# Objective
The method `UnsafeWorldCell::world_mut` is a special case, since its
safety contract is more difficult to satisfy than the other methods on
`UnsafeWorldCell`. Rewrite its documentation to be specific about when
it can and cannot be used. Provide examples and emphasize that it is
unsound to call in most cases.
# Objective
The method `UnsafeWorldCell::read_change_tick` is longer than it needs
to be. `World` only has a method called this because it has two methods
for getting a change tick: one that takes `&self` and one that takes
`&mut self`. Since this distinction is not applicable to
`UnsafeWorldCell`, we should just call this method `change_tick`.
## Solution
Deprecate the current method and add a new one called `change_tick`.
---
## Changelog
- Renamed `UnsafeWorldCell::read_change_tick` to `change_tick`.
## Migration Guide
The `UnsafeWorldCell` method `read_change_tick` has been renamed to
`change_tick`.
# Objective
Fixes#8528
## Solution
Manually implement `PartialEq`, `Eq`, `PartialOrd`, `Ord`, and `Hash`
for `bevy_ecs::event::EventId`. These new implementations do not rely on
the `Event` implementing the same traits allowing `EventId` to be used
in more cases.
# Objective
After fixing dynamic scene to only map specific entities, we want
map_entities to default to the less error prone behavior and have the
previous behavior renamed to "map_all_entities." As this is a breaking
change, it could not be pushed out with the bug fix.
## Solution
Simple rename and refactor.
## Changelog
### Changed
- `map_entities` now accepts a list of entities to apply to, with
`map_all_entities` retaining previous behavior of applying to all
entities in the map.
## Migration Guide
- In `bevy_ecs`, `ReflectMapEntities::map_entites` now requires an
additional `entities` parameter to specify which entities it applies to.
To keep the old behavior, use the new
`ReflectMapEntities::map_all_entities`, but consider if passing the
entities in specifically might be better for your use case to avoid
bugs.
# Objective
- Handle dangling entity references inside scenes
- Handle references to entities with generation > 0 inside scenes
- Fix a latent bug in `Parent`'s `MapEntities` implementation, which
would, if the parent was outside the scene, cause the scene to be loaded
into the new world with a parent reference potentially pointing to some
random entity in that new world.
- Fixes#4793 and addresses #7235
## Solution
- DynamicScenes now identify entities with a `Entity` instead of a u32,
therefore including generation
- `World` exposes a new `reserve_generations` function that despawns an
entity and advances its generation by some extra amount.
- `MapEntities` implementations have a new `get_or_reserve` function
available that will always return an `Entity`, establishing a new
mapping to a dead entity when the entity they are called with is not in
the `EntityMap`. Subsequent calls with that same `Entity` will return
the same newly created dead entity reference, preserving equality
semantics.
- As a result, after loading a scene containing references to dead
entities (or entities otherwise outside the scene), those references
will all point to different generations on a single entity id in the new
world.
---
## Changelog
### Changed
- In serialized scenes, entities are now identified by a u64 instead of
a u32.
- In serialized scenes, components with entity references now have those
references serialize as u64s instead of structs.
### Fixed
- Scenes containing components with entity references will now
deserialize and add to a world reliably.
## Migration Guide
- `MapEntities` implementations must change from a `&EntityMap`
parameter to a `&mut EntityMapper` parameter and can no longer return a
`Result`. Finally, they should switch from calling `EntityMap::get` to
calling `EntityMapper::get_or_reserve`.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
Links in the api docs are nice. I noticed that there were several places
where structs / functions and other things were referenced in the docs,
but weren't linked. I added the links where possible / logical.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Methods for interacting with world schedules currently have two
variants: one that takes `impl ScheduleLabel` and one that takes `&dyn
ScheduleLabel`. Operations such as `run_schedule` or `schedule_scope`
only use the label by reference, so there is little reason to have an
owned variant of these functions.
## Solution
Decrease maintenance burden by merging the `ref` variants of these
functions with the owned variants.
---
## Changelog
- Deprecated `World::run_schedule_ref`. It is now redundant, since
`World::run_schedule` can take values by reference.
## Migration Guide
The method `World::run_schedule_ref` has been deprecated, and will be
removed in the next version of Bevy. Use `run_schedule` instead.
# Objective
Label traits such as `ScheduleLabel` currently have a major footgun: the
trait is implemented for `Box<dyn ScheduleLabel>`, but the
implementation does not function as one would expect since `Box<T>` is
considered to be a distinct type from `T`. This is because the behavior
of the `ScheduleLabel` trait is specified mainly through blanket
implementations, which prevents `Box<dyn ScheduleLabel>` from being
properly special-cased.
## Solution
Replace the blanket-implemented behavior with a series of methods
defined on `ScheduleLabel`. This allows us to fully special-case
`Box<dyn ScheduleLabel>` .
---
## Changelog
Fixed a bug where boxed label types (such as `Box<dyn ScheduleLabel>`)
behaved incorrectly when compared with concretely-typed labels.
## Migration Guide
The `ScheduleLabel` trait has been refactored to no longer depend on the
traits `std::any::Any`, `bevy_utils::DynEq`, and `bevy_utils::DynHash`.
Any manual implementations will need to implement new trait methods in
their stead.
```rust
impl ScheduleLabel for MyType {
// Before:
fn dyn_clone(&self) -> Box<dyn ScheduleLabel> { ... }
// After:
fn dyn_clone(&self) -> Box<dyn ScheduleLabel> { ... }
fn as_dyn_eq(&self) -> &dyn DynEq {
self
}
// No, `mut state: &mut` is not a typo.
fn dyn_hash(&self, mut state: &mut dyn Hasher) {
self.hash(&mut state);
// Hashing the TypeId isn't strictly necessary, but it prevents collisions.
TypeId::of::<Self>().hash(&mut state);
}
}
```
Added helper extracted from #7711. that PR contains some controversy
conditions, but this one should be good to go.
---
## Changelog
### Added
- `any_component_removed` condition.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Follow-up to #8377.
As the system module has been refactored, there are many types that no
longer make sense to live in the files that they do:
- The `IntoSystem` trait is in `function_system.rs`, even though this
trait is relevant to all kinds of systems. Same for the `In<T>` type.
- `PipeSystem` is now just an implementation of `CombinatorSystem`, so
`system_piping.rs` no longer needs its own file.
## Solution
- Move `IntoSystem`, `In<T>`, and system piping combinators & tests into
the top-level `mod.rs` file for `bevy_ecs::system`.
- Move `PipeSystem` into `combinator.rs`.
# Objective
- Currently, it is not possible to call `.pipe` on a system that takes
any input other than `()`.
- The `IntoPipeSystem` trait is currently very difficult to parse due to
its use of generics.
## Solution
Remove the `IntoPipeSystem` trait, and move the `pipe` method to
`IntoSystem`.
---
## Changelog
- System piping has been made more flexible: it is now possible to call
`.pipe` on a system that takes an input.
## Migration Guide
The `IntoPipeSystem` trait has been removed, and the `pipe` method has
been moved to the `IntoSystem` trait.
```rust
// Before:
use bevy_ecs::system::IntoPipeSystem;
schedule.add_systems(first.pipe(second));
// After:
use bevy_ecs::system::IntoSystem;
schedule.add_systems(first.pipe(second));
```
# Objective
- Fixes unclear warning when `insert_non_send_resource` is called on a
Send resource
## Solution
- Add a message to the asssert statement that checks this
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
The implementation of `System::run_unsafe` for `FunctionSystem` requires
that the world is the same one used to initialize the system. However,
the `System` trait has no requirements that the world actually matches,
which makes this implementation unsound.
This was previously mentioned in
https://github.com/bevyengine/bevy/pull/7605#issuecomment-1426491871
Fixes part of #7833.
## Solution
Add the safety invariant that
`System::update_archetype_component_access` must be called prior to
`System::run_unsafe`. Since
`FunctionSystem::update_archetype_component_access` properly validates
the world, this ensures that `run_unsafe` is not called with a
mismatched world.
Most exclusive systems are not required to be run on the same world that
they are initialized with, so this is not a concern for them. Systems
formed by combining an exclusive system with a regular system *do*
require the world to match, however the validation is done inside of
`System::run` when needed.
# Objective
This PR attempts to improve query compatibility checks in scenarios
involving `Or` filters.
Currently, for the following two disjoint queries, Bevy will throw a
panic:
```
fn sys(_: Query<&mut C, Or<(With<A>, With<B>)>>, _: Query<&mut C, (Without<A>, Without<B>)>) {}
```
This PR addresses this particular scenario.
## Solution
`FilteredAccess::with` now stores a vector of `AccessFilters`
(representing a pair of `with` and `without` bitsets), where each member
represents an `Or` "variant".
Filters like `(With<A>, Or<(With<B>, Without<C>)>` are expected to be
expanded into `A * B + A * !C`.
When calculating whether queries are compatible, every `AccessFilters`
of a query is tested for incompatibility with every `AccessFilters` of
another query.
---
## Changelog
- Improved system and query data access compatibility checks in
scenarios involving `Or` filters
---------
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
If you want to execute a schedule on the world using arbitrarily complex
behavior, you currently need to use "hokey-pokey strats": remove the
schedule from the world, do your thing, and add it back to the world.
Not only is this cumbersome, it's potentially error-prone as one might
forget to re-insert the schedule.
## Solution
Add the `World::{try}schedule_scope{ref}` family of functions, which is
a convenient abstraction over hokey pokey strats. This method
essentially works the same way as `World::resource_scope`.
### Example
```rust
// Run the schedule five times.
world.schedule_scope(MySchedule, |world, schedule| {
for _ in 0..5 {
schedule.run(world);
}
});
```
---
## Changelog
Added the `World::schedule_scope` family of methods, which provide a way
to get mutable access to a world and one of its schedules at the same
time.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
The behavior of change detection within `PipeSystem` is very tricky and
subtle, and is not currently covered by any of our tests as far as I'm
aware.
# Objective
Upon closer inspection, there are a few functions in the ECS that are
not being inlined, even with the highest optimizations and LTO enabled:
- Almost all
[WorldQuery::init_fetch](9fd5f20e25/results/query_get.s (L57))
calls. Affects `Query::get` calls in hot loops. In particular, the
`WorldQuery` implementation for `()` is used *everywhere* as the default
filter and is effectively a no-op.
-
[Entities::get](9fd5f20e25/results/query_get.s (L39)).
Affects `Query::get`, `World::get`, and any component insertion or
removal.
-
[Entities::set](9fd5f20e25/results/entity_remove.s (L2487)).
Affects any component insertion or removal.
-
[Tick::new](9fd5f20e25/results/entity_insert.s (L1368)).
I've only seen this in component insertion and spawning.
- ArchetypeRow::new
- BlobVec::set_len
Almost all of these have trivial or even empty implementations or have
significant opportunity to be optimized into surrounding code when
inlined with LTO enabled.
## Solution
Inline them
# Objective
The method `World::try_run_schedule` currently panics if the `Schedules`
resource does not exist, but it should just return an `Err`. Similarly,
`World::add_schedule` panics unnecessarily if the resource does not
exist.
Also, the documentation for `World::add_schedule` is completely wrong.
## Solution
When the `Schedules` resource does not exist, we now treat it the same
as if it did exist but was empty. When calling `add_schedule`, we
initialize it if it does not exist.
# Objective
Fixes#8215 and #8152. When systems panic, it causes the main thread to
panic as well, which clutters the output.
## Solution
Resolves the panic in the multi-threaded scheduler. Also adds an extra
message that tells the user the system that panicked.
Using the example from the issue, here is what the messages now look
like:
```rust
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Update, panicking_system)
.run();
}
fn panicking_system() {
panic!("oooh scary");
}
```
### Before
```
Compiling bevy_test v0.1.0 (E:\Projects\Rust\bevy_test)
Finished dev [unoptimized + debuginfo] target(s) in 2m 58s
Running `target\debug\bevy_test.exe`
2023-03-30T22:19:09.234932Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Windows 10 Pro", kernel: "19044", cpu: "AMD Ryzen 5 2600 Six-Core Processor", core_count: "6", memory: "15.9 GiB" }
thread 'Compute Task Pool (5)' panicked at 'oooh scary', src\main.rs:11:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
thread 'Compute Task Pool (5)' panicked at 'A system has panicked so the executor cannot continue.: RecvError', E:\Projects\Rust\bevy\crates\bevy_ecs\src\schedule\executor\multi_threaded.rs:194:60
thread 'main' panicked at 'called `Option::unwrap()` on a `None` value', E:\Projects\Rust\bevy\crates\bevy_tasks\src\task_pool.rs:376:49
error: process didn't exit successfully: `target\debug\bevy_test.exe` (exit code: 101)
```
### After
```
Compiling bevy_test v0.1.0 (E:\Projects\Rust\bevy_test)
Finished dev [unoptimized + debuginfo] target(s) in 2.39s
Running `target\debug\bevy_test.exe`
2023-03-30T22:11:24.748513Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Windows 10 Pro", kernel: "19044", cpu: "AMD Ryzen 5 2600 Six-Core Processor", core_count: "6", memory: "15.9 GiB" }
thread 'Compute Task Pool (5)' panicked at 'oooh scary', src\main.rs:11:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Encountered a panic in system `bevy_test::panicking_system`!
Encountered a panic in system `bevy_app::main_schedule::Main::run_main`!
error: process didn't exit successfully: `target\debug\bevy_test.exe` (exit code: 101)
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fix#8191.
Currently, a state transition will be triggered whenever the `NextState`
resource has a value, even if that "transition" is to the same state as
the previous one. This caused surprising/meaningless behavior, such as
the existence of an `OnTransition { from: A, to: A }` schedule.
## Solution
State transition schedules now only run if the new state is not equal to
the old state. Change detection works the same way, only being triggered
when the states compare not equal.
---
## Changelog
- State transition schedules are no longer run when transitioning to and
from the same state.
## Migration Guide
State transitions are now only triggered when the exited and entered
state differ. This means that if the world is currently in state `A`,
the `OnEnter(A)` schedule (or `OnExit`) will no longer be run if you
queue up a state transition to the same state `A`.
# Objective
Noticed while writing #7728 that we are using `trace!` logs in our event
functions. This has shown to have significant overhead, even trace level
logs are disabled globally, as seen in #7639.
## Solution
Use the `detailed_trace!` macro introduced in #7639. Also removed the
`event_trace` function that was only used in one location.
---
## Changelog
Changed: Event trace logs are now feature gated behind the
`detailed-trace` feature.
Fixes#8333
# Objective
Fixes issue which causes failure to compile if using
`#![deny(missing_docs)]`.
## Solution
Added some very basic commenting to the generated read-only fields.
honestly I feel this to be up for debate since the comments are very
basic and give very little useful information but the purpose of this PR
is to fix the issue at hand.
---
## Changelog
Added comments to the derive macro and the projects now successfully
compile.
---------
Co-authored-by: lupan <kallll5@hotmail.com>
Fixes issue mentioned in PR #8285.
_Note: By mistake, this is currently dependent on #8285_
# Objective
Ensure consistency in the spelling of the documentation.
Exceptions:
`crates/bevy_mikktspace/src/generated.rs` - Has not been changed from
licence to license as it is part of a licensing agreement.
Maybe for further consistency,
https://github.com/bevyengine/bevy-website should also be given a look.
## Solution
### Changed the spelling of the current words (UK/CN/AU -> US) :
cancelled -> canceled (Breaking API changes in #8285)
behaviour -> behavior (Breaking API changes in #8285)
neighbour -> neighbor
grey -> gray
recognise -> recognize
centre -> center
metres -> meters
colour -> color
### ~~Update [`engine_style_guide.md`]~~ Moved to #8324
---
## Changelog
Changed UK spellings in documentation to US
## Migration Guide
Non-breaking changes*
\* If merged after #8285
# Objective
The clippy lint `type_complexity` is known not to play well with bevy.
It frequently triggers when writing complex queries, and taking the
lint's advice of using a type alias almost always just obfuscates the
code with no benefit. Because of this, this lint is currently ignored in
CI, but unfortunately it still shows up when viewing bevy code in an
IDE.
As someone who's made a fair amount of pull requests to this repo, I
will say that this issue has been a consistent thorn in my side. Since
bevy code is filled with spurious, ignorable warnings, it can be very
difficult to spot the *real* warnings that must be fixed -- most of the
time I just ignore all warnings, only to later find out that one of them
was real after I'm done when CI runs.
## Solution
Suppress this lint in all bevy crates. This was previously attempted in
#7050, but the review process ended up making it more complicated than
it needs to be and landed on a subpar solution.
The discussion in https://github.com/rust-lang/rust-clippy/pull/10571
explores some better long-term solutions to this problem. Since there is
no timeline on when these solutions may land, we should resolve this
issue in the meantime by locally suppressing these lints.
### Unresolved issues
Currently, these lints are not suppressed in our examples, since that
would require suppressing the lint in every single source file. They are
still ignored in CI.
# Objective
State requires a kind of awkward `state.0` to get the current state and
exposes the field directly to manipulation.
## Solution
Make it accessible through a getter method as well as privatize the
field to make sure false assumptions about setting the state aren't
made.
## Migration Guide
- Use `State::get` instead of accessing the tuple field directly.
# Objective
The `#[derive(WorldQuery)]` macro currently only supports structs with
named fields.
Same motivation as #6957. Remove sharp edges from the derive macro, make
it just work more often.
## Solution
Support tuple structs.
---
## Changelog
+ Added support for tuple structs to the `#[derive(WorldQuery)]` macro.
# Objective
While migrating the engine to use the `Tick` type in #7905, I forgot to
update `UnsafeWorldCell::increment_change_tick`.
## Solution
Update the function.
---
## Changelog
- The function `UnsafeWorldCell::increment_change_tick` is now
strongly-typed, returning a value of type `Tick` instead of a raw `u32`.
## Migration Guide
The function `UnsafeWorldCell::increment_change_tick` is now
strongly-typed, returning a value of type `Tick` instead of a raw `u32`.
# Objective
The type `&World` is currently in an awkward place, since it has two
meanings:
1. Read-only access to the entire world.
2. Interior mutable access to the world; immutable and/or mutable access
to certain portions of world data.
This makes `&World` difficult to reason about, and surprising to see in
function signatures if one does not know about the interior mutable
property.
The type `UnsafeWorldCell` was added in #6404, which is meant to
alleviate this confusion by adding a dedicated type for interior mutable
world access. However, much of the engine still treats `&World` as an
interior mutable-ish type. One of those places is `SystemParam`.
## Solution
Modify `SystemParam::get_param` to accept `UnsafeWorldCell` instead of
`&World`. Simplify the safety invariants, since the `UnsafeWorldCell`
type encapsulates the concept of constrained world access.
---
## Changelog
`SystemParam::get_param` now accepts an `UnsafeWorldCell` instead of
`&World`. This type provides a high-level API for unsafe interior
mutable world access.
## Migration Guide
For manual implementers of `SystemParam`: the function `get_item` now
takes `UnsafeWorldCell` instead of `&World`. To access world data, use:
* `.get_entity()`, which returns an `UnsafeEntityCell` which can be used
to access component data.
* `get_resource()` and its variants, to access resource data.
# Objective
The function `SyncUnsafeCell::from_mut` returns `&SyncUnsafeCell<T>`,
even though it could return `&mut SyncUnsafeCell<T>`. This means it is
not possible to call `get_mut` on the returned value, so you need to use
unsafe code to get exclusive access back.
## Solution
Return `&mut Self` instead of `&Self` in `SyncUnsafeCell::from_mut`.
This is consistent with my proposal for `UnsafeCell::from_mut`:
https://github.com/rust-lang/libs-team/issues/198.
Replace an unsafe pointer dereference with a safe call to `get_mut`.
---
## Changelog
+ The function `bevy_utils::SyncUnsafeCell::get_mut` now returns a value
of type `&mut SyncUnsafeCell<T>`. Previously, this returned an immutable
reference.
## Migration Guide
The function `bevy_utils::SyncUnsafeCell::get_mut` now returns a value
of type `&mut SyncUnsafeCell<T>`. Previously, this returned an immutable
reference.
# Objective
The documentation on `QueryState::for_each_unchecked` incorrectly says
that it can only be used with read-only queries.
## Solution
Remove the inaccurate sentence.
# Objective
Follow-up to #8030.
Now that `SystemParam` and `WorldQuery` are implemented for
`PhantomData`, the `ignore` attributes are now unnecessary.
---
## Changelog
- Removed the attributes `#[system_param(ignore)]` and
`#[world_query(ignore)]`.
## Migration Guide
The attributes `#[system_param(ignore)]` and `#[world_query]` ignore
have been removed. If you were using either of these with `PhantomData`
fields, you can simply remove the attribute:
```rust
#[derive(SystemParam)]
struct MyParam<'w, 's, Marker> {
...
// Before:
#[system_param(ignore)
_marker: PhantomData<Marker>,
// After:
_marker: PhantomData<Marker>,
}
#[derive(WorldQuery)]
struct MyQuery<Marker> {
...
// Before:
#[world_query(ignore)
_marker: PhantomData<Marker>,
// After:
_marker: PhantomData<Marker>,
}
```
If you were using this for another type that implements `Default`,
consider wrapping that type in `Local<>` (this only works for
`SystemParam`):
```rust
#[derive(SystemParam)]
struct MyParam<'w, 's> {
// Before:
#[system_param(ignore)]
value: MyDefaultType, // This will be initialized using `Default` each time `MyParam` is created.
// After:
value: Local<MyDefaultType>, // This will be initialized using `Default` the first time `MyParam` is created.
}
```
If you are implementing either trait and need to preserve the exact
behavior of the old `ignore` attributes, consider manually implementing
`SystemParam` or `WorldQuery` for a wrapper struct that uses the
`Default` trait:
```rust
// Before:
#[derive(WorldQuery)
struct MyQuery {
#[world_query(ignore)]
str: String,
}
// After:
#[derive(WorldQuery)
struct MyQuery {
str: DefaultQuery<String>,
}
pub struct DefaultQuery<T: Default>(pub T);
unsafe impl<T: Default> WorldQuery for DefaultQuery<T> {
type Item<'w> = Self;
...
unsafe fn fetch<'w>(...) -> Self::Item<'w> {
Self(T::default())
}
}
```
# Objective
Our regression tests for `SystemParam` currently consist of a bunch of
loosely dispersed struct definitions. This is messy, and doesn't fully
test their functionality.
## Solution
Group the struct definitions into functions annotated with `#[test]`.
This not only makes the module more organized, but it allows us to call
`assert_is_system`, which has the potential to catch some bugs that
would have been missed with the old approach. Also, this approach is
consistent with how `WorldQuery` regression tests are organized.
# Objective
- Fixes#7659
## Solution
The idea of anonymous system sets or "implicit hidden organizational
sets" was briefly mentioned by @cart here:
https://github.com/bevyengine/bevy/pull/7634#issuecomment-1428619449.
- `Schedule::add_systems` creates an implicit, anonymous system set of
all systems in `SystemConfigs`.
- All dependencies and conditions from the `SystemConfigs` are now
applied to the implicit system set, instead of being applied to each
individual system. This should not change the behavior, AFAIU, because
`before`, `after`, `run_if` and `ambiguous_with` are transitive
properties from a set to its members.
- The newly added `AnonymousSystemSet` stores the names of its members
to provide better error messages.
- The names are stored in a reference counted slice, allowing fast
clones of the `AnonymousSystemSet`.
- However, only the pointer of the slice is used for hash and equality
operations
- This ensures that two `AnonymousSystemSet` are not equal, even if they
have the same members / member names.
- So two identical `add_systems` calls will produce two different
`AnonymousSystemSet`s.
- Clones of the same `AnonymousSystemSet` will be equal.
## Drawbacks
If my assumptions are correct, the observed behavior should stay the
same. But the number of system sets in the `Schedule` will increase with
each `add_systems` call. If this has negative performance implications,
`add_systems` could be changed to only create the implicit system set if
necessary / when a run condition was added.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
With the removal of base sets, some variants of `ScheduleBuildError` can
never occur and should be removed.
## Solution
- Remove the obsolete variants of `ScheduleBuildError`.
- Also fix a doc comment which mentioned base sets.
---
## Changelog
### Removed
- Remove `ScheduleBuildError::SystemInMultipleBaseSets` and
`ScheduleBuildError::SetInMultipleBaseSets`.
# Objective
When using `PhantomData` fields with the `#[derive(SystemParam)]` or
`#[derive(WorldQuery)]` macros, the user is required to add the
`#[system_param(ignore)]` attribute so that the macro knows to treat
that field specially. This is undesirable, since it makes the macro more
fragile and less consistent.
## Solution
Implement `SystemParam` and `WorldQuery` for `PhantomData`. This makes
the `ignore` attributes unnecessary.
Some internal changes make the derive macro compatible with types that
have invariant lifetimes, which fixes#8192. From what I can tell, this
fix requires `PhantomData` to implement `SystemParam` in order to ensure
that all of a type's generic parameters are always constrained.
---
## Changelog
+ Implemented `SystemParam` and `WorldQuery` for `PhantomData<T>`.
+ Fixed a miscompilation caused when invariant lifetimes were used with
the `SystemParam` macro.
# Objective
I ran into a case where I need to create a `CommandQueue` and push
standard `Command` actions like `Insert` or `Remove` to it manually. I
saw that `Remove` looked as follows:
```rust
struct Remove<T> {
entity: Entity,
phantom: PhantomData<T>
}
```
so naturally, I tried to use `Remove::<Foo>::from(entity)` but it didn't
exist. We need to specify the `PhantomData` explicitly when creating
this command action. The same goes for `RemoveResource` and
`InitResource`
## Solution
This PR implements the following:
- `From<Entity>` for `Remove<T>`
- `Default` for `RemoveResource` and `InitResource`
- use these traits in the implementation of methods of `Commands`
- rename `phantom` field on the structs above to `_phantom` to have a
more uniform field naming scheme for the command actions
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Added: implemented `From<Entity>` for `Remove<T>` and `Default` for
`RemoveResource` and `InitResource` for ergonomics
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fix a bug with scene reload.
(This is a copy of #7570 but without the breaking API change, in order
to allow the bugfix to be introduced in 0.10.1)
When a scene was reloaded, it was corrupting components that weren't
native to the scene itself. In particular, when a DynamicScene was
created on Entity (A), all components in the scene without parents are
automatically added as children of Entity (A). But if that scene was
reloaded and the same ID of Entity (A) was a scene ID as well*, that
parent component was corrupted, causing the hierarchy to become
malformed and bevy to panic.
*For example, if Entity (A)'s ID was 3, and the scene contained an
entity with ID 3
This issue could affect any components that:
* Implemented `MapEntities`, basically components that contained
references to other entities
* Were added to entities from a scene file but weren't defined in the
scene file
- Fixes#7529
## Solution
The solution was to keep track of entities+components that had
`MapEntities` functionality during scene load, and only apply the entity
update behavior to them. They were tracked with a HashMap from the
component's TypeID to a vector of entity ID's. Then the
`ReflectMapEntities` struct was updated to hold a function that took a
list of entities to be applied to, instead of naively applying itself to
all values in the EntityMap.
(See this PR comment
https://github.com/bevyengine/bevy/pull/7570#issuecomment-1432302796 for
a story-based explanation of this bug and solution)
## Changelog
### Fixed
- Components that implement `MapEntities` added to scene entities after
load are not corrupted during scene reload.
# Objective
Documentation should no longer be using pre-stageless terminology to
avoid confusion.
## Solution
- update all docs referring to stages to instead refer to sets/schedules
where appropriate
- also mention `apply_system_buffers` for anything system-buffer-related
that previously referred to buffers being applied "at the end of a
stage"
# Objective
`Or<T>` should be a new type of `PhantomData<T>` instead of `T`.
## Solution
Make `Or<T>` a new type of `PhantomData<T>`.
## Migration Guide
`Or<T>` is just used as a type annotation and shouldn't be constructed.
# Objective
When using the `#[derive(WorldQuery)]` macro, the `ReadOnly` struct
generated has default (private) visibility for each field, regardless of
the visibility of the original field.
## Solution
For each field of a read-only `WorldQuery` variant, use the visibility
of the associated field defined on the original struct.
# Objective
Fix#1727Fix#8010
Meta types generated by the `SystemParam` and `WorldQuery` derive macros
can conflict with user-defined types if they happen to have the same
name.
## Solution
In order to check if an identifier would conflict with user-defined
types, we can just search the original `TokenStream` passed to the macro
to see if it contains the identifier (since the meta types are defined
in an anonymous scope, it's only possible for them to conflict with the
struct definition itself). When generating an identifier for meta types,
we can simply check if it would conflict, and then add additional
characters to the name until it no longer conflicts with anything.
The `WorldQuery` "Item" and read-only structs are a part of a module's
public API, and thus it is intended for them to conflict with
user-defined types.
# Objective
The function `assert_is_system` is used in documentation tests to ensure
that example code actually produces valid systems. Currently,
`assert_is_system` just checks that each function parameter implements
`SystemParam`. To further check the validity of the system, we should
initialize the passed system so that it will be checked for conflicting
accesses. Not only does this enforce the validity of our examples, but
it provides a convenient way to demonstrate conflicting accesses via a
`should_panic` example, which is nicely rendered by rustdoc:
## Solution
Initialize the system with an empty world to trigger its internal access
conflict checks.
---
## Changelog
The function `bevy::ecs::system::assert_is_system` now panics when
passed a system with conflicting world accesses, as does
`assert_is_read_only_system`.
## Migration Guide
The functions `assert_is_system` and `assert_is_read_only_system` (in
`bevy_ecs::system`) now panic if the passed system has invalid world
accesses. Any tests that called this function on a system with invalid
accesses will now fail. Either fix the system's conflicting accesses, or
specify that the test is meant to fail:
1. For regular tests (that is, functions annotated with `#[test]`), add
the `#[should_panic]` attribute to the function.
2. For documentation tests, add `should_panic` to the start of the code
block: ` ```should_panic`
# Objective
We're currently using an unconditional `unwrap` in multiple locations
when inserting bundles into an entity when we know it will never fail.
This adds a large amount of extra branching that could be avoided on in
release builds.
## Solution
Use `DebugCheckedUnwrap` in bundle insertion code where relevant. Add
and update the safety comments to match.
This should remove the panicking branches from release builds, which has
a significant impact on the generated code:
https://github.com/james7132/bevy_asm_tests/compare/less-panicking-bundles#diff-e55a27cfb1615846ed3b6472f15a1aed66ed394d3d0739b3117f95cf90f46951R2086
shows about a 10% reduction in the number of generated instructions for
`EntityMut::insert`, `EntityMut::remove`, `EntityMut::take`, and related
functions.
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
This MR is a rebased and alternative proposal to
https://github.com/bevyengine/bevy/pull/5602
# Objective
- https://github.com/bevyengine/bevy/pull/4447 implemented untyped
(using component ids instead of generics and TypeId) APIs for
inserting/accessing resources and accessing components, but left
inserting components for another PR (this one)
## Solution
- add `EntityMut::insert_by_id`
- split `Bundle` into `DynamicBundle` with `get_components` and `Bundle:
DynamicBundle`. This allows the `BundleInserter` machinery to be reused
for bundles that can only be written, not read, and have no statically
available `ComponentIds`
- Compared to the original MR this approach exposes unsafe endpoints and
requires the user to manage instantiated `BundleIds`. This is quite easy
for the end user to do and does not incur the performance penalty of
checking whether component input is correctly provided for the
`BundleId`.
- This MR does ensure that constructing `BundleId` itself is safe
---
## Changelog
- add methods for inserting bundles and components to:
`world.entity_mut(entity).insert_by_id`
# Objective
#7863 introduced a potential footgun. When trying to incorrectly add a user-defined type using `in_base_set`, the compiler will suggest that the user implement `BaseSystemSet` for their type. This is a reasonable-sounding suggestion, however this is not the correct way to make a base set, and will lead to a confusing panic message when a marker trait is implemented for the wrong type.
## Solution
Rewrite the documentation for these traits, making it more clear that `BaseSystemSet` is a marker for types that are already base sets, and not a way to define a base set.
# Objective
The trait `IntoSystemConfig<>` requires each implementer to repeat every single member method, even though they can all be implemented by just deferring to `SystemConfig`.
## Solution
Add default implementations to most member methods.
# Objective
Base sets, added in #7466 are a special type of system set. Systems can only be added to base sets via `in_base_set`, while non-base sets can only be added via `in_set`. Unfortunately this is currently guarded by a runtime panic, which presents an unfortunate toe-stub when the wrong method is used. The delayed response between writing code and encountering the error (possibly hours) makes the distinction between base sets and other sets much more difficult to learn.
## Solution
Add the marker traits `BaseSystemSet` and `FreeSystemSet`. `in_base_set` and `in_set` now respectively accept these traits, which moves the runtime panic to a compile time error.
---
## Changelog
+ Added the marker trait `BaseSystemSet`, which is distinguished from a `FreeSystemSet`. These are both subtraits of `SystemSet`.
## Migration Guide
None if merged with 0.10
…or's ticker for one thread.
# Objective
- Fix debug_asset_server hang.
## Solution
- Reuse the thread_local executor for MainThreadExecutor resource, so there will be only one ThreadExecutor for main thread.
- If ThreadTickers from same executor, they are conflict with each other. Then only tick one.
# Objective
The `ScheduleBuildError` type has a `Display` implementation which beautifully formats the error. However, schedule build errors are currently reported using `unwrap()`, which uses the `Debug` implementation and makes the error message look unfished.
## Solution
Use `unwrap_or_else` so we can customize the formatting of the error message.
# Objective
Several `Query` methods unnecessarily place the call to `Query::update_archetypes` inside of unsafe blocks.
## Solution
Move the method calls out of the unsafe blocks.
# Objective
There is a panic that occurs when creating a run condition that accesses `NonSend` resources, but it refers to them as 'thread-local' resources instead.
## Solution
Correct the terminology.
# Objective
This is a follow-up to #7745. An unbounded `async_channel` occasionally allocates whenever it exceeds the capacity of the current buffer in it's internal linked list. This is avoidable.
This also used to be a bounded channel before stageless, which was introduced in #4919.
## Solution
Use a bounded channel to avoid allocations on system completion.
This shouldn't conflict with #7745, as it's impossible for the scheduler to exceed the channel capacity, even if somehow every system completed at the same time.
`EntityMut::move_entity_from_remove` had two soundness bugs:
- When removing the entity from the archetype, the swapped entity had its table row updated to the same as the removed entity's
- When removing the entity from the table, the swapped entity did not have its table row updated
`BundleInsert::insert` had two/three soundness bugs
- When moving an entity to a new archetype from an `insert`, the swapped entity had its table row set to a different entities
- When moving an entity to a new table from an `insert`, the swapped entity did not have its table row updated
See added tests for examples that trigger those bugs
`EntityMut::despawn` had two soundness bugs
- When despawning an entity, the swapped entity had its table row set to a different entities even if the table didnt change
- When despawning an entity, the swapped entity did not have its table row updated
# Objective
- A more intuitive distinction between the two. `remove_intersection` is verbose and unclear.
- `EntityMut::remove` and `Commands::remove` should match.
## Solution
- What the title says.
---
## Migration Guide
Before
```rust
fn clear_children(parent: Entity, world: &mut World) {
if let Some(children) = world.entity_mut(parent).remove::<Children>() {
for &child in &children.0 {
world.entity_mut(child).remove_intersection::<Parent>();
}
}
}
```
After
```rust
fn clear_children(parent: Entity, world: &mut World) {
if let Some(children) = world.entity_mut(parent).take::<Children>() {
for &child in &children.0 {
world.entity_mut(child).remove::<Parent>();
}
}
}
```
# Objective
Support the following syntax for adding systems:
```rust
App::new()
.add_system(setup.on_startup())
.add_systems((
show_menu.in_schedule(OnEnter(GameState::Paused)),
menu_ssytem.in_set(OnUpdate(GameState::Paused)),
hide_menu.in_schedule(OnExit(GameState::Paused)),
))
```
## Solution
Add the traits `IntoSystemAppConfig{s}`, which provide the extension methods necessary for configuring which schedule a system belongs to. These extension methods return `IntoSystemAppConfig{s}`, which `App::add_system{s}` uses to choose which schedule to add systems to.
---
## Changelog
+ Added the extension methods `in_schedule(label)` and `on_startup()` for configuring the schedule a system belongs to.
## Future Work
* Replace all uses of `add_startup_system` in the engine.
* Deprecate this method
# Objective
While we use `#[doc(hidden)]` to try and hide marker generics from the user, these types reveal themselves in compiler errors, adding visual noise and confusion.
## Solution
Replace the `AlreadyWasSystem` marker generic with `()`, to reduce visual noise in error messages. This also makes it possible to return `impl Condition<()>` from combinators.
For function systems, use their function signature as the marker type. This should drastically improve the legibility of some error messages.
The `InputMarker` type has been removed, since it is unnecessary.
# Objective
Several places in the ECS use marker generics to avoid overlapping trait implementations, but different places alternately refer to it as `Params` and `Marker`. This is potentially confusing, since it might not be clear that the same pattern is being used. Additionally, users might be misled into thinking that the `Params` type corresponds to the `SystemParam`s of a system.
## Solution
Rename `Params` to `Marker`.
# Objective
Fixes#3980
## Solution
Added examples to show how to run a `Schedule`, one with a unique system, and another with several systems
---
## Changelog
- Added: examples in docs to show how to run a `Schedule`
Co-authored-by: remiCzn <77072160+remiCzn@users.noreply.github.com>
# Objective
The `BoxedCondition` type alias does not require the underlying system to be read-only.
## Solution
Define the type alias using `ReadOnlySystem` instead of `System`.
Graph theory make head hurty. Closes#7367.
Basically, when we topologically sort the dependency graph, we already find its strongly-connected components (a really [neat algorithm][1]). This PR adds an algorithm that can dissect those into simple cycles, giving us more useful error reports.
test: `system_build_errors::dependency_cycle`
```
schedule has 1 before/after cycle(s):
cycle 1: system set 'A' must run before itself
system set 'A'
... which must run before system set 'B'
... which must run before system set 'A'
```
```
schedule has 1 before/after cycle(s):
cycle 1: system 'foo' must run before itself
system 'foo'
... which must run before system 'bar'
... which must run before system 'foo'
```
test: `system_build_errors::hierarchy_cycle`
```
schedule has 1 in_set cycle(s):
cycle 1: system set 'A' contains itself
system set 'A'
... which contains system set 'B'
... which contains system set 'A'
```
[1]: https://en.wikipedia.org/wiki/Tarjan%27s_strongly_connected_components_algorithm
Add some more useful common run conditions.
Some of these existed in `iyes_loopless`. I know people used them, and it would be a regression for those users, when they try to migrate to new Bevy stageless, if they are missing.
I also took the opportunity to add a few more new ones.
---
## Changelog
### Added
- More "common run conditions": on_event, resource change detection, state_changed, any_with_component
# Objective
Fix#5026.
## Solution
Only make a `trace!` log if the event count changed.
---
## Changelog
Changed: `EventWriter::send_batch` will only log a TRACE level log if the batch is non-empty.
# Objective
Fix#7584.
## Solution
Add an abstraction for creating custom system combinators with minimal boilerplate. Use this to implement AND/OR combinators. Use this to simplify the implementation of `PipeSystem`.
## Example
Feel free to bikeshed on the syntax.
I chose the names `and_then`/`or_else` to emphasize the fact that these short-circuit, while I chose method syntax to empasize that the arguments are *not* treated equally.
```rust
app.add_systems((
my_system.run_if(resource_exists::<R>().and_then(resource_equals(R(0)))),
our_system.run_if(resource_exists::<R>().or_else(resource_exists::<S>())),
));
```
---
## Todo
- [ ] Decide on a syntax
- [x] Write docs
- [x] Write tests
## Changelog
+ Added the extension methods `.and_then(...)` and `.or_else(...)` to run conditions, which allows combining run conditions with short-circuiting behavior.
+ Added the trait `Combine`, which can be used with the new `CombinatorSystem` to create system combinators with custom behavior.
# Objective
- Fixes#7442.
## Solution
- Added `report_sets` option to `ScheduleBuildSettings` like described in the linked issue.
The output of the `3d_scene` example when reporting ambiguities with `report_sets` and `use_shortnames` set to `true` (and with #7755 applied) now looks like this:
```
82 pairs of systems with conflicting data access have indeterminate execution order. Consider adding `before`, `after`, or `ambiguous_with` relationships between these:
-- filesystem_watcher_system (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<DynamicScene> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Scene> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Shader> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Mesh> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<SkinnedMeshInverseBindposes> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Image> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<TextureAtlas> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<ColorMaterial> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Font> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<FontAtlasSet> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<StandardMaterial> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Gltf> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<GltfNode> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<GltfPrimitive> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<GltfMesh> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<AudioSource> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<AudioSink> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<AnimationClip> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- scene_spawner_system (Update) and close_when_requested (Update)
conflict on: bevy_ecs::world::World
-- exit_on_all_closed (PostUpdate) and apply_system_buffers (CalculateBoundsFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- exit_on_all_closed (PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<Projection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (CalculateBoundsFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<Projection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<OrthographicProjection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (CalculateBoundsFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<OrthographicProjection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<PerspectiveProjection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (CalculateBoundsFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<PerspectiveProjection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- calculate_bounds (CalculateBounds, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and visibility_propagate_system (PostUpdate, VisibilityPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_text2d_layout (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and ui_stack_system (PostUpdate, Stack)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and text_system (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_image_calculated_size_system (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and flex_node_system (Flex, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and add_clusters (AddClusters, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and play_queued_audio_system<AudioSource> (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and animation_player (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and propagate_transforms (PostUpdate, TransformPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and sync_simple_transforms (PostUpdate, TransformPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_directional_light_cascades (PostUpdate, UpdateDirectionalLightCascades)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_clipping_system (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_frusta<Projection> (PostUpdate, UpdateProjectionFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_frusta<PerspectiveProjection> (PostUpdate, UpdatePerspectiveFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_frusta<OrthographicProjection> (PostUpdate, UpdateOrthographicFrusta)
conflict on: bevy_ecs::world::World
-- visibility_propagate_system (PostUpdate, VisibilityPropagate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- update_text2d_layout (PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- ui_stack_system (PostUpdate, Stack) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- text_system (PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- update_image_calculated_size_system (PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- flex_node_system (Flex, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- flex_node_system (Flex, PostUpdate) and animation_player (PostUpdate)
conflict on: ["bevy_transform::components::transform::Transform"]
-- apply_system_buffers (AddClustersFlush, PostUpdate) and play_queued_audio_system<AudioSource> (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and animation_player (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and propagate_transforms (PostUpdate, TransformPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and sync_simple_transforms (PostUpdate, TransformPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_directional_light_cascades (PostUpdate, UpdateDirectionalLightCascades)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_clipping_system (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_frusta<Projection> (PostUpdate, UpdateProjectionFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_frusta<PerspectiveProjection> (PostUpdate, UpdatePerspectiveFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_frusta<OrthographicProjection> (PostUpdate, UpdateOrthographicFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and check_visibility (CheckVisibility, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_directional_light_frusta (PostUpdate, UpdateLightFrusta)
conflict on: bevy_ecs::world::World
-- Assets<Scene>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Shader>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Mesh>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<SkinnedMeshInverseBindposes>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Image>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<TextureAtlas>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<ColorMaterial>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Font>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<FontAtlasSet>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<StandardMaterial>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Gltf>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<GltfNode>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<GltfPrimitive>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<GltfMesh>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<AudioSource>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<AudioSink>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<AnimationClip>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<DynamicScene>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
```
Co-authored-by: Edgar Geier <geieredgar@gmail.com>
# Objective
Allow using `Local<WorldId>` in systems.
## Solution
- Describe the solution used to achieve the objective above.
---
## Changelog
+ `WorldId` now implements the `FromWorld` trait.
…top sort. reduce mem alloc
# Objective
- Reduce alloc count.
- Improve code quality.
## Solution
- use `TarjanScc::run` directly, which calls a closure with each scc, in closure, we can detect cycles and flatten nodes
# Objective
`ChangeTrackers<>` is a `WorldQuery` type that lets you access the change ticks for a component. #7097 has added `Ref<>`, which gives access to a component's value in addition to its change ticks. Since bevy's access model does not separate a component's value from its change ticks, there is no benefit to using `ChangeTrackers<T>` over `Ref<T>`.
## Solution
Deprecate `ChangeTrackers<>`.
---
## Changelog
* `ChangeTrackers<T>` has been deprecated. It will be removed in Bevy 0.11.
## Migration Guide
`ChangeTrackers<T>` has been deprecated, and will be removed in the next release. Any usage should be replaced with `Ref<T>`.
```rust
// Before (0.9)
fn my_system(q: Query<(&MyComponent, ChangeTrackers<MyComponent>)>) {
for (value, trackers) in &q {
if trackers.is_changed() {
// Do something with `value`.
}
}
}
// After (0.10)
fn my_system(q: Query<Ref<MyComponent>>) {
for value in &q {
if value.is_changed() {
// Do something with `value`.
}
}
}
```
# Objective
Fixes#7736
## Solution
Implement the `SystemParam` trait for `WorldId`
## Changelog
- `WorldId` can now be taken as a system parameter and will return the id of the world the system is running in
# Objective
- Fixes#7659.
## Solution
- This PR extracted the `distributive_run_if` part of #7676, because it does not require the controversial introduction of anonymous system sets.
- The distinctive name should make the user aware about the differences between `IntoSystemConfig::run_if` and `IntoSystemConfigs::distributive_run_if`.
- The documentation explains in detail the consequences of using the API and possible pit falls when using it.
- A test demonstrates the possibility of changing the condition result, resulting in some of the systems not being run.
---
## Changelog
### Added
- Add `distributive_run_if` to `IntoSystemConfigs` to enable adding a run condition to each system when using `add_systems`.
follow-up to https://github.com/bevyengine/bevy/pull/7716
# Objective
System access is only populated in `System::initialize`, so without calling `initialize` it's actually impossible to see most ambiguities.
## Solution
- make `initialize` public. The method is idempotent, so calling it multiple times doesn't hurt
# Objective
Continuation of https://github.com/bevyengine/bevy/pull/5719
Now that we have a definable type for the iterator.
---
## Changelog
- Implemented IntoIterator for EventReader so you can now do `&mut reader` instead of `reader.iter()` for events.
# Objective
Fix#7440. Fix#7441.
## Solution
* Remove builder functions on `ScheduleBuildSettings` in favor of public fields, move docs to the fields.
* Add `use_shortnames` and use it in `get_node_name` to feed it through `bevy_utils::get_short_name`.
# Objective
Web builds do not support running on multiple threads right now. Defaulting to the multi-threaded executor has significant overhead without any benefit.
## Solution
Default to the single threaded executor on wasm32 builds.
# Objective
- other tools (bevy_mod_debugdump) would like to have access to the ambiguities so that they can do their own reporting/visualization
## Solution
- store `conflicting_systems` in `ScheduleGraph` after calling `build_schedule`
The solution isn't very pretty and as pointed out it https://github.com/bevyengine/bevy/pull/7522, there may be a better way of exposing this, but this is the quick and dirty way if we want to have this functionality exposed in 0.10.
# Objective
- RemovedComponents is just a thin wrapper around Events/ManualEventReader which is the same as an EventReader, so most usecases that of an EventReader will probably be useful for RemovedComponents too.
I was thinking of making a trait for this but I don't think it is worth the overhead currently.
## Solution
- Mirror the api surface of EventReader
# Objective
Motivated by #7469.
`EventReader` iterators use the default implementations for `.nth()` and `.last()`, which includes iterating over and throwing out all events before the desired one.
## Solution
Add specialized implementations for these methods that directly updates the unread event counter and returns a reference to the desired event.
TODO:
- [x] Add a unit test.
- [x] ~~Add a benchmark, to see if the compiler was doing this automatically already.~~ *On second thought, this doesn't feel like a very useful thing to include in the benchmark suite.*
# Objective
- it would be nice to be able to associate a `NodeId` of a system type set to the `NodeId` of the actual system (used in bevy_mod_debugdump)
## Solution
- make `system_type` return the type id of the system
- that way you can check if a `dyn SystemSet` is the system type set of a `dyn System`
- I don't know if this information is already present somewhere else in the scheduler or if there is a better way to expose it
# Objective
Fixes#7702.
## Solution
- Added an test that ensures that no error is returned if a system or set is inside two different sets that share the same base set.
- Added an check to only return an error if the two base sets are not equal.
# Objective
The `ScheduleGraph` should be expose so that crates like [bevy_mod_debugdump](https://github.com/jakobhellermann/bevy_mod_debugdump/blob/stageless/docs/README.md) can access useful information.
## Solution
- expose `ScheduleGraph`, `NodeId`, `BaseSetMembership`, `Dag`
- add accessor functions for sets and systems
## Changelog
- expose `ScheduleGraph` for use in third party tools
This does expose our use of `petgraph` as a graph library, so we can only change that as a breaking change.
# Objective
- Fixes#5432
- Fixes#6680
## Solution
- move code responsible for generating the `impl TypeUuid` from `type_uuid_derive` into a new function, `gen_impl_type_uuid`.
- this allows the new proc macro, `impl_type_uuid`, to call the code for generation.
- added struct `TypeUuidDef` and implemented `syn::Parse` to allow parsing of the input for the new macro.
- finally, used the new macro `impl_type_uuid` to implement `TypeUuid` for the standard library (in `crates/bevy_reflect/src/type_uuid_impl.rs`).
- fixes#6680 by doing a wrapping add of the param's index to its `TYPE_UUID`
Co-authored-by: dis-da-moe <84386186+dis-da-moe@users.noreply.github.com>
# Objective
The trait `Condition<>` is implemented for any type that can be converted into a `ReadOnlySystem` which takes no inputs and returns a bool. However, due to the current implementation, consumers of the trait cannot rely on the fact that `<T as Condition>::System` implements `ReadOnlySystem`. In cases such as the `not` combinator (added in #7559), we are required to add redundant `T::System: ReadOnlySystem` trait bounds, even though this should be implied by the `Condition<>` trait.
## Solution
Add a hidden associated type which allows the compiler to figure out that the `System` associated type implements `ReadOnlySystem`.
…able like Table. Rename clear to clear_entities to clarify that metadata keeps, only value cleared
# Objective
- Provide some inspectability for SparseSets.
## Solution
- `Tables` has these three methods, len, is_empty and iter too. Add these methods to `SparseSets`, so user can print the shape of storage.
---
## Changelog
> This section is optional. If this was a trivial fix, or has no externally-visible impact, you can delete this section.
- Add `len`, `is_empty`, `iter` methods on SparseSets.
- Rename `clear` to `clear_entities` to clarify its purpose.
- Add `new_for_test` on `ComponentInfo` to make test code easy.
- Add test case covering new methods.
## Migration Guide
> This section is optional. If there are no breaking changes, you can delete this section.
- Simply adding new functionality is not a breaking change.
# Objective
This PR improves message that caused by duplicate components in bundle.
## Solution
Show names of duplicate components.
The solution is not very elegant, in my opinion, I will be happy to listen to suggestions for improving it
Co-authored-by: Саня Череп <41489405+SDesya74@users.noreply.github.com>
# Objective
While porting my crate `bevy_trait_query` to bevy 0.10, I ran into an issue with the `DetectChangesMut` trait. Due to the way that the `set_if_neq` method (added in #6853) is implemented, you are forced to write a nonsense implementation of it for dynamically sized types. This edge case shows up when implementing trait queries, since `DetectChangesMut` is implemented for `Mut<dyn Trait>`.
## Solution
Simplify the generics for `set_if_neq` and add the `where Self::Target: Sized` trait bound to it. Add a default implementation so implementers don't need to implement a method with nonsensical trait bounds.
# Objective
The `SystemParamFunction` (and `ExclusiveSystemParamFunction`) trait is very cumbersome to use, due to it requiring four generic type parameters. These are currently all used as marker parameters to satisfy rust's trait coherence rules.
### Example (before)
```rust
pub fn pipe<AIn, Shared, BOut, A, AParam, AMarker, B, BParam, BMarker>(
mut system_a: A,
mut system_b: B,
) -> impl FnMut(In<AIn>, ParamSet<(AParam, BParam)>) -> BOut
where
A: SystemParamFunction<AIn, Shared, AParam, AMarker>,
B: SystemParamFunction<Shared, BOut, BParam, BMarker>,
AParam: SystemParam,
BParam: SystemParam,
```
## Solution
Turn the `In`, `Out`, and `Param` generics into associated types. Merge the marker types together to retain coherence.
### Example (after)
```rust
pub fn pipe<A, B, AMarker, BMarker>(
mut system_a: A,
mut system_b: B,
) -> impl FnMut(In<A::In>, ParamSet<(A::Param, B::Param)>) -> B::Out
where
A: SystemParamFunction<AMarker>,
B: SystemParamFunction<BMarker, In = A::Out>,
```
---
## Changelog
+ Simplified the `SystemParamFunction` and `ExclusiveSystemParamFunction` traits.
## Migration Guide
For users of the `SystemParamFunction` trait, the generic type parameters `In`, `Out`, and `Param` have been turned into associated types. The same has been done with the `ExclusiveSystemParamFunction` trait.
# Objective
- #6402 changed `World::fetch_table` (now `UnsafeWorldCell::fetch_table`) to access the archetype in order to get the `table_id` and `table_row` of the entity involved. However this is useless since those were already present in the `EntityLocation`
- Moreover it's useless for `UnsafeWorldCell::fetch_table` to return the `TableRow` too, since the caller must already have access to the `EntityLocation` which contains the `TableRow`.
- The result is that `UnsafeWorldCell::fetch_table` now only does 2 memory fetches instead of 4.
## Solution
- Revert the changes to the implementation of `UnsafeWorldCell::fetch_table` made in #6402
…u64, so hash safety is not a concern
# Objective
- While reading the code, just noticed the BundleInfo's HashMap is std::collections::HashMap, which uses a slow but safe hasher.
## Solution
- Use bevy_utils::HashMap instead
benchmark diff (I run several times in a linux box, the perf improvement is consistent, though numbers varies from time to time, I paste my last run result here):
``` bash
cargo bench -- spawn
Compiling bevy_ecs v0.9.0 (/home/lishuo/developer/pr/bevy/crates/bevy_ecs)
Compiling bevy_app v0.9.0 (/home/lishuo/developer/pr/bevy/crates/bevy_app)
Compiling benches v0.1.0 (/home/lishuo/developer/pr/bevy/benches)
Finished bench [optimized] target(s) in 1m 17s
Running benches/bevy_ecs/change_detection.rs (/home/lishuo/developer/pr/bevy/benches/target/release/deps/change_detection-86c5445d0dc34529)
Gnuplot not found, using plotters backend
Running benches/bevy_ecs/benches.rs (/home/lishuo/developer/pr/bevy/benches/target/release/deps/ecs-e49b3abe80bfd8c0)
Gnuplot not found, using plotters backend
spawn_commands/2000_entities
time: [153.94 µs 159.19 µs 164.37 µs]
change: [-14.706% -11.050% -6.9633%] (p = 0.00 < 0.05)
Performance has improved.
spawn_commands/4000_entities
time: [328.77 µs 339.11 µs 349.11 µs]
change: [-7.6331% -3.9932% +0.0487%] (p = 0.06 > 0.05)
No change in performance detected.
spawn_commands/6000_entities
time: [445.01 µs 461.29 µs 477.36 µs]
change: [-16.639% -13.358% -10.006%] (p = 0.00 < 0.05)
Performance has improved.
spawn_commands/8000_entities
time: [657.94 µs 677.71 µs 696.95 µs]
change: [-8.8708% -5.2591% -1.6847%] (p = 0.01 < 0.05)
Performance has improved.
get_or_spawn/individual time: [452.02 µs 466.70 µs 482.07 µs]
change: [-17.218% -14.041% -10.728%] (p = 0.00 < 0.05)
Performance has improved.
get_or_spawn/batched time: [291.12 µs 301.12 µs 311.31 µs]
change: [-12.281% -8.9163% -5.3660%] (p = 0.00 < 0.05)
Performance has improved.
spawn_world/1_entities time: [81.668 ns 84.284 ns 86.860 ns]
change: [-12.251% -6.7872% -1.5402%] (p = 0.02 < 0.05)
Performance has improved.
spawn_world/10_entities time: [789.78 ns 821.96 ns 851.95 ns]
change: [-19.738% -14.186% -8.0733%] (p = 0.00 < 0.05)
Performance has improved.
spawn_world/100_entities
time: [7.9906 µs 8.2449 µs 8.5013 µs]
change: [-12.417% -6.6837% -0.8766%] (p = 0.02 < 0.05)
Change within noise threshold.
spawn_world/1000_entities
time: [81.602 µs 84.161 µs 86.833 µs]
change: [-13.656% -8.6520% -3.0491%] (p = 0.00 < 0.05)
Performance has improved.
Found 1 outliers among 100 measurements (1.00%)
1 (1.00%) high mild
Benchmarking spawn_world/10000_entities: Warming up for 500.00 ms
Warning: Unable to complete 100 samples in 4.0s. You may wish to increase target time to 4.0s, enable flat sampling, or reduce sample count to 70.
spawn_world/10000_entities
time: [813.02 µs 839.76 µs 865.41 µs]
change: [-12.133% -6.1970% -0.2302%] (p = 0.05 < 0.05)
Change within noise threshold.
```
---
## Changelog
> This section is optional. If this was a trivial fix, or has no externally-visible impact, you can delete this section.
- use bevy_utils::HashMap for Bundles::bundle_ids
## Migration Guide
> This section is optional. If there are no breaking changes, you can delete this section.
- Not a breaking change, hashmap is internal impl.
# Objective
We have a few old system labels that are now system sets but are still named or documented as labels. Documentation also generally mentioned system labels in some places.
## Solution
- Clean up naming and documentation regarding system sets
## Migration Guide
`PrepareAssetLabel` is now called `PrepareAssetSet`
# Objective
- Improve readability of the run condition for systems only running in a certain state
## Solution
- Rename `state_equals` to `in_state` (see [comment by cart](https://github.com/bevyengine/bevy/pull/7634#issuecomment-1428740311) in #7634 )
- `.run_if(state_equals(variant))` now is `.run_if(in_state(variant))`
This breaks the naming pattern a bit with the related conditions `state_exists` and `state_exists_and_equals` but I could not think of better names for those and think the improved readability of `in_state` is worth it.
# Objective
Fixes#7632.
As discussed in #7634, it can be quite challenging for users to intuit the mental model of how states now work.
## Solution
Rather than change the behavior of the `OnUpdate` system set, instead work on making sure it's easy to understand what's going on.
Two things have been done:
1. Remove the `.on_update` method from our bevy of system building traits. This was special-cased and made states feel much more magical than they need to.
2. Improve the docs for the `OnUpdate` system set.
# Objective
- Fixes: #7187
Since avoiding the `SRes::into_inner` call does not seem to be possible, this PR tries to at least document its usage.
I am not sure if I explained the lifetime issue correctly, please let me know if something is incorrect.
## Solution
- Add information about the `SRes::into_inner` usage on both `RenderCommand` and `Res`
# Objective
Related to #7530.
`EventReader` iterators currently use the default impl for `.count()`, which unnecessarily loops over all unread events.
# Solution
Add specialized impls that mark the `EventReader` as consumed and return the number of unread events.
# Objective
Make the name less verbose without sacrificing clarity.
---
## Migration Guide
*Note for maintainers:* This PR has no breaking changes relative to bevy 0.9. Instead of this PR having its own migration guide, we should just edit the changelog for #6404.
The type `UnsafeWorldCellEntityRef` has been renamed to `UnsafeEntityCell`.
# Objective
Continuation of #7560.
`MutUntyped::last_changed` and `set_last_changed` do not behave as described in their docs.
## Solution
Fix them using the same approach that was used for `Mut<>` in #7560.
# Objective
Make `last_changed` behave as described in its docs.
## Solution
- Return `changed` instead of `last_change_tick`. `last_change_tick` is the system's previous tick and is just used for comparison.
- Update the docs of the similarly named `set_last_changed` (which does correctly interact with `last_change_tick`) to clarify that the two functions touch different data. (I advocate for renaming one or the other if anyone has any good suggestions).
It also might make sense to return a cloned `Tick` instead of `u32`.
---
## Changelog
- Fixed `DetectChanges::last_changed` returning the wrong value.
- Fixed `DetectChangesMut::set_last_changed` not actually updating the `changed` tick.
## Migration Guide
- The incorrect value that was being returned by `DetectChanges::last_changed` was the previous run tick of the system checking for changed values. If you depended on this value, you can get it from the `SystemChangeTick` `SystemParam` instead.
# Objective
Clarify what the function is actually calculating.
The `Tick::is_older_than` function is actually calculating whether the tick is newer than the system's `last_change_tick`, not older. As far as I can tell, the engine was using it correctly everywhere already.
## Solution
- Rename the function.
---
## Changelog
- `Tick::is_older_than` was renamed to `Tick::is_newer_than`. This is not a functional change, since that was what was always being calculated, despite the wrong name.
## Migration Guide
- Replace usages of `Tick::is_older_than` with `Tick::is_newer_than`.
# Objective
Closes#7202
## Solution
~~Introduce a `not` helper to pipe conditions. Opened mostly for discussion. Maybe create an extension trait with `not` method? Please, advice.~~
Introduce `not(condition)` condition that inverses the result of the passed.
---
## Changelog
### Added
- `not` condition.
Small commit to remove an unused resource scoped within a single bevy_ecs unit test. Also rearranged the initialization to follow initialization conventions of surrounding tests. World/Schedule initialization followed by resource initialization.
This change was tested locally with `cargo test`, and `cargo fmt` was run.
Risk should be tiny as change is scoped to a single unit test and very tiny, and I can't see any way that this resource is being used in the test.
Thank you so much!
# Objective
Run conditions are a special type of system that do not modify the world, and which return a bool. Due to the way they are currently implemented, you can *only* use bare function systems as a run condition. Among other things, this prevents the use of system piping with run conditions. This make very basic constructs impossible, such as `my_system.run_if(my_condition.pipe(not))`.
Unblocks a basic solution for #7202.
## Solution
Add the trait `ReadOnlySystem`, which is implemented for any system whose parameters all implement `ReadOnlySystemParam`. Allow any `-> bool` system implementing this trait to be used as a run condition.
---
## Changelog
+ Added the trait `ReadOnlySystem`, which is implemented for any `System` type whose parameters all implement `ReadOnlySystemParam`.
+ Added the function `bevy::ecs::system::assert_is_read_only_system`.
# Objective
Implementing `States` manually is repetitive, so let's not.
One thing I'm unsure of is whether the macro import statement is in the right place.
# Objective
One pattern to increase parallelism is deferred mutation: instead of directly mutating the world (and preventing other systems from running at the same time), you queue up operations to be applied to the world at the end of the stage. The most common example of this pattern uses the `Commands` SystemParam.
In order to avoid the overhead associated with commands, some power users may want to add their own deferred mutation behavior. To do this, you must implement the unsafe trait `SystemParam`, which interfaces with engine internals in a way that we'd like users to be able to avoid.
## Solution
Add the `Deferred<T>` primitive `SystemParam`, which encapsulates the deferred mutation pattern.
This can be combined with other types of `SystemParam` to safely and ergonomically create powerful custom types.
Essentially, this is just a variant of `Local<T>` which can run code at the end of the stage.
This type is used in the engine to derive `Commands` and `ParallelCommands`, which removes a bunch of unsafe boilerplate.
### Example
```rust
use bevy_ecs::system::{Deferred, SystemBuffer};
/// Sends events with a delay, but may run in parallel with other event writers.
#[derive(SystemParam)]
pub struct BufferedEventWriter<'s, E: Event> {
queue: Deferred<'s, EventQueue<E>>,
}
struct EventQueue<E>(Vec<E>);
impl<'s, E: Event> BufferedEventWriter<'s, E> {
/// Queues up an event to be sent at the end of this stage.
pub fn send(&mut self, event: E) {
self.queue.0.push(event);
}
}
// The `SystemBuffer` trait controls how [`Deferred`] gets applied at the end of the stage.
impl<E: Event> SystemBuffer for EventQueue<E> {
fn apply(&mut self, world: &mut World) {
let mut events = world.resource_mut::<Events<E>>();
for e in self.0.drain(..) {
events.send(e);
}
}
}
```
---
## Changelog
+ Added the `SystemParam` type `Deferred<T>`, which can be used to defer `World` mutations. Powered by the new trait `SystemBuffer`.
# Objective
- There is a small perf cost for starting the multithreaded executor.
## Solution
- We can skip that cost when there are zero systems in the schedule. Overall not a big perf boost unless there are a lot of empty schedules that are trying to run, but it is something.
Below is a tracy trace of the run_fixed_update_schedule for many_foxes which has zero systems in it. Yellow is main and red is this pr. The time difference between the peaks of the humps is around 15us.
# Objective
- Implementing logic used by system params and `UnsafeWorldCell` on `&World` is sus since `&World` generally denotes shared read only access to world but this is a lie in the above situations. Move most/all logic that uses `&World` to mean `UnsafeWorldCell` onto `UnsafeWorldCell`
- Add a way to take a `&mut World` out of `UnsafeWorldCell` and use this in `WorldCell`'s `Drop` impl instead of a `UnsafeCell` field
---
## Changelog
- changed some `UnsafeWorldCell` methods to take `self` instead of `&self`/`&mut self` since there is literally no point to them doing that
- `UnsafeWorldCell::world` is now used to get immutable access to the whole world instead of just the metadata which can now be done via `UnsafeWorldCell::world_metadata`
- `UnsafeWorldCell::world_mut` now exists and can be used to get a `&mut World` out of `UnsafeWorldCell`
- removed `UnsafeWorldCell::storages` since that is probably unsound since storages contains the actual component/resource data not just metadata
## Migration guide
N/A none of the breaking changes here make any difference for a 0.9->0.10 transition since `UnsafeWorldCell` did not exist in 0.9
# Objective
NOTE: This depends on #7267 and should not be merged until #7267 is merged. If you are reviewing this before that is merged, I highly recommend viewing the Base Sets commit instead of trying to find my changes amongst those from #7267.
"Default sets" as described by the [Stageless RFC](https://github.com/bevyengine/rfcs/pull/45) have some [unfortunate consequences](https://github.com/bevyengine/bevy/discussions/7365).
## Solution
This adds "base sets" as a variant of `SystemSet`:
A set is a "base set" if `SystemSet::is_base` returns `true`. Typically this will be opted-in to using the `SystemSet` derive:
```rust
#[derive(SystemSet, Clone, Hash, Debug, PartialEq, Eq)]
#[system_set(base)]
enum MyBaseSet {
A,
B,
}
```
**Base sets are exclusive**: a system can belong to at most one "base set". Adding a system to more than one will result in an error. When possible we fail immediately during system-config-time with a nice file + line number. For the more nested graph-ey cases, this will fail at the final schedule build.
**Base sets cannot belong to other sets**: this is where the word "base" comes from
Systems and Sets can only be added to base sets using `in_base_set`. Calling `in_set` with a base set will fail. As will calling `in_base_set` with a normal set.
```rust
app.add_system(foo.in_base_set(MyBaseSet::A))
// X must be a normal set ... base sets cannot be added to base sets
.configure_set(X.in_base_set(MyBaseSet::A))
```
Base sets can still be configured like normal sets:
```rust
app.add_system(MyBaseSet::B.after(MyBaseSet::Ap))
```
The primary use case for base sets is enabling a "default base set":
```rust
schedule.set_default_base_set(CoreSet::Update)
// this will belong to CoreSet::Update by default
.add_system(foo)
// this will override the default base set with PostUpdate
.add_system(bar.in_base_set(CoreSet::PostUpdate))
```
This allows us to build apis that work by default in the standard Bevy style. This is a rough analog to the "default stage" model, but it use the new "stageless sets" model instead, with all of the ordering flexibility (including exclusive systems) that it provides.
---
## Changelog
- Added "base sets" and ported CoreSet to use them.
## Migration Guide
TODO
Huge thanks to @maniwani, @devil-ira, @hymm, @cart, @superdump and @jakobhellermann for the help with this PR.
# Objective
- Followup #6587.
- Minimal integration for the Stageless Scheduling RFC: https://github.com/bevyengine/rfcs/pull/45
## Solution
- [x] Remove old scheduling module
- [x] Migrate new methods to no longer use extension methods
- [x] Fix compiler errors
- [x] Fix benchmarks
- [x] Fix examples
- [x] Fix docs
- [x] Fix tests
## Changelog
### Added
- a large number of methods on `App` to work with schedules ergonomically
- the `CoreSchedule` enum
- `App::add_extract_system` via the `RenderingAppExtension` trait extension method
- the private `prepare_view_uniforms` system now has a public system set for scheduling purposes, called `ViewSet::PrepareUniforms`
### Removed
- stages, and all code that mentions stages
- states have been dramatically simplified, and no longer use a stack
- `RunCriteriaLabel`
- `AsSystemLabel` trait
- `on_hierarchy_reports_enabled` run criteria (now just uses an ad hoc resource checking run condition)
- systems in `RenderSet/Stage::Extract` no longer warn when they do not read data from the main world
- `RunCriteriaLabel`
- `transform_propagate_system_set`: this was a nonstandard pattern that didn't actually provide enough control. The systems are already `pub`: the docs have been updated to ensure that the third-party usage is clear.
### Changed
- `System::default_labels` is now `System::default_system_sets`.
- `App::add_default_labels` is now `App::add_default_sets`
- `CoreStage` and `StartupStage` enums are now `CoreSet` and `StartupSet`
- `App::add_system_set` was renamed to `App::add_systems`
- The `StartupSchedule` label is now defined as part of the `CoreSchedules` enum
- `.label(SystemLabel)` is now referred to as `.in_set(SystemSet)`
- `SystemLabel` trait was replaced by `SystemSet`
- `SystemTypeIdLabel<T>` was replaced by `SystemSetType<T>`
- The `ReportHierarchyIssue` resource now has a public constructor (`new`), and implements `PartialEq`
- Fixed time steps now use a schedule (`CoreSchedule::FixedTimeStep`) rather than a run criteria.
- Adding rendering extraction systems now panics rather than silently failing if no subapp with the `RenderApp` label is found.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied.
- `SceneSpawnerSystem` now runs under `CoreSet::Update`, rather than `CoreStage::PreUpdate.at_end()`.
- `bevy_pbr::add_clusters` is no longer an exclusive system
- the top level `bevy_ecs::schedule` module was replaced with `bevy_ecs::scheduling`
- `tick_global_task_pools_on_main_thread` is no longer run as an exclusive system. Instead, it has been replaced by `tick_global_task_pools`, which uses a `NonSend` resource to force running on the main thread.
## Migration Guide
- Calls to `.label(MyLabel)` should be replaced with `.in_set(MySet)`
- Stages have been removed. Replace these with system sets, and then add command flushes using the `apply_system_buffers` exclusive system where needed.
- The `CoreStage`, `StartupStage, `RenderStage` and `AssetStage` enums have been replaced with `CoreSet`, `StartupSet, `RenderSet` and `AssetSet`. The same scheduling guarantees have been preserved.
- Systems are no longer added to `CoreSet::Update` by default. Add systems manually if this behavior is needed, although you should consider adding your game logic systems to `CoreSchedule::FixedTimestep` instead for more reliable framerate-independent behavior.
- Similarly, startup systems are no longer part of `StartupSet::Startup` by default. In most cases, this won't matter to you.
- For example, `add_system_to_stage(CoreStage::PostUpdate, my_system)` should be replaced with
- `add_system(my_system.in_set(CoreSet::PostUpdate)`
- When testing systems or otherwise running them in a headless fashion, simply construct and run a schedule using `Schedule::new()` and `World::run_schedule` rather than constructing stages
- Run criteria have been renamed to run conditions. These can now be combined with each other and with states.
- Looping run criteria and state stacks have been removed. Use an exclusive system that runs a schedule if you need this level of control over system control flow.
- For app-level control flow over which schedules get run when (such as for rollback networking), create your own schedule and insert it under the `CoreSchedule::Outer` label.
- Fixed timesteps are now evaluated in a schedule, rather than controlled via run criteria. The `run_fixed_timestep` system runs this schedule between `CoreSet::First` and `CoreSet::PreUpdate` by default.
- Command flush points introduced by `AssetStage` have been removed. If you were relying on these, add them back manually.
- Adding extract systems is now typically done directly on the main app. Make sure the `RenderingAppExtension` trait is in scope, then call `app.add_extract_system(my_system)`.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied. You may need to order your movement systems to occur before this system in order to avoid system order ambiguities in culling behavior.
- the `RenderLabel` `AppLabel` was renamed to `RenderApp` for clarity
- `App::add_state` now takes 0 arguments: the starting state is set based on the `Default` impl.
- Instead of creating `SystemSet` containers for systems that run in stages, simply use `.on_enter::<State::Variant>()` or its `on_exit` or `on_update` siblings.
- `SystemLabel` derives should be replaced with `SystemSet`. You will also need to add the `Debug`, `PartialEq`, `Eq`, and `Hash` traits to satisfy the new trait bounds.
- `with_run_criteria` has been renamed to `run_if`. Run criteria have been renamed to run conditions for clarity, and should now simply return a bool.
- States have been dramatically simplified: there is no longer a "state stack". To queue a transition to the next state, call `NextState::set`
## TODO
- [x] remove dead methods on App and World
- [x] add `App::add_system_to_schedule` and `App::add_systems_to_schedule`
- [x] avoid adding the default system set at inappropriate times
- [x] remove any accidental cycles in the default plugins schedule
- [x] migrate benchmarks
- [x] expose explicit labels for the built-in command flush points
- [x] migrate engine code
- [x] remove all mentions of stages from the docs
- [x] verify docs for States
- [x] fix uses of exclusive systems that use .end / .at_start / .before_commands
- [x] migrate RenderStage and AssetStage
- [x] migrate examples
- [x] ensure that transform propagation is exported in a sufficiently public way (the systems are already pub)
- [x] ensure that on_enter schedules are run at least once before the main app
- [x] re-enable opt-in to execution order ambiguities
- [x] revert change to `update_bounds` to ensure it runs in `PostUpdate`
- [x] test all examples
- [x] unbreak directional lights
- [x] unbreak shadows (see 3d_scene, 3d_shape, lighting, transparaency_3d examples)
- [x] game menu example shows loading screen and menu simultaneously
- [x] display settings menu is a blank screen
- [x] `without_winit` example panics
- [x] ensure all tests pass
- [x] SubApp doc test fails
- [x] runs_spawn_local tasks fails
- [x] [Fix panic_when_hierachy_cycle test hanging](https://github.com/alice-i-cecile/bevy/pull/120)
## Points of Difficulty and Controversy
**Reviewers, please give feedback on these and look closely**
1. Default sets, from the RFC, have been removed. These added a tremendous amount of implicit complexity and result in hard to debug scheduling errors. They're going to be tackled in the form of "base sets" by @cart in a followup.
2. The outer schedule controls which schedule is run when `App::update` is called.
3. I implemented `Label for `Box<dyn Label>` for our label types. This enables us to store schedule labels in concrete form, and then later run them. I ran into the same set of problems when working with one-shot systems. We've previously investigated this pattern in depth, and it does not appear to lead to extra indirection with nested boxes.
4. `SubApp::update` simply runs the default schedule once. This sucks, but this whole API is incomplete and this was the minimal changeset.
5. `time_system` and `tick_global_task_pools_on_main_thread` no longer use exclusive systems to attempt to force scheduling order
6. Implemetnation strategy for fixed timesteps
7. `AssetStage` was migrated to `AssetSet` without reintroducing command flush points. These did not appear to be used, and it's nice to remove these bottlenecks.
8. Migration of `bevy_render/lib.rs` and pipelined rendering. The logic here is unusually tricky, as we have complex scheduling requirements.
## Future Work (ideally before 0.10)
- Rename schedule_v3 module to schedule or scheduling
- Add a derive macro to states, and likely a `EnumIter` trait of some form
- Figure out what exactly to do with the "systems added should basically work by default" problem
- Improve ergonomics for working with fixed timesteps and states
- Polish FixedTime API to match Time
- Rebase and merge #7415
- Resolve all internal ambiguities (blocked on better tools, especially #7442)
- Add "base sets" to replace the removed default sets.
# Objective
- Currently exclusive systems and applying buffers run outside of the multithreaded executor and just calls the funtions on the thread the schedule is running on. Stageless changes this to run these using tasks in a scope. Specifically It uses `spawn_on_scope` to run these. For the render thread this is incorrect as calling `spawn_on_scope` there runs tasks on the main thread. It should instead run these on the render thread and only run nonsend systems on the main thread.
## Solution
- Add another executor to `Scope` for spawning tasks on the scope. `spawn_on_scope` now always runs the task on the thread the scope is running on. `spawn_on_external` spawns onto the external executor than is optionally passed in. If None is passed `spawn_on_external` will spawn onto the scope executor.
- Eventually this new machinery will be able to be removed. This will happen once a fix for removing NonSend resources from the world lands. So this is a temporary fix to support stageless.
---
## Changelog
- add a spawn_on_external method to allow spawning on the scope's thread or an external thread
## Migration Guide
> No migration guide. The main thread executor was introduced in pipelined rendering which was merged for 0.10. spawn_on_scope now behaves the same way as on 0.9.
# Objective
- Make the internals of `RemovedComponents` clearer
## Solution
- Add a wrapper around `Entity`, used in `RemovedComponents` as `Events<RemovedComponentsEntity>`
---
## Changelog
- `RemovedComponents` now internally uses an `Events<RemovedComponentsEntity>` instead of an `Events<Entity>`
The `DoubleEndedIterator` impls produce incorrect results on subsequent calls to `iter()` if the iterator is only partially consumed.
The following code shows what happens
```rust
fn next_back_is_bad() {
let mut events = Events::<TestEvent>::default();
events.send(TestEvent { i: 0 });
events.send(TestEvent { i: 1 });
events.send(TestEvent { i: 2 });
let mut reader = events.get_reader();
let mut iter = reader.iter(&events);
assert_eq!(iter.next_back(), Some(&TestEvent { i: 2 }));
assert_eq!(iter.next(), Some(&TestEvent { i: 0 }));
let mut iter = reader.iter(&events);
// `i: 2` event is returned twice! The `i: 1` event is missed.
assert_eq!(iter.next(), Some(&TestEvent { i: 2 }));
assert_eq!(iter.next(), None);
}
```
I don't think this can be fixed without adding some very convoluted bookkeeping.
## Migration Guide
`ManualEventIterator` and `ManualEventIteratorWithId` are no longer `DoubleEndedIterator`s.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Removal events are unwieldy and require some knowledge of when to put systems that need to catch events for them, it is very easy to end up missing one and end up with memory leak-ish issues where you don't clean up after yourself.
## Solution
Consolidate removals with the benefits of `Events<...>` (such as double buffering and per system ticks for reading the events) and reduce the special casing of it, ideally I was hoping to move the removals to a `Resource` in the world, but that seems a bit more rough to implement/maintain because of double mutable borrowing issues.
This doesn't go the full length of change detection esque removal detection a la https://github.com/bevyengine/rfcs/pull/44.
Just tries to make the current workflow a bit more user friendly so detecting removals isn't such a scheduling nightmare.
---
## Changelog
- RemovedComponents<T> is now backed by an `Events<Entity>` for the benefits of double buffering.
## Migration Guide
- Add a `mut` for `removed: RemovedComponents<T>` since we are now modifying an event reader internally.
- Iterating over removed components now requires `&mut removed_components` or `removed_components.iter()` instead of `&removed_components`.
# Objective
The trait method `SystemParam::apply` allows a `SystemParam` type to defer world mutations, which is internally used to apply `Commands` at the end of the stage. Any operations that require `&mut World` access must be deferred in this way, since parallel systems do not have exclusive access to the world.
The `ExclusiveSystemParam` trait (added in #6083) has an `apply` method which serves the same purpose. However, deferring mutations in this way does not make sense for exclusive systems since they already have `&mut World` access: there is no need to wait until a hard sync point, as the system *is* a hard sync point. World mutations can and should be performed within the body of the system.
## Solution
Remove the method. There were no implementations of this method in the engine.
---
## Changelog
*Note for maintainers: this changelog makes more sense if it's placed above the one for #6919.*
- Removed the method `ExclusiveSystemParamState::apply`.
## Migration Guide
*Note for maintainers: this migration guide makes more sense if it's placed above the one for #6919.*
The trait method `ExclusiveSystemParamState::apply` has been removed. If you have an exclusive system with buffers that must be applied, you should apply them within the body of the exclusive system.
# Objective
Fixes#7434.
This is my first time contributing to a Rust project, so please let me know if this wasn't the change intended by the linked issue.
## Solution
Adds a test with a system that panics to `bevy_ecs`.
I'm not sure if this is the intended panic message, but this is what the test currently results in:
```
thread 'system::tests::panic_inside_system' panicked at 'called `Option::unwrap()` on a `None` value', /Users/bjorn/workplace/bevy/crates/bevy_tasks/src/task_pool.rs:354:49
```
# Objective
Fix#7447.
The `SystemParam` derive uses the wrong lifetimes for ignored fields.
## Solution
Use type inference instead of explicitly naming the types of ignored fields. This allows the compiler to automatically use the correct lifetime.
# Objective
- Fix panic_when_hierachy_cycle test hanging
- The problem is that the scope only awaits one task at a time in get_results. In stageless this task is the multithreaded executor. That tasks hangs when a system panics and cannot make anymore progress. This wasn't a problem before because the executor was spawned after all the system tasks had been spawned. But in stageless the executor is spawned before all the system tasks are spawned.
## Solution
- We can catch unwind on each system and close the finish channel if one panics. This then causes the receiver end of the finish channel to panic too.
- this might have a small perf impact, but when running many_foxes it seems to be within the noise. So less than 40us.
## Other possible solutions
- It might be possible to fairly poll all the tasks in get_results in the scope. If we could do that then the scope could panic whenever one of tasks panics. It would require a data structure that we could both poll the futures through a shared ref and also push to it. I tried FuturesUnordered, but it requires an exclusive ref to poll it.
- The catch unwind could be moved onto when we create the tasks for scope instead. We would then need something like a oneshot async channel to inform get_results if a task panics.
# Objective
Ability to use `ReflectComponent` methods in dynamic type contexts with no access to `&World`.
This problem occurred to me when wanting to apply reflected types to an entity where the `&World` reference was already consumed by query iterator leaving only `EntityMut`.
## Solution
- Remove redundant `EntityMut` or `EntityRef` lookup from `World` and `Entity` in favor of taking `EntityMut` directly in `ReflectComponentFns`.
- Added `RefectComponent::contains` to determine without panic whether `apply` can be used.
## Changelog
- Changed function signatures of `ReflectComponent` methods, `apply`, `remove`, `contains`, and `reflect`.
## Migration Guide
- Call `World::entity` before calling into the changed `ReflectComponent` methods, most likely user already has a `EntityRef` or `EntityMut` which was being queried redundantly.
# Objective
- Trying to move some of the fixes from https://github.com/bevyengine/bevy/pull/7267 to make that one easier to review
- The MainThreadExecutor is how the render world runs nonsend systems on the main thread for pipelined rendering.
- The multithread executor for stageless wasn't using the MainThreadExecutor.
- MainThreadExecutor was declared in the old executor_parallel module that is getting deleted.
- The way the MainThreadExecutor was getting passed to the scope was actually unsound as the resource could be dropped from the World while the schedule was running
## Solution
- Move MainThreadExecutor to the new multithreaded_executor's file.
- Make the multithreaded executor use the MainThreadExecutor
- Clone the MainThreadExecutor onto the stack and pass that ref in
## Changelog
- Move MainThreadExecutor for stageless migration.
# Objective
- After the multithreaded executor finishes running all the systems, we apply the buffers for any system that hasn't applied it's buffers. This is a courtesy apply for users who forget to order their systems before a apply_system_buffers. When checking stageless, it was found that this apply_system_buffers was running on the executor thread instead of the world's thread. This is a problem because anything with world access should be able to access nonsend resources.
## Solution
- Move the final apply_system_buffers outside of the executor and outside of the scope, so it runs on the same thread that schedule.run is called on.
# Objective
- The stageless executor keeps track of systems that have run, but have not applied their system buffers. The bitset for that was being cloned into apply_system_buffers and cleared in that function, but we need to clear the original version instead of the cloned version
## Solution
- move the clear out of the apply_system_buffers function.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Clearing the reader doesn't require iterating the events. Updating the `last_event_count` of the reader is enough.
I rewrote part of the documentation as some of it was incorrect or harder to understand than necessary.
## Changelog
Added `ManualEventReader::clear()`
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Found while working on #7385.
The struct `EntityMut` has the safety invariant that it's cached `EntityLocation` must always accurately specify where the entity is stored. Thus, any time its location might be invalidated (such as by calling `EntityMut::world_mut` and moving archetypes), the cached location *must* be updated by calling `EntityMut::update_location`.
The method `world_scope` encapsulates this pattern in safe API by requiring world mutations to be done in a closure, after which `update_location` will automatically be called. However, this method has a soundness hole: if a panic occurs within the closure, then `update_location` will never get called. If the panic is caught in an outer scope, then the `EntityMut` will be left with an outdated location, which is undefined behavior.
An example of this can be seen in the unit test `entity_mut_world_scope_panic`, which has been added to this PR as a regression test. Without the other changes in this PR, that test will invoke undefined behavior in safe code.
## Solution
Call `EntityMut::update_location()` from within a `Drop` impl, which ensures that it will get executed even if `EntityMut::world_scope` unwinds.
# Objective
The function `EntityMut::world_scope` is a safe abstraction that allows you to temporarily get mutable access to the underlying `World` of an `EntityMut`. This function is purely stateful, meaning it is not easily possible to return a value from it.
## Solution
Allow returning a computed value from the closure. This is similar to how `World::resource_scope` works.
---
## Changelog
- The function `EntityMut::world_scope` now allows returning a value from the immediately-computed closure.
# Objective
I found several words in code and docs are incorrect. This should be fixed.
## Solution
- Fix several minor typos
Co-authored-by: Chris Ohk <utilforever@gmail.com>
alternative to #5922, implements #5956
builds on top of https://github.com/bevyengine/bevy/pull/6402
# Objective
https://github.com/bevyengine/bevy/issues/5956 goes into more detail, but the TLDR is:
- bevy systems ensure disjoint accesses to resources and components, and for that to work there are methods `World::get_resource_unchecked_mut(&self)`, ..., `EntityRef::get_mut_unchecked(&self)` etc.
- we don't have these unchecked methods for `by_id` variants, so third-party crate authors cannot build their own safe disjoint-access abstractions with these
- having `_unchecked_mut` methods is not great, because in their presence safe code can accidentally violate subtle invariants. Having to go through `world.as_unsafe_world_cell().unsafe_method()` forces you to stop and think about what you want to write in your `// SAFETY` comment.
The alternative is to keep exposing `_unchecked_mut` variants for every operation that we want third-party crates to build upon, but we'd prefer to avoid using these methods alltogether: https://github.com/bevyengine/bevy/pull/5922#issuecomment-1241954543
Also, this is something that **cannot be implemented outside of bevy**, so having either this PR or #5922 as an escape hatch with lots of discouraging comments would be great.
## Solution
- add `UnsafeWorldCell` with `unsafe fn get_resource(&self)`, `unsafe fn get_resource_mut(&self)`
- add `fn World::as_unsafe_world_cell(&mut self) -> UnsafeWorldCell<'_>` (and `as_unsafe_world_cell_readonly(&self)`)
- add `UnsafeWorldCellEntityRef` with `unsafe fn get`, `unsafe fn get_mut` and the other utilities on `EntityRef` (no methods for spawning, despawning, insertion)
- use the `UnsafeWorldCell` abstraction in `ReflectComponent`, `ReflectResource` and `ReflectAsset`, so these APIs are easier to reason about
- remove `World::get_resource_mut_unchecked`, `EntityRef::get_mut_unchecked` and use `unsafe { world.as_unsafe_world_cell().get_mut() }` and `unsafe { world.as_unsafe_world_cell().get_entity(entity)?.get_mut() }` instead
This PR does **not** make use of `UnsafeWorldCell` for anywhere else in `bevy_ecs` such as `SystemParam` or `Query`. That is a much larger change, and I am convinced that having `UnsafeWorldCell` is already useful for third-party crates.
Implemented API:
```rust
struct World { .. }
impl World {
fn as_unsafe_world_cell(&self) -> UnsafeWorldCell<'_>;
}
struct UnsafeWorldCell<'w>(&'w World);
impl<'w> UnsafeWorldCell {
unsafe fn world(&self) -> &World;
fn get_entity(&self) -> UnsafeWorldCellEntityRef<'w>; // returns 'w which is `'self` of the `World::as_unsafe_world_cell(&'w self)`
unsafe fn get_resource<T>(&self) -> Option<&'w T>;
unsafe fn get_resource_by_id(&self, ComponentId) -> Option<&'w T>;
unsafe fn get_resource_mut<T>(&self) -> Option<Mut<'w, T>>;
unsafe fn get_resource_mut_by_id(&self) -> Option<MutUntyped<'w>>;
unsafe fn get_non_send_resource<T>(&self) -> Option<&'w T>;
unsafe fn get_non_send_resource_mut<T>(&self) -> Option<Mut<'w, T>>>;
// not included: remove, remove_resource, despawn, anything that might change archetypes
}
struct UnsafeWorldCellEntityRef<'w> { .. }
impl UnsafeWorldCellEntityRef<'w> {
unsafe fn get<T>(&self, Entity) -> Option<&'w T>;
unsafe fn get_by_id(&self, Entity, ComponentId) -> Option<Ptr<'w>>;
unsafe fn get_mut<T>(&self, Entity) -> Option<Mut<'w, T>>;
unsafe fn get_mut_by_id(&self, Entity, ComponentId) -> Option<MutUntyped<'w>>;
unsafe fn get_change_ticks<T>(&self, Entity) -> Option<Mut<'w, T>>;
// fn id, archetype, contains, contains_id, containts_type_id
}
```
<details>
<summary>UnsafeWorldCell docs</summary>
Variant of the [`World`] where resource and component accesses takes a `&World`, and the responsibility to avoid
aliasing violations are given to the caller instead of being checked at compile-time by rust's unique XOR shared rule.
### Rationale
In rust, having a `&mut World` means that there are absolutely no other references to the safe world alive at the same time,
without exceptions. Not even unsafe code can change this.
But there are situations where careful shared mutable access through a type is possible and safe. For this, rust provides the [`UnsafeCell`](std::cell::UnsafeCell)
escape hatch, which allows you to get a `*mut T` from a `&UnsafeCell<T>` and around which safe abstractions can be built.
Access to resources and components can be done uniquely using [`World::resource_mut`] and [`World::entity_mut`], and shared using [`World::resource`] and [`World::entity`].
These methods use lifetimes to check at compile time that no aliasing rules are being broken.
This alone is not enough to implement bevy systems where multiple systems can access *disjoint* parts of the world concurrently. For this, bevy stores all values of
resources and components (and [`ComponentTicks`](crate::component::ComponentTicks)) in [`UnsafeCell`](std::cell::UnsafeCell)s, and carefully validates disjoint access patterns using
APIs like [`System::component_access`](crate::system::System::component_access).
A system then can be executed using [`System::run_unsafe`](crate::system::System::run_unsafe) with a `&World` and use methods with interior mutability to access resource values.
access resource values.
### Example Usage
[`UnsafeWorldCell`] can be used as a building block for writing APIs that safely allow disjoint access into the world.
In the following example, the world is split into a resource access half and a component access half, where each one can
safely hand out mutable references.
```rust
use bevy_ecs::world::World;
use bevy_ecs::change_detection::Mut;
use bevy_ecs::system::Resource;
use bevy_ecs::world::unsafe_world_cell_world::UnsafeWorldCell;
// INVARIANT: existance of this struct means that users of it are the only ones being able to access resources in the world
struct OnlyResourceAccessWorld<'w>(UnsafeWorldCell<'w>);
// INVARIANT: existance of this struct means that users of it are the only ones being able to access components in the world
struct OnlyComponentAccessWorld<'w>(UnsafeWorldCell<'w>);
impl<'w> OnlyResourceAccessWorld<'w> {
fn get_resource_mut<T: Resource>(&mut self) -> Option<Mut<'w, T>> {
// SAFETY: resource access is allowed through this UnsafeWorldCell
unsafe { self.0.get_resource_mut::<T>() }
}
}
// impl<'w> OnlyComponentAccessWorld<'w> {
// ...
// }
// the two interior mutable worlds borrow from the `&mut World`, so it cannot be accessed while they are live
fn split_world_access(world: &mut World) -> (OnlyResourceAccessWorld<'_>, OnlyComponentAccessWorld<'_>) {
let resource_access = OnlyResourceAccessWorld(unsafe { world.as_unsafe_world_cell() });
let component_access = OnlyComponentAccessWorld(unsafe { world.as_unsafe_world_cell() });
(resource_access, component_access)
}
```
</details>
# Objective
`add_system(system)` without any `.in_set` configuration should land in `CoreSet::Update`.
We check that the sets are empty, but for systems there is always the `SystemTypeset`.
## Solution
- instead of `is_empty()`, check that the only set it the `SystemTypeSet`
# Objective
`bevy_ecs/system_param.rs` contains many seemingly-arbitrary struct definitions which serve as compile tests.
## Solution
Add a comment to each one, linking the issue or PR that motivated its addition.
# Objective
- `Components::resource_id` doesn't exist. Like `Components::component_id` but for resources.
## Solution
- Created `Components::resource_id` and added some docs.
---
## Changelog
- Added `Components::resource_id`.
- Changed `World::init_resource` to return the generated `ComponentId`.
- Changed `World::init_non_send_resource` to return the generated `ComponentId`.
# Objective
Fixes#3184. Fixes#6640. Fixes#4798. Using `Query::par_for_each(_mut)` currently requires a `batch_size` parameter, which affects how it chunks up large archetypes and tables into smaller chunks to run in parallel. Tuning this value is difficult, as the performance characteristics entirely depends on the state of the `World` it's being run on. Typically, users will just use a flat constant and just tune it by hand until it performs well in some benchmarks. However, this is both error prone and risks overfitting the tuning on that benchmark.
This PR proposes a naive automatic batch-size computation based on the current state of the `World`.
## Background
`Query::par_for_each(_mut)` schedules a new Task for every archetype or table that it matches. Archetypes/tables larger than the batch size are chunked into smaller tasks. Assuming every entity matched by the query has an identical workload, this makes the worst case scenario involve using a batch size equal to the size of the largest matched archetype or table. Conversely, a batch size of `max {archetype, table} size / thread count * COUNT_PER_THREAD` is likely the sweetspot where the overhead of scheduling tasks is minimized, at least not without grouping small archetypes/tables together.
There is also likely a strict minimum batch size below which the overhead of scheduling these tasks is heavier than running the entire thing single-threaded.
## Solution
- [x] Remove the `batch_size` from `Query(State)::par_for_each` and friends.
- [x] Add a check to compute `batch_size = max {archeytpe/table} size / thread count * COUNT_PER_THREAD`
- [x] ~~Panic if thread count is 0.~~ Defer to `for_each` if the thread count is 1 or less.
- [x] Early return if there is no matched table/archetype.
- [x] Add override option for users have queries that strongly violate the initial assumption that all iterated entities have an equal workload.
---
## Changelog
Changed: `Query::par_for_each(_mut)` has been changed to `Query::par_iter(_mut)` and will now automatically try to produce a batch size for callers based on the current `World` state.
## Migration Guide
The `batch_size` parameter for `Query(State)::par_for_each(_mut)` has been removed. These calls will automatically compute a batch size for you. Remove these parameters from all calls to these functions.
Before:
```rust
fn parallel_system(query: Query<&MyComponent>) {
query.par_for_each(32, |comp| {
...
});
}
```
After:
```rust
fn parallel_system(query: Query<&MyComponent>) {
query.par_iter().for_each(|comp| {
...
});
}
```
Co-authored-by: Arnav Choubey <56453634+x-52@users.noreply.github.com>
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Corey Farwell <coreyf@rwell.org>
Co-authored-by: Aevyrie <aevyrie@gmail.com>
# Objective
- Implement pipelined rendering
- Fixes#5082
- Fixes#4718
## User Facing Description
Bevy now implements piplelined rendering! Pipelined rendering allows the app logic and rendering logic to run on different threads leading to large gains in performance.
*tracy capture of many_foxes example*
To use pipelined rendering, you just need to add the `PipelinedRenderingPlugin`. If you're using `DefaultPlugins` then it will automatically be added for you on all platforms except wasm. Bevy does not currently support multithreading on wasm which is needed for this feature to work. If you aren't using `DefaultPlugins` you can add the plugin manually.
```rust
use bevy::prelude::*;
use bevy::render::pipelined_rendering::PipelinedRenderingPlugin;
fn main() {
App::new()
// whatever other plugins you need
.add_plugin(RenderPlugin)
// needs to be added after RenderPlugin
.add_plugin(PipelinedRenderingPlugin)
.run();
}
```
If for some reason pipelined rendering needs to be removed. You can also disable the plugin the normal way.
```rust
use bevy::prelude::*;
use bevy::render::pipelined_rendering::PipelinedRenderingPlugin;
fn main() {
App::new.add_plugins(DefaultPlugins.build().disable::<PipelinedRenderingPlugin>());
}
```
### A setup function was added to plugins
A optional plugin lifecycle function was added to the `Plugin trait`. This function is called after all plugins have been built, but before the app runner is called. This allows for some final setup to be done. In the case of pipelined rendering, the function removes the sub app from the main app and sends it to the render thread.
```rust
struct MyPlugin;
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
}
// optional function
fn setup(&self, app: &mut App) {
// do some final setup before runner is called
}
}
```
### A Stage for Frame Pacing
In the `RenderExtractApp` there is a stage labelled `BeforeIoAfterRenderStart` that systems can be added to. The specific use case for this stage is for a frame pacing system that can delay the start of main app processing in render bound apps to reduce input latency i.e. "frame pacing". This is not currently built into bevy, but exists as `bevy`
```text
|-------------------------------------------------------------------|
| | BeforeIoAfterRenderStart | winit events | main schedule |
| extract |---------------------------------------------------------|
| | extract commands | rendering schedule |
|-------------------------------------------------------------------|
```
### Small API additions
* `Schedule::remove_stage`
* `App::insert_sub_app`
* `App::remove_sub_app`
* `TaskPool::scope_with_executor`
## Problems and Solutions
### Moving render app to another thread
Most of the hard bits for this were done with the render redo. This PR just sends the render app back and forth through channels which seems to work ok. I originally experimented with using a scope to run the render task. It was cuter, but that approach didn't allow render to start before i/o processing. So I switched to using channels. There is much complexity in the coordination that needs to be done, but it's worth it. By moving rendering during i/o processing the frame times should be much more consistent in render bound apps. See https://github.com/bevyengine/bevy/issues/4691.
### Unsoundness with Sending World with NonSend resources
Dropping !Send things on threads other than the thread they were spawned on is considered unsound. The render world doesn't have any nonsend resources. So if we tell the users to "pretty please don't spawn nonsend resource on the render world", we can avoid this problem.
More seriously there is this https://github.com/bevyengine/bevy/pull/6534 pr, which patches the unsoundness by aborting the app if a nonsend resource is dropped on the wrong thread. ~~That PR should probably be merged before this one.~~ For a longer term solution we have this discussion going https://github.com/bevyengine/bevy/discussions/6552.
### NonSend Systems in render world
The render world doesn't have any !Send resources, but it does have a non send system. While Window is Send, winit does have some API's that can only be accessed on the main thread. `prepare_windows` in the render schedule thus needs to be scheduled on the main thread. Currently we run nonsend systems by running them on the thread the TaskPool::scope runs on. When we move render to another thread this no longer works.
To fix this, a new `scope_with_executor` method was added that takes a optional `TheadExecutor` that can only be ticked on the thread it was initialized on. The render world then holds a `MainThreadExecutor` resource which can be passed to the scope in the parallel executor that it uses to spawn it's non send systems on.
### Scopes executors between render and main should not share tasks
Since the render world and the app world share the `ComputeTaskPool`. Because `scope` has executors for the ComputeTaskPool a system from the main world could run on the render thread or a render system could run on the main thread. This can cause performance problems because it can delay a stage from finishing. See https://github.com/bevyengine/bevy/pull/6503#issuecomment-1309791442 for more details.
To avoid this problem, `TaskPool::scope` has been changed to not tick the ComputeTaskPool when it's used by the parallel executor. In the future when we move closer to the 1 thread to 1 logical core model we may want to overprovide threads, because the render and main app threads don't do much when executing the schedule.
## Performance
My machine is Windows 11, AMD Ryzen 5600x, RX 6600
### Examples
#### This PR with pipelining vs Main
> Note that these were run on an older version of main and the performance profile has probably changed due to optimizations
Seeing a perf gain from 29% on many lights to 7% on many sprites.
<html>
<body>
<!--StartFragment--><google-sheets-html-origin>
| percent | | | Diff | | | Main | | | PR | |
-- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | --
tracy frame time | mean | median | sigma | mean | median | sigma | mean | median | sigma | mean | median | sigma
many foxes | 27.01% | 27.34% | -47.09% | 1.58 | 1.55 | -1.78 | 5.85 | 5.67 | 3.78 | 4.27 | 4.12 | 5.56
many lights | 29.35% | 29.94% | -10.84% | 3.02 | 3.03 | -0.57 | 10.29 | 10.12 | 5.26 | 7.27 | 7.09 | 5.83
many animated sprites | 13.97% | 15.69% | 14.20% | 3.79 | 4.17 | 1.41 | 27.12 | 26.57 | 9.93 | 23.33 | 22.4 | 8.52
3d scene | 25.79% | 26.78% | 7.46% | 0.49 | 0.49 | 0.15 | 1.9 | 1.83 | 2.01 | 1.41 | 1.34 | 1.86
many cubes | 11.97% | 11.28% | 14.51% | 1.93 | 1.78 | 1.31 | 16.13 | 15.78 | 9.03 | 14.2 | 14 | 7.72
many sprites | 7.14% | 9.42% | -85.42% | 1.72 | 2.23 | -6.15 | 24.09 | 23.68 | 7.2 | 22.37 | 21.45 | 13.35
<!--EndFragment-->
</body>
</html>
#### This PR with pipelining disabled vs Main
Mostly regressions here. I don't think this should be a problem as users that are disabling pipelined rendering are probably running single threaded and not using the parallel executor. The regression is probably mostly due to the switch to use `async_executor::run` instead of `try_tick` and also having one less thread to run systems on. I'll do a writeup on why switching to `run` causes regressions, so we can try to eventually fix it. Using try_tick causes issues when pipeline rendering is enable as seen [here](https://github.com/bevyengine/bevy/pull/6503#issuecomment-1380803518)
<html>
<body>
<!--StartFragment--><google-sheets-html-origin>
| percent | | | Diff | | | Main | | | PR no pipelining | |
-- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | --
tracy frame time | mean | median | sigma | mean | median | sigma | mean | median | sigma | mean | median | sigma
many foxes | -3.72% | -4.42% | -1.07% | -0.21 | -0.24 | -0.04 | 5.64 | 5.43 | 3.74 | 5.85 | 5.67 | 3.78
many lights | 0.29% | -0.30% | 4.75% | 0.03 | -0.03 | 0.25 | 10.29 | 10.12 | 5.26 | 10.26 | 10.15 | 5.01
many animated sprites | 0.22% | 1.81% | -2.72% | 0.06 | 0.48 | -0.27 | 27.12 | 26.57 | 9.93 | 27.06 | 26.09 | 10.2
3d scene | -15.79% | -14.75% | -31.34% | -0.3 | -0.27 | -0.63 | 1.9 | 1.83 | 2.01 | 2.2 | 2.1 | 2.64
many cubes | -2.85% | -3.30% | 0.00% | -0.46 | -0.52 | 0 | 16.13 | 15.78 | 9.03 | 16.59 | 16.3 | 9.03
many sprites | 2.49% | 2.41% | 0.69% | 0.6 | 0.57 | 0.05 | 24.09 | 23.68 | 7.2 | 23.49 | 23.11 | 7.15
<!--EndFragment-->
</body>
</html>
### Benchmarks
Mostly the same except empty_systems has got a touch slower. The maybe_pipelining+1 column has the compute task pool with an extra thread over default added. This is because pipelining loses one thread over main to execute systems on, since the main thread no longer runs normal systems.
<details>
<summary>Click Me</summary>
```text
group main maybe-pipelining+1
----- ------------------------- ------------------
busy_systems/01x_entities_03_systems 1.07 30.7±1.32µs ? ?/sec 1.00 28.6±1.35µs ? ?/sec
busy_systems/01x_entities_06_systems 1.10 52.1±1.10µs ? ?/sec 1.00 47.2±1.08µs ? ?/sec
busy_systems/01x_entities_09_systems 1.00 74.6±1.36µs ? ?/sec 1.00 75.0±1.93µs ? ?/sec
busy_systems/01x_entities_12_systems 1.03 100.6±6.68µs ? ?/sec 1.00 98.0±1.46µs ? ?/sec
busy_systems/01x_entities_15_systems 1.11 128.5±3.53µs ? ?/sec 1.00 115.5±1.02µs ? ?/sec
busy_systems/02x_entities_03_systems 1.16 50.4±2.56µs ? ?/sec 1.00 43.5±3.00µs ? ?/sec
busy_systems/02x_entities_06_systems 1.00 87.1±1.27µs ? ?/sec 1.05 91.5±7.15µs ? ?/sec
busy_systems/02x_entities_09_systems 1.04 139.9±6.37µs ? ?/sec 1.00 134.0±1.06µs ? ?/sec
busy_systems/02x_entities_12_systems 1.05 179.2±3.47µs ? ?/sec 1.00 170.1±3.17µs ? ?/sec
busy_systems/02x_entities_15_systems 1.01 219.6±3.75µs ? ?/sec 1.00 218.1±2.55µs ? ?/sec
busy_systems/03x_entities_03_systems 1.10 70.6±2.33µs ? ?/sec 1.00 64.3±0.69µs ? ?/sec
busy_systems/03x_entities_06_systems 1.02 130.2±3.11µs ? ?/sec 1.00 128.0±1.34µs ? ?/sec
busy_systems/03x_entities_09_systems 1.00 195.0±10.11µs ? ?/sec 1.00 194.8±1.41µs ? ?/sec
busy_systems/03x_entities_12_systems 1.01 261.7±4.05µs ? ?/sec 1.00 259.8±4.11µs ? ?/sec
busy_systems/03x_entities_15_systems 1.00 318.0±3.04µs ? ?/sec 1.06 338.3±20.25µs ? ?/sec
busy_systems/04x_entities_03_systems 1.00 82.9±0.63µs ? ?/sec 1.02 84.3±0.63µs ? ?/sec
busy_systems/04x_entities_06_systems 1.01 181.7±3.65µs ? ?/sec 1.00 179.8±1.76µs ? ?/sec
busy_systems/04x_entities_09_systems 1.04 265.0±4.68µs ? ?/sec 1.00 255.3±1.98µs ? ?/sec
busy_systems/04x_entities_12_systems 1.00 335.9±3.00µs ? ?/sec 1.05 352.6±15.84µs ? ?/sec
busy_systems/04x_entities_15_systems 1.00 418.6±10.26µs ? ?/sec 1.08 450.2±39.58µs ? ?/sec
busy_systems/05x_entities_03_systems 1.07 114.3±0.95µs ? ?/sec 1.00 106.9±1.52µs ? ?/sec
busy_systems/05x_entities_06_systems 1.08 229.8±2.90µs ? ?/sec 1.00 212.3±4.18µs ? ?/sec
busy_systems/05x_entities_09_systems 1.03 329.3±1.99µs ? ?/sec 1.00 319.2±2.43µs ? ?/sec
busy_systems/05x_entities_12_systems 1.06 454.7±6.77µs ? ?/sec 1.00 430.1±3.58µs ? ?/sec
busy_systems/05x_entities_15_systems 1.03 554.6±6.15µs ? ?/sec 1.00 538.4±23.87µs ? ?/sec
contrived/01x_entities_03_systems 1.00 14.0±0.15µs ? ?/sec 1.08 15.1±0.21µs ? ?/sec
contrived/01x_entities_06_systems 1.04 28.5±0.37µs ? ?/sec 1.00 27.4±0.44µs ? ?/sec
contrived/01x_entities_09_systems 1.00 41.5±4.38µs ? ?/sec 1.02 42.2±2.24µs ? ?/sec
contrived/01x_entities_12_systems 1.06 55.9±1.49µs ? ?/sec 1.00 52.6±1.36µs ? ?/sec
contrived/01x_entities_15_systems 1.02 68.0±2.00µs ? ?/sec 1.00 66.5±0.78µs ? ?/sec
contrived/02x_entities_03_systems 1.03 25.2±0.38µs ? ?/sec 1.00 24.6±0.52µs ? ?/sec
contrived/02x_entities_06_systems 1.00 46.3±0.49µs ? ?/sec 1.04 48.1±4.13µs ? ?/sec
contrived/02x_entities_09_systems 1.02 70.4±0.99µs ? ?/sec 1.00 68.8±1.04µs ? ?/sec
contrived/02x_entities_12_systems 1.06 96.8±1.49µs ? ?/sec 1.00 91.5±0.93µs ? ?/sec
contrived/02x_entities_15_systems 1.02 116.2±0.95µs ? ?/sec 1.00 114.2±1.42µs ? ?/sec
contrived/03x_entities_03_systems 1.00 33.2±0.38µs ? ?/sec 1.01 33.6±0.45µs ? ?/sec
contrived/03x_entities_06_systems 1.00 62.4±0.73µs ? ?/sec 1.01 63.3±1.05µs ? ?/sec
contrived/03x_entities_09_systems 1.02 96.4±0.85µs ? ?/sec 1.00 94.8±3.02µs ? ?/sec
contrived/03x_entities_12_systems 1.01 126.3±4.67µs ? ?/sec 1.00 125.6±2.27µs ? ?/sec
contrived/03x_entities_15_systems 1.03 160.2±9.37µs ? ?/sec 1.00 156.0±1.53µs ? ?/sec
contrived/04x_entities_03_systems 1.02 41.4±3.39µs ? ?/sec 1.00 40.5±0.52µs ? ?/sec
contrived/04x_entities_06_systems 1.00 78.9±1.61µs ? ?/sec 1.02 80.3±1.06µs ? ?/sec
contrived/04x_entities_09_systems 1.02 121.8±3.97µs ? ?/sec 1.00 119.2±1.46µs ? ?/sec
contrived/04x_entities_12_systems 1.00 157.8±1.48µs ? ?/sec 1.01 160.1±1.72µs ? ?/sec
contrived/04x_entities_15_systems 1.00 197.9±1.47µs ? ?/sec 1.08 214.2±34.61µs ? ?/sec
contrived/05x_entities_03_systems 1.00 49.1±0.33µs ? ?/sec 1.01 49.7±0.75µs ? ?/sec
contrived/05x_entities_06_systems 1.00 95.0±0.93µs ? ?/sec 1.00 94.6±0.94µs ? ?/sec
contrived/05x_entities_09_systems 1.01 143.2±1.68µs ? ?/sec 1.00 142.2±2.00µs ? ?/sec
contrived/05x_entities_12_systems 1.00 191.8±2.03µs ? ?/sec 1.01 192.7±7.88µs ? ?/sec
contrived/05x_entities_15_systems 1.02 239.7±3.71µs ? ?/sec 1.00 235.8±4.11µs ? ?/sec
empty_systems/000_systems 1.01 47.8±0.67ns ? ?/sec 1.00 47.5±2.02ns ? ?/sec
empty_systems/001_systems 1.00 1743.2±126.14ns ? ?/sec 1.01 1761.1±70.10ns ? ?/sec
empty_systems/002_systems 1.01 2.2±0.04µs ? ?/sec 1.00 2.2±0.02µs ? ?/sec
empty_systems/003_systems 1.02 2.7±0.09µs ? ?/sec 1.00 2.7±0.16µs ? ?/sec
empty_systems/004_systems 1.00 3.1±0.11µs ? ?/sec 1.00 3.1±0.24µs ? ?/sec
empty_systems/005_systems 1.00 3.5±0.05µs ? ?/sec 1.11 3.9±0.70µs ? ?/sec
empty_systems/010_systems 1.00 5.5±0.12µs ? ?/sec 1.03 5.7±0.17µs ? ?/sec
empty_systems/015_systems 1.00 7.9±0.19µs ? ?/sec 1.06 8.4±0.16µs ? ?/sec
empty_systems/020_systems 1.00 10.4±1.25µs ? ?/sec 1.02 10.6±0.18µs ? ?/sec
empty_systems/025_systems 1.00 12.4±0.39µs ? ?/sec 1.14 14.1±1.07µs ? ?/sec
empty_systems/030_systems 1.00 15.1±0.39µs ? ?/sec 1.05 15.8±0.62µs ? ?/sec
empty_systems/035_systems 1.00 16.9±0.47µs ? ?/sec 1.07 18.0±0.37µs ? ?/sec
empty_systems/040_systems 1.00 19.3±0.41µs ? ?/sec 1.05 20.3±0.39µs ? ?/sec
empty_systems/045_systems 1.00 22.4±1.67µs ? ?/sec 1.02 22.9±0.51µs ? ?/sec
empty_systems/050_systems 1.00 24.4±1.67µs ? ?/sec 1.01 24.7±0.40µs ? ?/sec
empty_systems/055_systems 1.05 28.6±5.27µs ? ?/sec 1.00 27.2±0.70µs ? ?/sec
empty_systems/060_systems 1.02 29.9±1.64µs ? ?/sec 1.00 29.3±0.66µs ? ?/sec
empty_systems/065_systems 1.02 32.7±3.15µs ? ?/sec 1.00 32.1±0.98µs ? ?/sec
empty_systems/070_systems 1.00 33.0±1.42µs ? ?/sec 1.03 34.1±1.44µs ? ?/sec
empty_systems/075_systems 1.00 34.8±0.89µs ? ?/sec 1.04 36.2±0.70µs ? ?/sec
empty_systems/080_systems 1.00 37.0±1.82µs ? ?/sec 1.05 38.7±1.37µs ? ?/sec
empty_systems/085_systems 1.00 38.7±0.76µs ? ?/sec 1.05 40.8±0.83µs ? ?/sec
empty_systems/090_systems 1.00 41.5±1.09µs ? ?/sec 1.04 43.2±0.82µs ? ?/sec
empty_systems/095_systems 1.00 43.6±1.10µs ? ?/sec 1.04 45.2±0.99µs ? ?/sec
empty_systems/100_systems 1.00 46.7±2.27µs ? ?/sec 1.03 48.1±1.25µs ? ?/sec
```
</details>
## Migration Guide
### App `runner` and SubApp `extract` functions are now required to be Send
This was changed to enable pipelined rendering. If this breaks your use case please report it as these new bounds might be able to be relaxed.
## ToDo
* [x] redo benchmarking
* [x] reinvestigate the perf of the try_tick -> run change for task pool scope
# Objective
- Safety comments for the `CommandQueue` type are quite sparse and very imprecise. Sometimes, they are right for the wrong reasons or use circular reasoning.
## Solution
- Document previously-implicit safety invariants.
- Rewrite safety comments to actually reflect the specific invariants of each operation.
- Use `OwningPtr` instead of raw pointers, to encode an invariant in the type system instead of via comments.
- Use typed pointer methods when possible to increase reliability.
---
## Changelog
+ Added the function `OwningPtr::read_unaligned`.
# Objective
Repeated calls to `init_non_send_resource` currently overwrite the old value because the wrong storage is being checked.
## Solution
Use the correct storage. Add some tests.
## Notes
Without the fix, the new test fails with
```
thread 'world::tests::init_non_send_resource_does_not_overwrite' panicked at 'assertion failed: `(left == right)`
left: `1`,
right: `0`', crates/bevy_ecs/src/world/mod.rs:2267:9
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
test world::tests::init_non_send_resource_does_not_overwrite ... FAILED
```
This was introduced by #7174 and it seems like a fairly straightforward oopsie.
# Objective
I was reading through the bevy_ecs code, trying to understand how everything works.
I was getting a bit confused when reading the doc comment for the `new_archetype` function; it looks like it doesn't create a new archetype but instead updates some internal state in the SystemParam to facility QueryIteration.
(I still couldn't find where a new archetype was actually created)
## Solution
- Adding a doc comment with a more correct explanation.
If it's deemed correct, I can also update the doc-comment for the other `new_archetype` calls
# Objective
Speed up the render phase of rendering. An extension of #6885.
`SystemState::get` increments the `World`'s change tick atomically every time it's called. This is notably more expensive than a unsynchronized increment, even without contention. It also updates the archetypes, even when there has been nothing to update when it's called repeatedly.
## Solution
Piggyback off of #6885. Split `SystemState::validate_world_and_update_archetypes` into `SystemState::validate_world` and `SystemState::update_archetypes`, and make the later `pub`. Then create safe variants of `SystemState::get_unchecked_manual` that still validate the `World` but do not update archetypes and do not increment the change tick using `World::read_change_tick` and `World::change_tick`. Update `RenderCommandState` to call `SystemState::update_archetypes` in `Draw::prepare` and `SystemState::get_manual` in `Draw::draw`.
## Performance
There's a slight perf benefit (~2%) for `main_opaque_pass_3d` on `many_foxes` (340.39 us -> 333.32 us)
## Alternatives
We can change `SystemState::get` to not increment the `World`'s change tick. Though this would still put updating the archetypes and an atomic read on the hot-path.
---
## Changelog
Added: `SystemState::get_manual`
Added: `SystemState::get_manual_mut`
Added: `SystemState::update_archetypes`
# Objective
- Fixes#3158
## Solution
- clear columns
My implementation of `clear_resources` do not remove the components itself but it clears the columns that keeps the resource data. I'm not sure if the issue meant to clear all resources, even the components and component ids (which I'm not sure if it's possible)
Co-authored-by: 2ne1ugly <47616772+2ne1ugly@users.noreply.github.com>
# Objective
The trait `ReadOnlySystemParam` is not implemented for `Option<NonSend<>>`, even though it should be.
Follow-up to #7243. This fixes another mistake made in #6919.
## Solution
Add the missing impl.
# Objective
The trait `ReadOnlySystemParam` is implemented for `NonSendMut`, when it should not be. This mistake was made in #6919.
## Solution
Remove the incorrect impl.
# Objective
Complete the first part of the migration detailed in bevyengine/rfcs#45.
## Solution
Add all the new stuff.
### TODO
- [x] Impl tuple methods.
- [x] Impl chaining.
- [x] Port ambiguity detection.
- [x] Write docs.
- [x] ~~Write more tests.~~(will do later)
- [ ] Write changelog and examples here?
- [x] ~~Replace `petgraph`.~~ (will do later)
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: Michael Hsu <mike.hsu@gmail.com>
Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
# Objective
- We rely on the construction of `EntityRef` to be valid elsewhere in unsafe code. This construction is not checked (for performance reasons), and thus this private method must be unsafe.
- Fixes#7218.
## Solution
- Make the method unsafe.
- Add safety docs.
- Improve safety docs slightly for the sibling `EntityMut::new`.
- Add debug asserts to start to verify these assumptions in debug mode.
## Context for reviewers
I attempted to verify the `EntityLocation` more thoroughly, but this turned out to be more work than expected. I've spun that off into #7221 as a result.
# Objective
The usages of the unsafe function `byte_add` are not properly documented.
Follow-up to #7151.
## Solution
Add safety comments to each call-site.
# Objective
- The function `BlobVec::replace_unchecked` has informal use of safety comments.
- This function does strange things with `OwningPtr` in order to get around the borrow checker.
## Solution
- Put safety comments in front of each unsafe operation. Describe the specific invariants of each operation and how they apply here.
- Added a guard type `OnDrop`, which is used to simplify ownership transfer in case of a panic.
---
## Changelog
+ Added the guard type `bevy_utils::OnDrop`.
+ Added conversions from `Ptr`, `PtrMut`, and `OwningPtr` to `NonNull<u8>`.
# Objective
Fix#5248.
## Solution
Support `In<T>` parameters and allow returning arbitrary types in exclusive systems.
---
## Changelog
- Exclusive systems may now be used with system piping.
## Migration Guide
Exclusive systems (systems that access `&mut World`) now support system piping, so the `ExclusiveSystemParamFunction` trait now has generics for the `In`put and `Out`put types.
```rust
// Before
fn my_generic_system<T, Param>(system_function: T)
where T: ExclusiveSystemParamFunction<Param>
{ ... }
// After
fn my_generic_system<T, In, Out, Param>(system_function: T)
where T: ExclusiveSystemParamFunction<In, Out, Param>
{ ... }
```
# Objective
There are some utility functions for actually working with `Storages` inside `entity_ref.rs` that are used both for `EntityRef/EntityMut` and `World`, with a `// TODO: move to Storages`.
This PR moves them to private methods on `World`, because that's the safest API boundary. On `Storages` you would need to ensure that you pass `Components` from the same world.
## Solution
- move get_component[_with_type], get_ticks[_with_type], get_component_and_ticks[_with_type] to `World` (still pub(crate))
- replace `pub use entity_ref::*;` with `pub use entity_ref::{EntityRef, EntityMut}` and qualified `entity_ref::get_mut[_by_id]` in `world.rs`
- add safety comments to a bunch of methods
# Objective
* `World::init_resource` and `World::get_resource_or_insert_with` are implemented naively, and as such they perform duplicate `TypeId -> ComponentId` lookups.
* `World::get_resource_or_insert_with` contains an additional duplicate `ComponentId -> ResourceData` lookup.
* This function also contains an unnecessary panic branch, which we rely on the optimizer to be able to remove.
## Solution
Implement the functions using engine-internal code, instead of combining high-level functions. This allows computed variables to persist across different branches, instead of being recomputed.
# Objective
Following #6681, both `TableRow` and `TableId` are now part of `EntityLocation`. However, the safety invariant on `EntityLocation` requires that all of the constituent fields are `repr(transprent)` or `repr(C)` and the bit pattern of all 1s must be valid. This is not true for `TableRow` and `TableId` currently.
## Solution
Mark `TableRow` and `TableId` to satisfy the safety requirement. Add safety comments on `ArchetypeId`, `ArchetypeRow`, `TableId` and `TableRow`.
# Objective
Improve safety testing when using `bevy_ptr` types. This is a follow-up to #7113.
## Solution
Add a debug-only assertion that pointers are aligned when casting to a concrete type. This should very quickly catch any unsoundness from unaligned pointers, even without miri. However, this can have a large negative perf impact on debug builds.
---
## Changelog
Added: `Ptr::deref` will now panic in debug builds if the pointer is not aligned.
Added: `PtrMut::deref_mut` will now panic in debug builds if the pointer is not aligned.
Added: `OwningPtr::read` will now panic in debug builds if the pointer is not aligned.
Added: `OwningPtr::drop_as` will now panic in debug builds if the pointer is not aligned.
# Objective
`MutUntyped` is a struct that stores a `PtrMut` alongside change tick metadata. Working with this type is cumbersome, and has few benefits over storing the pointer and change ticks separately.
Related: #6430 (title is out of date)
## Solution
Add a convenience method for transforming an untyped change detection pointer into its typed counterpart.
---
## Changelog
- Added the method `MutUntyped::with_type`.
# Objective
- Fixes#7066
## Solution
- Split the ChangeDetection trait into ChangeDetection and ChangeDetectionMut
- Added Ref as equivalent to &T with change detection
---
## Changelog
- Support for Ref which allow inspecting change detection flags in an immutable way
## Migration Guide
- While bevy prelude includes both ChangeDetection and ChangeDetectionMut any code explicitly referencing ChangeDetection might need to be updated to ChangeDetectionMut or both. Specifically any reading logic requires ChangeDetection while writes requires ChangeDetectionMut.
use bevy_ecs::change_detection::DetectChanges -> use bevy_ecs::change_detection::{DetectChanges, DetectChangesMut}
- Previously Res had methods to access change detection `is_changed` and `is_added` those methods have been moved to the `DetectChanges` trait. If you are including bevy prelude you will have access to these types otherwise you will need to `use bevy_ecs::change_detection::DetectChanges` to continue using them.
`Query`'s fields being `pub(crate)` means that the struct can be constructed via safe code from anywhere in `bevy_ecs` . This is Not Good since it is intended that all construction of this type goes through `Query::new` which is an `unsafe fn` letting various `Query` methods rely on those invariants holding even though they can be trivially bypassed.
This has no user facing impact
# Objective
- Fix#7103.
- The issue is caused because I forgot to add a where clause to a generated struct in #7056.
## Solution
- Add the where clause.
`Query` relies on the `World` it stores being the same as the world used for creating the `QueryState` it stores. If they are not the same then everything is very unsound. This was not actually being checked anywhere, `Query::new` did not have a safety invariant or even an assertion that the `WorldId`'s are the same.
This shouldn't have any user facing impact unless we have really messed up in bevy and have unsoundness elsewhere (in which case we would now get a panic instead of being unsound).
# Objective
- In some cases, you need a `Mut<T>` pointer, but you only have a mutable reference to one. There is no easy way of converting `&'a mut Mut<'_, T>` -> `Mut<'a, T>` outside of the engine.
### Example (Before)
```rust
fn do_with_mut<T>(val: Mut<T>) { ... }
for x: Mut<T> in &mut query {
// The function expects a `Mut<T>`, so `x` gets moved here.
do_with_mut(x);
// Error: use of moved value.
do_a_thing(&x);
}
```
## Solution
- Add the function `reborrow`, which performs the mapping. This is analogous to `PtrMut::reborrow`.
### Example (After)
```rust
fn do_with_mut<T>(val: Mut<T>) { ... }
for x: Mut<T> in &mut query {
// We reborrow `x`, so the original does not get moved.
do_with_mut(x.reborrow());
// Works fine.
do_a_thing(&x);
}
```
---
## Changelog
- Added the method `reborrow` to `Mut`, `ResMut`, `NonSendMut`, and `MutUntyped`.
# Objective
The type `Local<T>` unnecessarily has the bound `T: Sync` when the local is used in an exclusive system.
## Solution
Lift the bound.
---
## Changelog
Removed the bound `T: Sync` from `Local<T>` when used as an `ExclusiveSystemParam`.
# Objective
Fixes#3310. Fixes#6282. Fixes#6278. Fixes#3666.
## Solution
Split out `!Send` resources into `NonSendResources`. Add a `origin_thread_id` to all `!Send` Resources, check it on dropping `NonSendResourceData`, if there's a mismatch, panic. Moved all of the checks that `MainThreadValidator` would do into `NonSendResources` instead.
All `!Send` resources now individually track which thread they were inserted from. This is validated against for every access, mutation, and drop that could be done against the value.
A regression test using an altered version of the example from #3310 has been added.
This is a stopgap solution for the current status quo. A full solution may involve fully removing `!Send` resources/components from `World`, which will likely require a much more thorough design on how to handle the existing in-engine and ecosystem use cases.
This PR also introduces another breaking change:
```rust
use bevy_ecs::prelude::*;
#[derive(Resource)]
struct Resource(u32);
fn main() {
let mut world = World::new();
world.insert_resource(Resource(1));
world.insert_non_send_resource(Resource(2));
let res = world.get_resource_mut::<Resource>().unwrap();
assert_eq!(res.0, 2);
}
```
This code will run correctly on 0.9.1 but not with this PR, since NonSend resources and normal resources have become actual distinct concepts storage wise.
## Changelog
Changed: Fix soundness bug with `World: Send`. Dropping a `World` that contains a `!Send` resource on the wrong thread will now panic.
## Migration Guide
Normal resources and `NonSend` resources no longer share the same backing storage. If `R: Resource`, then `NonSend<R>` and `Res<R>` will return different instances from each other. If you are using both `Res<T>` and `NonSend<T>` (or their mutable variants), to fetch the same resources, it's strongly advised to use `Res<T>`.
# Objective
- This pulls out some of the changes to Plugin setup and sub apps from #6503 to make that PR easier to review.
- Separate the extract stage from running the sub app's schedule to allow for them to be run on separate threads in the future
- Fixes#6990
## Solution
- add a run method to `SubApp` that runs the schedule
- change the name of `sub_app_runner` to extract to make it clear that this function is only for extracting data between the main app and the sub app
- remove the extract stage from the sub app schedule so it can be run separately. This is done by adding a `setup` method to the `Plugin` trait that runs after all plugin build methods run. This is required to allow the extract stage to be removed from the schedule after all the plugins have added their systems to the stage. We will also need the setup method for pipelined rendering to setup the render thread. See e3267965e1/crates/bevy_render/src/pipelined_rendering.rs (L57-L98)
## Changelog
- Separate SubApp Extract stage from running the sub app schedule.
## Migration Guide
### SubApp `runner` has conceptually been changed to an `extract` function.
The `runner` no longer is in charge of running the sub app schedule. It's only concern is now moving data between the main world and the sub app. The `sub_app.app.schedule` is now run for you after the provided function is called.
```rust
// before
fn main() {
let sub_app = App::empty();
sub_app.add_stage(MyStage, SystemStage::parallel());
App::new().add_sub_app(MySubApp, sub_app, move |main_world, sub_app| {
extract(app_world, render_app);
render_app.app.schedule.run();
});
}
// after
fn main() {
let sub_app = App::empty();
sub_app.add_stage(MyStage, SystemStage::parallel());
App::new().add_sub_app(MySubApp, sub_app, move |main_world, sub_app| {
extract(app_world, render_app);
// schedule is automatically called for you after extract is run
});
}
```
Spiritual successor to #5205.
Actual successor to #6865.
# Objective
Currently, system params are defined using three traits: `SystemParam`, `ReadOnlySystemParam`, `SystemParamState`. The behavior for each param is specified by the `SystemParamState` trait, while `SystemParam` simply defers to the state.
Splitting the traits in this way makes it easier to implement within macros, but it increases the cognitive load. Worst of all, this approach requires each `MySystemParam` to have a public `MySystemParamState` type associated with it.
## Solution
* Merge the trait `SystemParamState` into `SystemParam`.
* Remove all trivial `SystemParam` state types.
* `OptionNonSendMutState<T>`: you will not be missed.
---
- [x] Fix/resolve the remaining test failure.
## Changelog
* Removed the trait `SystemParamState`, merging its functionality into `SystemParam`.
## Migration Guide
**Note**: this should replace the migration guide for #6865.
This is relative to Bevy 0.9, not main.
The traits `SystemParamState` and `SystemParamFetch` have been removed, and their functionality has been transferred to `SystemParam`.
```rust
// Before (0.9)
impl SystemParam for MyParam<'_, '_> {
type State = MyParamState;
}
unsafe impl SystemParamState for MyParamState {
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
}
unsafe impl<'w, 's> SystemParamFetch<'w, 's> for MyParamState {
type Item = MyParam<'w, 's>;
fn get_param(&mut self, ...) -> Self::Item;
}
unsafe impl ReadOnlySystemParamFetch for MyParamState { }
// After (0.10)
unsafe impl SystemParam for MyParam<'_, '_> {
type State = MyParamState;
type Item<'w, 's> = MyParam<'w, 's>;
fn init_state(world: &mut World, system_meta: &mut SystemMeta) -> Self::State { ... }
fn get_param<'w, 's>(state: &mut Self::State, ...) -> Self::Item<'w, 's>;
}
unsafe impl ReadOnlySystemParam for MyParam<'_, '_> { }
```
The trait `ReadOnlySystemParamFetch` has been replaced with `ReadOnlySystemParam`.
```rust
// Before
unsafe impl ReadOnlySystemParamFetch for MyParamState {}
// After
unsafe impl ReadOnlySystemParam for MyParam<'_, '_> {}
```
# Objective
- The doctest for `Mut::map_unchanged` uses a fake function `set_if_not_equal` to demonstrate usage.
- Now that #6853 has been merged, we can use `Mut::set_if_neq` directly instead of mocking it.
# Objective
`SystemParam` `Local`s documentation currently leaves out information that should be documented.
- What happens when multiple `SystemParam`s within the same system have the same `Local` type.
- What lifetime parameter is expected by `Local`.
## Solution
- Added sentences to documentation to communicate this information.
- Renamed `Local` lifetimes in code to `'s` where they previously were not. Users can get complicated incorrect suggested fixes if they pass the wrong lifetime. Some instance of the code had `'w` indicating the expected lifetime might not have been known to those that wrote the code either.
Co-authored-by: iiYese <83026177+iiYese@users.noreply.github.com>
# Objective
- Fix#4200
Currently, `#[derive(SystemParam)]` publicly exposes each field type, which makes it impossible to encapsulate private fields.
## Solution
Previously, the fields were leaked because they were used as an input generic type to the macro-generated `SystemParam::State` struct. That type has been changed to store its state in a field with a specific type, instead of a generic type.
---
## Changelog
- Fixed a bug that caused `#[derive(SystemParam)]` to leak the types of private fields.
# Objective
`Query::get` and other random access methods require looking up `EntityLocation` for every provided entity, then always looking up the `Archetype` to get the table ID and table row. This requires 4 total random fetches from memory: the `Entities` lookup, the `Archetype` lookup, the table row lookup, and the final fetch from table/sparse sets. If `EntityLocation` contains the table ID and table row, only the `Entities` lookup and the final storage fetch are required.
## Solution
Add `TableId` and table row to `EntityLocation`. Ensure it's updated whenever entities are moved around. To ensure `EntityMeta` does not grow bigger, both `TableId` and `ArchetypeId` have been shrunk to u32, and the archetype index and table row are stored as u32s instead of as usizes. This should shrink `EntityMeta` by 4 bytes, from 24 to 20 bytes, as there is no padding anymore due to the change in alignment.
This idea was partially concocted by @BoxyUwU.
## Performance
This should restore the `Query::get` "gains" lost to #6625 that were introduced in #4800 without being unsound, and also incorporates some of the memory usage reductions seen in #3678.
This also removes the same lookups during add/remove/spawn commands, so there may be a bit of a speedup in commands and `Entity{Ref,Mut}`.
---
## Changelog
Added: `EntityLocation::table_id`
Added: `EntityLocation::table_row`.
Changed: `World`s can now only hold a maximum of 2<sup>32</sup>- 1 archetypes.
Changed: `World`s can now only hold a maximum of 2<sup>32</sup> - 1 tables.
## Migration Guide
A `World` can only hold a maximum of 2<sup>32</sup> - 1 archetypes and tables now. If your use case requires more than this, please file an issue explaining your use case.
# Objective
Bevy uses custom `Ptr` types so the rust borrow checker can help ensure lifetimes are correct, even when types aren't known. However, these types don't benefit from the automatic lifetime coercion regular rust references enjoy
## Solution
Add a couple methods to Ptr, PtrMut, and MutUntyped to allow for easy usage of these types in more complex scenarios.
## Changelog
- Added `as_mut` and `as_ref` methods to `MutUntyped`.
- Added `shrink` and `as_ref` methods to `PtrMut`.
## Migration Guide
- `MutUntyped::into_inner` now marks things as changed.
# Objective
Resolve#6156.
The most common type of command is one that runs for a single entity. Built-in commands like this can be ergonomically added to the command queue using the `EntityCommands` struct. However, adding custom entity commands to the queue is quite cumbersome. You must first spawn an entity, store its ID in a local, then construct a command using that ID and add it to the queue. This prevents method chaining, which is the main benefit of using `EntityCommands`.
### Example (before)
```rust
struct MyCustomCommand(Entity);
impl Command for MyCustomCommand { ... }
let id = commands.spawn((...)).id();
commmands.add(MyCustomCommand(id));
```
## Solution
Add the `EntityCommand` trait, which allows directly adding per-entity commands to the `EntityCommands` struct.
### Example (after)
```rust
struct MyCustomCommand;
impl EntityCommand for MyCustomCommand { ... }
commands.spawn((...)).add(MyCustomCommand);
```
---
## Changelog
- Added the trait `EntityCommand`. This is a counterpart of `Command` for types that execute code for a single entity.
## Future Work
If we feel its necessary, we can simplify built-in commands (such as `Despawn`) to use this trait.
# Objective
Any closure with the signature `FnOnce(&mut World)` implicitly implements the trait `Command` due to a blanket implementation. However, this implementation unnecessarily has the `Sync` bound, which limits the types that can be used.
## Solution
Remove the bound.
---
## Changelog
- `Command` closures no longer need to implement the marker trait `std::marker::Sync`.
# Objective
- Be able to name the type that `ManualEventReader::iter/iter_with_id` returns and `EventReader::iter/iter_with_id` by proxy.
Currently for the purpose of https://github.com/bevyengine/bevy/pull/5719
## Solution
- Create a custom `Iterator` type.
# Objective
* Currently, the `SystemParam` derive does not support types with const generic parameters.
* If you try to use const generics, the error message is cryptic and unhelpful.
* Continuation of the work started in #6867 and #6957.
## Solution
Allow const generic parameters to be used with `#[derive(SystemParam)]`.
# Objective
Fixes#4729.
Continuation of #4854.
## Solution
Add documentation to `ParamSet` and its methods. Includes examples suggested by community members in the original PR.
Co-authored-by: Nanox19435 <50684926+Nanox19435@users.noreply.github.com>
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
# Objective
* The `SystemParam` derive internally uses tuples, which means it is constrained by the 16-field limit on `all_tuples`.
* The error message if you exceed this limit is abysmal.
* Supercedes #5965 -- this does the same thing, but is simpler.
## Solution
If any tuples have more than 16 fields, they are folded into tuples of tuples until they are under the 16-field limit.
# Objective
Currently, only named structs can be used with the `SystemParam` derive macro.
## Solution
Remove the restriction. Tuple structs and unit structs are now supported.
---
## Changelog
+ Added support for tuple structs and unit structs to the `SystemParam` derive macro.
# Objective
There is currently no way to iterate over key/value pairs inside an `EntityMap`, which makes the usage of this struct very awkward. I couldn't think of a good reason why the `iter()` function should not be exposed, considering the interface already exposes `keys()` and `values()`, so I made this PR.
## Solution
Implement `iter()` for `EntityMap` in terms of its inner map type.
# Objective
[Rust 1.66](https://blog.rust-lang.org/inside-rust/2022/12/12/1.66.0-prerelease.html) is coming in a few days, and bevy doesn't build with it.
Fix that.
## Solution
Replace output from a trybuild test, and fix a few new instances of `needless_borrow` and `unnecessary_cast` that are now caught.
## Note
Due to the trybuild test, this can't be merged until 1.66 is released.
# Objective
A separate `tracing` span for running a system's commands is created, even if the system doesn't have commands. This is adding extra measuring overhead (see #4892) where it's not needed.
## Solution
Move the span into `ParallelCommandState` and `CommandQueue`'s `SystemParamState::apply`. To get the right metadata for the span, a additional `&SystemMeta` parameter was added to `SystemParamState::apply`.
---
## Changelog
Added: `SystemMeta::name`
Changed: Systems without `Commands` and `ParallelCommands` will no longer show a "system_commands" span when profiling.
Changed: `SystemParamState::apply` now takes a `&SystemMeta` parameter in addition to the provided `&mut World`.
# Objective
Change detection can be spuriously triggered by setting a field to the same value as before. As a result, a common pattern is to write:
```rust
if *foo != value {
*foo = value;
}
```
This is confusing to read, and heavy on boilerplate.
Adopted from #5373, but untangled and rebased to current `bevy/main`.
## Solution
1. Add a method to the `DetectChanges` trait that implements this boilerplate when the appropriate trait bounds are met.
2. Document this minor footgun, and point users to it.
## Changelog
* added the `set_if_neq` method to avoid triggering change detection when the new and previous values are equal. This will work on both components and resources.
## Migration Guide
If you are manually checking if a component or resource's value is equal to its new value before setting it to avoid triggering change detection, migrate to the clearer and more convenient `set_if_neq` method.
## Context
Related to #2363 as it avoids triggering change detection, but not a complete solution (as it still requires triggering it when real changes are made).
Co-authored-by: Zoey <Dessix@Dessix.net>
# Objective
Speed up bundle insertion and spawning from a bundle.
## Solution
Use the same technique used in #6800 to remove the branch on storage type when writing components from a `Bundle` into storage.
- Add a `StorageType` argument to the closure on `Bundle::get_components`.
- Pass `C::Storage::STORAGE_TYPE` into that argument.
- Match on that argument instead of reading from a `Vec<StorageType>` in `BundleInfo`.
- Marked all implementations of `Bundle::get_components` as inline to encourage dead code elimination.
The `Vec<StorageType>` in `BundleInfo` was also removed as it's no longer needed. If users were reliant on this, they can either use the compile time constants or fetch the information from `Components`. Should save a rather negligible amount of memory.
## Performance
Microbenchmarks show a slight improvement to inserting components into existing entities, as well as spawning from a bundle. Ranging about 8-16% faster depending on the benchmark.
```
group main soft-constant-write-components
----- ---- ------------------------------
add_remove/sparse_set 1.08 1019.0±80.10µs ? ?/sec 1.00 944.6±66.86µs ? ?/sec
add_remove/table 1.07 1343.3±20.37µs ? ?/sec 1.00 1257.3±18.13µs ? ?/sec
add_remove_big/sparse_set 1.08 1132.4±263.10µs ? ?/sec 1.00 1050.8±240.74µs ? ?/sec
add_remove_big/table 1.02 2.6±0.05ms ? ?/sec 1.00 2.5±0.08ms ? ?/sec
get_or_spawn/batched 1.15 401.4±17.76µs ? ?/sec 1.00 349.3±11.26µs ? ?/sec
get_or_spawn/individual 1.13 732.1±43.35µs ? ?/sec 1.00 645.6±41.44µs ? ?/sec
insert_commands/insert 1.12 623.9±37.48µs ? ?/sec 1.00 557.4±34.99µs ? ?/sec
insert_commands/insert_batch 1.16 401.4±17.00µs ? ?/sec 1.00 347.4±12.87µs ? ?/sec
insert_simple/base 1.08 416.9±5.60µs ? ?/sec 1.00 385.2±4.14µs ? ?/sec
insert_simple/unbatched 1.06 934.5±44.58µs ? ?/sec 1.00 881.3±47.86µs ? ?/sec
spawn_commands/2000_entities 1.09 190.7±11.41µs ? ?/sec 1.00 174.7±9.15µs ? ?/sec
spawn_commands/4000_entities 1.10 386.5±25.33µs ? ?/sec 1.00 352.3±18.81µs ? ?/sec
spawn_commands/6000_entities 1.10 586.2±34.42µs ? ?/sec 1.00 535.3±27.25µs ? ?/sec
spawn_commands/8000_entities 1.08 778.5±45.15µs ? ?/sec 1.00 718.0±33.66µs ? ?/sec
spawn_world/10000_entities 1.04 1026.4±195.46µs ? ?/sec 1.00 985.8±253.37µs ? ?/sec
spawn_world/1000_entities 1.06 103.8±20.23µs ? ?/sec 1.00 97.6±18.22µs ? ?/sec
spawn_world/100_entities 1.15 11.4±4.25µs ? ?/sec 1.00 9.9±1.87µs ? ?/sec
spawn_world/10_entities 1.05 1030.8±229.78ns ? ?/sec 1.00 986.2±231.12ns ? ?/sec
spawn_world/1_entities 1.01 105.1±23.33ns ? ?/sec 1.00 104.6±31.84ns ? ?/sec
```
---
## Changelog
Changed: `Bundle::get_components` now takes a `FnMut(StorageType, OwningPtr)`. The provided storage type must be correct for the component being fetched.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/6417
## Solution
- clear_trackers was not being called on the render world. This causes the removed components vecs to continuously grow. This PR adds clear trackers to the end of RenderStage::Cleanup
## Migration Guide
The call to `clear_trackers` in `App` has been moved from the schedule to App::update for the main world and calls to `clear_trackers` have been added for sub_apps in the same function. This was due to needing stronger guarantees. If clear_trackers isn't called on a world it can lead to memory leaks in `RemovedComponents`.
# Objective
* Implementing a custom `SystemParam` by hand requires implementing three traits -- four if it is read-only.
* The trait `SystemParamFetch<'w, 's>` is a workaround from before we had generic associated types, and is no longer necessary.
## Solution
* Combine the trait `SystemParamFetch` with `SystemParamState`.
* I decided to remove the `Fetch` name and keep the `State` name, since the former was consistently conflated with the latter.
* Replace the trait `ReadOnlySystemParamFetch` with `ReadOnlySystemParam`, which simplifies trait bounds in generic code.
---
## Changelog
- Removed the trait `SystemParamFetch`, moving its functionality to `SystemParamState`.
- Replaced the trait `ReadOnlySystemParamFetch` with `ReadOnlySystemParam`.
## Migration Guide
The trait `SystemParamFetch` has been removed, and its functionality has been transferred to `SystemParamState`.
```rust
// Before
impl SystemParamState for MyParamState {
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
}
impl<'w, 's> SystemParamFetch<'w, 's> for MyParamState {
type Item = MyParam<'w, 's>;
fn get_param(...) -> Self::Item;
}
// After
impl SystemParamState for MyParamState {
type Item<'w, 's> = MyParam<'w, 's>; // Generic associated types!
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
fn get_param<'w, 's>(...) -> Self::Item<'w, 's>;
}
```
The trait `ReadOnlySystemParamFetch` has been replaced with `ReadOnlySystemParam`.
```rust
// Before
unsafe impl ReadOnlySystemParamFetch for MyParamState {}
// After
unsafe impl<'w, 's> ReadOnlySystemParam for MyParam<'w, 's> {}
```
# Objective
It's not clear to users how to handle `!Sync` types as components and resources in the absence of engine level support for them.
## Solution
Added a section to `Component`'s and `Resource`'s type level docs on available options for making a type `Sync` when it holds `!Sync` fields, linking `bevy_utils::synccell::SyncCell` and the currently unstable `std::sync::Exclusive`.
Also added a compile_fail doctest that illustrates how to apply `SyncCell`. These will break when/if #6572 gets merged, at which point these docs should be updated.
# Objective
Fixes#6224, add ``dbg``, ``info``, ``warn`` and ``error`` system piping adapter variants to expand #5776, which call the corresponding re-exported [bevy_log macros](https://docs.rs/bevy/latest/bevy/log/macro.info.html) when the result is an error.
## Solution
* Added ``dbg``, ``info``, ``warn`` and ``error`` system piping adapter variants to ``system_piping.rs``.
* Modified and added tests for these under examples in ``system_piping.rs``.
# Objective
#6547 accidentally broke change detection for SparseSet components by using `Ticks::from_tick_cells` with the wrong argument order.
## Solution
Use the right argument order. Add a regression test.
having `doc(hidden)` on the read only version of a generated mutable world query leads to docs on the readonly item having a dead link. It also makes it annoying to have nice docs for libraries attempting to expose derived `WorldQuery` structs as re-exporting the read only item does not cause it to appear in docs even though it would be intended for users to know about the read only world query and use it.
# Objective
Prevent future unsoundness that was seen in #6623.
## Solution
Newtype both indexes in `Archetype` and `Table` as `ArchetypeRow` and `TableRow`. This avoids weird numerical manipulation on the indices, and can be stored and treated opaquely. Also enforces the source and destination of where these indices at a type level.
---
## Changelog
Changed: `Archetype` indices and `Table` rows have been newtyped as `ArchetypeRow` and `TableRow`.
# Objective
`EntityRef::get` and friends all type erase calls to fetch the target components by using passing in the `TypeId` instead of using generics. This is forcing a lookup to `Components` to fetch the storage type. This adds an extra memory lookup and forces a runtime branch instead of allowing the compiler to optimize out the unused branch.
## Solution
Leverage `Component::Storage::STORAGE_TYPE` as a constant instead of fetching the metadata from `Components`.
## Performance
This has a near 2x speedup for all calls to `World::get`. Microbenchmark results from my local machine. `Query::get_component`, which uses `EntityRef::get` internally also show a slight speed up. This has closed the gap between `World::get` and `Query::get` for the same use case.
```
group entity-ref-generics main
----- ------------------- ----
query_get_component/50000_entities_sparse 1.00 890.6±40.42µs ? ?/sec 1.10 980.6±28.22µs ? ?/sec
query_get_component/50000_entities_table 1.00 968.5±73.73µs ? ?/sec 1.08 1048.8±31.76µs ? ?/sec
query_get_component_simple/system 1.00 703.2±4.37µs ? ?/sec 1.00 702.1±6.13µs ? ?/sec
query_get_component_simple/unchecked 1.02 855.8±8.98µs ? ?/sec 1.00 843.1±8.19µs ? ?/sec
world_get/50000_entities_sparse 1.00 202.3±3.15µs ? ?/sec 1.85 374.0±20.96µs ? ?/sec
world_get/50000_entities_table 1.00 193.0±1.78µs ? ?/sec 2.02 389.2±26.55µs ? ?/sec
world_query_get/50000_entities_sparse 1.01 162.4±2.23µs ? ?/sec 1.00 161.3±0.95µs ? ?/sec
world_query_get/50000_entities_table 1.00 199.9±0.63µs ? ?/sec 1.00 200.2±0.74µs ? ?/sec
```
This should also, by proxy, speed up the `ReflectComponent` APIs as most of those use `World::get` variants internally.
# Objective
The methods `World::change_tick` and `World::read_change_tick` lack documentation and have confusingly similar behavior.
## Solution
Add documentation and clarify the distinction between the two functions.
The PR fixes the interface of `EventReader::clear`. Currently, the method consumes the reader, which makes it unusable.
## Changelog
- `EventReader::clear` now takes a mutable reference instead of consuming the event reader.
## Migration Guide
`EventReader::clear` now takes a mutable reference instead of consuming the event reader. This means that `clear` now needs explicit mutable access to the reader variable, which previously could have been omitted in some cases:
```rust
// Old (0.9)
fn clear_events(reader: EventReader<SomeEvent>) {
reader.clear();
}
// New (0.10)
fn clear_events(mut reader: EventReader<SomeEvent>) {
reader.clear();
}
```
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Fixes#6812.
## Solution
- Replaced `World::read_change_ticks` with `World::change_ticks` within `bevy_ecs` crate in places where `World` references were mutable.
---
# Objective
Partially addresses #5504. Allow users to get an `Iterator<Item = EntityRef<'a>>` over all entities in the `World`.
## Solution
Change `World::iter_entities` to return an iterator of `EntityRef` instead of `Entity`.
Not sure how to tackle making an `Iterator<Item = EntityMut<'_>>` without being horribly unsound. Might need to wait for `LendingIterator` to stabilize so we can ensure only one of them is valid at a given time.
---
## Changelog
Changed: `World::iter_entities` now returns an iterator of `EntityRef` instead of `Entity`.
# Objective
Currently, the `SystemParam` derive forces you to declare the lifetime parameters `<'w, 's>`, even if you don't use them.
If you don't follow this structure, the error message is quite nasty.
### Example (before):
```rust
#[derive(SystemParam)]
pub struct EventWriter<'w, 's, E: Event> {
events: ResMut<'w, Events<E>>,
// The derive forces us to declare the `'s` lifetime even though we don't use it,
// so we have to add this `PhantomData` to please rustc.
#[system_param(ignore)]
_marker: PhantomData<&'s ()>,
}
```
## Solution
* Allow the user to omit either lifetime.
* Emit a descriptive error if any lifetimes used are invalid.
### Example (after):
```rust
#[derive(SystemParam)]
pub struct EventWriter<'w, E: Event> {
events: ResMut<'w, Events<E>>,
}
```
---
## Changelog
* The `SystemParam` derive is now more flexible, allowing you to omit unused lifetime parameters.
# Objective
The soundness of the ECS `World` partially relies on the correctness of the state of `Entities` stored within it. We're currently allowing users to (unsafely) mutate it, as well as readily construct it without using a `World`. While this is not strictly unsound so long as users (including `bevy_render`) safely use the APIs, it's a fairly easy path to unsoundness without much of a guard rail.
Addresses #3362 for `bevy_ecs::entity`. Incorporates the changes from #3985.
## Solution
Remove `Entities`'s `Default` implementation and force access to the type to only be through a properly constructed `World`.
Additional cleanup for other parts of `bevy_ecs::entity`:
- `Entity::index` and `Entity::generation` are no longer `pub(crate)`, opting to force the rest of bevy_ecs to use the public interface to access these values.
- `EntityMeta` is no longer `pub` and also not `pub(crate)` to attempt to cut down on updating `generation` without going through an `Entities` API. It's currently inaccessible except via the `pub(crate)` Vec on `Entities`, there was no way for an outside user to use it.
- Added `Entities::set`, an unsafe `pub(crate)` API for setting the location of an Entity (parallel to `Entities::get`) that replaces the internal case where we need to set the location of an entity when it's been spawned, moved, or despawned.
- `Entities::alloc_at_without_replacement` is only used in `World::get_or_spawn` within the first party crates, and I cannot find a public use of this API in any ecosystem crate that I've checked (via GitHub search).
- Attempted to document the few remaining undocumented public APIs in the module.
---
## Changelog
Removed: `Entities`'s `Default` implementation.
Removed: `EntityMeta`
Removed: `Entities::alloc_at_without_replacement` and `AllocAtWithoutReplacement`.
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Document `bevy_ecs::archetype` and and declutter the public documentation for the module by making types non-`pub`.
Addresses #3362 for `bevy_ecs::archetype`.
## Solution
- Add module level documentation.
- Add type and API level documentation for all public facing types.
- Make `ArchetypeId`, `ArchetypeGeneration`, and `ArchetypeComponentId` truly opaque IDs that are not publicly constructable.
- Make `AddBundle` non-pub, make `Edges::get_add_bundle` return a `Option<ArchetypeId>` and fork the existing function into `Edges::get_add_bundle_internal`.
- Remove `pub(crate)` on fields that have a corresponding pub accessor function.
- Removed the `Archetypes: Default` impl, opting for a `pub(crate) fn new` alternative instead.
---
## Changelog
Added: `ArchetypeGeneration` now implements `Ord` and `PartialOrd`.
Removed: `Archetypes`'s `Default` implementation.
Removed: `Archetype::new` and `Archetype::is_empty`.
Removed: `ArchetypeId::new` and `ArchetypeId::value`.
Removed: `ArchetypeGeneration::value`
Removed: `ArchetypeIdentity`.
Removed: `ArchetypeComponentId::new` and `ArchetypeComponentId::value`.
Removed: `AddBundle`. `Edges::get_add_bundle` now returns `Option<ArchetypeId>`
# Objective
- The documentation describing different ways to spawn an Entity is missing reference to "method" for "Spawn an entity with components".
## Solution
- Update the documentation to add the reference to `World::spawn`.
