# Objective
Relevant issue: #4474
Currently glam types implement Reflect as a value, which is problematic for reflection, making scripting/editor work much more difficult. This PR re-implements them as structs.
## Solution
Added a new proc macro, `impl_reflect_struct`, which replaces `impl_reflect_value` and `impl_from_reflect_value` for glam types. This macro could also be used for other types, but I don't know of any that would require it. It's specifically useful for foreign types that cannot derive Reflect normally.
---
## Changelog
### Added
- `impl_reflect_struct` proc macro
### Changed
- Glam reflect impls have been replaced with `impl_reflect_struct`
- from_reflect's `impl_struct` altered to take an optional custom constructor, allowing non-default non-constructible foreign types to use it
- Calls to `impl_struct` altered to conform to new signature
- Altered glam types (All vec/mat combinations) have a different serialization structure, as they are reflected differently now.
## Migration Guide
This will break altered glam types serialized to RON scenes, as they will expect to be serialized/deserialized as structs rather than values now. A future PR to add custom serialization for non-value types is likely on the way to restore previous behavior. Additionally, calls to `impl_struct` must add a `None` parameter to the end of the call to restore previous behavior.
Co-authored-by: PROMETHIA-27 <42193387+PROMETHIA-27@users.noreply.github.com>
Required for https://github.com/bevyengine/bevy/pull/4402.
# Objective
- derived `SystemParam` implementations were never `ReadOnlySystemParamFetch`
- We want them to be, e.g. for `EventReader`
## Solution
- If possible, 'forward' the impl of `ReadOnlySystemParamFetch`.
# Objective
- (Eventually) reduce noise in reporting access conflicts between unordered systems.
- `SystemStage` only looks at unfiltered `ComponentId` access, any conflicts reported are potentially `false`.
- the systems could still be accessing disjoint archetypes
- Comparing systems' filtered access sets can maybe avoid that (for statically known component types).
- #4204
## Solution
- Modify `SparseSetIndex` trait to require `PartialEq`, `Eq`, and `Hash` (all internal types except `BundleId` already did).
- Add `is_compatible` and `get_conflicts` methods to `FilteredAccessSet<T>`
- (existing method renamed to `get_conflicts_single`)
- Add docs for those and all the other methods while I'm at it.
## Objective
- ~~Make absurdly long-lived changes stay detectable for even longer (without leveling up to `u64`).~~
- Give all changes a consistent maximum lifespan.
- Improve code clarity.
## Solution
- ~~Increase the frequency of `check_tick` scans to increase the oldest reliably-detectable change.~~
(Deferred until we can benchmark the cost of a scan.)
- Ignore changes older than the maximum reliably-detectable age.
- General refactoring—name the constants, use them everywhere, and update the docs.
- Update test cases to check for the specified behavior.
## Related
This PR addresses (at least partially) the concerns raised in:
- #3071
- #3082 (and associated PR #3084)
## Background
- #1471
Given the minimum interval between `check_ticks` scans, `N`, the oldest reliably-detectable change is `u32::MAX - (2 * N - 1)` (or `MAX_CHANGE_AGE`). Reducing `N` from ~530 million (current value) to something like ~2 million would extend the lifetime of changes by a billion.
| minimum `check_ticks` interval | oldest reliably-detectable change | usable % of `u32::MAX` |
| --- | --- | --- |
| `u32::MAX / 8` (536,870,911) | `(u32::MAX / 4) * 3` | 75.0% |
| `2_000_000` | `u32::MAX - 3_999_999` | 99.9% |
Similarly, changes are still allowed to be between `MAX_CHANGE_AGE`-old and `u32::MAX`-old in the interim between `check_tick` scans. While we prevent their age from overflowing, the test to detect changes still compares raw values. This makes failure ultimately unreliable, since when ancient changes stop being detected varies depending on when the next scan occurs.
## Open Question
Currently, systems and system states are incorrectly initialized with their `last_change_tick` set to `0`, which doesn't handle wraparound correctly.
For consistent behavior, they should either be initialized to the world's `last_change_tick` (and detect no changes) or to `MAX_CHANGE_AGE` behind the world's current `change_tick` (and detect everything as a change). I've currently gone with the latter since that was closer to the existing behavior.
## Follow-up Work
(Edited: entire section)
We haven't actually profiled how long a `check_ticks` scan takes on a "large" `World` , so we don't know if it's safe to increase their frequency. However, we are currently relying on play sessions not lasting long enough to trigger a scan and apps not having enough entities/archetypes for it to be "expensive" (our assumption). That isn't a real solution. (Either scanning never costs enough to impact frame times or we provide an option to use `u64` change ticks. Nobody will accept random hiccups.)
To further extend the lifetime of changes, we actually only need to increment the world tick if a system has `Fetch: !ReadOnlySystemParamFetch`. The behavior will be identical because all writes are sequenced, but I'm not sure how to implement that in a way that the compiler can optimize the branch out.
Also, since having no false positives depends on a `check_ticks` scan running at least every `2 * N - 1` ticks, a `last_check_tick` should also be stored in the `World` so that any lull in system execution (like a command flush) could trigger a scan if needed. To be completely robust, all the systems initialized on the world should be scanned, not just those in the current stage.
# Objective
- Add two missing ogg vorbis audio extensions.
## Solution
- Add the two missing extensions to the list
- The file format is the same, there are simply two other possible extensions files can use.
- This can be easily (manually) tested by renaming the extension of `assets/sounds/Windless Slopes.ogg` to end in either `.oga` or `.spx` (in both the filesystem and in `examples/audio/audio.rs`) and then running `cargo run --example audio` and observing that the music still plays.
## More info
From the [wikipedia article for Ogg](https://en.wikipedia.org/wiki/Ogg):
> Ogg audio media is registered as [IANA](https://en.wikipedia.org/wiki/Internet_Assigned_Numbers_Authority) [media type](https://en.wikipedia.org/wiki/Media_type) audio/ogg with file extensions .oga, .ogg, and [.spx](https://en.wikipedia.org/wiki/Speex).
The current workaround is to rename any files ending in `.oga` or `.spx` to end in `.ogg` instead, which complicates tracking assets procured from other organizations.
See also [a corresponding change to bevy_kira_audio](https://github.com/NiklasEi/bevy_kira_audio/pull/8)
---
## Changelog
### Added
- Vorbis audio files may now use the `.oga` and `.spx` filename extensions in addition to the more common `.ogg` filename extension.
# Objective
It is possible to get a mutable reference to a `TypeRegistration` using
`TypeRegistry::get_mut`. However, none of its other methods
(`get_mut_with_name`, `get_type_data`, `iter`, etc.) have mutable
versions.
Besides improving consistency, this change would facilitate use cases
which involve storing mutable state data in the `TypeRegistry`.
## Solution
Provides a trivial wrapper around the mutable accessors that the
`TypeRegistration` already provides. Exactly mirrors the existing
immutable versions.
# Objective
Make it easy to get position and index data from Meshes.
## Solution
It was previously possible to get the mesh data by manually matching on `Mesh::VertexAttributeValues` and `Mesh::Indices`as in the bodies of these two methods (`VertexAttributeValues::as_float3(&self)` and `Indices::iter(&self)`), but that's needless duplication that making these methods `pub` fixes.
# Objective
- Remove `Resource` binding on events, introduce a new `Event` trait
- Ensure event iterators are `ExactSizeIterator`
## Solution
- Builds on #2382 and #2969
## Changelog
- Events<T>, EventWriter<T>, EventReader<T> and so on now require that the underlying type is Event, rather than Resource. Both of these are trivial supertraits of Send + Sync + 'static with universal blanket implementations: this change is currently purely cosmetic.
- Event reader iterators now implement ExactSizeIterator
In a `PluginGroupBuilder`, when adding a plugin that was already in the group (potentially disabled), it was then added twice to the app builder when calling `finish`. As the plugin is kept in an `HashMap`, it is not possible to have the same plugins twice with different configuration.
This PR updates the order of the plugin group so that each plugin is present only once.
Co-authored-by: François <8672791+mockersf@users.noreply.github.com>
# Objective
- New PRs are labeled with Needs-Triage, but this is unhelpful and creates busy work: it's just as easy to check for unlabelled PRs, especially now that we no longer have an unlabelled backlog.
Note: this is not true for issues. Issues start with at least one label based on which template they use, and so there's no good way to filter for issues that need attention from the triage team.
## Solution
- Remove responsible CI tasks.
# Objective
- noticed a few Vec3 and Vec2 that could be const
## Solution
- Declared them as const
- It seems to make a tiny improvement in example `many_light`, but given that the change is not complex at all it could still be worth it
# Objective
We have some macros that are public but only used internally for now. They fail on user's code due to the use of crate names like `bevy_utils`, while the user only has `bevy::utils`. There are two affected macros.
- `bevy_utils::define_label`: it may be useful in user's code for defining custom kinds of label traits (this is why I made this PR).
- `bevy_asset::load_internal_asset`: not useful currently due to limitations of the debug asset server, but this may change in the future.
## Solution
We can make them work by using `$crate` instead of names of their own crates, which can refer to the macro's defining crate regardless of the user's setup. Even though our objective is rather low-priority here, the solution adds no maintenance cost so it is still worthwhile.
# Objective
- Have an easy way to compare spans between executions
## Solution
- Add a tool to compare spans from chrome traces
```bash
> cargo run --release -p spancmp -- --help
Compiling spancmp v0.1.0
Finished release [optimized] target(s) in 1.10s
Running `target/release/spancmp --help`
spancmp
USAGE:
spancmp [OPTIONS] <TRACE> [SECOND_TRACE]
ARGS:
<TRACE>
<SECOND_TRACE>
OPTIONS:
-h, --help Print help information
-p, --pattern <PATTERN> Filter spans by name matching the pattern
-t, --threshold <THRESHOLD> Filter spans that have an average shorther than the threshold
[default: 0]
```
for each span, it will display the count, minimum duration, average duration and max duration. It can be filtered by a pattern on the span name or by a minimum average duration.
just displaying a trace
comparing two traces
Co-authored-by: Robert Swain <robert.swain@gmail.com>
1. change `PtrMut::as_ptr(self)` and `OwnedPtr::as_ptr(self)` to take `&self`, otherwise printing the pointer will prevent doing anything else afterwards
2. make all `as_ptr` methods safe. There's nothing unsafe about obtaining a pointer, these kinds of methods are safe in std as well [str::as_ptr](https://doc.rust-lang.org/stable/std/primitive.str.html#method.as_ptr), [Rc::as_ptr](https://doc.rust-lang.org/stable/std/rc/struct.Rc.html#method.as_ptr)
3. rename `offset`/`add` to `byte_offset`/`byte_add`. The unprefixed methods in std add in increments of `std::mem::size_of::<T>`, not in bytes. There's a PR for rust to add these byte_ methods https://github.com/rust-lang/rust/pull/95643 and at the call site it makes it much more clear that you need to do `.byte_add(i * layout_size)` instead of `.add(i)`
# Objective
Fixes#3180, builds from https://github.com/bevyengine/bevy/pull/2898
## Solution
Support requesting a window to be closed and closing a window in `bevy_window`, and handle this in `bevy_winit`.
This is a stopgap until we move to windows as entites, which I'm sure I'll get around to eventually.
## Changelog
### Added
- `Window::close` to allow closing windows.
- `WindowClosed` to allow reacting to windows being closed.
### Changed
Replaced `bevy::system::exit_on_esc_system` with `bevy:🪟:close_on_esc`.
## Fixed
The app no longer exits when any window is closed. This difference is only observable when there are multiple windows.
## Migration Guide
`bevy::input::system::exit_on_esc_system` has been removed. Use `bevy:🪟:close_on_esc` instead.
`CloseWindow` has been removed. Use `Window::close` instead.
The `Close` variant has been added to `WindowCommand`. Handle this by closing the relevant window.
# Objective
Fixes#4556
## Solution
StorageBuffer must use the Size of the std430 representation to calculate the buffer size, as the std430 representation is the data that will be written to it.
# Objective
Add support for vertex colors
## Solution
This change is modeled after how vertex tangents are handled, so the shader is conditionally compiled with vertex color support if the mesh has the corresponding attribute set.
Vertex colors are multiplied by the base color. I'm not sure if this is the best for all cases, but may be useful for modifying vertex colors without creating a new mesh.
I chose `VertexFormat::Float32x4`, but I'd prefer 16-bit floats if/when support is added.
## Changelog
### Added
- Vertex colors can be specified using the `Mesh::ATTRIBUTE_COLOR` mesh attribute.
# Objective
Bevy users often want to create circles and other simple shapes.
All the machinery is in place to accomplish this, and there are external crates that help. But when writing code for e.g. a new bevy example, it's not really possible to draw a circle without bringing in a new asset, writing a bunch of scary looking mesh code, or adding a dependency.
In particular, this PR was inspired by this interaction in another PR: https://github.com/bevyengine/bevy/pull/3721#issuecomment-1016774535
## Solution
This PR adds `shape::RegularPolygon` and `shape::Circle` (which is just a `RegularPolygon` that defaults to a large number of sides)
## Discussion
There's a lot of ongoing discussion about shapes in <https://github.com/bevyengine/rfcs/pull/12> and at least one other lingering shape PR (although it seems incomplete).
That RFC currently includes `RegularPolygon` and `Circle` shapes, so I don't think that having working mesh generation code in the engine for those shapes would add much burden to an author of an implementation.
But if we'd prefer not to add additional shapes until after that's sorted out, I'm happy to close this for now.
## Alternatives for users
For any users stumbling on this issue, here are some plugins that will help if you need more shapes.
https://github.com/Nilirad/bevy_prototype_lyonhttps://github.com/johanhelsing/bevy_smudhttps://github.com/Weasy666/bevy_svghttps://github.com/redpandamonium/bevy_more_shapeshttps://github.com/ForesightMiningSoftwareCorporation/bevy_polyline
# Objective
- When spawning a sprite the alpha is used for transparency, but when using the `Color::into()` implementation to spawn a `StandardMaterial`, the alpha is ignored.
- Pretty much everytime I want to make something transparent I started with a `Color::rgb().into()` and I'm always surprised that it doesn't work when changing it to `Color::rgba().into()`
- It's possible there's an issue with this approach I am not thinking of, but I'm not sure what's the point of setting an alpha value without the goal of making a color transparent.
## Solution
- Set the alpha_mode to AlphaMode::Blend when the alpha is not the default value.
---
## Migration Guide
This is not a breaking change, but it can easily be migrated to reduce boilerplate
```rust
commands.spawn_bundle(PbrBundle {
mesh: meshes.add(shape::Cube::default().into()),
material: materials.add(StandardMaterial {
base_color: Color::rgba(1.0, 0.0, 0.0, 0.75),
alpha_mode: AlphaMode::Blend,
..default()
}),
..default()
});
// becomes
commands.spawn_bundle(PbrBundle {
mesh: meshes.add(shape::Cube::default().into()),
material: materials.add(Color::rgba(1.0, 0.0, 0.0, 0.75).into()),
..default()
});
```
Co-authored-by: Charles <IceSentry@users.noreply.github.com>
# Objective
The pointer types introduced in #3001 are useful not just in `bevy_ecs`, but also in crates like `bevy_reflect` (#4475) or even outside of bevy.
## Solution
Extract `Ptr<'a>`, `PtrMut<'a>`, `OwnedPtr<'a>`, `ThinSlicePtr<'a, T>` and `UnsafeCellDeref` from `bevy_ecs::ptr` into `bevy_ptr`.
**Note:** `bevy_ecs` still reexports the `bevy_ptr` as `bevy_ecs::ptr` so that crates like `bevy_transform` can use the `Bundle` derive without needing to depend on `bevy_ptr` themselves.
# Objective
- `RunOnce` was a manual `System` implementation.
- Adding run criteria to stages was yet to be systemyoten
## Solution
- Make it a normal function
- yeet
## Changelog
- Replaced `RunOnce` with `ShouldRun::once`
## Migration guide
The run criterion `RunOnce`, which would make the controlled systems run only once, has been replaced with a new run criterion function `ShouldRun::once`. Replace all instances of `RunOnce` with `ShouldRun::once`.
# Objective
The `Ptr` types gives free access to the underlying `NonNull<u8>`, which adds more publicly visible pointer wrangling than there needs to be. There are also a few edge cases where Ptr types could be more readily utilized for properly validating the soundness of ECS operations.
## Solution
- Replace `*Ptr(Mut)::inner` with `cast` which requires a concrete type to give the pointer. This function could also have a `debug_assert` with an alignment check to ensure that the pointer is aligned properly, but is currently not included.
- Use `OwningPtr::read` in ECS macros over casting the inner pointer around.
# Objective
- After #3412, `Camera::world_to_screen` got a little bit uglier to use by needing to provide both `Windows` and `Assets<Image>`, even though only one would be needed b697e73c3d/crates/bevy_render/src/camera/camera.rs (L117-L123)
- Some time, exact coordinates are not needed but normalized device coordinates is enough
## Solution
- Add a function to just get NDC
### Problem
It currently isn't possible to construct the default value of a reflected type. Because of that, it isn't possible to use `add_component` of `ReflectComponent` to add a new component to an entity because you can't know what the initial value should be.
### Solution
1. add `ReflectDefault` type
```rust
#[derive(Clone)]
pub struct ReflectDefault {
default: fn() -> Box<dyn Reflect>,
}
impl ReflectDefault {
pub fn default(&self) -> Box<dyn Reflect> {
(self.default)()
}
}
impl<T: Reflect + Default> FromType<T> for ReflectDefault {
fn from_type() -> Self {
ReflectDefault {
default: || Box::new(T::default()),
}
}
}
```
2. add `#[reflect(Default)]` to all component types that implement `Default` and are user facing (so not `ComputedSize`, `CubemapVisibleEntities` etc.)
This makes it possible to add the default value of a component to an entity without any compile-time information:
```rust
fn main() {
let mut app = App::new();
app.register_type::<Camera>();
let type_registry = app.world.get_resource::<TypeRegistry>().unwrap();
let type_registry = type_registry.read();
let camera_registration = type_registry.get(std::any::TypeId::of::<Camera>()).unwrap();
let reflect_default = camera_registration.data::<ReflectDefault>().unwrap();
let reflect_component = camera_registration
.data::<ReflectComponent>()
.unwrap()
.clone();
let default = reflect_default.default();
drop(type_registry);
let entity = app.world.spawn().id();
reflect_component.add_component(&mut app.world, entity, &*default);
let camera = app.world.entity(entity).get::<Camera>().unwrap();
dbg!(&camera);
}
```
### Open questions
- should we have `ReflectDefault` or `ReflectFromWorld` or both?
# Objective
- While optimising many_cubes, I noticed that all material handles are extracted regardless of whether the entity to which the handle belongs is visible or not. As such >100k handles are extracted when only <20k are visible.
## Solution
- Only extract material handles of visible entities.
- This improves `many_cubes -- sphere` from ~42fps to ~48fps. It reduces not only the extraction time but also system commands time. `Handle<StandardMaterial>` extraction and its system commands went from 0.522ms + 3.710ms respectively, to 0.267ms + 0.227ms an 88% reduction for this system for this case. It's very view dependent but...
# Objective
- Creating and executing render passes has GPU overhead. If there are no phase items in the render phase to draw, then this overhead should not be incurred as it has no benefit.
## Solution
- Check if there are no phase items to draw, and if not, do not construct not execute the render pass
---
## Changelog
- Changed: Do not create nor execute empty render passes
# Objective
- Original objective was to add doc build warning check to the ci local execution
- I somewhat deviated and changed other things...
## Solution
`cargo run -p ci` can now take more parameters:
* `format` - cargo fmt
* `clippy` - clippy
* `compile-fail` - bevy_ecs_compile_fail_tests tests
* `test` - tests but not doc tests and do not build examples
* `doc-test` - doc tests
* `doc-check` - doc build and warnings
* `bench-check` - check that benches build
* `example-check` - check that examples build
* `lints` - group - run lints and format and clippy
* `doc` - group - run doc-test and doc-check
* `compile` - group - run compile-fail and bench-check and example-check
* not providing a parameter will run everything
Ci is using those when possible:
* `build` jobs now don't run doc tests and don't build examples. it makes this job faster, but doc tests and examples are not built for each architecture target
* `ci` job doesn't run the `compile-fail` part but only format and clippy, taking less time
* `check-benches` becomes `check-compiles` and runs the `compile` tasks. It takes longer. I also fixed how it was using cache
* `check-doc` job is now independent and also run the doc tests, so it takes longer. I commented out the deadlinks check as it takes 2.5 minutes (to install) and doesn't work
# Objective
- Example was misleading, as we never import `bevy` itself in the engine (except in integration tests).
## Solution
- Clean up wording.
## Context
Noticed by @mockersf in #4608.
# Objective
1. Previously, the `change_tick` and `last_change_tick` fields on `SystemChangeTick` [were `pub`](https://docs.rs/bevy/0.6.1/bevy/ecs/system/struct.SystemChangeTick.html).
1. This was actively misleading, as while this can be fetched as a `SystemParam`, a copy is returned instead
2. This information could be useful for debugging, but there was no way to investigate when data was changed.
3. There were no docs!
## Solution
1. Move these to a getter method.
2. Add `last_changed` method to the `DetectChanges` trait to enable inspection of when data was last changed.
3. Add docs.
# Changelog
`SystemChangeTick` now provides getter methods for the current and previous change tick, rather than public fields.
This can be combined with `DetectChanges::last_changed()` to debug the timing of changes.
# Migration guide
The `change_tick` and `last_change_tick` fields on `SystemChangeTick` are now private, use the corresponding getter method instead.
# Objective
avoid naming collisions with user structs when deriving ``system_param``.
## Solution
~rename the fetch struct created by ``#[derive(system_param)]`` from ``{}State`` to ``{}SysParamState``.~
place the fetch struct into an anonymous scope.
## Migration Guide
For code that was using a system param's fetch struct, such as ``EventReader``'s ``EventReaderState``, the fetch struct can now be identified via the SystemParam trait associated type ``Fetch``, e.g. for ``EventReader<T>`` it can be identified as ``<EventReader<'static, 'static, T> as SystemParam>::Fetch``
Supercedes https://github.com/bevyengine/bevy/pull/3340, and absorbs the test from there.
# Objective
- Fixes#3329
## Solution
- If the `Children` component has changed, we currently do not have a way to know how it has changed.
- Therefore, we must update the hierarchy downwards from that point to be correct.
Co-authored-by: Daniel McNab <36049421+DJMcNab@users.noreply.github.com>
# Objective
Reflected tuples do not implement `GetTypeRegistration`, preventing us from registering our tuples, like:
```rust
app.register_type::<(i32, i32)>();
```
This is especially important for things like using #4042 to improve the scene format or implementing #4154 to recursively register fields.
## Solution
Added an implementation to the tuple macro:
```rust
impl<$($name: Reflect + for<'de> Deserialize<'de>),*> GetTypeRegistration for ($($name,)*) {
fn get_type_registration() -> TypeRegistration {
let mut registration = TypeRegistration::of::<($($name,)*)>();
registration.insert::<ReflectDeserialize>(FromType::<($($name,)*)>::from_type());
registration
}
}
```
This requires that the tuple's types implement `Deserialize`. This is exactly how `Vec` and `HashMap` handle it:
```rust
impl<T: FromReflect + for<'de> Deserialize<'de>> GetTypeRegistration for Vec<T> {
fn get_type_registration() -> TypeRegistration {
let mut registration = TypeRegistration::of::<Vec<T>>();
registration.insert::<ReflectDeserialize>(FromType::<Vec<T>>::from_type());
registration
}
}
```
This is a replacement for #2106
This adds a `Metadata` struct which contains metadata information about a file, at the moment only the file type.
It also adds a `get_metadata` to `AssetIo` trait and an `asset_io` accessor method to `AssetServer` and `LoadContext`
I am not sure about the changes in `AndroidAssetIo ` and `WasmAssetIo`.
# Objective
- Manually running systems is a somewhat obscure process: systems must be initialized before they are run
- The unwrap is rather hard to debug.
## Solution
- Replace unwraps in `FunctionSystem` methods with expects (progress towards #3892).
- Briefly document this requirement.
# Objective
- As requested here: https://github.com/bevyengine/bevy/pull/4520#issuecomment-1109302039
- Make it easier to spot issues with built-in shapes
## Solution
https://user-images.githubusercontent.com/200550/165624709-c40dfe7e-0e1e-4bd3-ae52-8ae66888c171.mp4
- Add an example showcasing the built-in 3d shapes with lighting/shadows
- Rotate objects in such a way that all faces are seen by the camera
- Add a UV debug texture
## Discussion
I'm not sure if this is what @alice-i-cecile had in mind, but I adapted the little "torus playground" from the issue linked above to include all built-in shapes.
This exact arrangement might not be particularly scalable if many more shapes are added. Maybe a slow camera pan, or cycling with the keyboard or on a timer, or a sidebar with buttons would work better. If one of the latter options is used, options for showing wireframes or computed flat normals might add some additional utility.
Ideally, I think we'd have a better way of visualizing normals.
Happy to rework this or close it if there's not a consensus around it being useful.
# Objective
- Part of the splitting process of #3692.
## Solution
- Remove / change the tuple structs inside of `gamepad.rs` of `bevy_input` to normal structs.
## Reasons
- It made the `gamepad_connection_system` cleaner.
- It made the `gamepad_input_events.rs` example cleaner (which is probably the most notable change for the user facing API).
- Tuple structs are not descriptive (`.0`, `.1`).
- Using tuple structs for more than 1 field is a bad idea (This means that the `Gamepad` type might be fine as a tuple struct, but I still prefer normal structs over tuple structs).
Feel free to discuss this change as this is more or less just a matter of taste.
## Changelog
### Changed
- The `Gamepad`, `GamepadButton`, `GamepadAxis`, `GamepadEvent` and `GamepadEventRaw` types are now normal structs instead of tuple structs and have a `new()` function.
## Migration Guide
- The `Gamepad`, `GamepadButton`, `GamepadAxis`, `GamepadEvent` and `GamepadEventRaw` types are now normal structs instead of tuple structs and have a `new()` function. To migrate change every instantiation to use the `new()` function instead and use the appropriate field names instead of `.0` and `.1`.
# Objective
- Clean up duplicate code in the add_before/add_after functions in PluginGroupBuilder.
## Solution
- moved index retrieval code to a private function index_of() for the PluginGroupBuilder.
- change is just tidying up. No real change to functionality.
# Objective
This code currently fails to compile with error ``the name `T` is already used for a generic parameter in this item's generic parameters``, because `T` is also used in code generated by `derive(Bundle)`.
```rust
#[derive(Bundle)]
struct MyBundle<T: Component> {
component: T,
}
```
## Solution
Add double underscores to type parameter names in `derive(Bundle)`.
