# Objective
Fixes#16192
## Solution
I renamed the Pointer<Down/Up> to <Pressed/Released> and then I resolved
all the errors.
Renamed variables like "is_down" to "is_pressed" to maintain
consistency.
Modified the docs in places where 'down/up' were used to maintain
consistency.
## Testing
I haven't tested this in any way beside the checks from rust analyzer
and the examples in the examples/ directory.
---
## Migration Guide
### `bevy_picking/src/pointer.rs`:
#### `enum PressDirection`:
- `PressDirection::Down` changes to `PressDirection::Pressed`.
- `PressDirection::Up` changes to `PressDirection::Released`.
These changes are also relevant when working with `enum PointerAction`
### `bevy_picking/src/events.rs`:
Clicking and pressing Events in events.rs categories change from [Down],
[Up], [Click] to [Pressed], [Released], [Click].
- `struct Down` changes to `struct Pressed` - fires when a pointer
button is pressed over the 'target' entity.
- `struct Up` changes to `struct Released` - fires when a pointer button
is released over the 'target' entity.
- `struct Click` now fires when a pointer sends a Pressed event followed
by a Released event on the same 'target'.
- `struct DragStart` now fires when the 'target' entity receives a
pointer Pressed event followed by a pointer Move event.
- `struct DragEnd` now fires when the 'target' entity is being dragged
and receives a pointer Released event.
- `PickingEventWriters<'w>::down_events: EventWriter<'w, Pointer<Down>>`
changes to `PickingEventWriters<'w>::pressed_events: EventWriter<'w,
Pointer<Pressed>>`.
- `PickingEventWriters<'w>::up_events changes to
PickingEventWriters<'w>::released_events`.
---------
Co-authored-by: Harun Ibram <harun.ibram@outlook.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- A `Trigger` has multiple associated `Entity`s - the entity observing
the event, and the entity that was targeted by the event.
- The field `entity: Entity` encodes no semantic information about what
the entity is used for, you can already tell that it's an `Entity` by
the type signature!
## Solution
- Rename `trigger.entity()` to `trigger.target()`
---
## Changelog
- `Trigger`s are associated with multiple entities. `Trigger::entity()`
has been renamed to `Trigger::target()` to reflect the semantics of the
entity being returned.
## Migration Guide
- Rename `Trigger::entity()` to `Trigger::target()`.
- Rename `ObserverTrigger::entity` to `ObserverTrigger::target`
# Objective
Fixes typos in bevy project, following suggestion in
https://github.com/bevyengine/bevy-website/pull/1912#pullrequestreview-2483499337
## Solution
I used https://github.com/crate-ci/typos to find them.
I included only the ones that feel undebatable too me, but I am not in
game engine so maybe some terms are expected.
I left out the following typos:
- `reparametrize` => `reparameterize`: There are a lot of occurences, I
believe this was expected
- `semicircles` => `hemicircles`: 2 occurences, may mean something
specific in geometry
- `invertation` => `inversion`: may mean something specific
- `unparented` => `parentless`: may mean something specific
- `metalness` => `metallicity`: may mean something specific
## Testing
- Did you test these changes? If so, how? I did not test the changes,
most changes are related to raw text. I expect the others to be tested
by the CI.
- Are there any parts that need more testing? I do not think
- How can other people (reviewers) test your changes? Is there anything
specific they need to know? To me there is nothing to test
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
---
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
(kept in case I include the `reparameterize` change here)
- If this PR is a breaking change (relative to the last release of
Bevy), describe how a user might need to migrate their code to support
these changes
- Simply adding new functionality is not a breaking change.
- Fixing behavior that was definitely a bug, rather than a questionable
design choice is not a breaking change.
## Questions
- [x] Should I include the above typos? No
(https://github.com/bevyengine/bevy/pull/16702#issuecomment-2525271152)
- [ ] Should I add `typos` to the CI? (I will check how to configure it
properly)
This project looks awesome, I really enjoy reading the progress made,
thanks to everyone involved.
# Objective
The "mehses" typo introduced in a review comment
[here](https://github.com/bevyengine/bevy/pull/16657#discussion_r1870834999)
hurts my soul, it was merged right as I was about to comment about it :(
## Solution
Fix it :D
(also, why didn't the CI typo checker catch this?)
# Objective
- This fixes raycast picking with lyon
- reverse winding of 2D meshes currently results in them being rendered
but not pickable as the raycast passes through the backface and would
only hit "from below"
## Solution
- Disables backface culling for Mesh2d
## Testing
- Tested picking with bevy_prototype_lyon
- Could probably use testing with Mesh3d (should not be affected) and
SimplifiedMesh (no experience with that, could have the same issue if
used for 2D?)
---------
Co-authored-by: Aevyrie <aevyrie@gmail.com>
# Objective
On the web, it's common to attach observers to windows. As @viridia has
discovered, this can be quite a nice paradigm in bevy as well when
applied to observers. The changes here are intended to make this
possible.
+ Adds a new default picking back-end as part to the core picking plugin
(which can be disabled) that causes pointers on windows to treat the
window entity as the final hit, behind everything else. This means
clicking empty space now dispatches normal picking events to the window,
and is especially nice for drag-and-drop functionality.
+ Adds a new traversal type, specific to picking events, that causes
them to bubble up to the window entity after they reach the root of the
hierarchy.
## Solution
The window picking back-end is extremely simple, but the bubbling
changes are much more complex, since they require doing a different
traversal depending on the picking event.
To achieve this, `Traversal` has been made generic over an associated
sized data type `D`. Observer bounds have been changed such that
`Event::Traversal<D>` is required for `Trigger<D>`. A blanket
implementation has been added for `()` and `Parent` that preserves the
existing functionality. A new `PointerTraversal` traversal has been
implemented, with a blanket implementation for `Traversal<Pointer<E>>`.
It is still possible to use `Parent` as the traversal for any event,
because of the blanket implementation. It is now possible for users to
add other custom traversals, which read event data during traversal.
## Testing
I tested these changes locally on some picking UI prototypes I have been
playing with. I also tested them on the picking examples.
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
- Fixes#16469.
## Solution
- Make the picking backend features not enabled by default in each
sub-crate.
- Make features in `bevy_internal` to set the backend features
- Make the root `bevy` crate set the features by default.
## Testing
- The mesh and sprite picking examples still work correctly.
Tweaks picking docs slightly for formatting and to add additional
context about the ordering of `Over` and `Out` events. Also shifts `Out`
to trigger before `Over` in the global event ordering.
Because of how focus is tracked, we must send all `Over` and `Out`
events at the same time, in a block. Originally I had `Over` precede
`Out` in the global event order, because this seemed natural. However,
the effect of this, when a pointer moves between entities, is to have
the new entity receive `Over` before the old entity received `Out`,
which several users found confusing.
The new ordering (out before over globally, over before out locally per
entity) should make it much easier to write hover state cleanup code.
In `bevy_mod_picking` events are driven by several interlocking state
machines, which read and write events, and share state in a few common
resources. When I merged theses state machines into one to make event
ordering work properly, I combined this state and hid it in a `Local`.
This PR exposes the state in a resource again. Also adds a simple little
API for it. Useful for adding debug UI.
Fixes a small divergence between `bevy_mod_picking` and the up-streamed
`bevy_picking`: Both have a `Pointer<E>` constructor with the same
types, but in a different order.
This is part of work being done on `bevy_mod_picking` to simplify the
migration to `bevy_picking`.
# Objective
In `bevy_mod_picking` events are accessible through event listeners or
`EventReader`s. When I replaced event listeners with observers, I
removed the `EventReader` for simplicity. This adds it back.
## Solution
All picking events are now properly registered, and can be accessed
through `EventReader<Pointer<E>>`. `Pointer` now tracks the entity the
event targeted initially, and this can also be helpful in observers
(which don't currently do this).
## Testing
The picking examples run fine. This shouldn't really change anything.
---------
Co-authored-by: Aevyrie <aevyrie@gmail.com>
# Objective
- Mesh picking is noisy when a non triangle list is used
- Mesh picking runs even when users don't need it
- Resolve#16065
## Solution
- Don't add the mesh picking plugin by default
- Remove error spam
# Objective
- `MeshPickingBackend` and `SpritePickingBackend` do not have the
`Plugin` suffix
- `DefaultPickingPlugins` is masquerading as a `Plugin` when in reality
it should be a `PluginGroup`
- Fixes#16081.
## Solution
- Rename some structures:
|Original Name|New Name|
|-|-|
|`MeshPickingBackend`|`MeshPickingPlugin`|
|`MeshPickingBackendSettings`|`MeshPickingSettings`|
|`SpritePickingBackend`|`SpritePickingPlugin`|
|`UiPickingBackendPlugin`|`UiPickingPlugin`|
- Make `DefaultPickingPlugins` a `PluginGroup`.
- Because `DefaultPickingPlugins` is within the `DefaultPlugins` plugin
group, I also added support for nested plugin groups to the
`plugin_group!` macro.
## Testing
- I used ripgrep to ensure all references were properly renamed.
- For the `plugin_group!` macro, I used `cargo expand` to manually
inspect the expansion of `DefaultPlugins`.
---
## Migration Guide
> [!NOTE]
>
> All 3 of the changed structures were added after 0.14, so this does
not need to be included in the 0.14 to 0.15 migration guide.
- `MeshPickingBackend` is now named `MeshPickingPlugin`.
- `MeshPickingBackendSettings` is now named `MeshPickingSettings`.
- `SpritePickingBackend` is now named `SpritePickingPlugin`.
- `UiPickingBackendPlugin` is now named `UiPickingPlugin`.
- `DefaultPickingPlugins` is now a a `PluginGroup` instead of a
`Plugin`.
# Objective
Built-in observers & events should be `Reflect` so that components that
interact with them can be serialized in scenes. This is a similar pr to
#14259.
# Objective
Closes#15545.
`bevy_picking` supports UI and sprite picking, but not mesh picking.
Being able to pick meshes would be extremely useful for various games,
tools, and our own examples, as well as scene editors and inspectors.
So, we need a mesh picking backend!
Luckily,
[`bevy_mod_picking`](https://github.com/aevyrie/bevy_mod_picking) (which
`bevy_picking` is based on) by @aevyrie already has a [backend for
it](74f0c3c0fb/backends/bevy_picking_raycast/src/lib.rs)
using [`bevy_mod_raycast`](https://github.com/aevyrie/bevy_mod_raycast).
As a side product of adding mesh picking, we also get support for
performing ray casts on meshes!
## Solution
Upstream a large chunk of the immediate-mode ray casting functionality
from `bevy_mod_raycast`, and add a mesh picking backend based on
`bevy_mod_picking`. Huge thanks to @aevyrie who did all the hard work on
these incredible crates!
All meshes are pickable by default. Picking can be disabled for
individual entities by adding `PickingBehavior::IGNORE`, like normal.
Or, if you want mesh picking to be entirely opt-in, you can set
`MeshPickingBackendSettings::require_markers` to `true` and add a
`RayCastPickable` component to the desired camera and target entities.
You can also use the new `MeshRayCast` system parameter to cast rays
into the world manually:
```rust
fn ray_cast_system(mut ray_cast: MeshRayCast, foo_query: Query<(), With<Foo>>) {
let ray = Ray3d::new(Vec3::ZERO, Dir3::X);
// Only ray cast against entities with the `Foo` component.
let filter = |entity| foo_query.contains(entity);
// Never early-exit. Note that you can change behavior per-entity.
let early_exit_test = |_entity| false;
// Ignore the visibility of entities. This allows ray casting hidden entities.
let visibility = RayCastVisibility::Any;
let settings = RayCastSettings::default()
.with_filter(&filter)
.with_early_exit_test(&early_exit_test)
.with_visibility(visibility);
// Cast the ray with the settings, returning a list of intersections.
let hits = ray_cast.cast_ray(ray, &settings);
}
```
This is largely a direct port, but I did make several changes to match
our APIs better, remove things we don't need or that I think are
unnecessary, and do some general improvements to code quality and
documentation.
### Changes Relative to `bevy_mod_raycast` and `bevy_mod_picking`
- Every `Raycast` and "raycast" has been renamed to `RayCast` and "ray
cast" (similar reasoning as the "Naming" section in #15724)
- `Raycast` system param has been renamed to `MeshRayCast` to avoid
naming conflicts and to be explicit that it is not for colliders
- `RaycastBackend` has been renamed to `MeshPickingBackend`
- `RayCastVisibility` variants are now `Any`, `Visible`, and
`VisibleInView` instead of `Ignore`, `MustBeVisible`, and
`MustBeVisibleAndInView`
- `NoBackfaceCulling` has been renamed to `RayCastBackfaces`, to avoid
implying that it affects the rendering of backfaces for meshes (it
doesn't)
- `SimplifiedMesh` and `RayCastBackfaces` live near other ray casting
API types, not in their own 10 LoC module
- All intersection logic and types are in the same `intersections`
module, not split across several modules
- Some intersection types have been renamed to be clearer and more
consistent
- `IntersectionData` -> `RayMeshHit`
- `RayHit` -> `RayTriangleHit`
- General documentation and code quality improvements
### Removed / Not Ported
- Removed unused ray helpers and types, like `PrimitiveIntersection`
- Removed getters on intersection types, and made their properties
public
- There is no `2d` feature, and `Raycast::mesh_query` and
`Raycast::mesh2d_query` have been merged into `MeshRayCast::mesh_query`,
which handles both 2D and 3D
- I assume this existed previously because `Mesh2dHandle` used to be in
`bevy_sprite`. Now both the 2D and 3D mesh are in `bevy_render`.
- There is no `debug` feature or ray debug rendering
- There is no deferred API (`RaycastSource`)
- There is no `CursorRayPlugin` (the picking backend handles this)
### Note for Reviewers
In case it's helpful, the [first
commit](281638ef10)
here is essentially a one-to-one port. The rest of the commits are
primarily refactoring and cleaning things up in the ways listed earlier,
as well as changes to the module structure.
It may also be useful to compare the original [picking
backend](74f0c3c0fb/backends/bevy_picking_raycast/src/lib.rs)
and [`bevy_mod_raycast`](https://github.com/aevyrie/bevy_mod_raycast) to
this PR. Feel free to mention if there are any changes that I should
revert or something I should not include in this PR.
## Testing
I tested mesh picking and relevant components in some examples, for both
2D and 3D meshes, and added a new `mesh_picking` example. I also
~~stole~~ ported over the [ray-mesh intersection
benchmark](dbc5ef32fe/benches/ray_mesh_intersection.rs)
from `bevy_mod_raycast`.
---
## Showcase
Below is a version of the `2d_shapes` example modified to demonstrate 2D
mesh picking. This is not included in this PR.
https://github.com/user-attachments/assets/7742528c-8630-4c00-bacd-81576ac432bf
And below is the new `mesh_picking` example:
https://github.com/user-attachments/assets/b65c7a5a-fa3a-4c2d-8bbd-e7a2c772986e
There is also a really cool new `mesh_ray_cast` example ported over from
`bevy_mod_raycast`:
https://github.com/user-attachments/assets/3c5eb6c0-bd94-4fb0-bec6-8a85668a06c9
---------
Co-authored-by: Aevyrie <aevyrie@gmail.com>
Co-authored-by: Trent <2771466+tbillington@users.noreply.github.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
- Closes#15752
Calling the functions `App::observe` and `World::observe` doesn't make
sense because you're not "observing" the `App` or `World`, you're adding
an observer that listens for an event that occurs *within* the `World`.
We should rename them to better fit this.
## Solution
Renames:
- `App::observe` -> `App::add_observer`
- `World::observe` -> `World::add_observer`
- `Commands::observe` -> `Commands::add_observer`
- `EntityWorldMut::observe_entity` -> `EntityWorldMut::observe`
(Note this isn't a breaking change as the original rename was introduced
earlier this cycle.)
## Testing
Reusing current tests.
# Objective
- Rename `Pickable` to `PickingBehavior` to counter the easily-made
assumption that the component is required. It is optional
- Fix and clarify documentation
- The docs in `crates/bevy_ui/src/picking_backend.rs` were incorrect
about the necessity of `Pickable`
- Plus two minor code quality changes in this commit
(7c2e75f48d)
Closes#15632
# Objective
Migrate `bevy_picking` to the required components API
## Solution
- Made `PointerId` require `PointerLocation`, `PointerPress`, and
`PointerInteraction`
- Removed `PointerBundle`
- Removed all engine uses of `PointerBundle`
- Added convenience constructor `PointerLocation::new(location:
Location)`
## Testing
- ran unit tests
- ran `sprite_picking` example, everything seemed fine.
## Migration Guide
This API hasn't shipped yet, so I didn't bother with a deprecation.
However, for any crates tracking main the changes are as follows:
Previous api:
```rs
commands.insert(PointerBundle::new(PointerId::Mouse));
commands.insert(PointerBundle::new(PointerId::Mouse).with_location(location));
```
New api:
```rs
commands.insert(PointerId::Mouse);
commands.insert((PointerId::Mouse, PointerLocation::new(location)));
```
# Objective
The current observers have some unfortunate footguns where you can end
up confused about what is actually being observed. For apps you can
chain observe like `app.observe(..).observe(..)` which works like you
would expect, but if you try the same with world the first `observe()`
will return the `EntityWorldMut` for the created observer, and the
second `observe()` will only observe on the observer entity. It took
several hours for multiple people on discord to figure this out, which
is not a great experience.
## Solution
Rename `observe` on entities to `observe_entity`. It's slightly more
verbose when you know you have an entity, but it feels right to me that
observers for specific things have more specific naming, and it prevents
this issue completely.
Another possible solution would be to unify `observe` on `App` and
`World` to have the same kind of return type, but I'm not sure exactly
what that would look like.
## Testing
Simple name change, so only concern is docs really.
---
## Migration Guide
The `observe()` method on entities has been renamed to
`observe_entity()` to prevent confusion about what is being observed in
some cases.
As discussed in #15521
- Partial revert of #14897, reverting the change to the methods to
consume `self`
- The `insert_if` method is kept
The migration guide of #14897 should be removed
Closes#15521
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#6370
- Closes#6581
## Solution
- Added the following lints to the workspace:
- `std_instead_of_core`
- `std_instead_of_alloc`
- `alloc_instead_of_core`
- Used `cargo +nightly fmt` with [item level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Item%5C%3A)
to split all `use` statements into single items.
- Used `cargo clippy --workspace --all-targets --all-features --fix
--allow-dirty` to _attempt_ to resolve the new linting issues, and
intervened where the lint was unable to resolve the issue automatically
(usually due to needing an `extern crate alloc;` statement in a crate
root).
- Manually removed certain uses of `std` where negative feature gating
prevented `--all-features` from finding the offending uses.
- Used `cargo +nightly fmt` with [crate level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Crate%5C%3A)
to re-merge all `use` statements matching Bevy's previous styling.
- Manually fixed cases where the `fmt` tool could not re-merge `use`
statements due to conditional compilation attributes.
## Testing
- Ran CI locally
## Migration Guide
The MSRV is now 1.81. Please update to this version or higher.
## Notes
- This is a _massive_ change to try and push through, which is why I've
outlined the semi-automatic steps I used to create this PR, in case this
fails and someone else tries again in the future.
- Making this change has no impact on user code, but does mean Bevy
contributors will be warned to use `core` and `alloc` instead of `std`
where possible.
- This lint is a critical first step towards investigating `no_std`
options for Bevy.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Fixes#14331
## Solution
- Make `Traversal` a subtrait of `ReadOnlyQueryData`
- Update implementations and usages
## Testing
- Updated unit tests
## Migration Guide
Update implementations of `Traversal`.
---------
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
# Objective
> Rust 1.81 released the #[expect(...)] attribute, which works like
#[allow(...)] but throws a warning if the lint isn't raised. This is
preferred to #[allow(...)] because it tells us when it can be removed.
- Adopts the parts of #15118 that are complete, and updates the branch
so it can be merged.
- There were a few conflicts, let me know if I misjudged any of 'em.
Alice's
[recommendation](https://github.com/bevyengine/bevy/issues/15059#issuecomment-2349263900)
seems well-taken, let's do this crate by crate now that @BD103 has done
the lion's share of this!
(Relates to, but doesn't yet completely finish #15059.)
Crates this _doesn't_ cover:
- bevy_input
- bevy_gilrs
- bevy_window
- bevy_winit
- bevy_state
- bevy_render
- bevy_picking
- bevy_core_pipeline
- bevy_sprite
- bevy_text
- bevy_pbr
- bevy_ui
- bevy_gltf
- bevy_gizmos
- bevy_dev_tools
- bevy_internal
- bevy_dylib
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Ben Frankel <ben.frankel7@gmail.com>
Co-authored-by: Antony <antony.m.3012@gmail.com>
# Objective
- Intended to resolve https://github.com/bevyengine/bevy/issues/15290.
- Fix four duplicate `DragEnd` firing when drag finished.
- Fix redundant `DragStart` firing when dragging across pick-able
entities.
- Fix `Click` coming after `Drop` and obliterating finished drag
interactions.
Big thanks to B. Reinhart for testing picking in their codebase and
identifying these issues early.
## Solution
- Fix press & drag state being cleared after the first entity is read
from the hover map on pointer release, rather than after all entities
are read. This caused only the first hovered entity to receive `Up` and
`Click` events.
- Fixes `Down` being determined using the `previous_hover_map` rather
than `hover_map`, a regression compared to `bevy_mod_picking`. I think
this is what was messing up drag events.
- Fixes and issue where `PointerEnd` would fire multiple times and
`PointerStart` would fire when dragging onto a new entity.
- Re-orders events to make them easier to handle. `Out` now fired before
`DragLeave` and `Click/Up` now fire before `DragDrop`.
- Generally refactors the picking event code to be more clean and sane.
## Testing
These changes are currently sporadically tested.
# Objective
- Crate-level prelude modules, such as `bevy_ecs::prelude`, are plagued
with inconsistency! Let's fix it!
## Solution
Format all preludes based on the following rules:
1. All preludes should have brief documentation in the format of:
> The _name_ prelude.
>
> This includes the most common types in this crate, re-exported for
your convenience.
2. All documentation should be outer, not inner. (`///` instead of
`//!`.)
3. No prelude modules should be annotated with `#[doc(hidden)]`. (Items
within them may, though I'm not sure why this was done.)
## Testing
- I manually searched for the term `mod prelude` and updated all
occurrences by hand. 🫠
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Correctly order picking events. Resolves
https://github.com/bevyengine/bevy/issues/5984.
## Solution
Event ordering [very long standing
problem](https://github.com/aevyrie/bevy_mod_picking/issues/294) with
mod picking, stemming from two related issues. The first problem was
that `Pointer<T>` events of different types couldn't be ordered, but we
have already gotten around that in the upstream by switching to
observers. Since observers run in the order they are triggered, this
isn't an issue.
The second problem was that the underlying event streams that picking
uses to create it's pointer interaction events *also* lacked ordering,
and the systems that generated the points couldn't interleave events.
This PR fixes that by unifying the event streams and integrating the
various interaction systems.
The concrete changes are as follows:
+ `bevy_winit::WinitEvent` has been moved to `bevy_window::WindowEvent`.
This provides a unified (and more importantly, *ordered*) input stream
for both `bevy_window` and `bevy_input` events.
+ Replaces `InputMove` and `InputPress` with `PointerInput`, a new
unified input event which drives picking and interaction. This event is
built to have drop-in forward compatibility with [winit's upcoming
pointer abstraction](https://github.com/rust-windowing/winit/pull/3876).
I have added code to emulate it using the current winit input
abstractions, but this entire thing will be much more robust when it
lands.
+ Rolls `pointer_events` `send_click_and_drag_events` and
`send_drag_over_events` into a single system, which operates directly on
`PointerEvent` and triggers observers as output.
The PR also improves docs and takes the opportunity to
refactor/streamline the pointer event dispatch logic.
## Status & Testing
This PR is now feature complete and documented. While it is
theoretically possible to add unit tests for the ordering, building the
picking mocking for that will take a little while.
Feedback on the chosen ordering of events is within-scope.
## Migration Guide
For users switching from `bevy_mod_picking` to `bevy_picking`:
+ Instead of adding an `On<T>` component, use `.observe(|trigger:
Trigger<T>|)`. You may now apply multiple handlers to the same entity
using this command.
+ Pointer interaction events now have semi-deterministic ordering which
(more or less) aligns with the order of the raw input stream. Consult
the docs on `bevy_picking::event::pointer_events` for current
information. You may need to adjust your event handling logic
accordingly.
+ `PointerCancel` has been replaced with `Pointer<Cancled>`, which now
has the semantics of an OS touch pointer cancel event.
+ `InputMove` and `InputPress` have been merged into `PointerInput`. The
use remains exactly the same.
+ Picking interaction events are now only accessible through observers,
and no `EventReader`. This functionality may be re-implemented later.
For users of `bevy_winit`:
+ The event `bevy_winit::WinitEvent` has moved to
`bevy_window::WindowEvent`. If this was the only thing you depended on
`bevy_winit` for, you should switch your dependency to `bevy_window`.
+ `bevy_window` now depends on `bevy_input`. The dependencies of
`bevy_input` are a subset of the existing dependencies for `bevy_window`
so this should be non-breaking.
# Objective
As discussed in https://github.com/bevyengine/bevy/issues/7386, system
order ambiguities within `DefaultPlugins` are a source of bugs in the
engine and badly pollute diagnostic output for users.
We should eliminate them!
This PR is an alternative to #15027: with all external ambiguities
silenced, this should be much less prone to merge conflicts and the test
output should be much easier for authors to understand.
Note that system order ambiguities are still permitted in the
`RenderApp`: these need a bit of thought in terms of how to test them,
and will be fairly involved to fix. While these aren't *good*, they'll
generally only cause graphical bugs, not logic ones.
## Solution
All remaining system order ambiguities have been resolved.
Review this PR commit-by-commit to see how each of these problems were
fixed.
## Testing
`cargo run --example ambiguity_detection` passes with no panics or
logging!
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14593.
## Solution
- Add `ViewportConversionError` and return it from viewport conversion
methods on Camera.
## Testing
- I successfully compiled and ran all changed examples.
## Migration Guide
The following methods on `Camera` now return a `Result` instead of an
`Option` so that they can provide more information about failures:
- `world_to_viewport`
- `world_to_viewport_with_depth`
- `viewport_to_world`
- `viewport_to_world_2d`
Call `.ok()` on the `Result` to turn it back into an `Option`, or handle
the `Result` directly.
---------
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- Fixes#14902
- > #14686 Introduced a name clash when using use bevy::prelude::*;
## Solution
- renamed `bevy::picking::events::Drop`
`bevy::picking::events::DragDrop`
## Testing
- Not being used in tests or examples, so I just compiled.
---
</details>
## Migration Guide
- Rename `Drop` to `DragDrop`
- `bevy::picking::events::Drop` is now `bevy::picking::events::DragDrop`
# Objective
Fixes#14883
## Solution
Pretty simple update to `EntityCommands` methods to consume `self` and
return it rather than taking `&mut self`. The things probably worth
noting:
* I added `#[allow(clippy::should_implement_trait)]` to the `add` method
because it causes a linting conflict with `std::ops::Add`.
* `despawn` and `log_components` now return `Self`. I'm not sure if
that's exactly the desired behavior so I'm happy to adjust if that seems
wrong.
## Testing
Tested with `cargo run -p ci`. I think that should be sufficient to call
things good.
## Migration Guide
The most likely migration needed is changing code from this:
```
let mut entity = commands.get_or_spawn(entity);
if depth_prepass {
entity.insert(DepthPrepass);
}
if normal_prepass {
entity.insert(NormalPrepass);
}
if motion_vector_prepass {
entity.insert(MotionVectorPrepass);
}
if deferred_prepass {
entity.insert(DeferredPrepass);
}
```
to this:
```
let mut entity = commands.get_or_spawn(entity);
if depth_prepass {
entity = entity.insert(DepthPrepass);
}
if normal_prepass {
entity = entity.insert(NormalPrepass);
}
if motion_vector_prepass {
entity = entity.insert(MotionVectorPrepass);
}
if deferred_prepass {
entity.insert(DeferredPrepass);
}
```
as can be seen in several of the example code updates here. There will
probably also be instances where mutable `EntityCommands` vars no longer
need to be mutable.
# Objective
Add `bevy_picking` sprite backend as part of the `bevy_mod_picking`
upstreamening (#12365).
## Solution
More or less a copy/paste from `bevy_mod_picking`, with the changes
[here](https://github.com/aevyrie/bevy_mod_picking/pull/354). I'm
putting that link here since those changes haven't yet made it through
review, so should probably be reviewed on their own.
## Testing
I couldn't find any sprite-backend-specific tests in `bevy_mod_picking`
and unfortunately I'm not familiar enough with Bevy's testing patterns
to write tests for code that relies on windowing and input. I'm willing
to break the pointer hit system into testable blocks and add some more
modular tests if that's deemed important enough to block, otherwise I
can open an issue for adding tests as follow-up.
## Follow-up work
- More docs/tests
- Ignore pick events on transparent sprite pixels with potential opt-out
---------
Co-authored-by: Aevyrie <aevyrie@gmail.com>
Makes the newly merged picking usable for UI elements.
currently it both triggers the events, as well as sends them as throught
commands.trigger_targets. We should probably figure out if this is
needed for them all.
# Objective
Hooks up obserers and picking for a very simple example
## Solution
upstreamed the UI picking backend from bevy_mod_picking
## Testing
tested with the new example picking/simple_picking.rs
---
---------
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
Ci fixed version of: #14541
Upstream the remainder of bevy_picking_core and all of
bevy_picking_input.
This work is intentionally nonfunctional and has minimal changes, but
does compile. More work is necessary to replace bevy_eventlistener with
propagating observers.
This work is being coordinated as part of "bevy_mod_picking upstream"
working group. Come say hi on discord!
---------
Co-authored-by: Miles Silberling-Cook <nth.tensor@gmail.com>
Co-authored-by: Aevyrie <aevyrie@gmail.com>
# Objective
- Bevy currently has lot of invalid intra-doc links, let's fix them!
- Also make CI test them, to avoid future regressions.
- Helps with #1983 (but doesn't fix it, as there could still be explicit
links to docs.rs that are broken)
## Solution
- Make `cargo r -p ci -- doc-check` check fail on warnings (could also
be changed to just some specific lints)
- Manually fix all the warnings (note that in some cases it was unclear
to me what the fix should have been, I'll try to highlight them in a
self-review)
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
This is the first of a series of PRs intended to begin the upstreaming
process for `bevy_mod_picking`. The purpose of this PR is to:
+ Create the new `bevy_picking` crate
+ Upstream `CorePlugin` as `PickingPlugin`
+ Upstream the core pointer and backend abstractions.
This code has been ported verbatim from the corresponding files in
[bevy_picking_core](https://github.com/aevyrie/bevy_mod_picking/tree/main/crates/bevy_picking_core/src)
with a few tiny naming and docs tweaks.
The work here is only an initial foothold to get the up-streaming
process started in earnest. We can do refactoring and improvements once
this is in-tree.
---------
Co-authored-by: Aevyrie <aevyrie@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
