Fixes https://github.com/bevyengine/bevy/issues/10974
# Objective
Duplicate the ordering logic of the `Main` schedule into the `FixedMain`
schedule.
---
## Changelog
- `FixedUpdate` is no longer the main schedule ran in
`RunFixedUpdateLoop`, `FixedMain` has replaced this and has a similar
structure to `Main`.
## Migration Guide
- Usage of `RunFixedUpdateLoop` should be renamed to `RunFixedMainLoop`.
# Objective
Fixes#10968
## Solution
Pull startup schedules from a list of `ScheduleLabel`s in the same way
the update schedules are handled.
---
## Changelog
- Added `MainScheduleOrder::startup_labels` to allow the editing of the
startup schedule order.
## Migration Guide
- Added a new field to `MainScheduleOrder`, `startup_labels`, for
editing the startup schedule order.
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
## Objective
Currently, events are dropped after two frames. This cadence wasn't
*chosen* for a specific reason, double buffering just lets events
persist for at least two frames. Events only need to be dropped at a
predictable point so that the event queues don't grow forever (i.e.
events should never cause a memory leak).
Events (and especially input events) need to be observable by systems in
`FixedUpdate`, but as-is events are dropped before those systems even
get a chance to see them.
## Solution
Instead of unconditionally dropping events in `First`, require
`FixedUpdate` to first queue the buffer swap (if the `TimePlugin` has
been installed). This way, events are only dropped after a frame that
runs `FixedUpdate`.
## Future Work
In the same way we have independent copies of `Time` for tracking time
in `Main` and `FixedUpdate`, we will need independent copies of `Input`
for tracking press/release status correctly in `Main` and `FixedUpdate`.
--
Every run of `FixedUpdate` covers a specific timespan. For example, if
the fixed timestep `Δt` is 10ms, the first three `FixedUpdate` runs
cover `[0ms, 10ms)`, `[10ms, 20ms)`, and `[20ms, 30ms)`.
`FixedUpdate` can run many times in one frame. For truly
framerate-independent behavior, each `FixedUpdate` should only see the
events that occurred in its covered timespan, but what happens right now
is the first step in the frame reads all pending events.
Fixing that will require timestamped events.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
I incorrectly assumed that moving a system from `Update` to
`FixedUpdate` would simplify logic without hurting performance.
But this is not the case: if there's single-threaded long computation in
the `FixedUpdate`, the machine won't do anything else in parallel with
it. Which might be not what users expect.
So this PR adds a note. But maybe it is obvious, I don't know.
# Objective
- Standardize fmt for toml files
## Solution
- Add [taplo](https://taplo.tamasfe.dev/) to CI (check for fmt and diff
for toml files), for context taplo is used by the most popular extension
in VScode [Even Better
TOML](https://marketplace.visualstudio.com/items?itemName=tamasfe.even-better-toml
- Add contribution section to explain toml fmt with taplo.
Now to pass CI you need to run `taplo fmt --option indent_string=" "` or
if you use vscode have the `Even Better TOML` extension with 4 spaces
for indent
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
Bevy introduced unintentional breaking behaviour along with the v0.12.0
release regarding the `App::set_runner` API. See: #10385, #10389 for
details. We weren't able to catch this before release because this API
is only used internally in one or two places (the very places which
motivated the break).
This commit adds a regression test to help guarantee some expected
behaviour for custom runners, namely that `app::update` won't be called
before the runner has a chance to initialise state.
# Objective
The way `bevy_app` works was changed unnecessarily in #9826 whose
changes should have been specific to `bevy_winit`.
I'm somewhat disappointed that happened and we can see in
https://github.com/bevyengine/bevy/pull/10195 that it made things more
complicated.
Even worse, in #10385 it's clear that this breaks the clean abstraction
over another engine someone built with Bevy!
Fixes#10385.
## Solution
- Move the changes made to `bevy_app` in #9826 to `bevy_winit`
- Revert the changes to `ScheduleRunnerPlugin` and the `run_once` runner
in #10195 as they're no longer necessary.
While this code is breaking relative to `0.12.0`, it reverts the
behavior of `bevy_app` back to how it was in `0.11`.
Due to the nature of the breakage relative to `0.11` I hope this will be
considered for `0.12.1`.
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Align all error-like types to implement `Error`.
Fixes #10176
## Solution
- Derive `Error` on more types
- Refactor instances of manual implementations that could be derived
This adds thiserror as a dependency to bevy_transform, which might
increase compilation time -- but I don't know of any situation where you
might only use that but not any other crate that pulls in bevy_utils.
The `contributors` example has a `LoadContributorsError` type, but as
it's an example I have not updated it. Doing that would mean either
having a `use bevy_internal::utils::thiserror::Error;` in an example
file, or adding `thiserror` as a dev-dependency to the main `bevy`
crate.
---
## Changelog
- All `…Error` types now implement the `Error` trait
# Objective
First of all, this PR took heavy inspiration from #7760 and #5715. It
intends to also fix#5569, but with a slightly different approach.
This also fixes#9335 by reexporting `DynEq`.
## Solution
The advantage of this API is that we can intern a value without
allocating for zero-sized-types and for enum variants that have no
fields. This PR does this automatically in the `SystemSet` and
`ScheduleLabel` derive macros for unit structs and fieldless enum
variants. So this should cover many internal and external use cases of
`SystemSet` and `ScheduleLabel`. In these optimal use cases, no memory
will be allocated.
- The interning returns a `Interned<dyn SystemSet>`, which is just a
wrapper around a `&'static dyn SystemSet`.
- `Hash` and `Eq` are implemented in terms of the pointer value of the
reference, similar to my first approach of anonymous system sets in
#7676.
- Therefore, `Interned<T>` does not implement `Borrow<T>`, only `Deref`.
- The debug output of `Interned<T>` is the same as the interned value.
Edit:
- `AppLabel` is now also interned and the old
`derive_label`/`define_label` macros were replaced with the new
interning implementation.
- Anonymous set ids are reused for different `Schedule`s, reducing the
amount of leaked memory.
### Pros
- `InternedSystemSet` and `InternedScheduleLabel` behave very similar to
the current `BoxedSystemSet` and `BoxedScheduleLabel`, but can be copied
without an allocation.
- Many use cases don't allocate at all.
- Very fast lookups and comparisons when using `InternedSystemSet` and
`InternedScheduleLabel`.
- The `intern` module might be usable in other areas.
- `Interned{ScheduleLabel, SystemSet, AppLabel}` does implement
`{ScheduleLabel, SystemSet, AppLabel}`, increasing ergonomics.
### Cons
- Implementors of `SystemSet` and `ScheduleLabel` still need to
implement `Hash` and `Eq` (and `Clone`) for it to work.
## Changelog
### Added
- Added `intern` module to `bevy_utils`.
- Added reexports of `DynEq` to `bevy_ecs` and `bevy_app`.
### Changed
- Replaced `BoxedSystemSet` and `BoxedScheduleLabel` with
`InternedSystemSet` and `InternedScheduleLabel`.
- Replaced `impl AsRef<dyn ScheduleLabel>` with `impl ScheduleLabel`.
- Replaced `AppLabelId` with `InternedAppLabel`.
- Changed `AppLabel` to use `Debug` for error messages.
- Changed `AppLabel` to use interning.
- Changed `define_label`/`derive_label` to use interning.
- Replaced `define_boxed_label`/`derive_boxed_label` with
`define_label`/`derive_label`.
- Changed anonymous set ids to be only unique inside a schedule, not
globally.
- Made interned label types implement their label trait.
### Removed
- Removed `define_boxed_label` and `derive_boxed_label`.
## Migration guide
- Replace `BoxedScheduleLabel` and `Box<dyn ScheduleLabel>` with
`InternedScheduleLabel` or `Interned<dyn ScheduleLabel>`.
- Replace `BoxedSystemSet` and `Box<dyn SystemSet>` with
`InternedSystemSet` or `Interned<dyn SystemSet>`.
- Replace `AppLabelId` with `InternedAppLabel` or `Interned<dyn
AppLabel>`.
- Types manually implementing `ScheduleLabel`, `AppLabel` or `SystemSet`
need to implement:
- `dyn_hash` directly instead of implementing `DynHash`
- `as_dyn_eq`
- Pass labels to `World::try_schedule_scope`, `World::schedule_scope`,
`World::try_run_schedule`. `World::run_schedule`, `Schedules::remove`,
`Schedules::remove_entry`, `Schedules::contains`, `Schedules::get` and
`Schedules::get_mut` by value instead of by reference.
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- After #9826, there are issues on "run once runners"
- example `without_winit` crashes:
```
2023-10-19T22:06:01.810019Z INFO bevy_render::renderer: AdapterInfo { name: "llvmpipe (LLVM 15.0.7, 256 bits)", vendor: 65541, device: 0, device_type: Cpu, driver: "llvmpipe", driver_info: "Mesa 23.2.1 - kisak-mesa PPA (LLVM 15.0.7)", backend: Vulkan }
2023-10-19T22:06:02.860331Z WARN bevy_audio::audio_output: No audio device found.
2023-10-19T22:06:03.215154Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Linux 22.04 Ubuntu", kernel: "6.2.0-1014-azure", cpu: "Intel(R) Xeon(R) CPU E5-2673 v3 @ 2.40GHz", core_count: "2", memory: "6.8 GiB" }
thread 'main' panicked at crates/bevy_render/src/pipelined_rendering.rs:91:14:
Unable to get RenderApp. Another plugin may have removed the RenderApp before PipelinedRenderingPlugin
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
- example `headless` runs the app twice with the `run_once` schedule
## Solution
- Expose a more complex state of an app than just "ready"
- Also block adding plugins to an app after it has finished or cleaned
up its plugins as that wouldn't work anyway
## Migration Guide
* `app.ready()` has been replaced by `app.plugins_state()` which will
return more details on the current state of plugins in the app
# Objective
This PR addresses the issue where Bevy displays one or several black
frames before the scene is first rendered. This is particularly
noticeable on iOS, where the black frames disrupt the transition from
the launch screen to the game UI. I have written about my search to
solve this issue on the Bevy discord:
https://discord.com/channels/691052431525675048/1151047604520632352
While I can attest this PR works on both iOS and Linux/Wayland (and even
seems to resolve a slight flicker during startup with the latter as
well), I'm not familiar enough with Bevy to judge the full implications
of these changes. I hope a reviewer or tester can help me confirm
whether this is the right approach, or what might be a cleaner solution
to resolve this issue.
## Solution
I have moved the "startup phase" as well as the plugin finalization into
the `app.run()` function so those things finish synchronously before the
"main schedule" starts. I even move one frame forward as well, using
`app.update()`, to make sure the rendering has caught up with the state
of the finalized plugins as well.
I admit that part of this was achieved through trial-and-error, since
not doing the "startup phase" *before* `app.finish()` resulted in
panics, while not calling an extra `app.update()` didn't fully resolve
the issue.
What I *can* say, is that the iOS launch screen animation works in such
a way that the OS initiates the transition once the framework's
[`didFinishLaunching()`](https://developer.apple.com/documentation/uikit/uiapplicationdelegate/1622921-application)
returns, meaning app developers **must** finish setting up their UI
before that function returns. This is what basically led me on the path
to try to "finish stuff earlier" :)
## Changelog
### Changed
- The startup phase and the first frame are rendered synchronously when
calling `app.run()`, before the "main schedule" is started. This fixes
black frames during the iOS launch transition and possible flickering on
other platforms, but may affect initialization order in your
application.
## Migration Guide
Because of this change, the timing of the first few frames might have
changed, and I think it could be that some things one may expect to be
initialized in a system may no longer be. To be honest, I feel out of my
depth to judge the exact impact here.
# Objective
- Followup to #7184.
- ~Deprecate `TypeUuid` and remove its internal references.~ No longer
part of this PR.
- Use `TypePath` for the type registry, and (de)serialisation instead of
`std::any::type_name`.
- Allow accessing type path information behind proxies.
## Solution
- Introduce methods on `TypeInfo` and friends for dynamically querying
type path. These methods supersede the old `type_name` methods.
- Remove `Reflect::type_name` in favor of `DynamicTypePath::type_path`
and `TypeInfo::type_path_table`.
- Switch all uses of `std::any::type_name` in reflection, non-debugging
contexts to use `TypePath`.
---
## Changelog
- Added `TypePathTable` for dynamically accessing methods on `TypePath`
through `TypeInfo` and the type registry.
- Removed `type_name` from all `TypeInfo`-like structs.
- Added `type_path` and `type_path_table` methods to all `TypeInfo`-like
structs.
- Removed `Reflect::type_name` in favor of
`DynamicTypePath::reflect_type_path` and `TypeInfo::type_path`.
- Changed the signature of all `DynamicTypePath` methods to return
strings with a static lifetime.
## Migration Guide
- Rely on `TypePath` instead of `std::any::type_name` for all stability
guarantees and for use in all reflection contexts, this is used through
with one of the following APIs:
- `TypePath::type_path` if you have a concrete type and not a value.
- `DynamicTypePath::reflect_type_path` if you have an `dyn Reflect`
value without a concrete type.
- `TypeInfo::type_path` for use through the registry or if you want to
work with the represented type of a `DynamicFoo`.
- Remove `type_name` from manual `Reflect` implementations.
- Use `type_path` and `type_path_table` in place of `type_name` on
`TypeInfo`-like structs.
- Use `get_with_type_path(_mut)` over `get_with_type_name(_mut)`.
## Note to reviewers
I think if anything we were a little overzealous in merging #7184 and we
should take that extra care here.
In my mind, this is the "point of no return" for `TypePath` and while I
think we all agree on the design, we should carefully consider if the
finer details and current implementations are actually how we want them
moving forward.
For example [this incorrect `TypePath` implementation for
`String`](3fea3c6c0b/crates/bevy_reflect/src/impls/std.rs (L90))
(note that `String` is in the default Rust prelude) snuck in completely
under the radar.
# Objective
- Updates for rust 1.73
## Solution
- new doc check for `redundant_explicit_links`
- updated to text for compile fail tests
---
## Changelog
- updates for rust 1.73
# Objective
- Fixes#9884
- Add API for ignoring ambiguities on certain resource or components.
## Solution
- Add a `IgnoreSchedulingAmbiguitiy` resource to the world which holds
the `ComponentIds` to be ignored
- Filter out ambiguities with those component id's.
## Changelog
- add `allow_ambiguous_component` and `allow_ambiguous_resource` apis
for ignoring ambiguities
---------
Co-authored-by: Ryan Johnson <ryanj00a@gmail.com>
# Objective
Scheduling low cost systems has significant overhead due to task pool
contention and the extra machinery to schedule and run them. Event
update systems are the prime example of a low cost system, requiring a
guaranteed O(1) operation, and there are a *lot* of them.
## Solution
Add a run condition to every event system so they only run when there is
an event in either of it's two internal Vecs.
---
## Changelog
Changed: Event update systems will not run if there are no events to
process.
## Migration Guide
`Events<T>::update_system` has been split off from the the type and can
be found at `bevy_ecs::event::event_update_system`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
Replace instances of
```rust
for x in collection.iter{_mut}() {
```
with
```rust
for x in &{mut} collection {
```
This also changes CI to no longer suppress this lint. Note that since
this lint only shows up when using clippy in pedantic mode, it was
probably unnecessary to suppress this lint in the first place.
# Objective
- Fixes#9244.
## Solution
- Changed the `(Into)SystemSetConfigs` traits and structs be more like
the `(Into)SystemConfigs` traits and structs.
- Replaced uses of `IntoSystemSetConfig` with `IntoSystemSetConfigs`
- Added generic `ItemConfig` and `ItemConfigs` types.
- Changed `SystemConfig(s)` and `SystemSetConfig(s)` to be type aliases
to `ItemConfig(s)`.
- Added generic `process_configs` to `ScheduleGraph`.
- Changed `configure_sets_inner` and `add_systems_inner` to reuse
`process_configs`.
---
## Changelog
- Added `run_if` to `IntoSystemSetConfigs`
- Deprecated `Schedule::configure_set` and `App::configure_set`
- Removed `IntoSystemSetConfig`
## Migration Guide
- Use `App::configure_sets` instead of `App::configure_set`
- Use `Schedule::configure_sets` instead of `Schedule::configure_set`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- The current `EventReader::iter` has been determined to cause confusion
among new Bevy users. It was suggested by @JoJoJet to rename the method
to better clarify its usage.
- Solves #9624
## Solution
- Rename `EventReader::iter` to `EventReader::read`.
- Rename `EventReader::iter_with_id` to `EventReader::read_with_id`.
- Rename `ManualEventReader::iter` to `ManualEventReader::read`.
- Rename `ManualEventReader::iter_with_id` to
`ManualEventReader::read_with_id`.
---
## Changelog
- `EventReader::iter` has been renamed to `EventReader::read`.
- `EventReader::iter_with_id` has been renamed to
`EventReader::read_with_id`.
- `ManualEventReader::iter` has been renamed to
`ManualEventReader::read`.
- `ManualEventReader::iter_with_id` has been renamed to
`ManualEventReader::read_with_id`.
- Deprecated `EventReader::iter`
- Deprecated `EventReader::iter_with_id`
- Deprecated `ManualEventReader::iter`
- Deprecated `ManualEventReader::iter_with_id`
## Migration Guide
- Existing usages of `EventReader::iter` and `EventReader::iter_with_id`
will have to be changed to `EventReader::read` and
`EventReader::read_with_id` respectively.
- Existing usages of `ManualEventReader::iter` and
`ManualEventReader::iter_with_id` will have to be changed to
`ManualEventReader::read` and `ManualEventReader::read_with_id`
respectively.
# Objective
- Move schedule name into `Schedule` to allow the schedule name to be
used for errors and tracing in Schedule methods
- Fixes#9510
## Solution
- Move label onto `Schedule` and adjust api's on `World` and `Schedule`
to not pass explicit label where it makes sense to.
- add name to errors and tracing.
- `Schedule::new` now takes a label so either add the label or use
`Schedule::default` which uses a default label. `default` is mostly used
in doc examples and tests.
---
## Changelog
- move label onto `Schedule` to improve error message and logging for
schedules.
## Migration Guide
`Schedule::new` and `App::add_schedule`
```rust
// old
let schedule = Schedule::new();
app.add_schedule(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
app.add_schedule(schedule);
```
if you aren't using a label and are using the schedule struct directly
you can use the default constructor.
```rust
// old
let schedule = Schedule::new();
schedule.run(world);
// new
let schedule = Schedule::default();
schedule.run(world);
```
`Schedules:insert`
```rust
// old
let schedule = Schedule::new();
schedules.insert(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
schedules.insert(schedule);
```
`World::add_schedule`
```rust
// old
let schedule = Schedule::new();
world.add_schedule(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
world.add_schedule(schedule);
```
# Objective
- Fixes: #9508
- Fixes: #9526
## Solution
- Adds
```rust
fn configure_schedules(&mut self, schedule_build_settings: ScheduleBuildSettings)
```
to `Schedules`, and `App` to simplify applying `ScheduleBuildSettings`
to all schedules.
---
## Migration Guide
- No breaking changes.
- Adds `Schedule::get_build_settings()` getter for the schedule's
`ScheduleBuildSettings`.
- Can replaced manual configuration of all schedules:
```rust
// Old
for (_, schedule) in app.world.resource_mut::<Schedules>().iter_mut() {
schedule.set_build_settings(build_settings);
}
// New
app.configure_schedules(build_settings);
```
# Objective
- have errors in configure_set and configure_sets show the line number
of the user calling location rather than pointing to schedule.rs
- use display formatting for the errors
## Example Error Text
```text
// dependency loop
// before
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: DependencyLoop("A")', crates\bevy_ecs\src\schedule\schedule.rs:682:39
// after
thread 'main' panicked at 'System set `A` depends on itself.', examples/stress_tests/bevymark.rs:16:9
// hierarchy loop
// before
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: HierarchyLoop("A")', crates\bevy_ecs\src\schedule\schedule.rs:682:3
// after
thread 'main' panicked at 'System set `A` contains itself.', examples/stress_tests/bevymark.rs:16:9
// configuring a system type set
// before
thread 'main' panicked at 'configuring system type sets is not allowed', crates\bevy_ecs\src\schedule\config.rs:394:9
//after
thread 'main' panicked at 'configuring system type sets is not allowed', examples/stress_tests/bevymark.rs:16:9
```
Code to produce errors:
```rust
use bevy::prelude::*;
#[derive(SystemSet, Clone, Debug, PartialEq, Eq, Hash)]
enum TestSet {
A,
}
fn main() {
fn foo() {}
let mut app = App::empty();
// Hierarchy Loop
app.configure_set(Main, TestSet::A.in_set(TestSet::A));
// Dependency Loop
app.configure_set(Main, TestSet::A.after(TestSet::A));
// Configure System Type Set
app.configure_set(Main, foo.into_system_set());
}
```
# Objective
Fixes#9420
## Solution
Remove one of the two `AppExit` event checks in the
`ScheduleRunnerPlugin`'s main loop. Specificially, the check that
happens immediately before calling `App.update()`, to be consistent with
the `WinitPlugin`.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/9250
## Changelog
- Move scene spawner systems to a new SpawnScene schedule which is after
Update and before PostUpdate (schedule order:
[PreUpdate][Update][SpawnScene][PostUpdate])
## Migration Guide
- Move scene spawner systems to a new SpawnScene schedule which is after
Update and before PostUpdate (schedule order:
[PreUpdate][Update][SpawnScene][PostUpdate]), you might remove system
ordering code related to scene spawning as the execution order has been
guaranteed by bevy engine.
---------
Co-authored-by: Hennadii Chernyshchyk <genaloner@gmail.com>
# Objective
Currently the panic message if a duplicate plugin is added isn't really
helpful or at least can be made more useful if it includes the location
where the plugin was added a second time.
## Solution
Add `track_caller` to `add_plugins` and it's called dependencies.
CI-capable version of #9086
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fix typos throughout the project.
## Solution
[`typos`](https://github.com/crate-ci/typos) project was used for
scanning, but no automatic corrections were applied. I checked
everything by hand before fixing.
Most of the changes are documentation/comments corrections. Also, there
are few trivial changes to code (variable name, pub(crate) function name
and a few error/panic messages).
## Unsolved
`bevy_reflect_derive` has
[typo](1b51053f19/crates/bevy_reflect/bevy_reflect_derive/src/type_path.rs (L76))
in enum variant name that I didn't fix. Enum is `pub(crate)`, so there
shouldn't be any trouble if fixed. However, code is tightly coupled with
macro usage, so I decided to leave it for more experienced contributor
just in case.
I created this manually as Github didn't want to run CI for the
workflow-generated PR. I'm guessing we didn't hit this in previous
releases because we used bors.
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
This pull request is mutually exclusive with #9066.
# Objective
Complete the initialization of the plugin in `ScheduleRunnerPlugin`.
## Solution
Wait for asynchronous tasks to complete, then `App::finish` and
`App::cleanup` in the runner function.
# Objective
Relax unnecessary type restrictions on `App.runner` function.
## Solution
Changed the type of `App.runner` from `Fn(App)` to `FnOnce(App)`.
# Objective
Currently `App::edit_schedule` takes in `impl FnMut(&mut Schedule)`, but
it calls the function only once. It is probably the intention has been
to have it take `FnOnce` instead.
## Solution
- Relax the parameter to take `FnOnce` instead of `FnMut`
# Objective
- Better consistency with `add_systems`.
- Deprecating `add_plugin` in favor of a more powerful `add_plugins`.
- Allow passing `Plugin` to `add_plugins`.
- Allow passing tuples to `add_plugins`.
## Solution
- `App::add_plugins` now takes an `impl Plugins` parameter.
- `App::add_plugin` is deprecated.
- `Plugins` is a new sealed trait that is only implemented for `Plugin`,
`PluginGroup` and tuples over `Plugins`.
- All examples, benchmarks and tests are changed to use `add_plugins`,
using tuples where appropriate.
---
## Changelog
### Changed
- `App::add_plugins` now accepts all types that implement `Plugins`,
which is implemented for:
- Types that implement `Plugin`.
- Types that implement `PluginGroup`.
- Tuples (up to 16 elements) over types that implement `Plugins`.
- Deprecated `App::add_plugin` in favor of `App::add_plugins`.
## Migration Guide
- Replace `app.add_plugin(plugin)` calls with `app.add_plugins(plugin)`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Use `AppTypeRegistry` on API defined in `bevy_ecs`
(https://github.com/bevyengine/bevy/pull/8895#discussion_r1234748418)
A lot of the API on `Reflect` depends on a registry. When it comes to
the ECS. We should use `AppTypeRegistry` in the general case.
This is however impossible in `bevy_ecs`, since `AppTypeRegistry` is
defined in `bevy_app`.
## Solution
- Move `AppTypeRegistry` resource definition from `bevy_app` to
`bevy_ecs`
- Still add the resource in the `App` plugin, since bevy_ecs itself
doesn't know of plugins
Note that `bevy_ecs` is a dependency of `bevy_app`, so nothing
revolutionary happens.
## Alternative
- Define the API as a trait in `bevy_app` over `bevy_ecs`. (though this
prevents us from using bevy_ecs internals)
- Do not rely on `AppTypeRegistry` for the API in question, requring
users to extract themselves the resource and pass it to the API methods.
---
## Changelog
- Moved `AppTypeRegistry` resource definition from `bevy_app` to
`bevy_ecs`
## Migration Guide
- If you were **not** using a `prelude::*` to import `AppTypeRegistry`,
you should update your imports:
```diff
- use bevy::app::AppTypeRegistry;
+ use bevy::ecs::reflect::AppTypeRegistry
```
# Objective
The `extract` function is given the main app world, and the subapp, not
vice versa as the comment would lead us to believe.
## Solution
Fix the doc.
# Objective
Be consistent with `Resource`s and `Components` and have `Event` types
be more self-documenting.
Although not susceptible to accidentally using a function instead of a
value due to `Event`s only being initialized by their type, much of the
same reasoning for removing the blanket impl on `Resource` also applies
here.
* Not immediately obvious if a type is intended to be an event
* Prevent invisible conflicts if the same third-party or primitive types
are used as events
* Allows for further extensions (e.g. opt-in warning for missed events)
## Solution
Remove the blanket impl for the `Event` trait. Add a derive macro for
it.
---
## Changelog
- `Event` is no longer implemented for all applicable types. Add the
`#[derive(Event)]` macro for events.
## Migration Guide
* Add the `#[derive(Event)]` macro for events. Third-party types used as
events should be wrapped in a newtype.
# Objective
- Fix#8658
- `without_winit` example panics `thread 'Compute Task Pool (2)'
panicked at 'called `Option::unwrap()` on a `None` value',
crates/bevy_render/src/pipelined_rendering.rs:134:84`
## Solution
- In the default runner method `run_once`, correctly finish the
initialisation of the plugins. `run_once` can't be called twice so it's
ok to do it there
# Objective
Fix warnings:
```rs
warning: variable does not need to be mutable
--> /bevy/crates/bevy_app/src/plugin_group.rs:147:13
|
147 | let mut plugin_entry = self
| ----^^^^^^^^^^^^
| |
| help: remove this `mut`
|
= note: `#[warn(unused_mut)]` on by default
warning: variable does not need to be mutable
--> /bevy/crates/bevy_app/src/plugin_group.rs:161:13
|
161 | let mut plugin_entry = self
| ----^^^^^^^^^^^^
| |
| help: remove this `mut`
warning: `bevy_app` (lib) generated 2 warnings (run `cargo fix --lib -p bevy_app` to apply 2 suggestions)
warning: variable does not need to be mutable
--> /bevy/crates/bevy_render/src/view/window.rs:126:13
|
126 | ... let mut extracted_window = extracted_windows.entry(entity).or_insert(Extracte...
| ----^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_mut)]` on by default
warning: `bevy_render` (lib) generated 1 warning (run `cargo fix --lib -p bevy_render` to apply 1 suggestion)
```
## Solution
- Remove the mut keyword in those variables.
# Objective
`ScheduleRunnerPlugin` was still configured via a resource, meaning
users would be able to change the settings while the app is running, but
the changes wouldn't have an effect.
## Solution
Configure plugin directly
---
## Changelog
- Changed: merged `ScheduleRunnerSettings` into `ScheduleRunnerPlugin`
## Migration Guide
- instead of inserting the `ScheduleRunnerSettings` resource, configure
the `ScheduleRunnerPlugin`
# Objective
- Support WebGPU
- alternative to #5027 that doesn't need any async / await
- fixes#8315
- Surprise fix#7318
## Solution
### For async renderer initialisation
- Update the plugin lifecycle:
- app builds the plugin
- calls `plugin.build`
- registers the plugin
- app starts the event loop
- event loop waits for `ready` of all registered plugins in the same
order
- returns `true` by default
- then call all `finish` then all `cleanup` in the same order as
registered
- then execute the schedule
In the case of the renderer, to avoid anything async:
- building the renderer plugin creates a detached task that will send
back the initialised renderer through a mutex in a resource
- `ready` will wait for the renderer to be present in the resource
- `finish` will take that renderer and place it in the expected
resources by other plugins
- other plugins (that expect the renderer to be available) `finish` are
called and they are able to set up their pipelines
- `cleanup` is called, only custom one is still for pipeline rendering
### For WebGPU support
- update the `build-wasm-example` script to support passing `--api
webgpu` that will build the example with WebGPU support
- feature for webgl2 was always enabled when building for wasm. it's now
in the default feature list and enabled on all platforms, so check for
this feature must also check that the target_arch is `wasm32`
---
## Migration Guide
- `Plugin::setup` has been renamed `Plugin::cleanup`
- `Plugin::finish` has been added, and plugins adding pipelines should
do it in this function instead of `Plugin::build`
```rust
// Before
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.insert_resource::<MyResource>
.add_systems(Update, my_system);
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<RenderResourceNeedingDevice>()
.init_resource::<OtherRenderResource>();
}
}
// After
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.insert_resource::<MyResource>
.add_systems(Update, my_system);
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<OtherRenderResource>();
}
fn finish(&self, app: &mut App) {
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<RenderResourceNeedingDevice>();
}
}
```
