# Objective
Add a way to use the gizmo API in a retained manner, for increased
performance.
## Solution
- Move gizmo API from `Gizmos` to `GizmoBuffer`, ~ab~using `Deref` to
keep usage the same as before.
- Merge non-strip and strip variant of `LineGizmo` into one, storing the
data in a `GizmoBuffer` to have the same API for retained `LineGizmo`s.
### Review guide
- The meat of the changes are in `lib.rs`, `retained.rs`, `gizmos.rs`,
`pipeline_3d.rs` and `pipeline_2d.rs`
- The other files contain almost exclusively the churn from moving the
gizmo API from `Gizmos` to `GizmoBuffer`
## Testing
### Performance
Performance compared to the immediate mode API is from 65 to 80 times
better for static lines.
```
7900 XTX, 3700X
1707.9k lines/ms: gizmos_retained (21.3ms)
3488.5k lines/ms: gizmos_retained_continuous_polyline (31.3ms)
0.5k lines/ms: gizmos_retained_separate (97.7ms)
3054.9k lines/ms: bevy_polyline_retained_nan (16.8ms)
3596.3k lines/ms: bevy_polyline_retained_continuous_polyline (14.2ms)
0.6k lines/ms: bevy_polyline_retained_separate (78.9ms)
26.9k lines/ms: gizmos_immediate (14.9ms)
43.8k lines/ms: gizmos_immediate_continuous_polyline (18.3ms)
```
Looks like performance is good enough, being close to par with
`bevy_polyline`.
Benchmarks can be found here:
This branch:
https://github.com/tim-blackbird/line_racing/tree/retained-gizmos
Bevy 0.14: https://github.com/DGriffin91/line_racing
## Showcase
```rust
fn setup(
mut commands: Commands,
mut gizmo_assets: ResMut<Assets<GizmoAsset>>
) {
let mut gizmo = GizmoAsset::default();
// A sphere made out of one million lines!
gizmo
.sphere(default(), 1., CRIMSON)
.resolution(1_000_000 / 3);
commands.spawn(Gizmo {
handle: gizmo_assets.add(gizmo),
..default()
});
}
```
## Follow-up work
- Port over to the retained rendering world proper
- Calculate visibility and cull `Gizmo`s
# Objective
We currently use special "floating" constructors for `EasingCurve`,
`FunctionCurve`, and `ConstantCurve` (ex: `easing_curve`). This erases
the type being created (and in general "what is happening"
structurally), for very minimal ergonomics improvements. With rare
exceptions, we prefer normal `X::new()` constructors over floating `x()`
constructors in Bevy. I don't think this use case merits special casing
here.
## Solution
Add `EasingCurve::new()`, use normal constructors everywhere, and remove
the floating constructors.
I think this should land in 0.15 in the interest of not breaking people
later.
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
Fixes#15834
## Migration Guide
The APIs of `Time`, `Timer` and `Stopwatch` have been cleaned up for
consistency with each other and the standard library's `Duration` type.
The following methods have been renamed:
- `Stowatch::paused` -> `Stopwatch::is_paused`
- `Time::elapsed_seconds` -> `Time::elasped_secs` (including `_f64` and
`_wrapped` variants)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Several of our APIs (namely gizmos and bounding) use isometries on
current Bevy main. This is nicer than separate properties in a lot of
cases, but users have still expressed usability concerns.
One problem is that in a lot of cases, you only care about e.g.
translation, so you end up with this:
```rust
gizmos.cross_2d(
Isometry2d::from_translation(Vec2::new(-160.0, 120.0)),
12.0,
FUCHSIA,
);
```
The isometry adds quite a lot of length and verbosity, and isn't really
that relevant since only the translation is important here.
It would be nice if you could use the translation directly, and only
supply an isometry if both translation and rotation are needed. This
would make the following possible:
```rust
gizmos.cross_2d(Vec2::new(-160.0, 120.0), 12.0, FUCHSIA);
```
removing a lot of verbosity.
## Solution
Implement `From<Vec2>` and `From<Rot2>` for `Isometry2d`, and
`From<Vec3>`, `From<Vec3A>`, and `From<Quat>` for `Isometry3d`. These
are lossless conversions that fit the semantics of `From`.
This makes the proposed API possible! The methods must now simply take
an `impl Into<IsometryNd>`, and this works:
```rust
gizmos.cross_2d(Vec2::new(-160.0, 120.0), 12.0, FUCHSIA);
```
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
# Objective
- Fixes#15236
## Solution
- Use bevy_math::ops instead of std floating point operations.
## Testing
- Did you test these changes? If so, how?
Unit tests and `cargo run -p ci -- test`
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Execute `cargo run -p ci -- test` on Windows.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Windows
## Migration Guide
- Not a breaking change
- Projects should use bevy math where applicable
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- Add gizmos integration for the new `Curve` things in the math lib
## Solution
- Add the following methods
- `curve_2d(curve, sample_times, color)`
- `curve_3d(curve, sample_times, color)`
- `curve_gradient_2d(curve, sample_times_with_colors)`
- `curve_gradient_3d(curve, sample_times_with_colors)`
## Testing
- I added examples of the 2D and 3D variants of the gradient curve
gizmos to the gizmos examples.
## Showcase
### 2D
```rust
let domain = Interval::EVERYWHERE;
let curve = function_curve(domain, |t| Vec2::new(t, (t / 25.0).sin() * 100.0));
let resolution = ((time.elapsed_seconds().sin() + 1.0) * 50.0) as usize;
let times_and_colors = (0..=resolution)
.map(|n| n as f32 / resolution as f32)
.map(|t| (t - 0.5) * 600.0)
.map(|t| (t, TEAL.mix(&HOT_PINK, (t + 300.0) / 600.0)));
gizmos.curve_gradient_2d(curve, times_and_colors);
```
### 3D
```rust
let domain = Interval::EVERYWHERE;
let curve = function_curve(domain, |t| {
(Vec2::from((t * 10.0).sin_cos())).extend(t - 6.0)
});
let resolution = ((time.elapsed_seconds().sin() + 1.0) * 100.0) as usize;
let times_and_colors = (0..=resolution)
.map(|n| n as f32 / resolution as f32)
.map(|t| t * 5.0)
.map(|t| (t, TEAL.mix(&HOT_PINK, t / 5.0)));
gizmos.curve_gradient_3d(curve, times_and_colors);
```
# Objective
Since https://github.com/bevyengine/bevy/pull/14731 is merged, it
unblocked a few utility methods for 2D arcs. In 2D the pendant to
`long_arc_3d_between` and `short_arc_3d_between` are missing. Since
`arc_2d` can be a bit hard to use, this PR is trying to plug some holes
in the `arcs` API.
## Solution
Implement
- `long_arc_2d_between(center, from, tp, color)`
- `short_arc_2d_between(center, from, tp, color)`
## Testing
- There are new doc tests
- The `2d_gizmos` example has been extended a bit to include a few more
arcs which can easily be checked with respect to the grid
---
## Showcase
Code related to the screenshot (from outer = first line to inner = last
line)
```rust
my_gizmos.arc_2d(Isometry2d::IDENTITY, FRAC_PI_2, 80.0, ORANGE_RED);
my_gizmos.short_arc_2d_between(Vec2::ZERO, Vec2::X * 40.0, Vec2::Y * 40.0, ORANGE_RED);
my_gizmos.long_arc_2d_between(Vec2::ZERO, Vec2::X * 20.0, Vec2::Y * 20.0, ORANGE_RED);
```
# Objective
- Solves the last bullet in and closes#14319
- Make better use of the `Isometry` types
- Prevent issues like #14655
- Probably simplify and clean up a lot of code through the use of Gizmos
as well (i.e. the 3D gizmos for cylinders circles & lines don't connect
well, probably due to wrong rotations)
## Solution
- go through the `bevy_gizmos` crate and give all methods a slight
workover
## Testing
- For all the changed examples I run `git switch main && cargo rr
--example <X> && git switch <BRANCH> && cargo rr --example <X>` and
compare the visual results
- Check if all doc tests are still compiling
- Check the docs in general and update them !!!
---
## Migration Guide
The gizmos methods function signature changes as follows:
- 2D
- if it took `position` & `rotation_angle` before ->
`Isometry2d::new(position, Rot2::radians(rotation_angle))`
- if it just took `position` before ->
`Isometry2d::from_translation(position)`
- 3D
- if it took `position` & `rotation` before ->
`Isometry3d::new(position, rotation)`
- if it just took `position` before ->
`Isometry3d::from_translation(position)`
# Objective
`arc_2d` wasn't actually doing what the docs were saying. The arc wasn't
offset by what was previously `direction_angle` but by `direction_angle
- arc_angle / 2.0`. This meant that the arcs center was laying on the
`Vec2::Y` axis and then it was offset. This was probably done to fit the
behavior of the `Arc2D` primitive. I would argue that this isn't
desirable for the plain `arc_2d` gizmo method since
- a) the docs get longer to explain the weird centering
- b) the mental model the user has to know gets bigger with more
implicit assumptions
given the code
```rust
my_gizmos.arc_2d(Vec2::ZERO, 0.0, FRAC_PI_2, 75.0, ORANGE_RED);
```
we get
where after the fix with
```rust
my_gizmos.arc_2d(Isometry2d::IDENTITY, FRAC_PI_2, 75.0, ORANGE_RED);
```
we get
To get the same result with the previous implementation you would have
to randomly add `arc_angle / 2.0` to the `direction_angle`.
```rust
my_gizmos.arc_2d(Vec2::ZERO, FRAC_PI_4, FRAC_PI_2, 75.0, ORANGE_RED);
```
This makes constructing similar helping functions as they already exist
in 3D like
- `long_arc_2d_between`
- `short_arc_2d_between`
much harder.
## Solution
- Make the arc really start at `Vec2::Y * radius` in counter-clockwise
direction + offset by an angle as the docs state it
- Use `Isometry2d` instead of `position : Vec2` and `direction_angle :
f32` to reduce the chance of messing up rotation/translation
- Adjust the docs for the changes above
- Adjust the gizmo rendering of some primitives
## Testing
- check `2d_gizmos.rs` and `render_primitives.rs` examples
## Migration Guide
- users have to adjust their usages of `arc_2d`:
- before:
```rust
arc_2d(
pos,
angle,
arc_angle,
radius,
color
)
```
- after:
```rust
arc_2d(
// this `+ arc_angle * 0.5` quirk is only if you want to preserve the
previous behavior
// with the new API.
// feel free to try to fix this though since your current calls to this
function most likely
// involve some computations to counter-act that quirk in the first
place
Isometry2d::new(pos, Rot2::radians(angle + arc_angle * 0.5),
arc_angle,
radius,
color
)
```
# Objective
- The default font size is too small to be useful in examples or for
debug text.
- Fixes#13587
## Solution
- Updated the default font size value in `TextStyle` from 12px to 24px.
- Resorted to Text defaults in examples to use the default font size in
most of them.
## Testing
- WIP
---
## Migration Guide
- The default font size has been increased to 24px from 12px. Make sure
you set the font to the appropriate values in places you were using
`Default` text style.
# Objective
- Fixes#13412
## Solution
- Renamed `segments` in `bevy_gizmos` to `resolution` and adjusted
examples
## Migration Guide
- When working with gizmos, replace all calls to `.segments(...)` with
`.resolution(...)`
# Objective
- Implement rounded cuboids and rectangles, suggestion of #9400
## Solution
- Added `Gizmos::rounded_cuboid`, `Gizmos::rounded_rect` and
`Gizmos::rounded_rect_2d`.
- All of these return builders that allow configuring of the corner/edge
radius using `.corner_radius(...)` or `.edge_radius(...)` as well as the
line segments of each arc using `.arc_segments(...)`.
---
## Changelog
- Added a new `rounded_box` module to `bevy_gizmos` containing all of
the above methods and builders.
- Updated the examples `2d_gizmos` and `3d_gizmos`
## Additional information
The 3d example now looks like this:
<img width="1440" alt="Screenshot 2024-02-28 at 01 47 28"
src="https://github.com/bevyengine/bevy/assets/62256001/654e30ca-c091-4f14-a402-90138e95c71b">
And this is the updated 2d example showcasing negative corner radius:
<img width="1440" alt="Screenshot 2024-02-28 at 01 59 37"
src="https://github.com/bevyengine/bevy/assets/62256001/3904697a-5462-4ee7-abd9-3e893ca07082">
<img width="1440" alt="Screenshot 2024-02-28 at 01 59 47"
src="https://github.com/bevyengine/bevy/assets/62256001/a8892cfd-3aad-4c0c-87eb-559c17c8864c">
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: James Gayfer <10660608+jgayfer@users.noreply.github.com>
# Objective
- Adds line styles to bevy gizmos, suggestion of #9400
- Currently solid and dotted lines are implemented but this can easily
be extended to support dashed lines as well if that is wanted.
## Solution
- Adds the enum `GizmoLineStyle` and uses it in each `GizmoConfig` to
configure the style of the line.
- Each "dot" in a dotted line has the same width and height as the
`line_width` of the corresponding line.
---
## Changelog
- Added `GizmoLineStyle` to `bevy_gizmos`
- Added a `line_style: GizmoLineStyle ` attribute to `GizmoConfig`
- Updated the `lines.wgsl` shader and the pipelines accordingly.
## Migration Guide
- Any manually created `GizmoConfig` must now include the `line_style`
attribute
## Additional information
Some pretty pictures :)
This is the 3d_gizmos example with/without `line_perspective`:
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 53"
src="https://github.com/bevyengine/bevy/assets/62256001/b1b97311-e78d-4de3-8dfe-9e48a35bb27d">
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 39"
src="https://github.com/bevyengine/bevy/assets/62256001/50ee8ecb-5290-484d-ba36-7fd028374f7f">
And the 2d example:
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 06"
src="https://github.com/bevyengine/bevy/assets/62256001/4452168f-d605-4333-bfa5-5461d268b132">
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
- Adds 3d grids, suggestion of #9400
## Solution
- Added 3d grids (grids spanning all three dimensions, not flat grids)
to bevy_gizmos
---
## Changelog
- `gizmos.grid(...)` and `gizmos.grid_2d(...)` now return a
`GridBuilder2d`.
- Added `gizmos.grid_3d(...)` which returns a `GridBuilder3d`.
- The difference between them is basically only that `GridBuilder3d`
exposes some methods for configuring the z axis while the 2d version
doesn't.
- Allowed for drawing the outer edges along a specific axis by calling
`.outer_edges_x()`, etc. on the builder.
## Additional information
Please note that I have not added the 3d grid to any example as not to
clutter them.
Here is an image of what the 3d grid looks like:
<img width="1440" alt="Screenshot 2024-03-12 at 02 19 55"
src="https://github.com/bevyengine/bevy/assets/62256001/4cd3b7de-cf2c-4f05-8a79-920a4dd804b8">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Adds gizmo line joints, suggestion of #9400
## Solution
- Adds `line_joints: GizmoLineJoint` to `GizmoConfig`. Currently the
following values are supported:
- `GizmoLineJoint::None`: does not draw line joints, same behaviour as
previously
- `GizmoLineJoint::Bevel`: draws a single triangle between the lines
- `GizmoLineJoint::Miter` / 'spiky joints': draws two triangles between
the lines extending them until they meet at a (miter) point.
- NOTE: for very small angles between the lines, which happens
frequently in 3d, the miter point will be very far away from the point
at which the lines meet.
- `GizmoLineJoint::Round(resolution)`: Draw a circle arc between the
lines. The circle is a triangle fan of `resolution` triangles.
---
## Changelog
- Added `GizmoLineJoint`, use that in `GizmoConfig` and added necessary
pipelines and draw commands.
- Added a new `line_joints.wgsl` shader containing three vertex shaders
`vertex_bevel`, `vertex_miter` and `vertex_round` as well as a basic
`fragment` shader.
## Migration Guide
Any manually created `GizmoConfig`s must now set the `.line_joints`
field.
## Known issues
- The way we currently create basic closed shapes like rectangles,
circles, triangles or really any closed 2d shape means that one of the
corners will not be drawn with joints, although that would probably be
expected. (see the triangle in the 2d image)
- This could be somewhat mitigated by introducing line caps or fixed by
adding another segment overlapping the first of the strip. (Maybe in a
followup PR?)
- 3d shapes can look 'off' with line joints (especially bevel) because
wherever 3 or more lines meet one of them may stick out beyond the joint
drawn between the other 2.
- Adding additional lines so that there is a joint between every line at
a corner would fix this but would probably be too computationally
expensive.
- Miter joints are 'unreasonably long' for very small angles between the
lines (the angle is the angle between the lines in screen space). This
is technically correct but distracting and does not feel right,
especially in 3d contexts. I think limiting the length of the miter to
the point at which the lines meet might be a good idea.
- The joints may be drawn with a different gizmo in-between them and
their corresponding lines in 2d. Some sort of z-ordering would probably
be good here, but I believe this may be out of scope for this PR.
## Additional information
Some pretty images :)
<img width="1175" alt="Screenshot 2024-03-02 at 04 53 50"
src="https://github.com/bevyengine/bevy/assets/62256001/58df7e63-9376-4430-8871-32adba0cb53b">
- Note that the top vertex does not have a joint drawn.
<img width="1440" alt="Screenshot 2024-03-02 at 05 03 55"
src="https://github.com/bevyengine/bevy/assets/62256001/137a00cf-cbd4-48c2-a46f-4b47492d4fd9">
Now for a weird video:
https://github.com/bevyengine/bevy/assets/62256001/93026f48-f1d6-46fe-9163-5ab548a3fce4
- The black lines shooting out from the cube are miter joints that get
very long because the lines between which they are drawn are (almost)
collinear in screen space.
---------
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
Fixes#12225
Prior to the `bevy_color` port, `GREEN` used to mean "full green." But
it is now a much darker color matching the css1 spec.
## Solution
Change usages of `basic::GREEN` or `css::GREEN` to `LIME` to restore the
examples to their former colors.
This also removes the duplicate definition of `GREEN` from `css`. (it
was already re-exported from `basic`)
## Note
A lot of these examples could use nicer colors. I'm not trying to do
that here.
"Dark Grey" will be tackled separately and has its own tracking issue.
# Objective
- As part of the migration process we need to a) see the end effect of
the migration on user ergonomics b) check for serious perf regressions
c) actually migrate the code
- To accomplish this, I'm going to attempt to migrate all of the
remaining user-facing usages of `LegacyColor` in one PR, being careful
to keep a clean commit history.
- Fixes#12056.
## Solution
I've chosen to use the polymorphic `Color` type as our standard
user-facing API.
- [x] Migrate `bevy_gizmos`.
- [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs
- [x] Migrate sprites
- [x] Migrate UI
- [x] Migrate `ColorMaterial`
- [x] Migrate `MaterialMesh2D`
- [x] Migrate fog
- [x] Migrate lights
- [x] Migrate StandardMaterial
- [x] Migrate wireframes
- [x] Migrate clear color
- [x] Migrate text
- [x] Migrate gltf loader
- [x] Register color types for reflection
- [x] Remove `LegacyColor`
- [x] Make sure CI passes
Incidental improvements to ease migration:
- added `Color::srgba_u8`, `Color::srgba_from_array` and friends
- added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the
`Alpha` trait
- add and immediately deprecate (lol) `Color::rgb` and friends in favor
of more explicit and consistent `Color::srgb`
- standardized on white and black for most example text colors
- added vector field traits to `LinearRgba`: ~~`Add`, `Sub`,
`AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications
and divisions do not scale alpha. `Add` and `Sub` have been cut from
this PR.
- added `LinearRgba` and `Srgba` `RED/GREEN/BLUE`
- added `LinearRgba_to_f32_array` and `LinearRgba::to_u32`
## Migration Guide
Bevy's color types have changed! Wherever you used a
`bevy::render::Color`, a `bevy::color::Color` is used instead.
These are quite similar! Both are enums storing a color in a specific
color space (or to be more precise, using a specific color model).
However, each of the different color models now has its own type.
TODO...
- `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`,
`Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`,
`Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`.
- `Color::set_a` and `Color::a` is now `Color::set_alpha` and
`Color::alpha`. These are part of the `Alpha` trait in `bevy_color`.
- `Color::is_fully_transparent` is now part of the `Alpha` trait in
`bevy_color`
- `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for
`g`, `b` `h`, `s` and `l` have been removed due to causing silent
relatively expensive conversions. Convert your `Color` into the desired
color space, perform your operations there, and then convert it back
into a polymorphic `Color` enum.
- `Color::hex` is now `Srgba::hex`. Call `.into` or construct a
`Color::Srgba` variant manually to convert it.
- `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`,
`ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now
store a `LinearRgba`, rather than a polymorphic `Color`
- `Color::rgb_linear` and `Color::rgba_linear` are now
`Color::linear_rgb` and `Color::linear_rgba`
- The various CSS color constants are no longer stored directly on
`Color`. Instead, they're defined in the `Srgba` color space, and
accessed via `bevy::color::palettes::css`. Call `.into()` on them to
convert them into a `Color` for quick debugging use, and consider using
the much prettier `tailwind` palette for prototyping.
- The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with
the standard naming.
- Vector field arithmetic operations on `Color` (add, subtract, multiply
and divide by a f32) have been removed. Instead, convert your colors
into `LinearRgba` space, and perform your operations explicitly there.
This is particularly relevant when working with emissive or HDR colors,
whose color channel values are routinely outside of the ordinary 0 to 1
range.
- `Color::as_linear_rgba_f32` has been removed. Call
`LinearRgba::to_f32_array` instead, converting if needed.
- `Color::as_linear_rgba_u32` has been removed. Call
`LinearRgba::to_u32` instead, converting if needed.
- Several other color conversion methods to transform LCH or HSL colors
into float arrays or `Vec` types have been removed. Please reimplement
these externally or open a PR to re-add them if you found them
particularly useful.
- Various methods on `Color` such as `rgb` or `hsl` to convert the color
into a specific color space have been removed. Convert into
`LinearRgba`, then to the color space of your choice.
- Various implicitly-converting color value methods on `Color` such as
`r`, `g`, `b` or `h` have been removed. Please convert it into the color
space of your choice, then check these properties.
- `Color` no longer implements `AsBindGroup`. Store a `LinearRgba`
internally instead to avoid conversion costs.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- Implement grid gizmos, suggestion of #9400
## Solution
- Added `gizmos.grid(...) ` and `gizmos.grid_2d(...)`
- The grids may be configured using `.outer_edges(...)` to specify
whether to draw the outer border/edges of the grid and `.skew(...)`to
specify the skew of the grid along the x or y directions.
---
## Changelog
- Added a `grid` module to `bevy_gizmos` containing `gizmos.grid(...) `
and `gizmos.grid_2d(...)` as well as assorted items.
- Updated the `2d_gizmos` and `3d_gizmos` examples to use grids.
## Additional
The 2D and 3D examples now look like this:
<img width="1440" alt="Screenshot 2024-02-20 at 15 09 40"
src="https://github.com/bevyengine/bevy/assets/62256001/ce04191e-d839-4faf-a6e3-49b6bb4b922b">
<img width="1440" alt="Screenshot 2024-02-20 at 15 10 07"
src="https://github.com/bevyengine/bevy/assets/62256001/317459ba-d452-42eb-ae95-7c84cdbd569b">
# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Move Gizmo examples into the separate directory
Fixes#11899
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
