# Objective
- Finish the work done in #8942 .
## Solution
- Rebase the changes made in #8942 and fix the issues stopping it from
being merged earlier
---------
Co-authored-by: Thomas <1234328+thmsgntz@users.noreply.github.com>
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
forward for bevy user to consume
# Objective
- since winit 0.27 an event WindowOccluded will be produced:
https://docs.rs/winit/latest/winit/event/enum.WindowEvent.html#variant.Occluded
- on ios this is currently the only way to know if an app comes back
from the background which is an important time to to things (like
resetting the badge)
## Solution
- pick up the winit event and forward it to a new `EventWriter`
---
## Changelog
### Added
- new Event `WindowOccluded` added allowing to hook into
`WindowEvent::Occluded` of winit
# Objective
- Window size, scale and position are not correct on the first execution
of the systems
- Fixes#10407, fixes#10642
## Solution
- Don't run `update` before we get a chance to create the window in
winit
- Finish reverting #9826 after #10389
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
The way `bevy_app` works was changed unnecessarily in #9826 whose
changes should have been specific to `bevy_winit`.
I'm somewhat disappointed that happened and we can see in
https://github.com/bevyengine/bevy/pull/10195 that it made things more
complicated.
Even worse, in #10385 it's clear that this breaks the clean abstraction
over another engine someone built with Bevy!
Fixes#10385.
## Solution
- Move the changes made to `bevy_app` in #9826 to `bevy_winit`
- Revert the changes to `ScheduleRunnerPlugin` and the `run_once` runner
in #10195 as they're no longer necessary.
While this code is breaking relative to `0.12.0`, it reverts the
behavior of `bevy_app` back to how it was in `0.11`.
Due to the nature of the breakage relative to `0.11` I hope this will be
considered for `0.12.1`.
# Objective
- Fixes#10532
## Solution
I've updated the various `Event` send methods to return the sent
`EventId`(s). Since these methods previously returned nothing, and this
information is cheap to copy, there should be minimal negative
consequences to providing this additional information. In the case of
`send_batch`, an iterator is returned built from `Range` and `Map`,
which only consumes 16 bytes on the stack with no heap allocations for
all batch sizes. As such, the cost of this information is negligible.
These changes are reflected for `EventWriter` and `World`. For `World`,
the return types are optional to account for the possible lack of an
`Events` resource. Again, these methods previously returned no
information, so its inclusion should only be a benefit.
## Usage
Now when sending events, the IDs of those events is available for
immediate use:
```rust
// Example of a request-response system where the requester can track handled requests.
/// A system which can make and track requests
fn requester(
mut requests: EventWriter<Request>,
mut handled: EventReader<Handled>,
mut pending: Local<HashSet<EventId<Request>>>,
) {
// Check status of previous requests
for Handled(id) in handled.read() {
pending.remove(&id);
}
if !pending.is_empty() {
error!("Not all my requests were handled on the previous frame!");
pending.clear();
}
// Send a new request and remember its ID for later
let request_id = requests.send(Request::MyRequest { /* ... */ });
pending.insert(request_id);
}
/// A system which handles requests
fn responder(
mut requests: EventReader<Request>,
mut handled: EventWriter<Handled>,
) {
for (request, id) in requests.read_with_id() {
if handle(request).is_ok() {
handled.send(Handled(id));
}
}
}
```
In the above example, a `requester` system can send request events, and
keep track of which ones are currently pending by `EventId`. Then, a
`responder` system can act on that event, providing the ID as a
reference that the `requester` can use. Before this PR, it was not
trivial for a system sending events to keep track of events by ID. This
is unfortunate, since for a system reading events, it is trivial to
access the ID of a event.
---
## Changelog
- Updated `Events`:
- Added `send_batch`
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `EventWriter`
- Modified `send_batch` to return all sent `EventId`s
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `World`
- Modified `send_event` to return the sent `EventId` if sent, otherwise
`None`.
- Modified `send_event_default` to return the sent `EventId` if sent,
otherwise `None`.
- Modified `send_event_batch` to return all sent `EventId`s if sent,
otherwise `None`.
- Added unit test `test_send_events_ids` to ensure returned `EventId`s
match the sent `Event`s
- Updated uses of modified methods.
## Migration Guide
### `send` / `send_default` / `send_batch`
For the following methods:
- `Events::send`
- `Events::send_default`
- `Events::send_batch`
- `EventWriter::send`
- `EventWriter::send_default`
- `EventWriter::send_batch`
- `World::send_event`
- `World::send_event_default`
- `World::send_event_batch`
Ensure calls to these methods either handle the returned value, or
suppress the result with `;`.
```rust
// Now fails to compile due to mismatched return type
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default()
}
// Fix
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default();
}
```
This will most likely be noticed within `match` statements:
```rust
// Before
match is_pressed {
true => events.send(PlayerAction::Fire),
// ^--^ No longer returns ()
false => {}
}
// After
match is_pressed {
true => {
events.send(PlayerAction::Fire);
},
false => {}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Adopt #10239 to get it in time for the release
- Fix accessibility on macOS and linux
## Solution
- call `on_event` from AcccessKit adapter on winit events
---------
Co-authored-by: Nolan Darilek <nolan@thewordnerd.info>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Handle pausing audio when Android app is suspended
## Solution
- This is the start of application lifetime events. They are mostly
useful on mobile
- Next version of winit should add a few more
- When application is suspended, send an event to notify the
application, and run the schedule one last time before actually
suspending the app
- Audio is now suspended too 🎉https://github.com/bevyengine/bevy/assets/8672791/d74e2e09-ee29-4f40-adf2-36a0c064f94e
---------
Co-authored-by: Marco Buono <418473+coreh@users.noreply.github.com>
# Objective
- After #9826, there are issues on "run once runners"
- example `without_winit` crashes:
```
2023-10-19T22:06:01.810019Z INFO bevy_render::renderer: AdapterInfo { name: "llvmpipe (LLVM 15.0.7, 256 bits)", vendor: 65541, device: 0, device_type: Cpu, driver: "llvmpipe", driver_info: "Mesa 23.2.1 - kisak-mesa PPA (LLVM 15.0.7)", backend: Vulkan }
2023-10-19T22:06:02.860331Z WARN bevy_audio::audio_output: No audio device found.
2023-10-19T22:06:03.215154Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Linux 22.04 Ubuntu", kernel: "6.2.0-1014-azure", cpu: "Intel(R) Xeon(R) CPU E5-2673 v3 @ 2.40GHz", core_count: "2", memory: "6.8 GiB" }
thread 'main' panicked at crates/bevy_render/src/pipelined_rendering.rs:91:14:
Unable to get RenderApp. Another plugin may have removed the RenderApp before PipelinedRenderingPlugin
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
- example `headless` runs the app twice with the `run_once` schedule
## Solution
- Expose a more complex state of an app than just "ready"
- Also block adding plugins to an app after it has finished or cleaned
up its plugins as that wouldn't work anyway
## Migration Guide
* `app.ready()` has been replaced by `app.plugins_state()` which will
return more details on the current state of plugins in the app
# Objective
This PR addresses the issue where Bevy displays one or several black
frames before the scene is first rendered. This is particularly
noticeable on iOS, where the black frames disrupt the transition from
the launch screen to the game UI. I have written about my search to
solve this issue on the Bevy discord:
https://discord.com/channels/691052431525675048/1151047604520632352
While I can attest this PR works on both iOS and Linux/Wayland (and even
seems to resolve a slight flicker during startup with the latter as
well), I'm not familiar enough with Bevy to judge the full implications
of these changes. I hope a reviewer or tester can help me confirm
whether this is the right approach, or what might be a cleaner solution
to resolve this issue.
## Solution
I have moved the "startup phase" as well as the plugin finalization into
the `app.run()` function so those things finish synchronously before the
"main schedule" starts. I even move one frame forward as well, using
`app.update()`, to make sure the rendering has caught up with the state
of the finalized plugins as well.
I admit that part of this was achieved through trial-and-error, since
not doing the "startup phase" *before* `app.finish()` resulted in
panics, while not calling an extra `app.update()` didn't fully resolve
the issue.
What I *can* say, is that the iOS launch screen animation works in such
a way that the OS initiates the transition once the framework's
[`didFinishLaunching()`](https://developer.apple.com/documentation/uikit/uiapplicationdelegate/1622921-application)
returns, meaning app developers **must** finish setting up their UI
before that function returns. This is what basically led me on the path
to try to "finish stuff earlier" :)
## Changelog
### Changed
- The startup phase and the first frame are rendered synchronously when
calling `app.run()`, before the "main schedule" is started. This fixes
black frames during the iOS launch transition and possible flickering on
other platforms, but may affect initialization order in your
application.
## Migration Guide
Because of this change, the timing of the first few frames might have
changed, and I think it could be that some things one may expect to be
initialized in a system may no longer be. To be honest, I feel out of my
depth to judge the exact impact here.
# Objective
Allow Bevy apps to run without requiring to start from the main thread.
This allows other projects and applications to do things like spawning a
normal or scoped
thread and run Bevy applications there.
The current behaviour if you try this is a panic.
## Solution
Allow this by default on platforms winit supports this behaviour on
(x11, Wayland, Windows).
---
## Changelog
### Added
- Added the ability to start Bevy apps outside of the main thread on
x11, Wayland, Windows
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Updates for rust 1.73
## Solution
- new doc check for `redundant_explicit_links`
- updated to text for compile fail tests
---
## Changelog
- updates for rust 1.73
# Objective
- Handle suspend / resume events on Android without exiting
## Solution
- On suspend: despawn the window, and set the control flow to wait for
events from the OS
- On resume: spawn a new window, and set the control flow to poll
In this video, you can see the Android example being suspended, stopping
receiving events, and working again after being resumed
https://github.com/bevyengine/bevy/assets/8672791/aaaf4b09-ee6a-4a0d-87ad-41f05def7945
# Objective
Improve compatibility with macOS Sonoma and Xcode 15.0.
## Solution
- Adds the workaround by @ptxmac to ignore the invalid window sizes
provided by `winit` on macOS 14.0
- This still provides a slightly wrong content size when resizing (it
fails to account for the window title bar, so some content gets clipped
at the bottom) but it's _much better_ than crashing.
- Adds docs on how to work around the `bindgen` bug on Xcode 15.0.
## Related Issues:
- https://github.com/RustAudio/coreaudio-sys/issues/85
- https://github.com/rust-windowing/winit/issues/2876
---
## Changelog
- Added a workaround for a `winit`-related crash under macOS Sonoma
(14.0)
---------
Co-authored-by: Peter Kristensen <peter@ptx.dk>
# Objective
- https://github.com/bevyengine/bevy/pull/7609 broke Android support
```
8721 8770 I event crates/bevy_winit/src/system.rs:55: Creating new window "App" (0v0)
8721 8769 I RustStdoutStderr: thread '<unnamed>' panicked at 'Cannot get the native window, it's null and will always be null before Event::Resumed and after Event::Suspended. Make sure you only call this function between those events.', winit-0.28.6/src/platform_impl/android/mod.rs:1058:13
```
## Solution
- Don't create windows on `StartCause::Init` as it's too early
# Objective
I've been collecting some mistakes in the documentation and fixed them
---------
Co-authored-by: Emi <emanuel.boehm@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- The current `EventReader::iter` has been determined to cause confusion
among new Bevy users. It was suggested by @JoJoJet to rename the method
to better clarify its usage.
- Solves #9624
## Solution
- Rename `EventReader::iter` to `EventReader::read`.
- Rename `EventReader::iter_with_id` to `EventReader::read_with_id`.
- Rename `ManualEventReader::iter` to `ManualEventReader::read`.
- Rename `ManualEventReader::iter_with_id` to
`ManualEventReader::read_with_id`.
---
## Changelog
- `EventReader::iter` has been renamed to `EventReader::read`.
- `EventReader::iter_with_id` has been renamed to
`EventReader::read_with_id`.
- `ManualEventReader::iter` has been renamed to
`ManualEventReader::read`.
- `ManualEventReader::iter_with_id` has been renamed to
`ManualEventReader::read_with_id`.
- Deprecated `EventReader::iter`
- Deprecated `EventReader::iter_with_id`
- Deprecated `ManualEventReader::iter`
- Deprecated `ManualEventReader::iter_with_id`
## Migration Guide
- Existing usages of `EventReader::iter` and `EventReader::iter_with_id`
will have to be changed to `EventReader::read` and
`EventReader::read_with_id` respectively.
- Existing usages of `ManualEventReader::iter` and
`ManualEventReader::iter_with_id` will have to be changed to
`ManualEventReader::read` and `ManualEventReader::read_with_id`
respectively.
# Objective
[Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is
now stable.
# Notes
- `let-else` formatting has arrived!
- I chose to allow `explicit_iter_loop` due to
https://github.com/rust-lang/rust-clippy/issues/11074.
We didn't hit any of the false positives that prevent compilation, but
fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for
image in &mut *image_events {`.
Happy to undo this if there's consensus the other way.
---------
Co-authored-by: François <mockersf@gmail.com>
Redo of #7590 since I messed up my branch.
# Objective
- Revise docs.
- Refactor event loop code a little bit to make it easier to follow.
## Solution
- Do the above.
---
### Migration Guide
- `UpdateMode::Reactive { max_wait: .. }` -> `UpdateMode::Reactive {
wait: .. }`
- `UpdateMode::ReactiveLowPower { max_wait: .. }` ->
`UpdateMode::ReactiveLowPower { wait: .. }`
---------
Co-authored-by: Sélène Amanita <134181069+Selene-Amanita@users.noreply.github.com>
# Objective
I'm creating an iOS game and had to find a way to persist game state
when the application is terminated. This required listening to the
[`applicationWillTerminate()`
method](https://developer.apple.com/documentation/uikit/uiapplicationdelegate/1623111-applicationwillterminate),
but I cannot do so myself anymore since `winit` already set up a
delegate to listen for it, and there can be only one delegate.
So I had to move up the stack and try to respond to one of the events
from `winit` instead. It appears `winit` fires two events that could
serve my purpose: `WindowEvent::Destroyed` and `Event::LoopDestroyed`.
It seemed to me the former might be slightly more generally useful, and
I also found a past discussion that suggested it would be appropriate
for Bevy to have a `WindowDestroyed` event:
https://github.com/bevyengine/bevy/pull/5589#discussion_r942811021
## Solution
- I've added the `WindowDestroyed` event, which fires when `winit` fires
`WindowEvent::Destroyed`.
---
## Changelog
### Added
- Introduced a new `WindowDestroyed` event type. It is used to indicate
a window has been destroyed by the windowing system.
# Objective
- Better consistency with `add_systems`.
- Deprecating `add_plugin` in favor of a more powerful `add_plugins`.
- Allow passing `Plugin` to `add_plugins`.
- Allow passing tuples to `add_plugins`.
## Solution
- `App::add_plugins` now takes an `impl Plugins` parameter.
- `App::add_plugin` is deprecated.
- `Plugins` is a new sealed trait that is only implemented for `Plugin`,
`PluginGroup` and tuples over `Plugins`.
- All examples, benchmarks and tests are changed to use `add_plugins`,
using tuples where appropriate.
---
## Changelog
### Changed
- `App::add_plugins` now accepts all types that implement `Plugins`,
which is implemented for:
- Types that implement `Plugin`.
- Types that implement `PluginGroup`.
- Tuples (up to 16 elements) over types that implement `Plugins`.
- Deprecated `App::add_plugin` in favor of `App::add_plugins`.
## Migration Guide
- Replace `app.add_plugin(plugin)` calls with `app.add_plugins(plugin)`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Document android code that is currently causing clippy warnings due to
not being documented
## Solution
- Document the two previously undocumented items
# Objective
The goal of this PR is to receive touchpad magnification and rotation
events.
## Solution
Implement pendants for winit's `TouchpadMagnify` and `TouchpadRotate`
events.
Adjust the `mouse_input_events.rs` example to debug magnify and rotate
events.
Since winit only reports these events on macOS, the Bevy events for
touchpad magnification and rotation are currently only fired on macOS.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/8586.
## Solution
- Add `preferred_theme` field to `Window` and set it when window
creation
- Add `window_theme` field to `InternalWindowState` to store current
window theme
- Expose winit `WindowThemeChanged` event
---------
Co-authored-by: hate <15314665+hate@users.noreply.github.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Support WebGPU
- alternative to #5027 that doesn't need any async / await
- fixes#8315
- Surprise fix#7318
## Solution
### For async renderer initialisation
- Update the plugin lifecycle:
- app builds the plugin
- calls `plugin.build`
- registers the plugin
- app starts the event loop
- event loop waits for `ready` of all registered plugins in the same
order
- returns `true` by default
- then call all `finish` then all `cleanup` in the same order as
registered
- then execute the schedule
In the case of the renderer, to avoid anything async:
- building the renderer plugin creates a detached task that will send
back the initialised renderer through a mutex in a resource
- `ready` will wait for the renderer to be present in the resource
- `finish` will take that renderer and place it in the expected
resources by other plugins
- other plugins (that expect the renderer to be available) `finish` are
called and they are able to set up their pipelines
- `cleanup` is called, only custom one is still for pipeline rendering
### For WebGPU support
- update the `build-wasm-example` script to support passing `--api
webgpu` that will build the example with WebGPU support
- feature for webgl2 was always enabled when building for wasm. it's now
in the default feature list and enabled on all platforms, so check for
this feature must also check that the target_arch is `wasm32`
---
## Migration Guide
- `Plugin::setup` has been renamed `Plugin::cleanup`
- `Plugin::finish` has been added, and plugins adding pipelines should
do it in this function instead of `Plugin::build`
```rust
// Before
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.insert_resource::<MyResource>
.add_systems(Update, my_system);
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<RenderResourceNeedingDevice>()
.init_resource::<OtherRenderResource>();
}
}
// After
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.insert_resource::<MyResource>
.add_systems(Update, my_system);
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<OtherRenderResource>();
}
fn finish(&self, app: &mut App) {
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<RenderResourceNeedingDevice>();
}
}
```
Links in the api docs are nice. I noticed that there were several places
where structs / functions and other things were referenced in the docs,
but weren't linked. I added the links where possible / logical.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
The clippy lint `type_complexity` is known not to play well with bevy.
It frequently triggers when writing complex queries, and taking the
lint's advice of using a type alias almost always just obfuscates the
code with no benefit. Because of this, this lint is currently ignored in
CI, but unfortunately it still shows up when viewing bevy code in an
IDE.
As someone who's made a fair amount of pull requests to this repo, I
will say that this issue has been a consistent thorn in my side. Since
bevy code is filled with spurious, ignorable warnings, it can be very
difficult to spot the *real* warnings that must be fixed -- most of the
time I just ignore all warnings, only to later find out that one of them
was real after I'm done when CI runs.
## Solution
Suppress this lint in all bevy crates. This was previously attempted in
#7050, but the review process ended up making it more complicated than
it needs to be and landed on a subpar solution.
The discussion in https://github.com/rust-lang/rust-clippy/pull/10571
explores some better long-term solutions to this problem. Since there is
no timeline on when these solutions may land, we should resolve this
issue in the meantime by locally suppressing these lints.
### Unresolved issues
Currently, these lints are not suppressed in our examples, since that
would require suppressing the lint in every single source file. They are
still ignored in CI.
# Objective
Make the coordinate systems of screen-space items (cursor position, UI,
viewports, etc.) consistent.
## Solution
Remove the weird double inversion of the cursor position's Y origin.
Once in bevy_winit to the bottom and then again in bevy_ui back to the
top.
This leaves the origin at the top left like it is in every other popular
app framework.
Update the `world_to_viewport`, `viewport_to_world`, and
`viewport_to_world_2d` methods to flip the Y origin (as they should
since the viewport coordinates were always relative to the top left).
## Migration Guide
`Window::cursor_position` now returns the position of the cursor
relative to the top left instead of the bottom left.
This now matches other screen-space coordinates like
`RelativeCursorPosition`, UI, and viewports.
The `world_to_viewport`, `viewport_to_world`, and `viewport_to_world_2d`
methods on `Camera` now return/take the viewport position relative to
the top left instead of the bottom left.
If you were using `world_to_viewport` to position a UI node the returned
`y` value should now be passed into the `top` field on `Style` instead
of the `bottom` field.
Note that this might shift the position of the UI node as it is now
anchored at the top.
If you were passing `Window::cursor_position` to `viewport_to_world` or
`viewport_to_world_2d` no change is necessary.
# Objective
In the
[`Text`](3442a13d2c/crates/bevy_text/src/text.rs (L18))
struct the field is named: `linebreak_behaviour`, the British spelling
of _behavior_.
**Update**, also found:
- `FileDragAndDrop::HoveredFileCancelled`
- `TouchPhase::Cancelled`
- `Touches.just_cancelled`
The majority of all spelling is in the US but when you have a lot of
contributors across the world, sometimes
spelling differences can pop up in APIs such as in this case.
For consistency, I think it would be worth a while to ensure that the
API is persistent.
Some examples:
`from_reflect.rs` has `DefaultBehavior`
TextStyle has `color` and uses the `Color` struct.
In `bevy_input/src/Touch.rs` `TouchPhase::Cancelled` and _canceled_ are
used interchangeably in the documentation
I've found that there is also the same type of discrepancies in the
documentation, though this is a low priority but is worth checking.
**Update**: I've now checked the documentation (See #8291)
## Solution
I've only renamed the inconsistencies that have breaking changes and
documentation pertaining to them. The rest of the documentation will be
changed via #8291.
Do note that the winit API is written with UK spelling, thus this may be
a cause for confusion:
`winit::event::TouchPhase::Cancelled => TouchPhase::Canceled`
`winit::event::WindowEvent::HoveredFileCancelled` -> Related to
`FileDragAndDrop::HoveredFileCanceled`
But I'm hoping to maybe outline other spelling inconsistencies in the
API, and maybe an addition to the contribution guide.
---
## Changelog
- `Text` field `linebreak_behaviour` has been renamed to
`linebreak_behavior`.
- Event `FileDragAndDrop::HoveredFileCancelled` has been renamed to
`HoveredFileCanceled`
- Function `Touches.just_cancelled` has been renamed to
`Touches.just_canceled`
- Event `TouchPhase::Cancelled` has been renamed to
`TouchPhase::Canceled`
## Migration Guide
Update where `linebreak_behaviour` is used to `linebreak_behavior`
Updated the event `FileDragAndDrop::HoveredFileCancelled` where used to
`HoveredFileCanceled`
Update `Touches.just_cancelled` where used as `Touches.just_canceled`
The event `TouchPhase::Cancelled` is now called `TouchPhase::Canceled`
# Objective
Documentation should no longer be using pre-stageless terminology to
avoid confusion.
## Solution
- update all docs referring to stages to instead refer to sets/schedules
where appropriate
- also mention `apply_system_buffers` for anything system-buffer-related
that previously referred to buffers being applied "at the end of a
stage"
# Objective
UIs created for Bevy cannot currently be made accessible. This PR aims to address that.
## Solution
Integrate AccessKit as a dependency, adding accessibility support to existing bevy_ui widgets.
## Changelog
### Added
* Integrate with and expose [AccessKit](https://accesskit.dev) for platform accessibility.
* Add `Label` for marking text specifically as a label for UI controls.
# Objective
- Fixes#7612
- Since #7493, windows started as unfocused
## Solution
- Creating the window at the end of the event loop after the resume event instead of at the beginning of the loop of the next event fixes the focus
# Objective
Fix#7377Fix#7513
## Solution
Record the changes made to the Bevy `Window` from `winit` as 'canon' to avoid Bevy sending those changes back to `winit` again, causing a feedback loop.
## Changelog
* Removed `ModifiesWindows` system label.
Neither `despawn_window` nor `changed_window` actually modify the `Window` component so all the `.after(ModifiesWindows)` shouldn't be necessary.
* Moved `changed_window` and `despawn_window` systems to `CoreStage::Last` to avoid systems making changes to the `Window` between `changed_window` and the end of the frame as they would be ignored.
## Migration Guide
The `ModifiesWindows` system label was removed.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Merge the examples on iOS and Android
- Make sure they both work from the same code
## Solution
- don't create window when not in an active state (from #6830)
- exit on suspend on Android (from #6830)
- automatically enable dependency feature of bevy_audio on android so that it works out of the box
- don't inverse y position of touch events
- reuse the same example for both Android and iOS
Fixes#4616Fixes#4103Fixes#3648Fixes#3458Fixes#3249Fixes#86
# Objective
NOTE: This depends on #7267 and should not be merged until #7267 is merged. If you are reviewing this before that is merged, I highly recommend viewing the Base Sets commit instead of trying to find my changes amongst those from #7267.
"Default sets" as described by the [Stageless RFC](https://github.com/bevyengine/rfcs/pull/45) have some [unfortunate consequences](https://github.com/bevyengine/bevy/discussions/7365).
## Solution
This adds "base sets" as a variant of `SystemSet`:
A set is a "base set" if `SystemSet::is_base` returns `true`. Typically this will be opted-in to using the `SystemSet` derive:
```rust
#[derive(SystemSet, Clone, Hash, Debug, PartialEq, Eq)]
#[system_set(base)]
enum MyBaseSet {
A,
B,
}
```
**Base sets are exclusive**: a system can belong to at most one "base set". Adding a system to more than one will result in an error. When possible we fail immediately during system-config-time with a nice file + line number. For the more nested graph-ey cases, this will fail at the final schedule build.
**Base sets cannot belong to other sets**: this is where the word "base" comes from
Systems and Sets can only be added to base sets using `in_base_set`. Calling `in_set` with a base set will fail. As will calling `in_base_set` with a normal set.
```rust
app.add_system(foo.in_base_set(MyBaseSet::A))
// X must be a normal set ... base sets cannot be added to base sets
.configure_set(X.in_base_set(MyBaseSet::A))
```
Base sets can still be configured like normal sets:
```rust
app.add_system(MyBaseSet::B.after(MyBaseSet::Ap))
```
The primary use case for base sets is enabling a "default base set":
```rust
schedule.set_default_base_set(CoreSet::Update)
// this will belong to CoreSet::Update by default
.add_system(foo)
// this will override the default base set with PostUpdate
.add_system(bar.in_base_set(CoreSet::PostUpdate))
```
This allows us to build apis that work by default in the standard Bevy style. This is a rough analog to the "default stage" model, but it use the new "stageless sets" model instead, with all of the ordering flexibility (including exclusive systems) that it provides.
---
## Changelog
- Added "base sets" and ported CoreSet to use them.
## Migration Guide
TODO
Huge thanks to @maniwani, @devil-ira, @hymm, @cart, @superdump and @jakobhellermann for the help with this PR.
# Objective
- Followup #6587.
- Minimal integration for the Stageless Scheduling RFC: https://github.com/bevyengine/rfcs/pull/45
## Solution
- [x] Remove old scheduling module
- [x] Migrate new methods to no longer use extension methods
- [x] Fix compiler errors
- [x] Fix benchmarks
- [x] Fix examples
- [x] Fix docs
- [x] Fix tests
## Changelog
### Added
- a large number of methods on `App` to work with schedules ergonomically
- the `CoreSchedule` enum
- `App::add_extract_system` via the `RenderingAppExtension` trait extension method
- the private `prepare_view_uniforms` system now has a public system set for scheduling purposes, called `ViewSet::PrepareUniforms`
### Removed
- stages, and all code that mentions stages
- states have been dramatically simplified, and no longer use a stack
- `RunCriteriaLabel`
- `AsSystemLabel` trait
- `on_hierarchy_reports_enabled` run criteria (now just uses an ad hoc resource checking run condition)
- systems in `RenderSet/Stage::Extract` no longer warn when they do not read data from the main world
- `RunCriteriaLabel`
- `transform_propagate_system_set`: this was a nonstandard pattern that didn't actually provide enough control. The systems are already `pub`: the docs have been updated to ensure that the third-party usage is clear.
### Changed
- `System::default_labels` is now `System::default_system_sets`.
- `App::add_default_labels` is now `App::add_default_sets`
- `CoreStage` and `StartupStage` enums are now `CoreSet` and `StartupSet`
- `App::add_system_set` was renamed to `App::add_systems`
- The `StartupSchedule` label is now defined as part of the `CoreSchedules` enum
- `.label(SystemLabel)` is now referred to as `.in_set(SystemSet)`
- `SystemLabel` trait was replaced by `SystemSet`
- `SystemTypeIdLabel<T>` was replaced by `SystemSetType<T>`
- The `ReportHierarchyIssue` resource now has a public constructor (`new`), and implements `PartialEq`
- Fixed time steps now use a schedule (`CoreSchedule::FixedTimeStep`) rather than a run criteria.
- Adding rendering extraction systems now panics rather than silently failing if no subapp with the `RenderApp` label is found.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied.
- `SceneSpawnerSystem` now runs under `CoreSet::Update`, rather than `CoreStage::PreUpdate.at_end()`.
- `bevy_pbr::add_clusters` is no longer an exclusive system
- the top level `bevy_ecs::schedule` module was replaced with `bevy_ecs::scheduling`
- `tick_global_task_pools_on_main_thread` is no longer run as an exclusive system. Instead, it has been replaced by `tick_global_task_pools`, which uses a `NonSend` resource to force running on the main thread.
## Migration Guide
- Calls to `.label(MyLabel)` should be replaced with `.in_set(MySet)`
- Stages have been removed. Replace these with system sets, and then add command flushes using the `apply_system_buffers` exclusive system where needed.
- The `CoreStage`, `StartupStage, `RenderStage` and `AssetStage` enums have been replaced with `CoreSet`, `StartupSet, `RenderSet` and `AssetSet`. The same scheduling guarantees have been preserved.
- Systems are no longer added to `CoreSet::Update` by default. Add systems manually if this behavior is needed, although you should consider adding your game logic systems to `CoreSchedule::FixedTimestep` instead for more reliable framerate-independent behavior.
- Similarly, startup systems are no longer part of `StartupSet::Startup` by default. In most cases, this won't matter to you.
- For example, `add_system_to_stage(CoreStage::PostUpdate, my_system)` should be replaced with
- `add_system(my_system.in_set(CoreSet::PostUpdate)`
- When testing systems or otherwise running them in a headless fashion, simply construct and run a schedule using `Schedule::new()` and `World::run_schedule` rather than constructing stages
- Run criteria have been renamed to run conditions. These can now be combined with each other and with states.
- Looping run criteria and state stacks have been removed. Use an exclusive system that runs a schedule if you need this level of control over system control flow.
- For app-level control flow over which schedules get run when (such as for rollback networking), create your own schedule and insert it under the `CoreSchedule::Outer` label.
- Fixed timesteps are now evaluated in a schedule, rather than controlled via run criteria. The `run_fixed_timestep` system runs this schedule between `CoreSet::First` and `CoreSet::PreUpdate` by default.
- Command flush points introduced by `AssetStage` have been removed. If you were relying on these, add them back manually.
- Adding extract systems is now typically done directly on the main app. Make sure the `RenderingAppExtension` trait is in scope, then call `app.add_extract_system(my_system)`.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied. You may need to order your movement systems to occur before this system in order to avoid system order ambiguities in culling behavior.
- the `RenderLabel` `AppLabel` was renamed to `RenderApp` for clarity
- `App::add_state` now takes 0 arguments: the starting state is set based on the `Default` impl.
- Instead of creating `SystemSet` containers for systems that run in stages, simply use `.on_enter::<State::Variant>()` or its `on_exit` or `on_update` siblings.
- `SystemLabel` derives should be replaced with `SystemSet`. You will also need to add the `Debug`, `PartialEq`, `Eq`, and `Hash` traits to satisfy the new trait bounds.
- `with_run_criteria` has been renamed to `run_if`. Run criteria have been renamed to run conditions for clarity, and should now simply return a bool.
- States have been dramatically simplified: there is no longer a "state stack". To queue a transition to the next state, call `NextState::set`
## TODO
- [x] remove dead methods on App and World
- [x] add `App::add_system_to_schedule` and `App::add_systems_to_schedule`
- [x] avoid adding the default system set at inappropriate times
- [x] remove any accidental cycles in the default plugins schedule
- [x] migrate benchmarks
- [x] expose explicit labels for the built-in command flush points
- [x] migrate engine code
- [x] remove all mentions of stages from the docs
- [x] verify docs for States
- [x] fix uses of exclusive systems that use .end / .at_start / .before_commands
- [x] migrate RenderStage and AssetStage
- [x] migrate examples
- [x] ensure that transform propagation is exported in a sufficiently public way (the systems are already pub)
- [x] ensure that on_enter schedules are run at least once before the main app
- [x] re-enable opt-in to execution order ambiguities
- [x] revert change to `update_bounds` to ensure it runs in `PostUpdate`
- [x] test all examples
- [x] unbreak directional lights
- [x] unbreak shadows (see 3d_scene, 3d_shape, lighting, transparaency_3d examples)
- [x] game menu example shows loading screen and menu simultaneously
- [x] display settings menu is a blank screen
- [x] `without_winit` example panics
- [x] ensure all tests pass
- [x] SubApp doc test fails
- [x] runs_spawn_local tasks fails
- [x] [Fix panic_when_hierachy_cycle test hanging](https://github.com/alice-i-cecile/bevy/pull/120)
## Points of Difficulty and Controversy
**Reviewers, please give feedback on these and look closely**
1. Default sets, from the RFC, have been removed. These added a tremendous amount of implicit complexity and result in hard to debug scheduling errors. They're going to be tackled in the form of "base sets" by @cart in a followup.
2. The outer schedule controls which schedule is run when `App::update` is called.
3. I implemented `Label for `Box<dyn Label>` for our label types. This enables us to store schedule labels in concrete form, and then later run them. I ran into the same set of problems when working with one-shot systems. We've previously investigated this pattern in depth, and it does not appear to lead to extra indirection with nested boxes.
4. `SubApp::update` simply runs the default schedule once. This sucks, but this whole API is incomplete and this was the minimal changeset.
5. `time_system` and `tick_global_task_pools_on_main_thread` no longer use exclusive systems to attempt to force scheduling order
6. Implemetnation strategy for fixed timesteps
7. `AssetStage` was migrated to `AssetSet` without reintroducing command flush points. These did not appear to be used, and it's nice to remove these bottlenecks.
8. Migration of `bevy_render/lib.rs` and pipelined rendering. The logic here is unusually tricky, as we have complex scheduling requirements.
## Future Work (ideally before 0.10)
- Rename schedule_v3 module to schedule or scheduling
- Add a derive macro to states, and likely a `EnumIter` trait of some form
- Figure out what exactly to do with the "systems added should basically work by default" problem
- Improve ergonomics for working with fixed timesteps and states
- Polish FixedTime API to match Time
- Rebase and merge #7415
- Resolve all internal ambiguities (blocked on better tools, especially #7442)
- Add "base sets" to replace the removed default sets.
# Objective
- Update winit to 0.28
## Solution
- Small API change
- A security advisory has been added for a unmaintained crate used by a dependency of winit build script for wayland
I didn't do anything for Android support in this PR though it should be fixable, it should be done in a separate one, maybe https://github.com/bevyengine/bevy/pull/6830
---
## Changelog
- `window.always_on_top` has been removed, you can now use `window.window_level`
## Migration Guide
before:
```rust
app.new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
always_on_top: true,
..default()
}),
..default()
}));
```
after:
```rust
app.new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
window_level: bevy:🪟:WindowLevel::AlwaysOnTop,
..default()
}),
..default()
}));
```
# Objective
- Bevy should not have any "internal" execution order ambiguities. These clutter the output of user-facing error reporting, and can result in nasty, nondetermistic, very difficult to solve bugs.
- Verifying this currently involves repeated non-trivial manual work.
## Solution
- [x] add an example to quickly check this
- ~~[ ] ensure that this example panics if there are any unresolved ambiguities~~
- ~~[ ] run the example in CI 😈~~
There's one tricky ambiguity left, between UI and animation. I don't have the tools to fix this without system set configuration, so the remaining work is going to be left to #7267 or another PR after that.
```
2023-01-27T18:38:42.989405Z INFO bevy_ecs::schedule::ambiguity_detection: Execution order ambiguities detected, you might want to add an explicit dependency relation between some of these systems:
* Parallel systems:
-- "bevy_animation::animation_player" and "bevy_ui::flex::flex_node_system"
conflicts: ["bevy_transform::components::transform::Transform"]
```
## Changelog
Resolved internal execution order ambiguities for:
1. Transform propagation (ignored, we need smarter filter checking).
2. Gamepad processing (fixed).
3. bevy_winit's window handling (fixed).
4. Cascaded shadow maps and perspectives (fixed).
Also fixed a desynchronized state bug that could occur when the `Window` component is removed and then added to the same entity in a single frame.
# Objective
- Fix#7315
- Add IME support
## Solution
- Add two new fields to `Window`, to control if IME is enabled and the candidate box position
This allows the use of dead keys which are needed in French, or the full IME experience to type using Pinyin
I also added a basic general text input example that can handle IME input.
https://user-images.githubusercontent.com/8672791/213941353-5ed73a73-5dd1-4e66-a7d6-a69b49694c52.mp4
# Objective
- Fixes#7294
## Solution
- Do not trigger change detection when setting the cursor position from winit
When moving the cursor continuously, Winit sends events:
- CursorMoved(0)
- CursorMoved(1)
- => start of Bevy schedule execution
- CursorMoved(2)
- CursorMoved(3)
- <= End of Bevy schedule execution
if Bevy schedule runs after the event 1, events 2 and 3 would happen during the execution but would be read only on the next system run. During the execution, the system would detect a change on cursor position, and send back an order to winit to move it back to 1, so event 2 and 3 would be ignored. By bypassing change detection when setting the cursor from winit event, it doesn't trigger sending back that change to winit out of order.
# Objective
- Fixes#7288
- Do not expose access directly to cursor position as it is the physical position, ignoring scale
## Solution
- Make cursor position private
- Expose getter/setter on the window to have access to the scale
