# Objective
- Part of #11590.
## Solution
- Fix `unsafe_op_in_unsafe_fn` for `bevy_dynamic_plugin`.
---
## Changelog
- Added further restrictions to the safety requirements of
`bevy_dynamic_plugin::dynamically_load_plugin`.
---
I had a few issues, specifically with the safety comment on
`dynamically_load_plugin`. There are three different unsafe functions
called within the function body, and they all need their own
justification / message.
Also, would it be unsound to call `dynamically_load_plugin` multiple
times on the same file? I feel the documentation needs to be more clear.
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
- [`thiserror`](https://docs.rs/thiserror/) is used to derive the error
type on `bevy_dynamic_plugin`'s
[`DynamicPluginLoadError`](https://docs.rs/bevy_dynamic_plugin/latest/bevy_dynamic_plugin/enum.DynamicPluginLoadError.html).
- It is an enum where each variant wraps a `libloading` error type.
- `thiserror` supports marking this internal error types as `#[source]`
so it can automatically fill out the
[`Error::source`](https://doc.rust-lang.org/std/error/trait.Error.html#method.source)
method.
- This allows other error handling libraries to get more information
about the error than what Bevy by default provides. It increases
interoperability between libraries.
## Solution
- Mark the internal `libloading::Error` of `DynamicPluginLoadError` with
`#[source]`.
---
## Changelog
- Implemented the
[`Error::source`](https://doc.rust-lang.org/std/error/trait.Error.html#method.source)
method for
[`DynamicPluginLoadError`](https://docs.rs/bevy_dynamic_plugin/latest/bevy_dynamic_plugin/enum.DynamicPluginLoadError.html).
---
Here is the output from `cargo-expand` before and after the change.
```rust
// Before
impl Error for DynamicPluginLoadError {}
```
```rust
// After
impl Error for DynamicPluginLoadError {
fn source(&self) -> Option<&(dyn Error + 'static)> {
use thiserror::__private::AsDynError as _;
match self {
DynamicPluginLoadError::Library { 0: source, .. } => {
Some(source.as_dyn_error())
}
DynamicPluginLoadError::Plugin { 0: source, .. } => {
Some(source.as_dyn_error())
}
}
}
}
```
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
CI-capable version of #9086
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
I created this manually as Github didn't want to run CI for the
workflow-generated PR. I'm guessing we didn't hit this in previous
releases because we used bors.
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Updates the requirements on
[libloading](https://github.com/nagisa/rust_libloading) to permit the
latest version.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="83b1037f21"><code>83b1037</code></a>
Release 0.8.0</li>
<li><a
href="a6a394a7ef"><code>a6a394a</code></a>
bump MSRV to 1.48</li>
<li><a
href="c7955a761e"><code>c7955a7</code></a>
Replace winapi with windows-sys</li>
<li><a
href="95d03a1ddf"><code>95d03a1</code></a>
Add support for QNX Neutrino</li>
<li><a
href="6e284984ae"><code>6e28498</code></a>
Fix CI</li>
<li><a
href="95a0f62e8f"><code>95a0f62</code></a>
Placate clippy</li>
<li><a
href="224a3def35"><code>224a3de</code></a>
Release 0.7.4</li>
<li><a
href="bd17713dcc"><code>bd17713</code></a>
Support AIX dyld constants</li>
<li><a
href="6e07929736"><code>6e07929</code></a>
fix typo</li>
<li><a
href="6b33651a90"><code>6b33651</code></a>
Construct a PathBuf</li>
<li>Additional commits viewable in <a
href="https://github.com/nagisa/rust_libloading/compare/0.7.0...0.8.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
The clippy lint `type_complexity` is known not to play well with bevy.
It frequently triggers when writing complex queries, and taking the
lint's advice of using a type alias almost always just obfuscates the
code with no benefit. Because of this, this lint is currently ignored in
CI, but unfortunately it still shows up when viewing bevy code in an
IDE.
As someone who's made a fair amount of pull requests to this repo, I
will say that this issue has been a consistent thorn in my side. Since
bevy code is filled with spurious, ignorable warnings, it can be very
difficult to spot the *real* warnings that must be fixed -- most of the
time I just ignore all warnings, only to later find out that one of them
was real after I'm done when CI runs.
## Solution
Suppress this lint in all bevy crates. This was previously attempted in
#7050, but the review process ended up making it more complicated than
it needs to be and landed on a subpar solution.
The discussion in https://github.com/rust-lang/rust-clippy/pull/10571
explores some better long-term solutions to this problem. Since there is
no timeline on when these solutions may land, we should resolve this
issue in the meantime by locally suppressing these lints.
### Unresolved issues
Currently, these lints are not suppressed in our examples, since that
would require suppressing the lint in every single source file. They are
still ignored in CI.
# Objective
- Fixes#6711
## Solution
- Change the `path` function parameter of `dynamically_load_plugin` and `DynamicPluginExt::load_plugin` to a generic with `AsRef<OsStr>` bound
# Objective
Currently, `bevy_dynamic_plugin` simply panics on error. This makes it impossible to handle failures in applications that use this feature.
For example, I'd like to build an optional expansion for my game, that may not be distributed to all users. I want to use `bevy_dynamic_plugin` for loading it. I want my game to try to load it on startup, but continue without it if it cannot be loaded.
## Solution
- Make the `dynamically_load_plugin` function return a `Result`, so it can gracefully return loading errors.
- Create an error enum type, to provide useful information about the kind of error. This adds `thiserror` to the dependencies of `bevy_dynamic_plugin`, but that dependency is already used in other parts of bevy (such as `bevy_asset`), so not a big deal.
I chose not to change the behavior of the builder method in the App extension trait. I kept it as panicking. There is no clean way (that I'm aware of) to make a builder-style API that has fallible methods. So it is either a panic or a warning. I feel the panic is more appropriate.
---
## Changelog
### Changed
- `bevy_dynamic_plugin::dynamically_load_plugin` now returns `Result` instead of panicking, to allow for error handling
Objective
During work on #3009 I've found that not all jobs use actions-rs, and therefore, an previous version of Rust is used for them. So while compilation and other stuff can pass, checking markup and Android build may fail with compilation errors.
Solution
This PR adds `action-rs` for any job running cargo, and updates the edition to 2021.
This is extracted out of eb8f973646476b4a4926ba644a77e2b3a5772159 and includes some additional changes to remove all references to AppBuilder and fix examples that still used App::build() instead of App::new(). In addition I didn't extract the sub app feature as it isn't ready yet.
You can use `git diff --diff-filter=M eb8f973646476b4a4926ba644a77e2b3a5772159` to find all differences in this PR. The `--diff-filtered=M` filters all files added in the original commit but not in this commit away.
Co-Authored-By: Carter Anderson <mcanders1@gmail.com>
This relicenses Bevy under the dual MIT or Apache-2.0 license. For rationale, see #2373.
* Changes the LICENSE file to describe the dual license. Moved the MIT license to docs/LICENSE-MIT. Added the Apache-2.0 license to docs/LICENSE-APACHE. I opted for this approach over dumping both license files at the root (the more common approach) for a number of reasons:
* Github links to the "first" license file (LICENSE-APACHE) in its license links (you can see this in the wgpu and rust-analyzer repos). People clicking these links might erroneously think that the apache license is the only option. Rust and Amethyst both use COPYRIGHT or COPYING files to solve this problem, but this creates more file noise (if you do everything at the root) and the naming feels way less intuitive.
* People have a reflex to look for a LICENSE file. By providing a single license file at the root, we make it easy for them to understand our licensing approach.
* I like keeping the root clean and noise free
* There is precedent for putting the apache and mit license text in sub folders (amethyst)
* Removed the `Copyright (c) 2020 Carter Anderson` copyright notice from the MIT license. I don't care about this attribution, it might make license compliance more difficult in some cases, and it didn't properly attribute other contributors. We shoudn't replace it with something like "Copyright (c) 2021 Bevy Contributors" because "Bevy Contributors" is not a legal entity. Instead, we just won't include the copyright line (which has precedent ... Rust also uses this approach).
* Updates crates to use the new "MIT OR Apache-2.0" license value
* Removes the old legion-transform license file from bevy_transform. bevy_transform has been its own, fully custom implementation for a long time and that license no longer applies.
* Added a License section to the main readme
* Updated our Bevy Plugin licensing guidelines.
As a follow-up we should update the website to properly describe the new license.
Closes#2373
