachedFetcher.initialize
* Add initialize for Compliance::Fetcher to not pollute Fetchers::Url with its logic
* Add Compliance::Fetcher.sha256 to leverage upstream_sha256 instead of relying on inherited method from Fetchers::Url
* Revert changes to cached fetcher that are unnecessary after refactor
* Pacify the god of ruby syntax
* Move Compliance::API.profiles filtering logic to end of method to leverage normalization of mapped_profiles
* Add and update unit tests to support caching with Compliance::Fetcher.upstream_sha256
Signed-off-by: Josh Hudson <jhudson@chef.io>
This does the following:
- Adds `--sudo` if using `--sudo-password`
- Warns the user if using `--sudo-password` without `--sudo`
- Adds unit tests for `Inspec::BaseCLI#opts`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* adding cloudlinux into the mocker under the redhat family as it is found inside of train, and creating tests for cloudlinux that mirror the centos/redhat tests.
* adding cloudlinux under the select_service_mgmt method so that it can be matched.
Signed-off-by: Vern Burton <me@vernburton.com>
* Functional tests for userdir option
* Accepts --config-dir CLI option
* Actually loads a config file from the config dir, more cases to test
* Able to load config and verify contents from config-dir
* Functional tests to ensure precedence for config options
* Enable setting config dir via env var
* .inspec, not .inspec.d
* Begin converting PluginCtl to PluginLoader/Registry
* Able to load and partially validate the plugins.json file
* More work on the plugin loader
* Break the world, move next gen stuff to plugin/
* Be sure to require base cli in bundled plugins
* Move test file
* Revert changes to v1 plugin, so we can have a separate one
* Checkpoint commit
* Move v2 plugin work to v2 area
* Move plugins v1 code into an isolated directory
* rubocop fixes
* Rip out the stuff about a user-dir config file, just use a plugin file
* Two psuedocode test file
* Working base API, moock plugin type, and loader.
* Adjust load path to be more welcoming
* Silence circular depencency warning, which was breaking a unit test
* Linting
* Fix plugin type registry, add tests to cover
* Feedback from Jerry
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Allow the jsonMerged report to be executed from cli.
* Renamed reporter to json-automate and added in comments.
Signed-off-by: Jared Quick <jquick@chef.io>
* Error cleanly if a reporter error while rendering.
* Add functional test for automate reporter.
* Remove authors.
Signed-off-by: Jared Quick <jquick@chef.io>
to set_skip_rule could be a boolean, or a message. Now value should
always be a boolean, and if a message is needed one can be passed and
will be set.
Allow only_if to take a message during control_eval DSL.
Add test for only_if(message).
Signed-off-by: Miah Johnson <miah@chia-pet.org>
* Add --vendor-cache flag for archive, check, and json commands.
* Remove unused ignore_supports flag for Inspec::Runner.
This flag was only set in two code paths that did not call
Inspec::Runner so setting it did not have any effect.
Signed-off-by: Pete Higgins <pete@peterhiggins.org>
* Provide a json_merge report used by A2 that merges all child profiles.
Signed-off-by: Jared Quick <jquick@chef.io>
* Merge profile controls from child up until we find something usable.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add testng for json_merged report.
Signed-off-by: Jared Quick <jquick@chef.io>
* Push the profile population to be later in the report.
Signed-off-by: Jared Quick <jquick@chef.io>
* windows_feature resource: Add DISM support
This modifies the `windows_feature` resource to fallback to DISM when
the `Get-WindowsFeature` command is not available.
* Allow specifying `:dism` or `:powershell`
* Replace stacktrace with smaller error message
* Add notes/todo about raise behavior
* Remove duplicated platform check
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* cli: Downcase supermarket tool name to match URL
This downcases the user provided tool name. Without this fetching the
profile will fail because the Supermarket API downcases in the URL.
* Add another downcase
* Add handling for `supermarket://owner_but_no_name`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Constrain RuboCop disables to single method
* Add comment to Alpine package command
* Use single quotes for Alpine package command
* Change `it` statement to be readable
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
Context:
When testing a Windows registry key with a period character in it e.g. `explorer.exe` it is not possible to use `its("explorer.exe")` because the period would be interpreted as method chaining.
In this case, you must instead use `its(["explorer", "exe"])`
See https://github.com/inspec/inspec/issues/1281
This commit fixes `to_ruby`in `Inspec::Describe` so that it produces an array in the generated Inspec code instead of a string.
Signed-off-by: James Stocks <jstocks@chef.io>
* Use fail_resource rather than skip_resource when the platform is not
supported by the resource.
* Update tests to handle failing on unsupported platforms.
Update functional tests.
Signed-off-by: Miah Johnson <miah@chia-pet.org>
* Functional tests for regex control selection
* Implementation for regex-based control filtering
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
profile name. eg "with/slash" would result in a profile created in the
"with" directory named "slash"
Add test for inspec init, and updated other for new output.
Clean up profiles created during testing and place them in temporary
directories.
Describe our test a bit better.
Check that the profile was created in the right location.
Check that the profile is named correctly.
Signed-off-by: Miah Johnson <miah@chia-pet.org>
* Updating inspec with bastion options as per https://github.com/inspec/train/pull/310
* Updating train pin
* Adding --password to pass the test
* Revert "Updating train pin"
* PR changes
Signed-off-by: Noel Georgi <18496730+frezbo@users.noreply.github.com>
* Sort `Dir.entries` in functional test
Ruby's `Dir.entries` differs between OS's. This ensures the same order
is used when comparing two arrays.
* Remove unused variable `exec_out`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add long description to inspec exec command, mentioning exit codes
* Modify website doc builder code to use long description if available
* Functional test for --distinct-exit flag
* Implement --distinct-exit option
* Inspec shell also needs the option
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* apache_conf resource: Strip quotes from values
* Update regex to capture all vars between quotes
* Change `x` and `y` to proper variable names
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* A functional test for attributes
* Add tests for nested attrs in yaml
* remove commented-out tests
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Fix the control merging issues when overriding child controls.
* Fix rubocop issue and vendor compression.
* Add in lock file for vendor profile
Signed-off-by: Jared Quick <jquick@chef.io>
* Add insecure option to the automate report json.
* Add in automate and compliance json documentation.
* Fix typo.
Signed-off-by: Jared Quick <jquick@chef.io>
* Un-deprecate plural properties on shadow; deprecate the singular versions
* Update filtertable interface to current
* A weak attempt at making the docs coherent
* Doc feedback per Jerry
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* set port default to nil, introduce local_mode
* raise instead of warning
* restore default port, allow explicit nil
Signed-off-by: Tor Magnus Rakvåg <tm@intility.no>
* Adding YAML reporter
* Updating yaml o/p
* Removing comment
* Adding UT for YAML reporter, adding missing reporters
* This PR takes care of the following:
- Fixes the YAML reporter UT
- Adds the report method to YAML reporter to support code example as in #3085
- Disables the cyclomatic complexity Metric for reporter
Signed-off-by: Noel Georgi <18496730+frezbo@users.noreply.github.com>
* implement members property
* flatten groups entry, extract flatten helper
* lints
* more idiomatic spec, add example of members testing
Signed-off-by: Tor Magnus Rakvåg <tm@intility.no>
* Add integration and unit tests for aws_ec2_instances
* Basic docs for aws_ec2_instances
* Add basic aws_ec2_instances resource
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add check if aws s3 bucket is encrypted.
Required terraform aws provider >= 1.6
Fix indentation issue in aws_s3_bucket.rb
* Implement most changes recommended by @TrevorBramble, and refactored other methods to align with recommendations (except Terraform nitpick; preference is to keep coding style consistent until full refactor).
Signed-off-by: Jeremy Phillips <github@uranusbytes.com>
* nginx_conf resource: Fix include paths with quotes
* Move quote removal to `NginxParser`
* Add parsers/tests for quotes in quotes
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This change should make it easier to work with a running environment.
You may now apply changes without doing a full teardown/rebuild any time
you make a change to the terraform plan.
Adds some documenation on how to use the Terraform tooling.
Adds AZURE_LOCATION to override the default region.
Signed-off-by: David McCown <dmccown@chef.io>
* Update tests and docs to assume one recorder per region
* Config recorder supports singleton fetch
* Docs and tests for singleton mode delivery_channel
* Implementation for singleton delivery channel, and some other code cleanup
* Implement some feedback, and fix a bug in traversing the struct in looking for empty results
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Update terrform to 0.11.7 (latest) and aws plugin to 1.14; upgrade plugins on test startup
* TF route table resource doesn't export associations or routes attributes. Which we weren't using anyway.
* Downgrade to aws plugin 1.13 to avoid TF panic; suppress deprecation warning for aws_region
* Fix incoherent attribute combination on cloudtrail
* Add -auto-approve to suppress interactive confirmation
* Update version pinning for AWS minimal account
* Use a plan file in AWS runs
* Pin azure TF run to 0.11 and 1.3; also an autoformatter pass on the TF code.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Bug replication tests, unit and integration
* Fixes statement_count
* Fixes statement_count and have_statement
* rubocop trim whitespace
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Update singular implementation to avoid use of inner object
* Update docs and tests for 3 new filters and properties on aws_vpcs
* Implement new filters and properties; one failing test due to odd FilterTable behavior
* changes to avoid bug 2929
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add tests for method chained shadow resource with readable and
unreadable shadow files.
Ensure @params always has a safe value, otherwise we may stacktrace when
unable to read /etc/shadow and invoked with method chaining.
* Wrap deprecation notices with a proc/must_output to clean up test
output.
Added some missing newlines.
Catch deprecation notice on `lines`.
* Resolve the majority of the issues pointed out by @tbramble.
Deprecate `lines`; its really only used internally but it was 'exposed'
through tests and who knows if there is external use. `lines` is not
documented as a property at least..
`#set_params` is much better now =)
Signed-off-by: Miah Johnson <miah@chia-pet.org>
Provides low-, and mid-level properties and matchers for examining rules on aws_security_group.
* Second draft of docs for SG rules interface; need to clarify semantics of reject
* First cut at unit tests
* Cleanup test fixtures
* Implementation for allow, with plausible unit tests
* Doc updates based on reality
* Add integration tests; move allow to allow_ / out; several docs updates
* Add be_open_to_the_world and be_open_to_the_world_on_port
* Update docs to reflect adding allow_only
* Update docs to reflect use of position to allow multiple rules with 'only'
* Implement allow_only with unit tests; still need integration tests
* Add integration tests for allow_only
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* * Adds new property to test how many days ago the CloudTrail delivered logs to the CloudWatch Logs.
* * Changes query for selected cloud trail in unit test
* Changes uses Time.now explicitly instead of making a variable in the unit test
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
* Adds new property to test the users in an aws_iam_group
* Adds terraform code to add the recall_hit user to the administrator group
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
* Initial commit of skeletal resource aws_route_tables
* Fixes issues with documentation
* Renames route table terraform resources to be more conventional
* Removes tags terraform resources
* Changes aws_route_table and aws_route_tables integration tests to use new terraform names
* Removes unneeded data given in unit tests
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
* Initial commit of skeletal resource aws_s3_buckets
* Add fixes to documents
* Removes property 'creation_date' for there is no use case as of right now
* Rebases on master and moves aws_s3_buckets integration test to the correct location
* Adds test on unit test for false exists
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
* Adds chocolatey package resource
* Adds docs for chocolatey_package resource
* Differentiate chocolatey package from windows feature
Suggested by @frezbo
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Change `skip_resource` to use raise
* Add `supports` lines to example resource
* Change to rescue `StandardError` vs `Exception`
* Change raise to use `e.message` vs `$!`
* Remove redundant returns
* Change `File.exists?` to `File.exist?`
* Update shasum in tests
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add AWS hardware MFA matcher
Adding a hardware as well as a virtual MFA matcher for aws_iam_root_user
resource
* Add New AWS Root Matcher Docs
- Add documentation for new root MFA matchers
- Fix logic for checking MFA devices from feedback on PR
* Add Integration tests for MFA matchers
- Add integration tests for virtual and hardware MFA matchers
- Clean up logic for has_virtual_mfa_enabled? method
Signed-off-by: Paul Welch <pwelch@chef.io>
* Add python check for pip resource
When checking pip resources, we should skip resource if python is not
installed or we will fail with an error when trying to parse the path.
* Check pip command on windows
On Windows, if pip has a newer version available, it adds an error
message to stderr. Now checking if both stderr and stdout on windows
have values. If so, assume pip package is installed.
* Clean up powershell query command
- Make it easier to read what the powershell command is doing
- Make it easier to read what the cmd_successful method lokos for
Signed-off-by: Paul Welch <pwelch@chef.io>
Without the terminating character ($), it just accepted any characters
at all after the initial matching set.
Also add some tests to assure we're raising appropriately.
Co-authored-by: Trevor Bramble <tbramble@chef.io>
Co-authored-by: Joshua Padgett <jpadgett@chef.io>
Signed-off-by: Trevor Bramble <tbramble@chef.io>
This adds `powershell` resource support for non-Windows OSs via `pwsh`
and Base64 encoded commands.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Mitigate trivial warning on test by initializing
Also fixes passing a ambiguous argument.
* Mitigate trivial warning by removing redundant method
Signed-off-by: ERAMOTO Masaya <eramoto.masaya@jp.fujitsu.com>
* registry_key resource was returning an incorrect value
when key value was greater than 2147483647
* added mock
* Fix issue with default reg key
(default) key was returning nil even when a value was present.
Signed-off-by: Omar Irizarry <irizarry_omar_j@network.lilly.com>
* Initial commit of new skeletal resource aws_config_delivery_channel
* Changes delivery_frequency to be an integer and names delivery_frequency_in_hours
* Adds more documentation and clarifies descriptions
* Wraps API call in the aws_catch_errors function
* Changes config bucket name to use dashes instead of underscores
* Updates on master and changes directory location of build and integration files
* Fix integration tests to only create one ConfigRecorder
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
* Initial commit of skeletal resource aws_kms_key
* * Adds comments to rerun travis
* * Clarifies some parts of the doc.
* Changes matcher have_aws_key_manager to manged_by_aws
* Fixes copypasta
* Adds clarification to property names
* Fixes rescueing exceptions from the api
* raises exceptions in the unit tests
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
This mock was a remenant of file reading tests that became obsolete with
the centralization of that code.
Signed-off-by: Trevor Bramble <tbramble@chef.io>
* Clean up test data, correct parse error handling
* Use functional pipeline to avoid need for conditional clauses and clarify the intent of the comment parsing.
* Extract magic strings to constants
* Remove code and tests now covered by FileReader
Co-authored-by: Trevor Bramble <tbramble@chef.io>
Co-authored-by: Paul Welch <pwelch@chef.io>
Signed-off-by: Trevor Bramble <tbramble@chef.io>
* Initial commit of skeletal resource aws_sns_topics
* Adds clarification in documentation
* Adds functionality for calling the next token returned from aws api.
* Wraps api calls in the catch_aws_errs method
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
* Create file-check functionality into utility file
There are the similar issues as PR #2302. Almost resources return false
positives when a file does not exist or is not read.
* Replace to file-check functionality
* Fix dh_params and x509_certificate resources
If a file is empty, OpenSSL::PKey::DH and OpenSSL::X509::Certificate have
raised an exception and have skipped the inspection. Thus x509_certificate
and dh_params resources are not allowed to read a empty file.
* to_s of shadow expects filters is not nil
* Remove workaround of sshd_config
Removes the workaround of sshd_config since Travis CI fails due to a bug
of dev-sec/ssh-baseline and the PR #100 will fix it.
* Use init block variable in methods
Signed-off-by: ERAMOTO Masaya <eramoto.masaya@jp.fujitsu.com>
* Initial commit of new resource
* Makes changes to docs to match changes to the resources.
* Adds clarifications in docs and changes it to be an erb file.
* Simplifies some unit tests
* Wraps calls to the api in a aws_catch_errors method
* Removes provisioner terraform code
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
When testing on a filesystem used for a long time or built on a small
sized partition, the actual file order may be different from the
expected file order as below:
1) Failure:
inspec keyword::inspec.profile.files#test_0002_lists all profile files when calling #files [/work/git/inspec/test/unit/dsl/other_keywords_test.rb:50]:
--- expected
+++ actual
@@ -1 +1 @@
-["a_sub_dir/sub_items.conf", "items.conf"]
+["items.conf", "a_sub_dir/sub_items.conf"]
2) Failure:
SourceReaders::InspecReader::with a valid profile#test_0005_retrieves all extra files [/work/git/inspec/test/unit/source_readers/inspec_test.rb:39]:
--- expected
+++ actual
@@ -1 +1 @@
-["files/a_sub_dir/sub_items.conf", "files/items.conf"]
+["files/items.conf", "files/a_sub_dir/sub_items.conf"]
Signed-off-by: ERAMOTO Masaya <eramoto.masaya@jp.fujitsu.com>
* Modify version constraints to be an Array
This will allow both old and new versions of InSpec to parse the
`inspec.lock` correctly.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* quote password when generating mysql command string
* added a test for mysql_session, added shellwords escaping to mysql_session resource
* changed the name of the escape method
* clarified test conditions
Signed-off-by: Tom Hodder <tom@limepepper.co.uk>
shadow file.
After much thought the deprecations from #2642 were for the wrong methods.
Plural method names feel much more natural when working with this
resource because you can have more than a single result.
Consider a match like `shadow.user(/^www/)`, this could return multiple
users, so `shadow.users` feels more natural here.
The problem is that the fields we're matching in the shadow file itself
are singular. Each entry is for a user, which has a password, and some
other fields. A user never has `passwords` in the shadow file, only a
`password`.
This is made more obvious when you use the `filter` method.
When we use this filter: `shadow.filter(min_days: 20, max_days: 30)` we
are matching fields in the shadow file and not using our matcher
methods. This means that if there is a discrepancy between our matcher
methods, and the shadow fields the user could end up confused. Like I did =)
This PR changes:
Changed matchers to match shadow fields.
Updated documentation to reflect changes.
Updated tests to reflect changes.
Re-add `filter` method, and add a test for it.
Renamed variable for FilterTable to be less confusing.
Renamed query argument for methods to be consistent.
Cleanup docs based on comments from @jerryaldrichiii
Make Rubocop happy <3
Signed-off-by: Miah Johnson <miah@chia-pet.org>
Removes skip_resource and raise .. if InSpec.os stuff from initialize as this is covered by platform support.
Signed-off-by: Miah Johnson <miah@chia-pet.org>
* return 1 as exit code for commands that are not available
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* update tests
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* Change shadow resource to use FilterTable rather than custom filter
implementation.
Add tests for singluar aliased methods and other minor changes to work
with FilterTable output.
Coverage is at 100%
Signed-off-by: Miah Johnson <miah@chia-pet.org>
* merge master
Signed-off-by: Miah Johnson <miah@chia-pet.org>
* Add support to use bash in host resource
Netcat's presence is widely regarded as a security issue, and thus not
always available. This solution first tries to use bash builtins and
timeout (from coreutils), so is less likely to require installing
additional packages.
* Darwin UDP support in host resource
* Host: use netcat first if available
Signed-off-by: João Vale <jpvale@gmail.com>
* Fix aws-iam-users pagination
PROBLEM: aws-iam-users resource only retrieves 100 records due to pagination
in the AWS IAM list_users function.
FIX: Iterate over all the pages using the AWS pagination variables `marker`
and `is_truncated`
Signed-off-by: Richard Nixon <richard.nixon@btinternet.com>
* Move instance variable to avoid `NoMethodError`
Methods for `role` and `system` properties are dynamically generated and
return values from the `@virtualization_data` Mash. Therefor, we must
ensure `@virtualization_data` exists before calling these methods.
* Move supports logic to `supports platform: linux`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Initial commit of new resource
* Removes deprecated matcher in example
* Adds a new terraform file for config resources
* Fixes and clarifies documentation
* Wraps calls to api in catch_aws_errors method
* Changes the names of two matchers
Signed-off-by: Matthew Dromazos <dromazmj@dukes.jmu.edu>
* Fix formatting of iam user integration tests by placing them in controls
* Fix subnet AZ test by making it an attribute; can't hardcode it
* Fix VPC ID fixture export for subnet testing
* Rename Azure integration tasks to match AWS and allow on-demand attribute dump
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* package resource: Fix `brew` package detection
This allows for package detection via `brew` to handle cases where a
particular package formula exists but is not installed.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Fixes the deprecation warning text for report and output.
Remove an extra 'is being' from the 'is being is being'
Signed-off-by: Franklin Webber <franklin@chef.io>
* Fix legacy reporter output.
Signed-off-by: Jared Quick <jquick@chef.io>
* Wrap test in a proc to catch warnings.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add output deprecation.
Signed-off-by: Jared Quick <jquick@chef.io>
This does the following to `inspec detect`:
- Modifies it to use the `platform` resource
- Changes the output to mention Platform and show the family hierarchy
- Changes the JSON output by changing `family` to `families`
- Adds better error messaging (no more stacktraces!)
- Adds support for APIs such as AWS/Azure
- Hides Arch from API platforms (not applicable)
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Formatter and reporter refactor.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add exception and backtrace to json-min report.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add sha to json-min and include generator version for json profile.
Signed-off-by: Jared Quick <jquick@chef.io>
* Fix deprecated typo and add fallback for cli resource title.
Signed-off-by: Jared Quick <jquick@chef.io>
* Update to build json report and clean up cli logic.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add tests for json reporter.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add cli suppress_log_output? and a fallback for invalid reporter type.
Signed-off-by: Jared Quick <jquick@chef.io>
* Update suppress_log_output? to check if we are outputting to stdout.
Signed-off-by: Jared Quick <jquick@chef.io>
* Update reporter cli optoins to work with json_config.
Signed-off-by: Jared Quick <jquick@chef.io>
* Refactor some safe-navigation and variable names.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add thor banner to show reporter file output syntax.
Signed-off-by: Jared Quick <jquick@chef.io>
Unlike `Inspec::Test` this supports having multiple tests within one block that describes a resource. This has now been seen as an optimization problem where a resource may be computed once and tested multiple times with `it` and `its` within the body.
If successful, it requires a follow-up to deprecated Inspec::Test and remove it for 2.0 completely with a recommendation to use Inspec::Describe.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
This adds support for `architectures` to the `packages` resource.
Example:
```
describe packages(/compat-libstdc++-33/) do
its('architectures') { should include 'x86_64' }
its('architectures') { should include 'i686' }
end
```
This also adds documentation for the `packages` resource
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* adding df resource
Signed-off-by: Vern Burton <me@vernburton.com>
* adding unit tests and required mocks for them, created integration test
Signed-off-by: Vern Burton <me@vernburton.com>
* cleaning up skip test to include only the filename and not full path
Signed-off-by: Vern Burton <me@vernburton.com>
* adding docs
Signed-off-by: Vern Burton <me@vernburton.com>
* size makes more sense than space
Signed-off-by: Vern Burton <me@vernburton.com>
* removing unneeded author lines
Signed-off-by: Vern Burton <me@vernburton.com>
* as the command changed, changing mock to the new sha
Signed-off-by: Vern Burton <me@vernburton.com>
* updating to address comments from #2441
* removing author lines
* using attr_reader functions
* using ruby string functions rather than pipe to sed
* adding os family detection
* using ResourceFailed as the pattern already existed for OS family detection
* using if for future case support for unix and unix-like (FreeBSD)
Signed-off-by: Vern Burton <me@vernburton.com>
* adding supports to resource metadata, and adding tests that show that resource says that it is not supported on windows/unix.
Signed-off-by: Vern Burton <me@vernburton.com>
* focusing on linux os family and removing logic for assumed future cases
Signed-off-by: Vern Burton <me@vernburton.com>
* changing df to filesystem
Signed-off-by: Vern Burton <me@vernburton.com>
* service resource: Fix no `.service` + systemd bug
This modifies the `enabled?` check to fallback to `sysv_service` in the
event that a `.service` file cannot be found.
For example: On Debian 8.7 the stock apache2 package does not deploy a
`.service` file but deploys a SysV style service. This causes
`systemctl is-enabled` to fail when the service is in fact enabled.
* Remove `cmd_stderr` and clean up `cmd_exit_1`
* Clean up `stderr` assignment using ternary
This change adds the `docker_service` resource for Docker swarm mode services. This
branches off some of the common elements (id, exists) into a `DockerObject` module along
with a utility function for parsing the image/repo string. That function was implemented
separately by `docker_image` and `docker_container`, now with a third resource, it made
sense to consolidate that into an included module. I used the most comprehensive
implementation. Existing classes had to be slightly modified for the genericization.
Signed-off-by: Matt Kulka <mkulka@parchment.com>
