# Objective
Speed up bundle insertion and spawning from a bundle.
## Solution
Use the same technique used in #6800 to remove the branch on storage type when writing components from a `Bundle` into storage.
- Add a `StorageType` argument to the closure on `Bundle::get_components`.
- Pass `C::Storage::STORAGE_TYPE` into that argument.
- Match on that argument instead of reading from a `Vec<StorageType>` in `BundleInfo`.
- Marked all implementations of `Bundle::get_components` as inline to encourage dead code elimination.
The `Vec<StorageType>` in `BundleInfo` was also removed as it's no longer needed. If users were reliant on this, they can either use the compile time constants or fetch the information from `Components`. Should save a rather negligible amount of memory.
## Performance
Microbenchmarks show a slight improvement to inserting components into existing entities, as well as spawning from a bundle. Ranging about 8-16% faster depending on the benchmark.
```
group main soft-constant-write-components
----- ---- ------------------------------
add_remove/sparse_set 1.08 1019.0±80.10µs ? ?/sec 1.00 944.6±66.86µs ? ?/sec
add_remove/table 1.07 1343.3±20.37µs ? ?/sec 1.00 1257.3±18.13µs ? ?/sec
add_remove_big/sparse_set 1.08 1132.4±263.10µs ? ?/sec 1.00 1050.8±240.74µs ? ?/sec
add_remove_big/table 1.02 2.6±0.05ms ? ?/sec 1.00 2.5±0.08ms ? ?/sec
get_or_spawn/batched 1.15 401.4±17.76µs ? ?/sec 1.00 349.3±11.26µs ? ?/sec
get_or_spawn/individual 1.13 732.1±43.35µs ? ?/sec 1.00 645.6±41.44µs ? ?/sec
insert_commands/insert 1.12 623.9±37.48µs ? ?/sec 1.00 557.4±34.99µs ? ?/sec
insert_commands/insert_batch 1.16 401.4±17.00µs ? ?/sec 1.00 347.4±12.87µs ? ?/sec
insert_simple/base 1.08 416.9±5.60µs ? ?/sec 1.00 385.2±4.14µs ? ?/sec
insert_simple/unbatched 1.06 934.5±44.58µs ? ?/sec 1.00 881.3±47.86µs ? ?/sec
spawn_commands/2000_entities 1.09 190.7±11.41µs ? ?/sec 1.00 174.7±9.15µs ? ?/sec
spawn_commands/4000_entities 1.10 386.5±25.33µs ? ?/sec 1.00 352.3±18.81µs ? ?/sec
spawn_commands/6000_entities 1.10 586.2±34.42µs ? ?/sec 1.00 535.3±27.25µs ? ?/sec
spawn_commands/8000_entities 1.08 778.5±45.15µs ? ?/sec 1.00 718.0±33.66µs ? ?/sec
spawn_world/10000_entities 1.04 1026.4±195.46µs ? ?/sec 1.00 985.8±253.37µs ? ?/sec
spawn_world/1000_entities 1.06 103.8±20.23µs ? ?/sec 1.00 97.6±18.22µs ? ?/sec
spawn_world/100_entities 1.15 11.4±4.25µs ? ?/sec 1.00 9.9±1.87µs ? ?/sec
spawn_world/10_entities 1.05 1030.8±229.78ns ? ?/sec 1.00 986.2±231.12ns ? ?/sec
spawn_world/1_entities 1.01 105.1±23.33ns ? ?/sec 1.00 104.6±31.84ns ? ?/sec
```
---
## Changelog
Changed: `Bundle::get_components` now takes a `FnMut(StorageType, OwningPtr)`. The provided storage type must be correct for the component being fetched.
# Objective
Partially address #3492.
## Solution
Document the remaining undocumented members of `bevy_utils` and set `warn(missing_docs)` on the crate level. Also enabled `clippy::undocumented_unsafe_blocks` as a warning on the crate to keep it in sync with `bevy_ecs`'s warnings.
# Objective
```rust
// makes clippy complain about 'taking a mutable reference to a `const` item'
let color = *Color::RED.set_a(0.5);
// Now you can do
let color = Color::RED.with_a(0.5);
```
## Changelog
Added `with_r`, `with_g`, `with_b`, and `with_a` to `Color`.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/6417
## Solution
- clear_trackers was not being called on the render world. This causes the removed components vecs to continuously grow. This PR adds clear trackers to the end of RenderStage::Cleanup
## Migration Guide
The call to `clear_trackers` in `App` has been moved from the schedule to App::update for the main world and calls to `clear_trackers` have been added for sub_apps in the same function. This was due to needing stronger guarantees. If clear_trackers isn't called on a world it can lead to memory leaks in `RemovedComponents`.
# Objective
* Implementing a custom `SystemParam` by hand requires implementing three traits -- four if it is read-only.
* The trait `SystemParamFetch<'w, 's>` is a workaround from before we had generic associated types, and is no longer necessary.
## Solution
* Combine the trait `SystemParamFetch` with `SystemParamState`.
* I decided to remove the `Fetch` name and keep the `State` name, since the former was consistently conflated with the latter.
* Replace the trait `ReadOnlySystemParamFetch` with `ReadOnlySystemParam`, which simplifies trait bounds in generic code.
---
## Changelog
- Removed the trait `SystemParamFetch`, moving its functionality to `SystemParamState`.
- Replaced the trait `ReadOnlySystemParamFetch` with `ReadOnlySystemParam`.
## Migration Guide
The trait `SystemParamFetch` has been removed, and its functionality has been transferred to `SystemParamState`.
```rust
// Before
impl SystemParamState for MyParamState {
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
}
impl<'w, 's> SystemParamFetch<'w, 's> for MyParamState {
type Item = MyParam<'w, 's>;
fn get_param(...) -> Self::Item;
}
// After
impl SystemParamState for MyParamState {
type Item<'w, 's> = MyParam<'w, 's>; // Generic associated types!
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
fn get_param<'w, 's>(...) -> Self::Item<'w, 's>;
}
```
The trait `ReadOnlySystemParamFetch` has been replaced with `ReadOnlySystemParam`.
```rust
// Before
unsafe impl ReadOnlySystemParamFetch for MyParamState {}
// After
unsafe impl<'w, 's> ReadOnlySystemParam for MyParam<'w, 's> {}
```
# Objective
It's not clear to users how to handle `!Sync` types as components and resources in the absence of engine level support for them.
## Solution
Added a section to `Component`'s and `Resource`'s type level docs on available options for making a type `Sync` when it holds `!Sync` fields, linking `bevy_utils::synccell::SyncCell` and the currently unstable `std::sync::Exclusive`.
Also added a compile_fail doctest that illustrates how to apply `SyncCell`. These will break when/if #6572 gets merged, at which point these docs should be updated.
# Objective
This is an adoption of #5792. Fixes#5791.
## Solution
Implemented all the required reflection traits for `VecDeque`, taking from `Vec`'s impls.
---
## Changelog
Added: `std::collections::VecDeque` now implements `Reflect` and all relevant traits.
Co-authored-by: james7132 <contact@jamessliu.com>
# Objective
- Get rid of giant match statement to get PixelInfo.
- This will allow for supporting any texture that is uncompressed, instead of people needing to PR in any textures that are supported in wgpu, but not bevy.
## Solution
- More conservative alternative to https://github.com/bevyengine/bevy/pull/6788, where we don't try to make some of the calculations correct for compressed types.
- Delete `PixelInfo` and get the pixel_size directly from wgpu. Data from wgpu is here: https://docs.rs/wgpu-types/0.14.0/src/wgpu_types/lib.rs.html#2359
- Panic if the texture is a compressed type. An integer byte size of a pixel is no longer a valid concept when talking about compressed textures.
- All internal usages use `pixel_size` and not `pixel_info` and are on uncompressed formats. Most of these usages are on either explicit texture formats or slightly indirectly through `TextureFormat::bevy_default()`. The other uses are in `TextureAtlas` and have other calculations that assumes the texture is uncompressed.
## Changelog
- remove `PixelInfo` and get `pixel_size` from wgpu
## Migration Guide
`PixelInfo` has been removed. `PixelInfo::components` is equivalent to `texture_format.describe().components`. `PixelInfo::type_size` can be gotten from `texture_format.describe().block_size/ texture_format.describe().components`. But note this can yield incorrect results for some texture types like Rg11b10Float.
# Objective
Adds a cylinder shape. Fixes#2282.
## Solution
- I added a custom cylinder shape, taken from [here](https://github.com/rparrett/typey_birb/blob/main/src/cylinder.rs) with permission from @rparrett.
- I also added the cylinder shape to the `3d_shapes` example scene.
---
## Changelog
- Added cylinder shape
Co-Authored-By: Rob Parrett <robparrett@gmail.com>
Co-Authored-By: davidhof <7483215+davidhof@users.noreply.github.com>
# Objective
Fixes#6224, add ``dbg``, ``info``, ``warn`` and ``error`` system piping adapter variants to expand #5776, which call the corresponding re-exported [bevy_log macros](https://docs.rs/bevy/latest/bevy/log/macro.info.html) when the result is an error.
## Solution
* Added ``dbg``, ``info``, ``warn`` and ``error`` system piping adapter variants to ``system_piping.rs``.
* Modified and added tests for these under examples in ``system_piping.rs``.
# Objective
- Make `AudioOutput` a `Resource`.
## Solution
- Do not store `OutputStream` in the struct.
- `mem::forget` `OutputStream`.
---
## Changelog
### Added
- `AudioOutput` is now a `Resource`.
## Migration Guide
- Use `Res<AudioOutput<Source>>` instead of `NonSend<AudioOutput<Source>>`. Same for `Mut` variants.
# Objective
Resolves#4597 (based on the work from #6056 and a refresh of #4147)
When using reflection, we may often end up in a scenario where we have a Dynamic representing a certain type. Unfortunately, we can't just call `MyType::from_reflect` as we do not have knowledge of the concrete type (`MyType`) at runtime.
Such scenarios happen when we call `Reflect::clone_value`, use the reflection deserializers, or create the Dynamic type ourselves.
## Solution
Add a `ReflectFromReflect` type data struct.
This struct allows us to easily convert Dynamic representations of our types into their respective concrete instances.
```rust
#[derive(Reflect, FromReflect)]
#[reflect(FromReflect)] // <- Register `ReflectFromReflect`
struct MyStruct(String);
let type_id = TypeId::of::<MyStruct>();
// Register our type
let mut registry = TypeRegistry::default();
registry.register::<MyStruct>();
// Create a concrete instance
let my_struct = MyStruct("Hello world".to_string());
// `Reflect::clone_value` will generate a `DynamicTupleStruct` for tuple struct types
let dynamic_value: Box<dyn Reflect> = my_struct.clone_value();
assert!(!dynamic_value.is::<MyStruct>());
// Get the `ReflectFromReflect` type data from the registry
let rfr: &ReflectFromReflect = registry
.get_type_data::<ReflectFromReflect>(type_id)
.unwrap();
// Call `FromReflect::from_reflect` on our Dynamic value
let concrete_value: Box<dyn Reflect> = rfr.from_reflect(&dynamic_value);
assert!(concrete_value.is::<MyStruct>());
```
### Why this PR?
###### Why now?
The three main reasons I closed#4147 were that:
1. Registering `ReflectFromReflect` is clunky (deriving `FromReflect` *and* registering `ReflectFromReflect`)
2. The ecosystem and Bevy itself didn't seem to pay much attention to deriving `FromReflect`
3. I didn't see a lot of desire from the community for such a feature
However, as time has passed it seems 2 and 3 are not really true anymore. Bevy is internally adding lots more `FromReflect` derives, which should make this feature all the more useful. Additionally, I have seen a growing number of people look for something like `ReflectFromReflect`.
I think 1 is still an issue, but not a horrible one. Plus it could be made much, much better using #6056. And I think splitting this feature out of #6056 could lead to #6056 being adopted sooner (or at least make the need more clear to users).
###### Why not just re-open #4147?
The main reason is so that this PR can garner more attention than simply re-opening the old one. This helps bring fresh eyes to the PR for potentially more perspectives/reviews.
---
## Changelog
* Added `ReflectFromReflect`
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
#6547 accidentally broke change detection for SparseSet components by using `Ticks::from_tick_cells` with the wrong argument order.
## Solution
Use the right argument order. Add a regression test.
# Objective
The window event types currently don't support reflection. This PR adds support to them (as requested [here](https://github.com/bevyengine/bevy/issues/6223#issuecomment-1273852329)).
## Solution
Implement `Reflect` + `FromReflect` for window event types. Relevant traits are also being reflected with `#[reflect(...)]` attributes.
Additionally, this PR derives `Reflect` + `FromReflect` for `WindowDescriptor` and the types it depends on so that `CreateWindow` events can be fully manipulated through reflection.
Finally, this PR adds `FromReflect` for `PathBuf` as a value type, which is needed for `FileDragAndDrop`.
This adds the "glam" feature to the `bevy_reflect` dependency for package `bevy_window`. Since `bevy_window` transitively depends on `glam` already, all this brings in are the reflection `impl`s.
## Open questions
Should `app.register_type::<PathBuf>();` be moved to `CorePlugin`? I added it to `WindowPlugin` because that's where it's used and `CorePlugin` doesn't seem to register all the missing std types, but it would also make sense in `CorePlugin` I believe since it's a commonly used type.
---
## Changelog
Added:
- Implemented `Reflect` + `FromReflect` for window events and related types. These types are automatically registered when adding the `WindowPlugin`.
# Objective
- Fixes#6841
- In some case, the number of maximum storage buffers is `u32::MAX` which doesn't fit in a `i32`
## Solution
- Add an option to have a `u32` in a `ShaderDefVal`
having `doc(hidden)` on the read only version of a generated mutable world query leads to docs on the readonly item having a dead link. It also makes it annoying to have nice docs for libraries attempting to expose derived `WorldQuery` structs as re-exporting the read only item does not cause it to appear in docs even though it would be intended for users to know about the read only world query and use it.
# Objective
Fixes#6866.
## Solution
Docs now should describe what the _front_, _first_, _back_, and _last_ elements are for an implementor of the `bevy::reflect::list::List` Trait. Further, the docs should describe how `bevy::reflect::list::List::push` and `bevy::reflect::list::List::pop` should act on these elements.
Co-authored-by: Linus Käll <linus.kall.business@gmail.com>
# Objective
Prevent future unsoundness that was seen in #6623.
## Solution
Newtype both indexes in `Archetype` and `Table` as `ArchetypeRow` and `TableRow`. This avoids weird numerical manipulation on the indices, and can be stored and treated opaquely. Also enforces the source and destination of where these indices at a type level.
---
## Changelog
Changed: `Archetype` indices and `Table` rows have been newtyped as `ArchetypeRow` and `TableRow`.
# Objective
`EntityRef::get` and friends all type erase calls to fetch the target components by using passing in the `TypeId` instead of using generics. This is forcing a lookup to `Components` to fetch the storage type. This adds an extra memory lookup and forces a runtime branch instead of allowing the compiler to optimize out the unused branch.
## Solution
Leverage `Component::Storage::STORAGE_TYPE` as a constant instead of fetching the metadata from `Components`.
## Performance
This has a near 2x speedup for all calls to `World::get`. Microbenchmark results from my local machine. `Query::get_component`, which uses `EntityRef::get` internally also show a slight speed up. This has closed the gap between `World::get` and `Query::get` for the same use case.
```
group entity-ref-generics main
----- ------------------- ----
query_get_component/50000_entities_sparse 1.00 890.6±40.42µs ? ?/sec 1.10 980.6±28.22µs ? ?/sec
query_get_component/50000_entities_table 1.00 968.5±73.73µs ? ?/sec 1.08 1048.8±31.76µs ? ?/sec
query_get_component_simple/system 1.00 703.2±4.37µs ? ?/sec 1.00 702.1±6.13µs ? ?/sec
query_get_component_simple/unchecked 1.02 855.8±8.98µs ? ?/sec 1.00 843.1±8.19µs ? ?/sec
world_get/50000_entities_sparse 1.00 202.3±3.15µs ? ?/sec 1.85 374.0±20.96µs ? ?/sec
world_get/50000_entities_table 1.00 193.0±1.78µs ? ?/sec 2.02 389.2±26.55µs ? ?/sec
world_query_get/50000_entities_sparse 1.01 162.4±2.23µs ? ?/sec 1.00 161.3±0.95µs ? ?/sec
world_query_get/50000_entities_table 1.00 199.9±0.63µs ? ?/sec 1.00 200.2±0.74µs ? ?/sec
```
This should also, by proxy, speed up the `ReflectComponent` APIs as most of those use `World::get` variants internally.
# Objective
- Fixes#3004
## Solution
- Replaced all the types with their fully quallified names
- Replaced all trait methods and inherent methods on dyn traits with their fully qualified names
- Made a new file `fq_std.rs` that contains structs corresponding to commonly used Structs and Traits from `std`. These structs are replaced by their respective fully qualified names when used inside `quote!`
# Objective
- Fixes#6711
## Solution
- Change the `path` function parameter of `dynamically_load_plugin` and `DynamicPluginExt::load_plugin` to a generic with `AsRef<OsStr>` bound
# Objective
`prepare_asset` for Image has an alternate path for texture creation that is used when the image is not compressed and does not contain mipmaps. This additional code path is unnecessary as `render_device.create_texture_with_data()` will handle both cases correctly.
## Solution
Use `render_device.create_texture_with_data()` in all cases.
Tested successfully with the following examples:
- load_gltf
- render_to_texture
- texture
- 3d_shapes
- sprite
- sprite_sheet
- array_texture
- shader_material_screenspace_texture
- skybox (though this already would use the `create_texture_with_data()` branch anyway)
# Objective
The methods `World::change_tick` and `World::read_change_tick` lack documentation and have confusingly similar behavior.
## Solution
Add documentation and clarify the distinction between the two functions.
The PR fixes the interface of `EventReader::clear`. Currently, the method consumes the reader, which makes it unusable.
## Changelog
- `EventReader::clear` now takes a mutable reference instead of consuming the event reader.
## Migration Guide
`EventReader::clear` now takes a mutable reference instead of consuming the event reader. This means that `clear` now needs explicit mutable access to the reader variable, which previously could have been omitted in some cases:
```rust
// Old (0.9)
fn clear_events(reader: EventReader<SomeEvent>) {
reader.clear();
}
// New (0.10)
fn clear_events(mut reader: EventReader<SomeEvent>) {
reader.clear();
}
```
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Fixes#6812.
## Solution
- Replaced `World::read_change_ticks` with `World::change_ticks` within `bevy_ecs` crate in places where `World` references were mutable.
---
# Objective
Partially addresses #5504. Allow users to get an `Iterator<Item = EntityRef<'a>>` over all entities in the `World`.
## Solution
Change `World::iter_entities` to return an iterator of `EntityRef` instead of `Entity`.
Not sure how to tackle making an `Iterator<Item = EntityMut<'_>>` without being horribly unsound. Might need to wait for `LendingIterator` to stabilize so we can ensure only one of them is valid at a given time.
---
## Changelog
Changed: `World::iter_entities` now returns an iterator of `EntityRef` instead of `Entity`.
# Objective
Currently, the `SystemParam` derive forces you to declare the lifetime parameters `<'w, 's>`, even if you don't use them.
If you don't follow this structure, the error message is quite nasty.
### Example (before):
```rust
#[derive(SystemParam)]
pub struct EventWriter<'w, 's, E: Event> {
events: ResMut<'w, Events<E>>,
// The derive forces us to declare the `'s` lifetime even though we don't use it,
// so we have to add this `PhantomData` to please rustc.
#[system_param(ignore)]
_marker: PhantomData<&'s ()>,
}
```
## Solution
* Allow the user to omit either lifetime.
* Emit a descriptive error if any lifetimes used are invalid.
### Example (after):
```rust
#[derive(SystemParam)]
pub struct EventWriter<'w, E: Event> {
events: ResMut<'w, Events<E>>,
}
```
---
## Changelog
* The `SystemParam` derive is now more flexible, allowing you to omit unused lifetime parameters.
Updates the requirements on [tracing-chrome](https://github.com/thoren-d/tracing-chrome) to permit the latest version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/thoren-d/tracing-chrome/releases">tracing-chrome's releases</a>.</em></p>
<blockquote>
<h2>Release v0.7.0</h2>
<ul>
<li>Add <code>start_new</code> to <code>FlushGuard</code>. You can now generate multiple traces in one run!</li>
<li>Clean up dependencies</li>
<li>Make events thread-scoped</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="8760d81206"><code>8760d81</code></a> Prepare for 0.7 (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/16">#16</a>)</li>
<li><a href="a30bfb78d2"><code>a30bfb7</code></a> Update documentation (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/15">#15</a>)</li>
<li><a href="3fe24ff44d"><code>3fe24ff</code></a> Save thread names for start_new (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/14">#14</a>)</li>
<li><a href="fa8a0ff8ba"><code>fa8a0ff</code></a> Adding "Start New" feature that allows a user to finalize writing to the (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/11">#11</a>)</li>
<li><a href="d3059d66b3"><code>d3059d6</code></a> Directly depend on crossbeam_channel (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/12">#12</a>)</li>
<li><a href="441dba5c21"><code>441dba5</code></a> change scope of instant events to thread (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/13">#13</a>)</li>
<li>See full diff in <a href="https://github.com/thoren-d/tracing-chrome/compare/v0.6.0...v0.7.0">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
# Objective
Fixes#6827
## Solution
Use the `Color::rgba_linear` function instead of the `Color::rgba` function to correctly interpret colors from glTF files in the linear color space rather than the incorrect sRGB color space
# Objective
> Followup to [this](https://github.com/bevyengine/bevy/pull/6755#discussion_r1032671178) comment
Rearrange the impls in the `impls/std.rs` file.
The issue was that I had accidentally misplaced the impl for `Option<T>` and put it between the `Cow<'static, str>` impls. This is just a slight annoyance and readability issue.
## Solution
Move the `Option<T>` and `&'static Path` impls around to be more readable.
# Objective
The soundness of the ECS `World` partially relies on the correctness of the state of `Entities` stored within it. We're currently allowing users to (unsafely) mutate it, as well as readily construct it without using a `World`. While this is not strictly unsound so long as users (including `bevy_render`) safely use the APIs, it's a fairly easy path to unsoundness without much of a guard rail.
Addresses #3362 for `bevy_ecs::entity`. Incorporates the changes from #3985.
## Solution
Remove `Entities`'s `Default` implementation and force access to the type to only be through a properly constructed `World`.
Additional cleanup for other parts of `bevy_ecs::entity`:
- `Entity::index` and `Entity::generation` are no longer `pub(crate)`, opting to force the rest of bevy_ecs to use the public interface to access these values.
- `EntityMeta` is no longer `pub` and also not `pub(crate)` to attempt to cut down on updating `generation` without going through an `Entities` API. It's currently inaccessible except via the `pub(crate)` Vec on `Entities`, there was no way for an outside user to use it.
- Added `Entities::set`, an unsafe `pub(crate)` API for setting the location of an Entity (parallel to `Entities::get`) that replaces the internal case where we need to set the location of an entity when it's been spawned, moved, or despawned.
- `Entities::alloc_at_without_replacement` is only used in `World::get_or_spawn` within the first party crates, and I cannot find a public use of this API in any ecosystem crate that I've checked (via GitHub search).
- Attempted to document the few remaining undocumented public APIs in the module.
---
## Changelog
Removed: `Entities`'s `Default` implementation.
Removed: `EntityMeta`
Removed: `Entities::alloc_at_without_replacement` and `AllocAtWithoutReplacement`.
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Since #5900 3d examples fail in wasm
```
ERROR crates/bevy_render/src/render_resource/pipeline_cache.rs:660 failed to process shader: Unknown shader def: 'AVAILABLE_STORAGE_BUFFER_BINDINGS'
```
## Solution
- Fix it by always adding the shaderdef `AVAILABLE_STORAGE_BUFFER_BINDINGS` with the actual value, instead of 3 when 3 or more were available
# Objective
- Support textures in `Rgb9e5Ufloat` format.
## Solution
- Add `TextureFormatPixelInfo` for `Rgb9e5Ufloat`.
Tested this with a `Rgb9e5Ufloat` encoded KTX2 texture.
# Objective
- Every usage of `DrawFunctionsInternals::get_id()` was followed by a `.unwrap()`. which just adds boilerplate.
## Solution
- Introduce a fallible version of `DrawFunctionsInternals::get_id()` and use it where possible.
- I also took the opportunity to improve the error message a little in the case where it fails.
---
## Changelog
- Added `DrawFunctionsInternals::id()`
# Objective
Document `bevy_ecs::archetype` and and declutter the public documentation for the module by making types non-`pub`.
Addresses #3362 for `bevy_ecs::archetype`.
## Solution
- Add module level documentation.
- Add type and API level documentation for all public facing types.
- Make `ArchetypeId`, `ArchetypeGeneration`, and `ArchetypeComponentId` truly opaque IDs that are not publicly constructable.
- Make `AddBundle` non-pub, make `Edges::get_add_bundle` return a `Option<ArchetypeId>` and fork the existing function into `Edges::get_add_bundle_internal`.
- Remove `pub(crate)` on fields that have a corresponding pub accessor function.
- Removed the `Archetypes: Default` impl, opting for a `pub(crate) fn new` alternative instead.
---
## Changelog
Added: `ArchetypeGeneration` now implements `Ord` and `PartialOrd`.
Removed: `Archetypes`'s `Default` implementation.
Removed: `Archetype::new` and `Archetype::is_empty`.
Removed: `ArchetypeId::new` and `ArchetypeId::value`.
Removed: `ArchetypeGeneration::value`
Removed: `ArchetypeIdentity`.
Removed: `ArchetypeComponentId::new` and `ArchetypeComponentId::value`.
Removed: `AddBundle`. `Edges::get_add_bundle` now returns `Option<ArchetypeId>`
# Objective
- The documentation describing different ways to spawn an Entity is missing reference to "method" for "Spawn an entity with components".
## Solution
- Update the documentation to add the reference to `World::spawn`.
# Objective
* Fix#6668
* There is no need to panic when a parenting operation is redundant, as no invalid state is entered.
## Solution
Make `push_children` idempotent.
# Objective
One of the use-cases for the function `Entity::from_raw` is creating placeholder entity ids, which are meant to be overwritten later. If we use a constant for this instead of `from_raw`, it is more ergonomic and self-documenting.
## Solution
Add a constant that returns an entity ID with an index of `u32::MAX` and a generation of zero. Users are instructed to overwrite this value before using it.
# Objective
When a global tracing subscriber has already been set, `LogPlugin` panics with an error message explaining this. However, if a global logger has already been set, it simply panics on an unwrap.
#6426 mentiones the panic and has been fixed by unique plugins, but the panic can still occur if a logger has been set through different means or multiple apps are created, as in #4934. The solution to that specific case isn't clear; this PR only fixes the missing error message.
## Solution
- ~add error message to panic~
- turn into warning
