124 commits

Author	SHA1	Message	Date
Robert Swain	b6286cf570	Fix 2d_shapes and general 2D mesh instancing (#10051) ... # Objective - Fix #10050 ## Solution - Push constants needed to be defined in the pipeline layout and `bevy_sprite` needed to have a `webgl` feature.	2023-10-08 20:17:01 +00:00
Torstein Grindvik	8b21ee45c0	Allow Bevy to start from non-main threads on supported platforms (#10020) ... # Objective Allow Bevy apps to run without requiring to start from the main thread. This allows other projects and applications to do things like spawning a normal or scoped thread and run Bevy applications there. The current behaviour if you try this is a panic. ## Solution Allow this by default on platforms winit supports this behaviour on (x11, Wayland, Windows). --- ## Changelog ### Added - Added the ability to start Bevy apps outside of the main thread on x11, Wayland, Windows --------- Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no> Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com> Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com> Co-authored-by: James Liu <contact@jamessliu.com>	2023-10-06 13:26:06 +00:00
Pixelstorm	503b861e3a	Allow using async_io::block_on in bevy_tasks (#9626) ... # Objective Fixes #9625 ## Solution Adds `async-io` as an optional dependency of `bevy_tasks`. When enabled, this causes calls to `futures_lite::future::block_on` to be replaced with calls to `async_io::block_on`. --- ## Changelog - Added a new `async-io` feature to `bevy_tasks`. When enabled, this causes `bevy_tasks` to use `async-io`'s implemention of `block_on` instead of `futures-lite`'s implementation. You should enable this if you use `async-io` in your application.	2023-09-25 19:59:50 +00:00
Nurzhan Sakén	0607116699	"serialize" feature no longer enables the optional "bevy_scene" feature if it's not enabled from elsewhere (#9803) ... # Objective Fixes #9787 ## Solution ~~"serialize" feature enables "bevy_asset" now~~ "serialize" feature no longer enables the optional "bevy_scene" feature if it's not enabled from elsewhere (thanks to @mockersf)	2023-09-14 21:15:00 +00:00
Nicola Papale	5e00379431	Remove TypeRegistry re-export rename (#9807) ... # Objective The rename is confusing. Each time I import `TypeRegistry` I have to think at least 10 seconds about how to import it. And I've been working a lot with bevy reflect, which multiplies the papercut. In my crates, you can find lots of: ```rust use bevy::reflect::{TypeRegistryInternal as TypeRegistry}; ``` When I "go to definition" on `TypeRegistry` I get to `TypeRegistryArc`. And when I mean `TypeRegistry` in my function signature, 100% of the time I mean `TypeRegistry`, not the arc wrapper. Rust has borrowing, and most use-cases of the TypeRegistry accepts borrow of the registry, with no need to mutate it. `TypeRegistryInternal` is also confusing. In bevy crates, it doesn't exist. The bevy crate documentation often refers to `TypeRegistry` and link to `TypeRegistryInternal`. It only exists in the bevy re-exports. It makes it hard to understand which names qualifies which types. ## Solution Remove the rename, keep the type names as they are in `bevy_reflect` --- ## Changelog - Remove `TypeRegistry` and `TypeRegistryArc` renames from bevy `bevy_reflect` re-exports. ## Migration Guide - `TypeRegistry` as re-exported by the wrapper `bevy` crate is now `TypeRegistryArc` - `TypeRegistryInternal` as re-exported by the wrapper `bevy` crate is now `TypeRegistry`	2023-09-14 19:10:57 +00:00
Carter Anderson	5eb292dc10	Bevy Asset V2 (#8624) ... # Bevy Asset V2 Proposal ## Why Does Bevy Need A New Asset System? Asset pipelines are a central part of the gamedev process. Bevy's current asset system is missing a number of features that make it non-viable for many classes of gamedev. After plenty of discussions and [a long community feedback period](https://github.com/bevyengine/bevy/discussions/3972), we've identified a number missing features: * **Asset Preprocessing**: it should be possible to "preprocess" / "compile" / "crunch" assets at "development time" rather than when the game starts up. This enables offloading expensive work from deployed apps, faster asset loading, less runtime memory usage, etc. * **Per-Asset Loader Settings**: Individual assets cannot define their own loaders that override the defaults. Additionally, they cannot provide per-asset settings to their loaders. This is a huge limitation, as many asset types don't provide all information necessary for Bevy _inside_ the asset. For example, a raw PNG image says nothing about how it should be sampled (ex: linear vs nearest). * **Asset `.meta` files**: assets should have configuration files stored adjacent to the asset in question, which allows the user to configure asset-type-specific settings. These settings should be accessible during the pre-processing phase. Modifying a `.meta` file should trigger a re-processing / re-load of the asset. It should be possible to configure asset loaders from the meta file. * **Processed Asset Hot Reloading**: Changes to processed assets (or their dependencies) should result in re-processing them and re-loading the results in live Bevy Apps. * **Asset Dependency Tracking**: The current bevy_asset has no good way to wait for asset dependencies to load. It punts this as an exercise for consumers of the loader apis, which is unreasonable and error prone. There should be easy, ergonomic ways to wait for assets to load and block some logic on an asset's entire dependency tree loading. * **Runtime Asset Loading**: it should be (optionally) possible to load arbitrary assets dynamically at runtime. This necessitates being able to deploy and run the asset server alongside Bevy Apps on _all platforms_. For example, we should be able to invoke the shader compiler at runtime, stream scenes from sources like the internet, etc. To keep deployed binaries (and startup times) small, the runtime asset server configuration should be configurable with different settings compared to the "pre processor asset server". * **Multiple Backends**: It should be possible to load assets from arbitrary sources (filesystems, the internet, remote asset serves, etc). * **Asset Packing**: It should be possible to deploy assets in compressed "packs", which makes it easier and more efficient to distribute assets with Bevy Apps. * **Asset Handoff**: It should be possible to hold a "live" asset handle, which correlates to runtime data, without actually holding the asset in memory. Ex: it must be possible to hold a reference to a GPU mesh generated from a "mesh asset" without keeping the mesh data in CPU memory * **Per-Platform Processed Assets**: Different platforms and app distributions have different capabilities and requirements. Some platforms need lower asset resolutions or different asset formats to operate within the hardware constraints of the platform. It should be possible to define per-platform asset processing profiles. And it should be possible to deploy only the assets required for a given platform. These features have architectural implications that are significant enough to require a full rewrite. The current Bevy Asset implementation got us this far, but it can take us no farther. This PR defines a brand new asset system that implements most of these features, while laying the foundations for the remaining features to be built. ## Bevy Asset V2 Here is a quick overview of the features introduced in this PR. * **Asset Preprocessing**: Preprocess assets at development time into more efficient (and configurable) representations * **Dependency Aware**: Dependencies required to process an asset are tracked. If an asset's processed dependency changes, it will be reprocessed * **Hot Reprocessing/Reloading**: detect changes to asset source files, reprocess them if they have changed, and then hot-reload them in Bevy Apps. * **Only Process Changes**: Assets are only re-processed when their source file (or meta file) has changed. This uses hashing and timestamps to avoid processing assets that haven't changed. * **Transactional and Reliable**: Uses write-ahead logging (a technique commonly used by databases) to recover from crashes / forced-exits. Whenever possible it avoids full-reprocessing / only uncompleted transactions will be reprocessed. When the processor is running in parallel with a Bevy App, processor asset writes block Bevy App asset reads. Reading metadata + asset bytes is guaranteed to be transactional / correctly paired. * **Portable / Run anywhere / Database-free**: The processor does not rely on an in-memory database (although it uses some database techniques for reliability). This is important because pretty much all in-memory databases have unsupported platforms or build complications. * **Configure Processor Defaults Per File Type**: You can say "use this processor for all files of this type". * **Custom Processors**: The `Processor` trait is flexible and unopinionated. It can be implemented by downstream plugins. * **LoadAndSave Processors**: Most asset processing scenarios can be expressed as "run AssetLoader A, save the results using AssetSaver X, and then load the result using AssetLoader B". For example, load this png image using `PngImageLoader`, which produces an `Image` asset and then save it using `CompressedImageSaver` (which also produces an `Image` asset, but in a compressed format), which takes an `Image` asset as input. This means if you have an `AssetLoader` for an asset, you are already half way there! It also means that you can share AssetSavers across multiple loaders. Because `CompressedImageSaver` accepts Bevy's generic Image asset as input, it means you can also use it with some future `JpegImageLoader`. * **Loader and Saver Settings**: Asset Loaders and Savers can now define their own settings types, which are passed in as input when an asset is loaded / saved. Each asset can define its own settings. * **Asset `.meta` files**: configure asset loaders, their settings, enable/disable processing, and configure processor settings * **Runtime Asset Dependency Tracking** Runtime asset dependencies (ex: if an asset contains a `Handle<Image>`) are tracked by the asset server. An event is emitted when an asset and all of its dependencies have been loaded * **Unprocessed Asset Loading**: Assets do not require preprocessing. They can be loaded directly. A processed asset is just a "normal" asset with some extra metadata. Asset Loaders don't need to know or care about whether or not an asset was processed. * **Async Asset IO**: Asset readers/writers use async non-blocking interfaces. Note that because Rust doesn't yet support async traits, there is a bit of manual Boxing / Future boilerplate. This will hopefully be removed in the near future when Rust gets async traits. * **Pluggable Asset Readers and Writers**: Arbitrary asset source readers/writers are supported, both by the processor and the asset server. * **Better Asset Handles** * **Single Arc Tree**: Asset Handles now use a single arc tree that represents the lifetime of the asset. This makes their implementation simpler, more efficient, and allows us to cheaply attach metadata to handles. Ex: the AssetPath of a handle is now directly accessible on the handle itself! * **Const Typed Handles**: typed handles can be constructed in a const context. No more weird "const untyped converted to typed at runtime" patterns! * **Handles and Ids are Smaller / Faster To Hash / Compare**: Typed `Handle<T>` is now much smaller in memory and `AssetId<T>` is even smaller. * **Weak Handle Usage Reduction**: In general Handles are now considered to be "strong". Bevy features that previously used "weak `Handle<T>`" have been ported to `AssetId<T>`, which makes it statically clear that the features do not hold strong handles (while retaining strong type information). Currently Handle::Weak still exists, but it is very possible that we can remove that entirely. * **Efficient / Dense Asset Ids**: Assets now have efficient dense runtime asset ids, which means we can avoid expensive hash lookups. Assets are stored in Vecs instead of HashMaps. There are now typed and untyped ids, which means we no longer need to store dynamic type information in the ID for typed handles. "AssetPathId" (which was a nightmare from a performance and correctness standpoint) has been entirely removed in favor of dense ids (which are retrieved for a path on load) * **Direct Asset Loading, with Dependency Tracking**: Assets that are defined at runtime can still have their dependencies tracked by the Asset Server (ex: if you create a material at runtime, you can still wait for its textures to load). This is accomplished via the (currently optional) "asset dependency visitor" trait. This system can also be used to define a set of assets to load, then wait for those assets to load. * **Async folder loading**: Folder loading also uses this system and immediately returns a handle to the LoadedFolder asset, which means folder loading no longer blocks on directory traversals. * **Improved Loader Interface**: Loaders now have a specific "top level asset type", which makes returning the top-level asset simpler and statically typed. * **Basic Image Settings and Processing**: Image assets can now be processed into the gpu-friendly Basic Universal format. The ImageLoader now has a setting to define what format the image should be loaded as. Note that this is just a minimal MVP ... plenty of additional work to do here. To demo this, enable the `basis-universal` feature and turn on asset processing. * **Simpler Audio Play / AudioSink API**: Asset handle providers are cloneable, which means the Audio resource can mint its own handles. This means you can now do `let sink_handle = audio.play(music)` instead of `let sink_handle = audio_sinks.get_handle(audio.play(music))`. Note that this might still be replaced by https://github.com/bevyengine/bevy/pull/8424. **Removed Handle Casting From Engine Features**: Ex: FontAtlases no longer use casting between handle types ## Using The New Asset System ### Normal Unprocessed Asset Loading By default the `AssetPlugin` does not use processing. It behaves pretty much the same way as the old system. If you are defining a custom asset, first derive `Asset`: ```rust #[derive(Asset)] struct Thing { value: String, } ``` Initialize the asset: ```rust app.init_asset:<Thing>() ``` Implement a new `AssetLoader` for it: ```rust #[derive(Default)] struct ThingLoader; #[derive(Serialize, Deserialize, Default)] pub struct ThingSettings { some_setting: bool, } impl AssetLoader for ThingLoader { type Asset = Thing; type Settings = ThingSettings; fn load<'a>( &'a self, reader: &'a mut Reader, settings: &'a ThingSettings, load_context: &'a mut LoadContext, ) -> BoxedFuture<'a, Result<Thing, anyhow::Error>> { Box::pin(async move { let mut bytes = Vec::new(); reader.read_to_end(&mut bytes).await?; // convert bytes to value somehow Ok(Thing { value }) }) } fn extensions(&self) -> &[&str] { &["thing"] } } ``` Note that this interface will get much cleaner once Rust gets support for async traits. `Reader` is an async futures_io::AsyncRead. You can stream bytes as they come in or read them all into a `Vec<u8>`, depending on the context. You can use `let handle = load_context.load(path)` to kick off a dependency load, retrieve a handle, and register the dependency for the asset. Then just register the loader in your Bevy app: ```rust app.init_asset_loader::<ThingLoader>() ``` Now just add your `Thing` asset files into the `assets` folder and load them like this: ```rust fn system(asset_server: Res<AssetServer>) { let handle = Handle<Thing> = asset_server.load("cool.thing"); } ``` You can check load states directly via the asset server: ```rust if asset_server.load_state(&handle) == LoadState::Loaded { } ``` You can also listen for events: ```rust fn system(mut events: EventReader<AssetEvent<Thing>>, handle: Res<SomeThingHandle>) { for event in events.iter() { if event.is_loaded_with_dependencies(&handle) { } } } ``` Note the new `AssetEvent::LoadedWithDependencies`, which only fires when the asset is loaded _and_ all dependencies (and their dependencies) have loaded. Unlike the old asset system, for a given asset path all `Handle<T>` values point to the same underlying Arc. This means Handles can cheaply hold more asset information, such as the AssetPath: ```rust // prints the AssetPath of the handle info!("{:?}", handle.path()) ``` ### Processed Assets Asset processing can be enabled via the `AssetPlugin`. When developing Bevy Apps with processed assets, do this: ```rust app.add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev())) ``` This runs the `AssetProcessor` in the background with hot-reloading. It reads assets from the `assets` folder, processes them, and writes them to the `.imported_assets` folder. Asset loads in the Bevy App will wait for a processed version of the asset to become available. If an asset in the `assets` folder changes, it will be reprocessed and hot-reloaded in the Bevy App. When deploying processed Bevy apps, do this: ```rust app.add_plugins(DefaultPlugins.set(AssetPlugin::processed())) ``` This does not run the `AssetProcessor` in the background. It behaves like `AssetPlugin::unprocessed()`, but reads assets from `.imported_assets`. When the `AssetProcessor` is running, it will populate sibling `.meta` files for assets in the `assets` folder. Meta files for assets that do not have a processor configured look like this: ```rust ( meta_format_version: "1.0", asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: FromExtension, ), ), ) ``` This is metadata for an image asset. For example, if you have `assets/my_sprite.png`, this could be the metadata stored at `assets/my_sprite.png.meta`. Meta files are totally optional. If no metadata exists, the default settings will be used. In short, this file says "load this asset with the ImageLoader and use the file extension to determine the image type". This type of meta file is supported in all AssetPlugin modes. If in `Unprocessed` mode, the asset (with the meta settings) will be loaded directly. If in `ProcessedDev` mode, the asset file will be copied directly to the `.imported_assets` folder. The meta will also be copied directly to the `.imported_assets` folder, but with one addition: ```rust ( meta_format_version: "1.0", processed_info: Some(( hash: 12415480888597742505, full_hash: 14344495437905856884, process_dependencies: [], )), asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: FromExtension, ), ), ) ``` `processed_info` contains `hash` (a direct hash of the asset and meta bytes), `full_hash` (a hash of `hash` and the hashes of all `process_dependencies`), and `process_dependencies` (the `path` and `full_hash` of every process_dependency). A "process dependency" is an asset dependency that is _directly_ used when processing the asset. Images do not have process dependencies, so this is empty. When the processor is enabled, you can use the `Process` metadata config: ```rust ( meta_format_version: "1.0", asset: Process( processor: "bevy_asset::processor::process::LoadAndSave<bevy_render::texture::image_loader::ImageLoader, bevy_render::texture::compressed_image_saver::CompressedImageSaver>", settings: ( loader_settings: ( format: FromExtension, ), saver_settings: ( generate_mipmaps: true, ), ), ), ) ``` This configures the asset to use the `LoadAndSave` processor, which runs an AssetLoader and feeds the result into an AssetSaver (which saves the given Asset and defines a loader to load it with). (for terseness LoadAndSave will likely get a shorter/friendlier type name when [Stable Type Paths](#7184) lands). `LoadAndSave` is likely to be the most common processor type, but arbitrary processors are supported. `CompressedImageSaver` saves an `Image` in the Basis Universal format and configures the ImageLoader to load it as basis universal. The `AssetProcessor` will read this meta, run it through the LoadAndSave processor, and write the basis-universal version of the image to `.imported_assets`. The final metadata will look like this: ```rust ( meta_format_version: "1.0", processed_info: Some(( hash: 905599590923828066, full_hash: 9948823010183819117, process_dependencies: [], )), asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: Format(Basis), ), ), ) ``` To try basis-universal processing out in Bevy examples, (for example `sprite.rs`), change `add_plugins(DefaultPlugins)` to `add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev()))` and run with the `basis-universal` feature enabled: `cargo run --features=basis-universal --example sprite`. To create a custom processor, there are two main paths: 1. Use the `LoadAndSave` processor with an existing `AssetLoader`. Implement the `AssetSaver` trait, register the processor using `asset_processor.register_processor::<LoadAndSave<ImageLoader, CompressedImageSaver>>(image_saver.into())`. 2. Implement the `Process` trait directly and register it using: `asset_processor.register_processor(thing_processor)`. You can configure default processors for file extensions like this: ```rust asset_processor.set_default_processor::<ThingProcessor>("thing") ``` There is one more metadata type to be aware of: ```rust ( meta_format_version: "1.0", asset: Ignore, ) ``` This will ignore the asset during processing / prevent it from being written to `.imported_assets`. The AssetProcessor stores a transaction log at `.imported_assets/log` and uses it to gracefully recover from unexpected stops. This means you can force-quit the processor (and Bevy Apps running the processor in parallel) at arbitrary times! `.imported_assets` is "local state". It should _not_ be checked into source control. It should also be considered "read only". In practice, you _can_ modify processed assets and processed metadata if you really need to test something. But those modifications will not be represented in the hashes of the assets, so the processed state will be "out of sync" with the source assets. The processor _will not_ fix this for you. Either revert the change after you have tested it, or delete the processed files so they can be re-populated. ## Open Questions There are a number of open questions to be discussed. We should decide if they need to be addressed in this PR and if so, how we will address them: ### Implied Dependencies vs Dependency Enumeration There are currently two ways to populate asset dependencies: * **Implied via AssetLoaders**: if an AssetLoader loads an asset (and retrieves a handle), a dependency is added to the list. * **Explicit via the optional Asset::visit_dependencies**: if `server.load_asset(my_asset)` is called, it will call `my_asset.visit_dependencies`, which will grab dependencies that have been manually defined for the asset via the Asset trait impl (which can be derived). This means that defining explicit dependencies is optional for "loaded assets". And the list of dependencies is always accurate because loaders can only produce Handles if they register dependencies. If an asset was loaded with an AssetLoader, it only uses the implied dependencies. If an asset was created at runtime and added with `asset_server.load_asset(MyAsset)`, it will use `Asset::visit_dependencies`. However this can create a behavior mismatch between loaded assets and equivalent "created at runtime" assets if `Assets::visit_dependencies` doesn't exactly match the dependencies produced by the AssetLoader. This behavior mismatch can be resolved by completely removing "implied loader dependencies" and requiring `Asset::visit_dependencies` to supply dependency data. But this creates two problems: * It makes defining loaded assets harder and more error prone: Devs must remember to manually annotate asset dependencies with `#[dependency]` when deriving `Asset`. For more complicated assets (such as scenes), the derive likely wouldn't be sufficient and a manual `visit_dependencies` impl would be required. * Removes the ability to immediately kick off dependency loads: When AssetLoaders retrieve a Handle, they also immediately kick off an asset load for the handle, which means it can start loading in parallel _before_ the asset finishes loading. For large assets, this could be significant. (although this could be mitigated for processed assets if we store dependencies in the processed meta file and load them ahead of time) ### Eager ProcessorDev Asset Loading I made a controversial call in the interest of fast startup times ("time to first pixel") for the "processor dev mode configuration". When initializing the AssetProcessor, current processed versions of unchanged assets are yielded immediately, even if their dependencies haven't been checked yet for reprocessing. This means that non-current-state-of-filesystem-but-previously-valid assets might be returned to the App first, then hot-reloaded if/when their dependencies change and the asset is reprocessed. Is this behavior desirable? There is largely one alternative: do not yield an asset from the processor to the app until all of its dependencies have been checked for changes. In some common cases (load dependency has not changed since last run) this will increase startup time. The main question is "by how much" and is that slower startup time worth it in the interest of only yielding assets that are true to the current state of the filesystem. Should this be configurable? I'm starting to think we should only yield an asset after its (historical) dependencies have been checked for changes + processed as necessary, but I'm curious what you all think. ### Paths Are Currently The Only Canonical ID / Do We Want Asset UUIDs? In this implementation AssetPaths are the only canonical asset identifier (just like the previous Bevy Asset system and Godot). Moving assets will result in re-scans (and currently reprocessing, although reprocessing can easily be avoided with some changes). Asset renames/moves will break code and assets that rely on specific paths, unless those paths are fixed up. Do we want / need "stable asset uuids"? Introducing them is very possible: 1. Generate a UUID and include it in .meta files 2. Support UUID in AssetPath 3. Generate "asset indices" which are loaded on startup and map UUIDs to paths. 4 (maybe). Consider only supporting UUIDs for processed assets so we can generate quick-to-load indices instead of scanning meta files. The main "pro" is that assets referencing UUIDs don't need to be migrated when a path changes. The main "con" is that UUIDs cannot be "lazily resolved" like paths. They need a full view of all assets to answer the question "does this UUID exist". Which means UUIDs require the AssetProcessor to fully finish startup scans before saying an asset doesnt exist. And they essentially require asset pre-processing to use in apps, because scanning all asset metadata files at runtime to resolve a UUID is not viable for medium-to-large apps. It really requires a pre-generated UUID index, which must be loaded before querying for assets. I personally think this should be investigated in a separate PR. Paths aren't going anywhere ... _everyone_ uses filesystems (and filesystem-like apis) to manage their asset source files. I consider them permanent canonical asset information. Additionally, they behave well for both processed and unprocessed asset modes. Given that Bevy is supporting both, this feels like the right canonical ID to start with. UUIDS (and maybe even other indexed-identifier types) can be added later as necessary. ### Folder / File Naming Conventions All asset processing config currently lives in the `.imported_assets` folder. The processor transaction log is in `.imported_assets/log`. Processed assets are added to `.imported_assets/Default`, which will make migrating to processed asset profiles (ex: a `.imported_assets/Mobile` profile) a non-breaking change. It also allows us to create top-level files like `.imported_assets/log` without it being interpreted as an asset. Meta files currently have a `.meta` suffix. Do we like these names and conventions? ### Should the `AssetPlugin::processed_dev` configuration enable `watch_for_changes` automatically? Currently it does (which I think makes sense), but it does make it the only configuration that enables watch_for_changes by default. ### Discuss on_loaded High Level Interface: This PR includes a very rough "proof of concept" `on_loaded` system adapter that uses the `LoadedWithDependencies` event in combination with `asset_server.load_asset` dependency tracking to support this pattern ```rust fn main() { App::new() .init_asset::<MyAssets>() .add_systems(Update, on_loaded(create_array_texture)) .run(); } #[derive(Asset, Clone)] struct MyAssets { #[dependency] picture_of_my_cat: Handle<Image>, #[dependency] picture_of_my_other_cat: Handle<Image>, } impl FromWorld for ArrayTexture { fn from_world(world: &mut World) -> Self { picture_of_my_cat: server.load("meow.png"), picture_of_my_other_cat: server.load("meeeeeeeow.png"), } } fn spawn_cat(In(my_assets): In<MyAssets>, mut commands: Commands) { commands.spawn(SpriteBundle { texture: my_assets.picture_of_my_cat.clone(), ..default() }); commands.spawn(SpriteBundle { texture: my_assets.picture_of_my_other_cat.clone(), ..default() }); } ``` The implementation is _very_ rough. And it is currently unsafe because `bevy_ecs` doesn't expose some internals to do this safely from inside `bevy_asset`. There are plenty of unanswered questions like: * "do we add a Loadable" derive? (effectively automate the FromWorld implementation above) * Should `MyAssets` even be an Asset? (largely implemented this way because it elegantly builds on `server.load_asset(MyAsset { .. })` dependency tracking). We should think hard about what our ideal API looks like (and if this is a pattern we want to support). Not necessarily something we need to solve in this PR. The current `on_loaded` impl should probably be removed from this PR before merging. ## Clarifying Questions ### What about Assets as Entities? This Bevy Asset V2 proposal implementation initially stored Assets as ECS Entities. Instead of `AssetId<T>` + the `Assets<T>` resource it used `Entity` as the asset id and Asset values were just ECS components. There are plenty of compelling reasons to do this: 1. Easier to inline assets in Bevy Scenes (as they are "just" normal entities + components) 2. More flexible queries: use the power of the ECS to filter assets (ex: `Query<Mesh, With<Tree>>`). 3. Extensible. Users can add arbitrary component data to assets. 4. Things like "component visualization tools" work out of the box to visualize asset data. However Assets as Entities has a ton of caveats right now: * We need to be able to allocate entity ids without a direct World reference (aka rework id allocator in Entities ... i worked around this in my prototypes by just pre allocating big chunks of entities) * We want asset change events in addition to ECS change tracking ... how do we populate them when mutations can come from anywhere? Do we use Changed queries? This would require iterating over the change data for all assets every frame. Is this acceptable or should we implement a new "event based" component change detection option? * Reconciling manually created assets with asset-system managed assets has some nuance (ex: are they "loaded" / do they also have that component metadata?) * "how do we handle "static" / default entity handles" (ties in to the Entity Indices discussion: https://github.com/bevyengine/bevy/discussions/8319). This is necessary for things like "built in" assets and default handles in things like SpriteBundle. * Storing asset information as a component makes it easy to "invalidate" asset state by removing the component (or forcing modifications). Ideally we have ways to lock this down (some combination of Rust type privacy and ECS validation) In practice, how we store and identify assets is a reasonably superficial change (porting off of Assets as Entities and implementing dedicated storage + ids took less than a day). So once we sort out the remaining challenges the flip should be straightforward. Additionally, I do still have "Assets as Entities" in my commit history, so we can reuse that work. I personally think "assets as entities" is a good endgame, but it also doesn't provide _significant_ value at the moment and it certainly isn't ready yet with the current state of things. ### Why not Distill? [Distill](https://github.com/amethyst/distill) is a high quality fully featured asset system built in Rust. It is very natural to ask "why not just use Distill?". It is also worth calling out that for awhile, [we planned on adopting Distill / I signed off on it](https://github.com/bevyengine/bevy/issues/708). However I think Bevy has a number of constraints that make Distill adoption suboptimal: * **Architectural Simplicity:** * Distill's processor requires an in-memory database (lmdb) and RPC networked API (using Cap'n Proto). Each of these introduces API complexity that increases maintenance burden and "code grokability". Ignoring tests, documentation, and examples, Distill has 24,237 lines of Rust code (including generated code for RPC + database interactions). If you ignore generated code, it has 11,499 lines. * Bevy builds the AssetProcessor and AssetServer using pluggable AssetReader/AssetWriter Rust traits with simple io interfaces. They do not necessitate databases or RPC interfaces (although Readers/Writers could use them if that is desired). Bevy Asset V2 (at the time of writing this PR) is 5,384 lines of Rust code (ignoring tests, documentation, and examples). Grain of salt: Distill does have more features currently (ex: Asset Packing, GUIDS, remote-out-of-process asset processor). I do plan to implement these features in Bevy Asset V2 and I personally highly doubt they will meaningfully close the 6115 lines-of-code gap. * This complexity gap (which while illustrated by lines of code, is much bigger than just that) is noteworthy to me. Bevy should be hackable and there are pillars of Distill that are very hard to understand and extend. This is a matter of opinion (and Bevy Asset V2 also has complicated areas), but I think Bevy Asset V2 is much more approachable for the average developer. * Necessary disclaimer: counting lines of code is an extremely rough complexity metric. Read the code and form your own opinions. * **Optional Asset Processing:** Not all Bevy Apps (or Bevy App developers) need / want asset preprocessing. Processing increases the complexity of the development environment by introducing things like meta files, imported asset storage, running processors in the background, waiting for processing to finish, etc. Distill _requires_ preprocessing to work. With Bevy Asset V2 processing is fully opt-in. The AssetServer isn't directly aware of asset processors at all. AssetLoaders only care about converting bytes to runtime Assets ... they don't know or care if the bytes were pre-processed or not. Processing is "elegantly" (forgive my self-congratulatory phrasing) layered on top and builds on the existing Asset system primitives. * **Direct Filesystem Access to Processed Asset State:** Distill stores processed assets in a database. This makes debugging / inspecting the processed outputs harder (either requires special tooling to query the database or they need to be "deployed" to be inspected). Bevy Asset V2, on the other hand, stores processed assets in the filesystem (by default ... this is configurable). This makes interacting with the processed state more natural. Note that both Godot and Unity's new asset system store processed assets in the filesystem. * **Portability**: Because Distill's processor uses lmdb and RPC networking, it cannot be run on certain platforms (ex: lmdb is a non-rust dependency that cannot run on the web, some platforms don't support running network servers). Bevy should be able to process assets everywhere (ex: run the Bevy Editor on the web, compile + process shaders on mobile, etc). Distill does partially mitigate this problem by supporting "streaming" assets via the RPC protocol, but this is not a full solve from my perspective. And Bevy Asset V2 can (in theory) also stream assets (without requiring RPC, although this isn't implemented yet) Note that I _do_ still think Distill would be a solid asset system for Bevy. But I think the approach in this PR is a better solve for Bevy's specific "asset system requirements". ### Doesn't async-fs just shim requests to "sync" `std::fs`? What is the point? "True async file io" has limited / spotty platform support. async-fs (and the rust async ecosystem generally ... ex Tokio) currently use async wrappers over std::fs that offload blocking requests to separate threads. This may feel unsatisfying, but it _does_ still provide value because it prevents our task pools from blocking on file system operations (which would prevent progress when there are many tasks to do, but all threads in a pool are currently blocking on file system ops). Additionally, using async APIs for our AssetReaders and AssetWriters also provides value because we can later add support for "true async file io" for platforms that support it. _And_ we can implement other "true async io" asset backends (such as networked asset io). ## Draft TODO - [x] Fill in missing filesystem event APIs: file removed event (which is expressed as dangling RenameFrom events in some cases), file/folder renamed event - [x] Assets without loaders are not moved to the processed folder. This breaks things like referenced `.bin` files for GLTFs. This should be configurable per-non-asset-type. - [x] Initial implementation of Reflect and FromReflect for Handle. The "deserialization" parity bar is low here as this only worked with static UUIDs in the old impl ... this is a non-trivial problem. Either we add a Handle::AssetPath variant that gets "upgraded" to a strong handle on scene load or we use a separate AssetRef type for Bevy scenes (which is converted to a runtime Handle on load). This deserves its own discussion in a different pr. - [x] Populate read_asset_bytes hash when run by the processor (a bit of a special case .. when run by the processor the processed meta will contain the hash so we don't need to compute it on the spot, but we don't want/need to read the meta when run by the main AssetServer) - [x] Delay hot reloading: currently filesystem events are handled immediately, which creates timing issues in some cases. For example hot reloading images can sometimes break because the image isn't finished writing. We should add a delay, likely similar to the [implementation in this PR](https://github.com/bevyengine/bevy/pull/8503). - [x] Port old platform-specific AssetIo implementations to the new AssetReader interface (currently missing Android and web) - [x] Resolve on_loaded unsafety (either by removing the API entirely or removing the unsafe) - [x] Runtime loader setting overrides - [x] Remove remaining unwraps that should be error-handled. There are number of TODOs here - [x] Pretty AssetPath Display impl - [x] Document more APIs - [x] Resolve spurious "reloading because it has changed" events (to repro run load_gltf with `processed_dev()`) - [x] load_dependency hot reloading currently only works for processed assets. If processing is disabled, load_dependency changes are not hot reloaded. - [x] Replace AssetInfo dependency load/fail counters with `loading_dependencies: HashSet<UntypedAssetId>` to prevent reloads from (potentially) breaking counters. Storing this will also enable "dependency reloaded" events (see [Next Steps](#next-steps)) - [x] Re-add filesystem watcher cargo feature gate (currently it is not optional) - [ ] Migration Guide - [ ] Changelog ## Followup TODO - [ ] Replace "eager unchanged processed asset loading" behavior with "don't returned unchanged processed asset until dependencies have been checked". - [ ] Add true `Ignore` AssetAction that does not copy the asset to the imported_assets folder. - [ ] Finish "live asset unloading" (ex: free up CPU asset memory after uploading an image to the GPU), rethink RenderAssets, and port renderer features. The `Assets` collection uses `Option<T>` for asset storage to support its removal. (1) the Option might not actually be necessary ... might be able to just remove from the collection entirely (2) need to finalize removal apis - [ ] Try replacing the "channel based" asset id recycling with something a bit more efficient (ex: we might be able to use raw atomic ints with some cleverness) - [ ] Consider adding UUIDs to processed assets (scoped just to helping identify moved assets ... not exposed to load queries ... see [Next Steps](#next-steps)) - [ ] Store "last modified" source asset and meta timestamps in processed meta files to enable skipping expensive hashing when the file wasn't changed - [ ] Fix "slow loop" handle drop fix - [ ] Migrate to TypeName - [x] Handle "loader preregistration". See #9429 ## Next Steps * **Configurable per-type defaults for AssetMeta**: It should be possible to add configuration like "all png image meta should default to using nearest sampling" (currently this hard-coded per-loader/processor Settings::default() impls). Also see the "Folder Meta" bullet point. * **Avoid Reprocessing on Asset Renames / Moves**: See the "canonical asset ids" discussion in [Open Questions](#open-questions) and the relevant bullet point in [Draft TODO](#draft-todo). Even without canonical ids, folder renames could avoid reprocessing in some cases. * **Multiple Asset Sources**: Expand AssetPath to support "asset source names" and support multiple AssetReaders in the asset server (ex: `webserver://some_path/image.png` backed by an Http webserver AssetReader). The "default" asset reader would use normal `some_path/image.png` paths. Ideally this works in combination with multiple AssetWatchers for hot-reloading * **Stable Type Names**: this pr removes the TypeUuid requirement from assets in favor of `std::any::type_name`. This makes defining assets easier (no need to generate a new uuid / use weird proc macro syntax). It also makes reading meta files easier (because things have "friendly names"). We also use type names for components in scene files. If they are good enough for components, they are good enough for assets. And consistency across Bevy pillars is desirable. However, `std::any::type_name` is not guaranteed to be stable (although in practice it is). We've developed a [stable type path](https://github.com/bevyengine/bevy/pull/7184) to resolve this, which should be adopted when it is ready. * **Command Line Interface**: It should be possible to run the asset processor in a separate process from the command line. This will also require building a network-server-backed AssetReader to communicate between the app and the processor. We've been planning to build a "bevy cli" for awhile. This seems like a good excuse to build it. * **Asset Packing**: This is largely an additive feature, so it made sense to me to punt this until we've laid the foundations in this PR. * **Per-Platform Processed Assets**: It should be possible to generate assets for multiple platforms by supporting multiple "processor profiles" per asset (ex: compress with format X on PC and Y on iOS). I think there should probably be arbitrary "profiles" (which can be separate from actual platforms), which are then assigned to a given platform when generating the final asset distribution for that platform. Ex: maybe devs want a "Mobile" profile that is shared between iOS and Android. Or a "LowEnd" profile shared between web and mobile. * **Versioning and Migrations**: Assets, Loaders, Savers, and Processors need to have versions to determine if their schema is valid. If an asset / loader version is incompatible with the current version expected at runtime, the processor should be able to migrate them. I think we should try using Bevy Reflect for this, as it would allow us to load the old version as a dynamic Reflect type without actually having the old Rust type. It would also allow us to define "patches" to migrate between versions (Bevy Reflect devs are currently working on patching). The `.meta` file already has its own format version. Migrating that to new versions should also be possible. * **Real Copy-on-write AssetPaths**: Rust's actual Cow (clone-on-write type) currently used by AssetPath can still result in String clones that aren't actually necessary (cloning an Owned Cow clones the contents). Bevy's asset system requires cloning AssetPaths in a number of places, which result in actual clones of the internal Strings. This is not efficient. AssetPath internals should be reworked to exhibit truer cow-like-behavior that reduces String clones to the absolute minimum. * **Consider processor-less processing**: In theory the AssetServer could run processors "inline" even if the background AssetProcessor is disabled. If we decide this is actually desirable, we could add this. But I don't think its a priority in the short or medium term. * **Pre-emptive dependency loading**: We could encode dependencies in processed meta files, which could then be used by the Asset Server to kick of dependency loads as early as possible (prior to starting the actual asset load). Is this desirable? How much time would this save in practice? * **Optimize Processor With UntypedAssetIds**: The processor exclusively uses AssetPath to identify assets currently. It might be possible to swap these out for UntypedAssetIds in some places, which are smaller / cheaper to hash and compare. * **One to Many Asset Processing**: An asset source file that produces many assets currently must be processed into a single "processed" asset source. If labeled assets can be written separately they can each have their own configured savers _and_ they could be loaded more granularly. Definitely worth exploring! * **Automatically Track "Runtime-only" Asset Dependencies**: Right now, tracking "created at runtime" asset dependencies requires adding them via `asset_server.load_asset(StandardMaterial::default())`. I think with some cleverness we could also do this for `materials.add(StandardMaterial::default())`, making tracking work "everywhere". There are challenges here relating to change detection / ensuring the server is made aware of dependency changes. This could be expensive in some cases. * **"Dependency Changed" events**: Some assets have runtime artifacts that need to be re-generated when one of their dependencies change (ex: regenerate a material's bind group when a Texture needs to change). We are generating the dependency graph so we can definitely produce these events. Buuuuut generating these events will have a cost / they could be high frequency for some assets, so we might want this to be opt-in for specific cases. * **Investigate Storing More Information In Handles**: Handles can now store arbitrary information, which makes it cheaper and easier to access. How much should we move into them? Canonical asset load states (via atomics)? (`handle.is_loaded()` would be very cool). Should we store the entire asset and remove the `Assets<T>` collection? (`Arc<RwLock<Option<Image>>>`?) * **Support processing and loading files without extensions**: This is a pretty arbitrary restriction and could be supported with very minimal changes. * **Folder Meta**: It would be nice if we could define per folder processor configuration defaults (likely in a `.meta` or `.folder_meta` file). Things like "default to linear filtering for all Images in this folder". * **Replace async_broadcast with event-listener?** This might be approximately drop-in for some uses and it feels more light weight * **Support Running the AssetProcessor on the Web**: Most of the hard work is done here, but there are some easy straggling TODOs (make the transaction log an interface instead of a direct file writer so we can write a web storage backend, implement an AssetReader/AssetWriter that reads/writes to something like LocalStorage). * **Consider identifying and preventing circular dependencies**: This is especially important for "processor dependencies", as processing will silently never finish in these cases. * **Built-in/Inlined Asset Hot Reloading**: This PR regresses "built-in/inlined" asset hot reloading (previously provided by the DebugAssetServer). I'm intentionally punting this because I think it can be cleanly implemented with "multiple asset sources" by registering a "debug asset source" (ex: `debug://bevy_pbr/src/render/pbr.wgsl` asset paths) in combination with an AssetWatcher for that asset source and support for "manually loading pats with asset bytes instead of AssetReaders". The old DebugAssetServer was quite nasty and I'd love to avoid that hackery going forward. * **Investigate ways to remove double-parsing meta files**: Parsing meta files currently involves parsing once with "minimal" versions of the meta file to extract the type name of the loader/processor config, then parsing again to parse the "full" meta. This is suboptimal. We should be able to define custom deserializers that (1) assume the loader/processor type name comes first (2) dynamically looks up the loader/processor registrations to deserialize settings in-line (similar to components in the bevy scene format). Another alternative: deserialize as dynamic Reflect objects and then convert. * **More runtime loading configuration**: Support using the Handle type as a hint to select an asset loader (instead of relying on AssetPath extensions) * **More high level Processor trait implementations**: For example, it might be worth adding support for arbitrary chains of "asset transforms" that modify an in-memory asset representation between loading and saving. (ex: load a Mesh, run a `subdivide_mesh` transform, followed by a `flip_normals` transform, then save the mesh to an efficient compressed format). * **Bevy Scene Handle Deserialization**: (see the relevant [Draft TODO item](#draft-todo) for context) * **Explore High Level Load Interfaces**: See [this discussion](#discuss-on_loaded-high-level-interface) for one prototype. * **Asset Streaming**: It would be great if we could stream Assets (ex: stream a long video file piece by piece) * **ID Exchanging**: In this PR Asset Handles/AssetIds are bigger than they need to be because they have a Uuid enum variant. If we implement an "id exchanging" system that trades Uuids for "efficient runtime ids", we can cut down on the size of AssetIds, making them more efficient. This has some open design questions, such as how to spawn entities with "default" handle values (as these wouldn't have access to the exchange api in the current system). * **Asset Path Fixup Tooling**: Assets that inline asset paths inside them will break when an asset moves. The asset system provides the functionality to detect when paths break. We should build a framework that enables formats to define "path migrations". This is especially important for scene files. For editor-generated files, we should also consider using UUIDs (see other bullet point) to avoid the need to migrate in these cases. --------- Co-authored-by: BeastLe9enD <beastle9end@outlook.de> Co-authored-by: Mike <mike.hsu@gmail.com> Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>	2023-09-07 02:07:27 +00:00
Tristan Guichaoua	30d897a8bf	fix clippy::default_constructed_unit_structs and trybuild errors (#9144) ... # Objective With Rust `1.71.0` ([released a few minutes ago](https://github.com/rust-lang/rust/releases/tag/1.71.0)), clippy introduced a new lint ([`default_constructed_unit_structs`](https://rust-lang.github.io/rust-clippy/master/index.html#/default_constructed_unit_structs)) wich prevent calling `default()` on unit structs (e.g. `PhantomData::default()`). ## Solution Apply the lint suggestion. --------- Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2023-07-13 22:23:04 +00:00
Carter Anderson	7c3131a761	Bump Version after Release (#9106) ... CI-capable version of #9086 --------- Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: François <mockersf@gmail.com>	2023-07-10 21:19:27 +00:00
Carter Anderson	8ba9571eed	Release 0.11.0 (#9080) ... I created this manually as Github didn't want to run CI for the workflow-generated PR. I'm guessing we didn't hit this in previous releases because we used bors. Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>	2023-07-09 08:43:47 +00:00
James Liu	d33f5c759c	Add optional single-threaded feature to bevy_ecs/bevy_tasks (#6690) ... # Objective Fixes #6689. ## Solution Add `single-threaded` as an optional non-default feature to `bevy_ecs` and `bevy_tasks` that: - disable the `ParallelExecutor` as a default runner - disables the multi-threaded `TaskPool` - internally replace `QueryParIter::for_each` calls with `Query::for_each`. Removed the `Mutex` and `Arc` usage in the single-threaded task pool.  ## Future Work/TODO Create type aliases for `Mutex`, `Arc` that change to single-threaaded equivalents where possible. --- ## Changelog Added: Optional default feature `multi-theaded` to that enables multithreaded parallelism in the engine. Disabling it disables all multithreading in exchange for higher single threaded performance. Does nothing on WASM targets. --------- Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2023-07-09 04:22:15 +00:00
ira	001b3eb97c	Instanced line rendering for gizmos based on bevy_polyline (#8427) ... # Objective Adopt code from [bevy_polyline](https://github.com/ForesightMiningSoftwareCorporation/bevy_polyline) for gizmo line-rendering. This adds configurable width and perspective rendering for the lines. Many thanks to @mtsr for the initial work on bevy_polyline. Thanks to @aevyrie for maintaining it, @nicopap for adding the depth_bias feature and the other [contributors](https://github.com/ForesightMiningSoftwareCorporation/bevy_polyline/graphs/contributors) for squashing bugs and keeping bevy_polyline up-to-date. #### Before  #### After - with line perspective  Line perspective is not on by default because with perspective there is no default line width that works for every scene. <details><summary>After - without line perspective</summary> <p>  </p> </details> Somewhat unexpectedly, the performance is improved with this PR. At 200,000 lines in many_gizmos I get ~110 FPS on main and ~200 FPS with this PR. I'm guessing this is a CPU side difference as I would expect the rendering technique to be more expensive on the GPU to some extent, but I am not entirely sure. --------- Co-authored-by: Jonas Matser <github@jonasmatser.nl> Co-authored-by: Aevyrie <aevyrie@gmail.com> Co-authored-by: Nicola Papale <nico@nicopap.ch> Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>	2023-06-13 06:49:47 +00:00
Luca Della Vedova	a47f1ab4be	Add support for pnm textures (#8601) ... # Objective Add support for the [Netpbm](https://en.wikipedia.org/wiki/Netpbm) image formats, behind a `pnm` feature flag. My personal use case for this was robotics applications, with `pgm` being a popular format used in the field to represent world maps in robots. I chose the formats and feature name by checking the logic in [image.rs](a35ed552fa/crates/bevy_render/src/texture/image.rs (L76)) ## Solution Quite straightforward, the `pnm` feature flag already exists in the `image` crate so it's just creating and exposing a `pnm` feature flag in the root `Cargo.toml` and forwarding it through `bevy_internal` and `bevy_render` all the way to the `image` crate. --- ## Changelog ### Added `pnm` feature to add support for `pam`, `pbm`, `pgm` and `ppm` image formats. --------- Signed-off-by: Luca Della Vedova <lucadv@intrinsic.ai>	2023-05-16 23:51:47 +00:00
François	8070c29c21	Take example screenshots in CI (#8488) ... # Objective - I want to take screenshots of examples in CI to help with validation of changes ## Solution - Can override how much time is updated per frame - Can specify on which frame to take a screenshots - Save screenshots in CI I reused the `TimeUpdateStrategy::ManualDuration` to be able to set the time update strategy to a fixed duration every frame. Its previous meaning didn't make much sense to me. This change makes it possible to have screenshots that are exactly the same across runs. If this gets merged, I'll add visual comparison of screenshots between runs to ensure nothing gets broken ## Migration Guide * `TimeUpdateStrategy::ManualDuration` meaning has changed. Instead of setting time to `Instant::now()` plus the given duration, it sets time to last update plus the given duration.	2023-05-01 18:00:01 +00:00
François	949487d92c	make glsl and spirv support optional (#8491) ... # Objective - Reduce compilation time ## Solution - Make `spirv` and `glsl` shader format support optional. They are not needed for Bevy shaders. - on my mac (where shaders are compiled to `msl`), this reduces the total build time by 2 to 5 seconds, improvement should be even better with less cores There is a big reduction in compile time for `naga`, and small improvements on `wgpu` and `bevy_render` This PR with optional shader formats enabled timings: <img width="1478" alt="current main" src="https://user-images.githubusercontent.com/8672791/234347032-cbd5c276-a9b0-49c3-b793-481677391c18.png"> This PR: <img width="1479" alt="this pr" src="https://user-images.githubusercontent.com/8672791/234347059-a67412a9-da8d-4356-91d8-7b0ae84ca100.png"> --- ## Migration Guide - If you want to use shaders in `spirv`, enable the `shader_format_spirv` feature - If you want to use shaders in `glsl`, enable the `shader_format_glsl` feature	2023-04-25 19:30:48 +00:00
François	e0e5f3acd4	add a default font (#8445) ... # Objective - Have a default font ## Solution - Add a font based on FiraMono containing only ASCII characters and use it as the default font - It is behind a feature `default_font` enabled by default - I also updated examples to use it, but not UI examples to still show how to use a custom font --- ## Changelog * If you display text without using the default handle provided by `TextStyle`, the text will be displayed	2023-04-21 22:30:18 +00:00
François	882c86eee3	add a feature for memory tracing with tracy (#8272) ... # Objective - Expose a feature for tracing with Tracy to profile memory (https://docs.rs/tracy-client/0.15.2/tracy_client/struct.ProfiledAllocator.html) - This is a separate feature than just tracing as it can have an additional cost <img width="1912" alt="Screenshot 2023-03-30 at 08 39 49" src="https://user-images.githubusercontent.com/8672791/228985566-dd62fff8-1cbf-4f59-8a10-80c796daba0c.png">	2023-04-17 16:04:46 +00:00
JoJoJet	3ead10a3e0	Suppress the clippy::type_complexity lint (#8313) ... # Objective The clippy lint `type_complexity` is known not to play well with bevy. It frequently triggers when writing complex queries, and taking the lint's advice of using a type alias almost always just obfuscates the code with no benefit. Because of this, this lint is currently ignored in CI, but unfortunately it still shows up when viewing bevy code in an IDE. As someone who's made a fair amount of pull requests to this repo, I will say that this issue has been a consistent thorn in my side. Since bevy code is filled with spurious, ignorable warnings, it can be very difficult to spot the *real* warnings that must be fixed -- most of the time I just ignore all warnings, only to later find out that one of them was real after I'm done when CI runs. ## Solution Suppress this lint in all bevy crates. This was previously attempted in #7050, but the review process ended up making it more complicated than it needs to be and landed on a subpar solution. The discussion in https://github.com/rust-lang/rust-clippy/pull/10571 explores some better long-term solutions to this problem. Since there is no timeline on when these solutions may land, we should resolve this issue in the meantime by locally suppressing these lints. ### Unresolved issues Currently, these lints are not suppressed in our examples, since that would require suppressing the lint in every single source file. They are still ignored in CI.	2023-04-06 21:27:36 +00:00
Zhixing Zhang	2aaaed7f69	Make bevy_render an optional dependency of bevy_scene (#8136) ... # Objective bevy-scene does not have a reason to depend on bevy-render except to include the `Visibility` and `ComputedVisibility` components. Including that in the dependency chain is unnecessary for people not using `bevy_render`. Also fixed a problem where compilation fails when the `serialize` feature was not enabled. ## Solution This was added in #5335 to address some of the problems caused by #5310. Imo the user just always have to remember to include `VisibilityBundle` when they spawn `SceneBundle` or `DynamicSceneBundle`, but that will be a breaking change. This PR makes `bevy_render` an optional dependency of `bevy_scene` instead to respect the existing behavior.	2023-04-03 21:23:26 +00:00
ira	0893852c40	Document bevy_gizmos (#8186) ... # Objective Fix #8179 ## Solution - Added `#![warn(missing_docs)]` and document all public items. All methods on `Gizmos` have doc examples. - Expanded the docs on the module/crate. Some unfortunate duplication there :/ - Moved the methods from `GizmoBuffer` to be directly on `Gizmos` and made `GizmoBuffer` private. This means the methods on `Gizmos` will show up on its doc page. --------- Co-authored-by: James Liu <contact@jamessliu.com>	2023-03-28 20:58:02 +00:00
Ame	bb63ad7fab	Re-export glam_assert feature (#8232) ... # Objective - Allow the use of the "glam _assert" feature to help catch runtime errors and validate the arguments passed to glam. e.g. ```rs // Will panic if self is zero length when glam_assert is enabled. pub fn normalize(self) -> Self { let normalized = self.mul(self.length_recip()); glam_assert!(normalized.is_finite()); normalized } ``` ## Solution - Re-export the optional feature glam_assert --- ## Changelog Added: Optional feature "glam_assert"	2023-03-28 20:18:50 +00:00
KernelUwU	95aa387cd0	Added WebP image format support (#8220) ... # Objective WebP is a modern image format developed by Google that offers a significant reduction in file size compared to other image formats such as PNG and JPEG, while still maintaining good image quality. This makes it particularly useful for games with large numbers of images, such as those with high-quality textures or detailed sprites, where file size and loading times can have a significant impact on performance. By adding support for WebP images in Bevy, game developers using this engine can now take advantage of this modern image format and reduce the memory usage and loading times of their games. This improvement can ultimately result in a better gaming experience for players. In summary, the objective of adding WebP image format support in Bevy is to enable game developers to use a modern image format that provides better compression rates and smaller file sizes, resulting in faster loading times and reduced memory usage for their games. ## Solution To add support for WebP images in Bevy, this pull request leverages the existing `image` crate support for WebP. This implementation is easily integrated into the existing Bevy asset-loading system. To maintain compatibility with existing Bevy projects, WebP image support is disabled by default, and developers can enable it by adding a feature flag to their project's `Cargo.toml` file. With this feature, Bevy becomes even more versatile for game developers and provides a valuable addition to the game engine. --- ## Changelog - Added support for WebP image format in Bevy game engine ## Migration Guide To enable WebP image support in your Bevy project, add the following line to your project's Cargo.toml file: ```toml bevy = { version = "*", features = ["webp"]} ```	2023-03-28 19:53:55 +00:00
Valaphee The Meerkat	aef643cf50	Make bevy_winit/trace optional in trace feature (#8225) ... # Objective Bevy with ``` default-features = false features = [ "trace_tracy" ] ``` will fail due to `error: The platform you're compiling for is not supported by winit` ## Solution - Make bevy_winit/trace optional in trace feature	2023-03-26 23:03:38 +00:00
ira	6a85eb3d7e	Immediate Mode Line/Gizmo Drawing (#6529) ... # Objective Add a convenient immediate mode drawing API for visual debugging. Fixes #5619 Alternative to #1625 Partial alternative to #5734 Based off https://github.com/Toqozz/bevy_debug_lines with some changes: * Simultaneous support for 2D and 3D. * Methods for basic shapes; circles, spheres, rectangles, boxes, etc. * 2D methods. * Removed durations. Seemed niche, and can be handled by users. <details> <summary>Performance</summary> Stress tested using Bevy's recommended optimization settings for the dev profile with the following command. ```bash cargo run --example many_debug_lines \ --config "profile.dev.package.\"*\".opt-level=3" \ --config "profile.dev.opt-level=1" ``` I dipped to 65-70 FPS at 300,000 lines CPU: 3700x RAM Speed: 3200 Mhz GPU: 2070 super - probably not very relevant, mostly cpu/memory bound </details> <details> <summary>Fancy bloom screenshot</summary>  </details> ## Changelog * Added `GizmoPlugin` * Added `Gizmos` system parameter for drawing lines and wireshapes. ### TODO - [ ] Update changelog - [x] Update performance numbers - [x] Add credit to PR description ### Future work - Cache rendering primitives instead of constructing them out of line segments each frame. - Support for drawing solid meshes - Interactions. (See [bevy_mod_gizmos](https://github.com/LiamGallagher737/bevy_mod_gizmos)) - Fancier line drawing. (See [bevy_polyline](https://github.com/ForesightMiningSoftwareCorporation/bevy_polyline)) - Support for `RenderLayers` - Display gizmos for a certain duration. Currently everything displays for one frame (ie. immediate mode) - Changing settings per drawn item like drawing on top or drawing to different `RenderLayers` Co-Authored By: @lassade <felipe.jorge.pereira@gmail.com> Co-Authored By: @The5-1 <agaku@hotmail.de> Co-Authored By: @Toqozz <toqoz@hotmail.com> Co-Authored By: @nicopap <nico@nicopap.ch> --------- Co-authored-by: Robert Swain <robert.swain@gmail.com> Co-authored-by: IceSentry <c.giguere42@gmail.com> Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2023-03-20 20:57:54 +00:00
github-actions[bot]	6898351348	chore: Release (#7920) ... Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>	2023-03-06 05:13:36 +00:00
github-actions[bot]	b44af49200	Release 0.10.0 (#7919) ... Preparing next release This PR has been auto-generated	2023-03-06 03:53:02 +00:00
github-actions[bot]	8eb67932f1	Bump Version after Release (#7918) ... Bump version after release This PR has been auto-generated	2023-03-06 02:10:30 +00:00
Nolan Darilek	8d1f6ff7fa	Integrate AccessKit (#6874) ... # Objective UIs created for Bevy cannot currently be made accessible. This PR aims to address that. ## Solution Integrate AccessKit as a dependency, adding accessibility support to existing bevy_ui widgets. ## Changelog ### Added * Integrate with and expose [AccessKit](https://accesskit.dev) for platform accessibility. * Add `Label` for marking text specifically as a label for UI controls.	2023-03-01 22:45:04 +00:00
张林伟	acfd53a0fc	Remove redundant symphonia-mp3 feature (#7852) ... # Objective - Fixes https://github.com/bevyengine/bevy/issues/7848. ## Solution - remove the symphonia-mp3 feature and add a minimp3 feature instead.	2023-03-01 03:22:46 +00:00
François	1bd7306a3a	make bevy_text optional again (#7801) ... # Objective - `bevy_text` used to be "optional". the feature could be disabled, which meant that the systems were not added but `bevy_text` was still compiled because of a hard dependency in `bevy_ui` - Running something without `bevy_text` enabled and with `bevy_ui` enabled now crashes: ``` thread 'main' panicked at 'called `Option::unwrap()` on a `None` value', /bevy/crates/bevy_ecs/src/schedule/schedule.rs:1147:34 ``` - This is because `bevy_ui` declares some of its systems in ambiguity sets with systems from `bevy_text`, which were not added if `bevy_text` is disabled ## Solution - Make `bevy_text` completely optional ## Migration Guide - feature `bevy_text` now completely removes `bevy_text` from the dependencies when not enabled. Enable feature `bevy_text` if you use Bevy to render text	2023-02-24 02:21:07 +00:00
Griffin	912fb58869	Initial tonemapping options (#7594) ... # Objective Splits tone mapping from https://github.com/bevyengine/bevy/pull/6677 into a separate PR. Address https://github.com/bevyengine/bevy/issues/2264. Adds tone mapping options: - None: Bypasses tonemapping for instances where users want colors output to match those set. - Reinhard - Reinhard Luminance: Bevy's exiting tonemapping - [ACES](https://github.com/TheRealMJP/BakingLab/blob/master/BakingLab/ACES.hlsl) (Fitted version, based on the same implementation that Godot 4 uses) see https://github.com/bevyengine/bevy/issues/2264 - [AgX](https://github.com/sobotka/AgX) - SomewhatBoringDisplayTransform - TonyMcMapface - Blender Filmic This PR also adds support for EXR images so they can be used to compare tonemapping options with reference images. ## Migration Guide - Tonemapping is now an enum with NONE and the various tonemappers. - The DebandDither is now a separate component. Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>	2023-02-19 20:38:13 +00:00
Trent	0af001edd4	Update DefaultPlugins docs (#7742) ... # Objective - Updates list of plugins and feature information in `DefaultPlugins` doc comment - Solve the short term issue of https://github.com/bevyengine/bevy/issues/7332 ## Solution - Update doc comment to reflect current implementation - Sort plugins by appearance in implementation	2023-02-19 15:04:12 +00:00
Daniel Chia	40bbbbb34e	Introduce detailed_trace macro, use in TrackedRenderPass (#7639) ... Profiles show that in extremely hot loops, like the draw loops in the renderer, invoking the trace! macro has noticeable overhead, even if the trace log level is not enabled. Solve this by introduce a 'wrapper' detailed_trace macro around trace, that wraps the trace! log statement in a trivially false if statement unless a cargo feature is enabled # Objective - Eliminate significant overhead observed with trace-level logging in render hot loops, even when trace log level is not enabled. - This is an alternative solution to the one proposed in #7223 ## Solution - Introduce a wrapper around the `trace!` macro called `detailed_trace!`. This macro wraps the `trace!` macro with an if statement that is conditional on a new cargo feature, `detailed_trace`. When the feature is not enabled (the default), then the if statement is trivially false and should be optimized away at compile time. - Convert the observed hot occurrences of trace logging in `TrackedRenderPass` with this new macro. Testing the results of ``` cargo run --profile stress-test --features bevy/trace_tracy --example many_cubes -- spheres ```  shows significant improvement of the `main_opaque_pass_3d` of the renderer, a median time decrease from 6.0ms to 3.5ms. --- ## Changelog - For performance reasons, some detailed renderer trace logs now require the use of cargo feature `detailed_trace` in addition to setting the log level to `TRACE` in order to be shown. ## Migration Guide - Some detailed bevy trace events now require the use of the cargo feature `detailed_trace` in addition to enabling `TRACE` level logging to view. Should you wish to see these logs, please compile your code with the bevy feature `detailed_trace`. Currently, the only logs that are affected are the renderer logs pertaining to `TrackedRenderPass` functions	2023-02-13 18:20:27 +00:00
François	7e0a9bfade	IOS, Android... same thing (#7493) ... # Objective - Merge the examples on iOS and Android - Make sure they both work from the same code ## Solution - don't create window when not in an active state (from #6830) - exit on suspend on Android (from #6830) - automatically enable dependency feature of bevy_audio on android so that it works out of the box - don't inverse y position of touch events - reuse the same example for both Android and iOS Fixes #4616 Fixes #4103 Fixes #3648 Fixes #3458 Fixes #3249 Fixes #86	2023-02-06 18:08:49 +00:00
François	3900b48c88	update winit to 0.28 (#7480) ... # Objective - Update winit to 0.28 ## Solution - Small API change - A security advisory has been added for a unmaintained crate used by a dependency of winit build script for wayland I didn't do anything for Android support in this PR though it should be fixable, it should be done in a separate one, maybe https://github.com/bevyengine/bevy/pull/6830 --- ## Changelog - `window.always_on_top` has been removed, you can now use `window.window_level` ## Migration Guide before: ```rust app.new() .add_plugins(DefaultPlugins.set(WindowPlugin { primary_window: Some(Window { always_on_top: true, ..default() }), ..default() })); ``` after: ```rust app.new() .add_plugins(DefaultPlugins.set(WindowPlugin { primary_window: Some(Window { window_level: bevy:🪟:WindowLevel::AlwaysOnTop, ..default() }), ..default() })); ```	2023-02-03 16:41:39 +00:00
Stephen Martindale	6e44d8a251	Docs: DefaultPlugins vs. MinimalPlugins and ScheduleRunnerPlugin (#7226) ... # Objective The naming of the two plugin groups `DefaultPlugins` and `MinimalPlugins` suggests that one is a super-set of the other but this is not the case. Instead, the two plugin groups are intended for very different purposes. Closes: https://github.com/bevyengine/bevy/issues/7173 ## Solution This merge request adds doc. comments that compensate for this and try save the user from confusion. 1. `DefaultPlugins` and `MinimalPlugins` intentions are described. 2. A strong emphasis on embracing `DefaultPlugins` as a whole but controlling what it contains with *Cargo* *features* is added – this is because the ordering in `DefaultPlugins` appears to be important so preventing users with "minimalist" foibles (That's Me!) from recreating the code seems worthwhile. 3. Notes are added explaining the confusing fact that `MinimalPlugins` contains `ScheduleRunnerPlugin` (which is very "important"-sounding) but `DefaultPlugins` does not.	2023-01-24 05:25:03 +00:00
张林伟	02978053cd	Rename dynamic feature (#7340) ... # Objective - Fixes https://github.com/bevyengine/bevy/issues/7334 ## Solution - Rename `dynamic` feature to `dynamic_linking`. --- ## Migration Guide - `dynamic` feature was renamed to `dynamic_linking`	2023-01-23 14:28:00 +00:00
ira	38691ee95c	Fix dynamic linking (on linux) (#7333) ... # Problemo Some code in #5911 and #5454 does not compile with dynamic linking enabled. The code is behind a feature gate to prevent dynamically linked builds from breaking, but it's not quite set up correctly. ## Solution Forward the `dynamic` feature flag to the `bevy_diagnostic` crate and gate the code behind it. Co-authored-by: devil-ira <justthecooldude@gmail.com>	2023-01-22 20:41:28 +00:00
Mike	2027af4c54	Pipelined Rendering (#6503) ... # Objective - Implement pipelined rendering - Fixes #5082 - Fixes #4718 ## User Facing Description Bevy now implements piplelined rendering! Pipelined rendering allows the app logic and rendering logic to run on different threads leading to large gains in performance.  *tracy capture of many_foxes example* To use pipelined rendering, you just need to add the `PipelinedRenderingPlugin`. If you're using `DefaultPlugins` then it will automatically be added for you on all platforms except wasm. Bevy does not currently support multithreading on wasm which is needed for this feature to work. If you aren't using `DefaultPlugins` you can add the plugin manually. ```rust use bevy::prelude::*; use bevy::render::pipelined_rendering::PipelinedRenderingPlugin; fn main() { App::new() // whatever other plugins you need .add_plugin(RenderPlugin) // needs to be added after RenderPlugin .add_plugin(PipelinedRenderingPlugin) .run(); } ``` If for some reason pipelined rendering needs to be removed. You can also disable the plugin the normal way. ```rust use bevy::prelude::*; use bevy::render::pipelined_rendering::PipelinedRenderingPlugin; fn main() { App::new.add_plugins(DefaultPlugins.build().disable::<PipelinedRenderingPlugin>()); } ``` ### A setup function was added to plugins A optional plugin lifecycle function was added to the `Plugin trait`. This function is called after all plugins have been built, but before the app runner is called. This allows for some final setup to be done. In the case of pipelined rendering, the function removes the sub app from the main app and sends it to the render thread. ```rust struct MyPlugin; impl Plugin for MyPlugin { fn build(&self, app: &mut App) { } // optional function fn setup(&self, app: &mut App) { // do some final setup before runner is called } } ``` ### A Stage for Frame Pacing In the `RenderExtractApp` there is a stage labelled `BeforeIoAfterRenderStart` that systems can be added to. The specific use case for this stage is for a frame pacing system that can delay the start of main app processing in render bound apps to reduce input latency i.e. "frame pacing". This is not currently built into bevy, but exists as `bevy` ```text |-------------------------------------------------------------------| | | BeforeIoAfterRenderStart | winit events | main schedule | | extract |---------------------------------------------------------| | | extract commands | rendering schedule | |-------------------------------------------------------------------| ``` ### Small API additions * `Schedule::remove_stage` * `App::insert_sub_app` * `App::remove_sub_app` * `TaskPool::scope_with_executor` ## Problems and Solutions ### Moving render app to another thread Most of the hard bits for this were done with the render redo. This PR just sends the render app back and forth through channels which seems to work ok. I originally experimented with using a scope to run the render task. It was cuter, but that approach didn't allow render to start before i/o processing. So I switched to using channels. There is much complexity in the coordination that needs to be done, but it's worth it. By moving rendering during i/o processing the frame times should be much more consistent in render bound apps. See https://github.com/bevyengine/bevy/issues/4691. ### Unsoundness with Sending World with NonSend resources Dropping !Send things on threads other than the thread they were spawned on is considered unsound. The render world doesn't have any nonsend resources. So if we tell the users to "pretty please don't spawn nonsend resource on the render world", we can avoid this problem. More seriously there is this https://github.com/bevyengine/bevy/pull/6534 pr, which patches the unsoundness by aborting the app if a nonsend resource is dropped on the wrong thread. ~~That PR should probably be merged before this one.~~ For a longer term solution we have this discussion going https://github.com/bevyengine/bevy/discussions/6552. ### NonSend Systems in render world The render world doesn't have any !Send resources, but it does have a non send system. While Window is Send, winit does have some API's that can only be accessed on the main thread. `prepare_windows` in the render schedule thus needs to be scheduled on the main thread. Currently we run nonsend systems by running them on the thread the TaskPool::scope runs on. When we move render to another thread this no longer works. To fix this, a new `scope_with_executor` method was added that takes a optional `TheadExecutor` that can only be ticked on the thread it was initialized on. The render world then holds a `MainThreadExecutor` resource which can be passed to the scope in the parallel executor that it uses to spawn it's non send systems on. ### Scopes executors between render and main should not share tasks Since the render world and the app world share the `ComputeTaskPool`. Because `scope` has executors for the ComputeTaskPool a system from the main world could run on the render thread or a render system could run on the main thread. This can cause performance problems because it can delay a stage from finishing. See https://github.com/bevyengine/bevy/pull/6503#issuecomment-1309791442 for more details. To avoid this problem, `TaskPool::scope` has been changed to not tick the ComputeTaskPool when it's used by the parallel executor. In the future when we move closer to the 1 thread to 1 logical core model we may want to overprovide threads, because the render and main app threads don't do much when executing the schedule. ## Performance My machine is Windows 11, AMD Ryzen 5600x, RX 6600 ### Examples #### This PR with pipelining vs Main > Note that these were run on an older version of main and the performance profile has probably changed due to optimizations Seeing a perf gain from 29% on many lights to 7% on many sprites. <html> <body> <!--StartFragment--><google-sheets-html-origin>   | percent |   |   | Diff |   |   | Main |   |   | PR |   |   -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- tracy frame time | mean | median | sigma | mean | median | sigma | mean | median | sigma | mean | median | sigma many foxes | 27.01% | 27.34% | -47.09% | 1.58 | 1.55 | -1.78 | 5.85 | 5.67 | 3.78 | 4.27 | 4.12 | 5.56 many lights | 29.35% | 29.94% | -10.84% | 3.02 | 3.03 | -0.57 | 10.29 | 10.12 | 5.26 | 7.27 | 7.09 | 5.83 many animated sprites | 13.97% | 15.69% | 14.20% | 3.79 | 4.17 | 1.41 | 27.12 | 26.57 | 9.93 | 23.33 | 22.4 | 8.52 3d scene | 25.79% | 26.78% | 7.46% | 0.49 | 0.49 | 0.15 | 1.9 | 1.83 | 2.01 | 1.41 | 1.34 | 1.86 many cubes | 11.97% | 11.28% | 14.51% | 1.93 | 1.78 | 1.31 | 16.13 | 15.78 | 9.03 | 14.2 | 14 | 7.72 many sprites | 7.14% | 9.42% | -85.42% | 1.72 | 2.23 | -6.15 | 24.09 | 23.68 | 7.2 | 22.37 | 21.45 | 13.35 <!--EndFragment--> </body> </html> #### This PR with pipelining disabled vs Main Mostly regressions here. I don't think this should be a problem as users that are disabling pipelined rendering are probably running single threaded and not using the parallel executor. The regression is probably mostly due to the switch to use `async_executor::run` instead of `try_tick` and also having one less thread to run systems on. I'll do a writeup on why switching to `run` causes regressions, so we can try to eventually fix it. Using try_tick causes issues when pipeline rendering is enable as seen [here](https://github.com/bevyengine/bevy/pull/6503#issuecomment-1380803518) <html> <body> <!--StartFragment--><google-sheets-html-origin>   | percent |   |   | Diff |   |   | Main |   |   | PR no pipelining |   |   -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- tracy frame time | mean | median | sigma | mean | median | sigma | mean | median | sigma | mean | median | sigma many foxes | -3.72% | -4.42% | -1.07% | -0.21 | -0.24 | -0.04 | 5.64 | 5.43 | 3.74 | 5.85 | 5.67 | 3.78 many lights | 0.29% | -0.30% | 4.75% | 0.03 | -0.03 | 0.25 | 10.29 | 10.12 | 5.26 | 10.26 | 10.15 | 5.01 many animated sprites | 0.22% | 1.81% | -2.72% | 0.06 | 0.48 | -0.27 | 27.12 | 26.57 | 9.93 | 27.06 | 26.09 | 10.2 3d scene | -15.79% | -14.75% | -31.34% | -0.3 | -0.27 | -0.63 | 1.9 | 1.83 | 2.01 | 2.2 | 2.1 | 2.64 many cubes | -2.85% | -3.30% | 0.00% | -0.46 | -0.52 | 0 | 16.13 | 15.78 | 9.03 | 16.59 | 16.3 | 9.03 many sprites | 2.49% | 2.41% | 0.69% | 0.6 | 0.57 | 0.05 | 24.09 | 23.68 | 7.2 | 23.49 | 23.11 | 7.15 <!--EndFragment--> </body> </html> ### Benchmarks Mostly the same except empty_systems has got a touch slower. The maybe_pipelining+1 column has the compute task pool with an extra thread over default added. This is because pipelining loses one thread over main to execute systems on, since the main thread no longer runs normal systems. <details> <summary>Click Me</summary> ```text group main maybe-pipelining+1 ----- ------------------------- ------------------ busy_systems/01x_entities_03_systems 1.07 30.7±1.32µs ? ?/sec 1.00 28.6±1.35µs ? ?/sec busy_systems/01x_entities_06_systems 1.10 52.1±1.10µs ? ?/sec 1.00 47.2±1.08µs ? ?/sec busy_systems/01x_entities_09_systems 1.00 74.6±1.36µs ? ?/sec 1.00 75.0±1.93µs ? ?/sec busy_systems/01x_entities_12_systems 1.03 100.6±6.68µs ? ?/sec 1.00 98.0±1.46µs ? ?/sec busy_systems/01x_entities_15_systems 1.11 128.5±3.53µs ? ?/sec 1.00 115.5±1.02µs ? ?/sec busy_systems/02x_entities_03_systems 1.16 50.4±2.56µs ? ?/sec 1.00 43.5±3.00µs ? ?/sec busy_systems/02x_entities_06_systems 1.00 87.1±1.27µs ? ?/sec 1.05 91.5±7.15µs ? ?/sec busy_systems/02x_entities_09_systems 1.04 139.9±6.37µs ? ?/sec 1.00 134.0±1.06µs ? ?/sec busy_systems/02x_entities_12_systems 1.05 179.2±3.47µs ? ?/sec 1.00 170.1±3.17µs ? ?/sec busy_systems/02x_entities_15_systems 1.01 219.6±3.75µs ? ?/sec 1.00 218.1±2.55µs ? ?/sec busy_systems/03x_entities_03_systems 1.10 70.6±2.33µs ? ?/sec 1.00 64.3±0.69µs ? ?/sec busy_systems/03x_entities_06_systems 1.02 130.2±3.11µs ? ?/sec 1.00 128.0±1.34µs ? ?/sec busy_systems/03x_entities_09_systems 1.00 195.0±10.11µs ? ?/sec 1.00 194.8±1.41µs ? ?/sec busy_systems/03x_entities_12_systems 1.01 261.7±4.05µs ? ?/sec 1.00 259.8±4.11µs ? ?/sec busy_systems/03x_entities_15_systems 1.00 318.0±3.04µs ? ?/sec 1.06 338.3±20.25µs ? ?/sec busy_systems/04x_entities_03_systems 1.00 82.9±0.63µs ? ?/sec 1.02 84.3±0.63µs ? ?/sec busy_systems/04x_entities_06_systems 1.01 181.7±3.65µs ? ?/sec 1.00 179.8±1.76µs ? ?/sec busy_systems/04x_entities_09_systems 1.04 265.0±4.68µs ? ?/sec 1.00 255.3±1.98µs ? ?/sec busy_systems/04x_entities_12_systems 1.00 335.9±3.00µs ? ?/sec 1.05 352.6±15.84µs ? ?/sec busy_systems/04x_entities_15_systems 1.00 418.6±10.26µs ? ?/sec 1.08 450.2±39.58µs ? ?/sec busy_systems/05x_entities_03_systems 1.07 114.3±0.95µs ? ?/sec 1.00 106.9±1.52µs ? ?/sec busy_systems/05x_entities_06_systems 1.08 229.8±2.90µs ? ?/sec 1.00 212.3±4.18µs ? ?/sec busy_systems/05x_entities_09_systems 1.03 329.3±1.99µs ? ?/sec 1.00 319.2±2.43µs ? ?/sec busy_systems/05x_entities_12_systems 1.06 454.7±6.77µs ? ?/sec 1.00 430.1±3.58µs ? ?/sec busy_systems/05x_entities_15_systems 1.03 554.6±6.15µs ? ?/sec 1.00 538.4±23.87µs ? ?/sec contrived/01x_entities_03_systems 1.00 14.0±0.15µs ? ?/sec 1.08 15.1±0.21µs ? ?/sec contrived/01x_entities_06_systems 1.04 28.5±0.37µs ? ?/sec 1.00 27.4±0.44µs ? ?/sec contrived/01x_entities_09_systems 1.00 41.5±4.38µs ? ?/sec 1.02 42.2±2.24µs ? ?/sec contrived/01x_entities_12_systems 1.06 55.9±1.49µs ? ?/sec 1.00 52.6±1.36µs ? ?/sec contrived/01x_entities_15_systems 1.02 68.0±2.00µs ? ?/sec 1.00 66.5±0.78µs ? ?/sec contrived/02x_entities_03_systems 1.03 25.2±0.38µs ? ?/sec 1.00 24.6±0.52µs ? ?/sec contrived/02x_entities_06_systems 1.00 46.3±0.49µs ? ?/sec 1.04 48.1±4.13µs ? ?/sec contrived/02x_entities_09_systems 1.02 70.4±0.99µs ? ?/sec 1.00 68.8±1.04µs ? ?/sec contrived/02x_entities_12_systems 1.06 96.8±1.49µs ? ?/sec 1.00 91.5±0.93µs ? ?/sec contrived/02x_entities_15_systems 1.02 116.2±0.95µs ? ?/sec 1.00 114.2±1.42µs ? ?/sec contrived/03x_entities_03_systems 1.00 33.2±0.38µs ? ?/sec 1.01 33.6±0.45µs ? ?/sec contrived/03x_entities_06_systems 1.00 62.4±0.73µs ? ?/sec 1.01 63.3±1.05µs ? ?/sec contrived/03x_entities_09_systems 1.02 96.4±0.85µs ? ?/sec 1.00 94.8±3.02µs ? ?/sec contrived/03x_entities_12_systems 1.01 126.3±4.67µs ? ?/sec 1.00 125.6±2.27µs ? ?/sec contrived/03x_entities_15_systems 1.03 160.2±9.37µs ? ?/sec 1.00 156.0±1.53µs ? ?/sec contrived/04x_entities_03_systems 1.02 41.4±3.39µs ? ?/sec 1.00 40.5±0.52µs ? ?/sec contrived/04x_entities_06_systems 1.00 78.9±1.61µs ? ?/sec 1.02 80.3±1.06µs ? ?/sec contrived/04x_entities_09_systems 1.02 121.8±3.97µs ? ?/sec 1.00 119.2±1.46µs ? ?/sec contrived/04x_entities_12_systems 1.00 157.8±1.48µs ? ?/sec 1.01 160.1±1.72µs ? ?/sec contrived/04x_entities_15_systems 1.00 197.9±1.47µs ? ?/sec 1.08 214.2±34.61µs ? ?/sec contrived/05x_entities_03_systems 1.00 49.1±0.33µs ? ?/sec 1.01 49.7±0.75µs ? ?/sec contrived/05x_entities_06_systems 1.00 95.0±0.93µs ? ?/sec 1.00 94.6±0.94µs ? ?/sec contrived/05x_entities_09_systems 1.01 143.2±1.68µs ? ?/sec 1.00 142.2±2.00µs ? ?/sec contrived/05x_entities_12_systems 1.00 191.8±2.03µs ? ?/sec 1.01 192.7±7.88µs ? ?/sec contrived/05x_entities_15_systems 1.02 239.7±3.71µs ? ?/sec 1.00 235.8±4.11µs ? ?/sec empty_systems/000_systems 1.01 47.8±0.67ns ? ?/sec 1.00 47.5±2.02ns ? ?/sec empty_systems/001_systems 1.00 1743.2±126.14ns ? ?/sec 1.01 1761.1±70.10ns ? ?/sec empty_systems/002_systems 1.01 2.2±0.04µs ? ?/sec 1.00 2.2±0.02µs ? ?/sec empty_systems/003_systems 1.02 2.7±0.09µs ? ?/sec 1.00 2.7±0.16µs ? ?/sec empty_systems/004_systems 1.00 3.1±0.11µs ? ?/sec 1.00 3.1±0.24µs ? ?/sec empty_systems/005_systems 1.00 3.5±0.05µs ? ?/sec 1.11 3.9±0.70µs ? ?/sec empty_systems/010_systems 1.00 5.5±0.12µs ? ?/sec 1.03 5.7±0.17µs ? ?/sec empty_systems/015_systems 1.00 7.9±0.19µs ? ?/sec 1.06 8.4±0.16µs ? ?/sec empty_systems/020_systems 1.00 10.4±1.25µs ? ?/sec 1.02 10.6±0.18µs ? ?/sec empty_systems/025_systems 1.00 12.4±0.39µs ? ?/sec 1.14 14.1±1.07µs ? ?/sec empty_systems/030_systems 1.00 15.1±0.39µs ? ?/sec 1.05 15.8±0.62µs ? ?/sec empty_systems/035_systems 1.00 16.9±0.47µs ? ?/sec 1.07 18.0±0.37µs ? ?/sec empty_systems/040_systems 1.00 19.3±0.41µs ? ?/sec 1.05 20.3±0.39µs ? ?/sec empty_systems/045_systems 1.00 22.4±1.67µs ? ?/sec 1.02 22.9±0.51µs ? ?/sec empty_systems/050_systems 1.00 24.4±1.67µs ? ?/sec 1.01 24.7±0.40µs ? ?/sec empty_systems/055_systems 1.05 28.6±5.27µs ? ?/sec 1.00 27.2±0.70µs ? ?/sec empty_systems/060_systems 1.02 29.9±1.64µs ? ?/sec 1.00 29.3±0.66µs ? ?/sec empty_systems/065_systems 1.02 32.7±3.15µs ? ?/sec 1.00 32.1±0.98µs ? ?/sec empty_systems/070_systems 1.00 33.0±1.42µs ? ?/sec 1.03 34.1±1.44µs ? ?/sec empty_systems/075_systems 1.00 34.8±0.89µs ? ?/sec 1.04 36.2±0.70µs ? ?/sec empty_systems/080_systems 1.00 37.0±1.82µs ? ?/sec 1.05 38.7±1.37µs ? ?/sec empty_systems/085_systems 1.00 38.7±0.76µs ? ?/sec 1.05 40.8±0.83µs ? ?/sec empty_systems/090_systems 1.00 41.5±1.09µs ? ?/sec 1.04 43.2±0.82µs ? ?/sec empty_systems/095_systems 1.00 43.6±1.10µs ? ?/sec 1.04 45.2±0.99µs ? ?/sec empty_systems/100_systems 1.00 46.7±2.27µs ? ?/sec 1.03 48.1±1.25µs ? ?/sec ``` </details> ## Migration Guide ### App `runner` and SubApp `extract` functions are now required to be Send This was changed to enable pipelined rendering. If this breaks your use case please report it as these new bounds might be able to be relaxed. ## ToDo * [x] redo benchmarking * [x] reinvestigate the perf of the try_tick -> run change for task pool scope	2023-01-19 23:45:46 +00:00
Yyee	a41e869aa9	Expose symphonia features from rodio in bevy_audio and bevy (#6388) ... # Objective Fix #6301 ## Solution Add new features in `bevy_audio` to use `symphonia` sound format from `rodio` Also add in `bevy`	2023-01-09 19:05:30 +00:00
targrub	329b71fa62	Break CorePlugin into TaskPoolPlugin, TypeRegistrationPlugin, FrameCountPlugin. (#7083) ... # Objective - Fixes #7081. ## Solution - Moved functionality from kitchen sink plugin `CorePlugin` to separate plugins, `TaskPoolPlugin`, `TypeRegistrationPlugin`, `FrameCountPlugin`. `TaskPoolOptions` resource should now be used with `TaskPoolPlugin`. ## Changelog Minimal changes made (code kept in `bevy_core/lib.rs`). ## Migration Guide - `CorePlugin` broken into separate plugins. If not using `DefaultPlugins` or `MinimalPlugins` `PluginGroup`s, the replacement for `CorePlugin` is now to add `TaskPoolPlugin`, `TypeRegistrationPlugin`, and `FrameCountPlugin` to the app. ## Notes - Consistent with Bevy goal "modularity over deep integration" but the functionality of `TypeRegistrationPlugin` and `FrameCountPlugin` is weak (the code has to go somewhere, though!). - No additional tests written.	2023-01-05 11:42:35 +00:00
Jinlei Li	741a91ed46	Replace WgpuAdapterInfo with RenderAdapterInfo in the documentation. (#7036) ... # Objective Fixes #6598 In addition, macOS can also support GL backends through ANGLE.	2022-12-26 19:47:01 +00:00
Chris Juchem	e2d1d9dff8	Update dead links in DefaultPlugins docs (#6695) ... # Objective - Fix dead links on this docs page: https://docs.rs/bevy/0.9.0/bevy/struct.DefaultPlugins.html ## Solution - Point links to the imported versions instead of the versions in external crates.	2022-11-21 20:12:31 +00:00
Mike	8ebd4d909c	add span to winit event handler (#6612) ... # Objective - Add a span for the winit event handler. I've found this useful in my PR for pipelined rendering and I've seen it come up in a few other contexts now. 	2022-11-14 23:08:31 +00:00
Zhell	af2a199254	[Fixes #6030] Bevy scene optional serde (#6076) ... # Objective Fixes #6030, making ``serde`` optional. ## Solution This was solved by making a ``serialize`` feature that can activate ``serde``, which is now optional. When ``serialize`` is deactivated, the ``Plugin`` implementation for ``ScenePlugin`` does nothing. Co-authored-by: Linus Käll <linus.kall.business@gmail.com>	2022-11-14 23:08:22 +00:00
github-actions[bot]	920543c824	Release 0.9.0 (#6568) ... Preparing next release This PR has been auto-generated	2022-11-12 20:01:29 +00:00
Alice Cecile	334e09892b	Revert "Show prelude re-exports in docs (#6448)" (#6449) ... This reverts commit 53d387f340. # Objective Reverts #6448. This didn't have the intended effect: we're now getting bevy::prelude shown in the docs again. Co-authored-by: Alejandro Pascual <alejandro.pascual.pozo@gmail.com>	2022-11-02 20:40:45 +00:00
Alejandro Pascual	53d387f340	Show prelude re-exports in docs (#6448) ... # Objective - Right now re-exports are completely hidden in prelude docs. - Fixes #6433 ## Solution - We could show the re-exports without inlining their documentation.	2022-11-02 19:35:06 +00:00
Hennadii Chernyshchyk	87d4c6380d	Add serialize feature to bevy_core (#6423) ... # Objective `bevy_core` is missing a feature corresponding to the `serialize` feature on the `bevy` crate. Similar to #6378 and https://github.com/bevyengine/bevy/pull/6379 to serialize `Name` easily. ## Solution Add this feature and hand-written serialization for `Name` (to avoid storing `hash` field). --- ## Changelog ### Added * `Serialize` and `Deserialize` derives for `Name` under `serialize` feature.	2022-10-31 21:20:57 +00:00
François	8cdd977a12	Unique plugin (#6411) ... # Objective - Make it impossible to add a plugin twice - This is going to be more a risk for plugins with configurations, to avoid things like `App::new().add_plugins(DefaultPlugins).add_plugin(ImagePlugin::default_nearest())` ## Solution - Panic when a plugin is added twice - It's still possible to mark a plugin as not unique by overriding `is_unique` - ~~Simpler version of~~ #3988 (not simpler anymore because of how `PluginGroupBuilder` implements `PluginGroup`)	2022-10-31 16:12:19 +00:00
amiani	bf6c457553	add serialize feature to bevy_transform (#6379) ... # Objective Fixes #6378 `bevy_transform` is missing a feature corresponding to the `serialize` feature on the `bevy` crate. ## Solution Adds a `serialize` feature to `bevy_transform`. Derives `serde::Serialize` and `Deserialize` when feature is enabled.	2022-10-31 16:12:15 +00:00