# Objective
This PR update breakout to use the new 0.15 Required Component feature
instead of the Bundle.
Add more information in the comment about where to find more info about
Required Components.
## Solution
Replace `#[derive(Bundle)]` with a new Wall component and `#[require()]`
Macro to include the other components.
## Testing
Tested with `cargo test` as well tested the game manually with `cargo
run --example breakout` It looks to me that it works like it used to
before the changes. Tested on Arch Linux, Wayland
---------
Co-authored-by: Arnav Mummineni <45217840+RCoder01@users.noreply.github.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
This commit adds support for *multidraw*, which is a feature that allows
multiple meshes to be drawn in a single drawcall. `wgpu` currently
implements multidraw on Vulkan, so this feature is only enabled there.
Multiple meshes can be drawn at once if they're in the same vertex and
index buffers and are otherwise placed in the same bin. (Thus, for
example, at present the materials and textures must be identical, but
see #16368.) Multidraw is a significant performance improvement during
the draw phase because it reduces the number of rebindings, as well as
the number of drawcalls.
This feature is currently only enabled when GPU culling is used: i.e.
when `GpuCulling` is present on a camera. Therefore, if you run for
example `scene_viewer`, you will not see any performance improvements,
because `scene_viewer` doesn't add the `GpuCulling` component to its
camera.
Additionally, the multidraw feature is only implemented for opaque 3D
meshes and not for shadows or 2D meshes. I plan to make GPU culling the
default and to extend the feature to shadows in the future. Also, in the
future I suspect that polyfilling multidraw on APIs that don't support
it will be fruitful, as even without driver-level support use of
multidraw allows us to avoid expensive `wgpu` rebindings.
# Objective
The "mehses" typo introduced in a review comment
[here](https://github.com/bevyengine/bevy/pull/16657#discussion_r1870834999)
hurts my soul, it was merged right as I was about to comment about it :(
## Solution
Fix it :D
(also, why didn't the CI typo checker catch this?)
# Objective
- Remove `derive_more`'s error derivation and replace it with
`thiserror`
## Solution
- Added `derive_more`'s `error` feature to `deny.toml` to prevent it
sneaking back in.
- Reverted to `thiserror` error derivation
## Notes
Merge conflicts were too numerous to revert the individual changes, so
this reversion was done manually. Please scrutinise carefully during
review.
## Objective
I was resolving a conflict between #16132 and my PR #15929 and thought
the `clone_entity` commands made more sense in `EntityCommands`.
## Solution
Moved `Commands::clone_entity` to `EntityCommands::clone`, moved
`Commands::clone_entity_with` to `EntityCommands::clone_with`.
## Testing
Ran the two tests that used the old methods.
## Showcase
```
// Create a new entity and keep its EntityCommands.
let mut entity = commands.spawn((ComponentA(10), ComponentB(20)));
// Create a clone of the first entity
let mut entity_clone = entity.clone();
```
The only potential downside is that the method name is now the same as
the one from the `Clone` trait. `EntityCommands` doesn't implement
`Clone` though, so there's no actual conflict.
Maybe I'm biased because this'll work better with my PR, but I think the
UX is nicer regardless.
# Objective
Volumetric fog was broken by #13746.
Looks like this particular shader just got missed. I don't see any other
instances of `unpack_offset_and_counts` in the codebase.
```
2024-12-06T03:18:42.297494Z ERROR bevy_render::render_resource::pipeline_cache: failed to process shader:
error: no definition in scope for identifier: 'bevy_pbr::clustered_forward::unpack_offset_and_counts'
┌─ crates/bevy_pbr/src/volumetric_fog/volumetric_fog.wgsl:312:29
│
312 │ let offset_and_counts = bevy_pbr::clustered_forward::unpack_offset_and_counts(cluster_index);
│ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ unknown identifier
│
= no definition in scope for identifier: 'bevy_pbr::clustered_forward::unpack_offset_and_counts'
```
## Solution
Use `unpack_clusterable_object_index_ranges` to get the indices for
point/spot lights.
## Testing
`cargo run --example volumetric_fog`
`cargo run --example fog_volumes`
`cargo run --example scrolling_fog`
# Objective
The weekly beta compile test workflow can be useful to people who have
forked the repository.
However, there are a few small issues with how this workflow is
currently set up:
* Scheduled workflows run on the base/default branch, with no way
(currently) to change this. On forks, the base/default branch is usually
kept in sync with the main Bevy repository, meaning that running this
workflow on forks would just be a waste of resources. (See
[here](https://docs.github.com/en/actions/writing-workflows/choosing-when-your-workflow-runs/events-that-trigger-workflows#schedule)
- "Scheduled workflows will only run on the default branch.")
* Even if there was a way to change the branch that a scheduled workflow
runs on, forks default to not having an issue tracker.
* Even in the event that a fork's issue tracker is enabled, most users
probably don't want to receive automated issues in the event of a
compilation failure.
Because of these reasons, this workflow is irrelevant for 99% of forks.
## Solution
We now skip all jobs on the `Weekly beta compile test` workflow, if we
detect we're running this workflow on a fork.
## Testing
Testing? Who needs testing? (Seriously though, I made sure the syntax is
correct.)
# Objective
- Contributes to #15460
## Solution
- Added the following features:
- `std` (default)
- `async_executor` (default)
- `edge_executor`
- `critical-section`
- `portable-atomic`
- Added [`edge-executor`](https://crates.io/crates/edge-executor) as a
`no_std` alternative to `async-executor`.
- Updated the `single_threaded_task_pool` to work in `no_std`
environments by gating its reliance on `thread_local`.
## Testing
- Added to `compile-check-no-std` CI command
## Notes
- In previous iterations of this PR, a custom `async-executor`
alternative was vendored in. This raised concerns around maintenance and
testing. In this iteration, an existing version of that same vendoring
is now used, but _only_ in `no_std` contexts. For existing `std`
contexts, the original `async-executor` is used.
- Due to the way statics work, certain `TaskPool` operations have added
restrictions around `Send`/`Sync` in `no_std`. This is because there
isn't a straightforward way to create a thread-local in `no_std`. If
these added constraints pose an issue we can revisit this at a later
date.
- If a user enables both the `async_executor` and `edge_executor`
features, we will default to using `async-executor`. Since enabling
`async_executor` requires `std`, we can safely assume we are in an `std`
context and use the original library.
---------
Co-authored-by: Mike <2180432+hymm@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
This adds a few minor items which were left out of the previous PR:
- Added synchronization from bevy_input_focus to bevy_a11y.
- Initialize InputFocusVisible resource.
- Make `input_focus` available from `bevy` module.
I've tested this using VoiceOver on Mac OS. It works, but it needs
considerable polish.
# Objective
- Fixes#16498
## Solution
- Trivially swaps ordering of hooks and observers for all call sites
where they are triggered for `on_replace` or `on_remove`
## Testing
- Just CI
---
## Migration Guide
The order of hooks and observers for `on_replace` and `on_remove` has
been swapped. Observers are now run before hooks. This is a more natural
ordering where the removal ordering is inverted compared to the
insertion ordering.
# Objective
Error handling in bevy is hard. See for reference
https://github.com/bevyengine/bevy/issues/11562,
https://github.com/bevyengine/bevy/issues/10874 and
https://github.com/bevyengine/bevy/issues/12660. The goal of this PR is
to make it better, by allowing users to optionally return `Result` from
systems as outlined by Cart in
<https://github.com/bevyengine/bevy/issues/14275#issuecomment-2223708314>.
## Solution
This PR introduces a new `ScheuleSystem` type to represent systems that
can be added to schedules. Instances of this type contain either an
infallible `BoxedSystem<(), ()>` or a fallible `BoxedSystem<(),
Result>`. `ScheuleSystem` implements `System<In = (), Out = Result>` and
replaces all uses of `BoxedSystem` in schedules. The async executor now
receives a result after executing a system, which for infallible systems
is always `Ok(())`. Currently it ignores this result, but more useful
error handling could also be implemented.
Aliases for `Error` and `Result` have been added to the `bevy_ecs`
prelude, as well as const `OK` which new users may find more friendly
than `Ok(())`.
## Testing
- Currently there are not actual semantics changes that really require
new tests, but I added a basic one just to make sure we don't break
stuff in the future.
- The behavior of existing systems is totally unchanged, including
logging.
- All of the existing systems tests pass, and I have not noticed
anything strange while playing with the examples
## Showcase
The following minimal example prints "hello world" once, then completes.
```rust
use bevy::prelude::*;
fn main() {
App::new().add_systems(Update, hello_world_system).run();
}
fn hello_world_system() -> Result {
println!("hello world");
Err("string")?;
println!("goodbye world");
OK
}
```
## Migration Guide
This change should be pretty much non-breaking, except for users who
have implemented their own custom executors. Those users should use
`ScheduleSystem` in place of `BoxedSystem<(), ()>` and import the
`System` trait where needed. They can choose to do whatever they wish
with the result.
## Current Work
+ [x] Fix tests & doc comments
+ [x] Write more tests
+ [x] Add examples
+ [X] Draft release notes
## Draft Release Notes
As of this release, systems can now return results.
First a bit of background: Bevy has hisotrically expected systems to
return the empty type `()`. While this makes sense in the context of the
ecs, it's at odds with how error handling is typically done in rust:
returning `Result::Error` to indicate failure, and using the
short-circuiting `?` operator to propagate that error up the call stack
to where it can be properly handled. Users of functional languages will
tell you this is called "monadic error handling".
Not being able to return `Results` from systems left bevy users with a
quandry. They could add custom error handling logic to every system, or
manually pipe every system into an error handler, or perhaps sidestep
the issue with some combination of fallible assignents, logging, macros,
and early returns. Often, users would just litter their systems with
unwraps and possible panics.
While any one of these approaches might be fine for a particular user,
each of them has their own drawbacks, and none makes good use of the
language. Serious issues could also arrise when two different crates
used by the same project made different choices about error handling.
Now, by returning results, systems can defer error handling to the
application itself. It looks like this:
```rust
// Previous, handling internally
app.add_systems(my_system)
fn my_system(window: Query<&Window>) {
let Ok(window) = query.get_single() else {
return;
};
// ... do something to the window here
}
// Previous, handling externally
app.add_systems(my_system.pipe(my_error_handler))
fn my_system(window: Query<&Window>) -> Result<(), impl Error> {
let window = query.get_single()?;
// ... do something to the window here
Ok(())
}
// Previous, panicking
app.add_systems(my_system)
fn my_system(window: Query<&Window>) {
let window = query.single();
// ... do something to the window here
}
// Now
app.add_systems(my_system)
fn my_system(window: Query<&Window>) -> Result {
let window = query.get_single()?;
// ... do something to the window here
Ok(())
}
```
There are currently some limitations. Systems must either return `()` or
`Result<(), Box<dyn Error + Send + Sync + 'static>>`, with no
in-between. Results are also ignored by default, and though implementing
a custom handler is possible, it involves writing your own custom ecs
executor (which is *not* recomended).
Systems should return errors when they cannot perform their normal
behavior. In turn, errors returned to the executor while running the
schedule will (eventually) be treated as unexpected. Users and library
authors should prefer to return errors for anything that disrupts the
normal expected behavior of a system, and should only handle expected
cases internally.
We have big plans for improving error handling further:
+ Allowing users to change the error handling logic of the default
executors.
+ Adding source tracking and optional backtraces to errors.
+ Possibly adding tracing-levels (Error/Warn/Info/Debug/Trace) to
errors.
+ Generally making the default error logging more helpful and
inteligent.
+ Adding monadic system combininators for fallible systems.
+ Possibly removing all panicking variants from our api.
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- This fixes raycast picking with lyon
- reverse winding of 2D meshes currently results in them being rendered
but not pickable as the raycast passes through the backface and would
only hit "from below"
## Solution
- Disables backface culling for Mesh2d
## Testing
- Tested picking with bevy_prototype_lyon
- Could probably use testing with Mesh3d (should not be affected) and
SimplifiedMesh (no experience with that, could have the same issue if
used for 2D?)
---------
Co-authored-by: Aevyrie <aevyrie@gmail.com>
The bindless PR (#16368) broke some examples:
* `specialized_mesh_pipeline` and `custom_shader_instancing` failed
because they expect to be able to render a mesh with no material, by
overriding enough of the render pipeline to be able to do so. This PR
fixes the issue by restoring the old behavior in which we extract meshes
even if they have no material.
* `texture_binding_array` broke because it doesn't implement
`AsBindGroup::unprepared_bind_group`. This was tricky to fix because
there's a very good reason why `texture_binding_array` doesn't implement
that method: there's no sensible way to do so with `wgpu`'s current
bindless API, due to its multiple levels of borrowed references. To fix
the example, I split `MaterialBindGroup` into
`MaterialBindlessBindGroup` and `MaterialNonBindlessBindGroup`, and
allow direct custom implementations of `AsBindGroup::as_bind_group` for
the latter type of bind groups. To opt in to the new behavior, return
the `AsBindGroupError::CreateBindGroupDirectly` error from your
`AsBindGroup::unprepared_bind_group` implementation, and Bevy will call
your custom `AsBindGroup::as_bind_group` method as before.
## Migration Guide
* Bevy will now unconditionally call
`AsBindGroup::unprepared_bind_group` for your materials, so you must no
longer panic in that function. Instead, return the new
`AsBindGroupError::CreateBindGroupDirectly` error, and Bevy will fall
back to calling `AsBindGroup::as_bind_group` as before.
# Objective
- Contributes to #15460
## Solution
- Added the following new features:
- `std` (default)
- `alloc`
- `encase` (default)
- `libm`
## Testing
- Added to `compile-check-no-std` CI command
## Notes
- `ColorCurve` requires `alloc` due to how the underlying `EvenCore`
type works.
- `Srgba::to_hex` requires `alloc` to return a `String`.
- This was otherwise a _very_ simple change
# Objective
- Allow bevy_sprite_picking backend to pass through transparent sections
of the sprite.
- Fixes#14929
## Solution
- After sprite picking detects the cursor is within a sprites rect,
check the pixel at that location on the texture and check that it meets
an optional transparency cutoff. Change originally created for
mod_picking on bevy 0.14
(https://github.com/aevyrie/bevy_mod_picking/pull/373)
## Testing
- Ran Sprite Picking example to check it was working both with
transparency enabled and disabled
- ModPicking version is currently in use in my own isometric game where
this has been an extremely noticeable issue
## Showcase
## Migration Guide
Sprite picking now ignores transparent regions (with an alpha value less
than or equal to 0.1). To configure this, modify the
`SpriteBackendSettings` resource.
---------
Co-authored-by: andriyDev <andriydzikh@gmail.com>
This commit moves the front end of the rendering pipeline to a retained
model when GPU preprocessing is in use (i.e. by default, except in
constrained environments). `RenderMeshInstance` and `MeshUniformData`
are stored from frame to frame and are updated only for the entities
that changed state. This was rather tricky and requires some careful
surgery to keep the data valid in the case of removals.
This patch is built on top of Bevy's change detection. Generally, this
worked, except that `ViewVisibility` isn't currently properly tracked.
Therefore, this commit adds proper change tracking for `ViewVisibility`.
Doing this required adding a new system that runs after all
`check_visibility` invocations, as no single `check_visibility`
invocation has enough global information to detect changes.
On the Bistro exterior scene, with all textures forced to opaque, this
patch improves steady-state `extract_meshes_for_gpu_building` from
93.8us to 34.5us and steady-state `collect_meshes_for_gpu_building` from
195.7us to 4.28us. Altogether this constitutes an improvement from 290us
to 38us, which is a 7.46x speedup.
This patch is only lightly tested and shouldn't land before 0.15 is
released anyway, so I'm releasing it as a draft.
# Objective
- Contributes to #15460
## Solution
- Added `std` feature (enabled by default)
## Testing
- CI
- `cargo check -p bevy_reflect --no-default-features --target
"x86_64-unknown-none"`
- UEFI demo application runs with this branch of `bevy_reflect`,
allowing `derive(Reflect)`
## Notes
- The [`spin`](https://crates.io/crates/spin) crate has been included to
provide `RwLock` and `Once` (as an alternative to `OnceLock`) when the
`std` feature is not enabled. Another alternative may be more desirable,
please provide feedback if you have a strong opinion here!
- Certain items (`Box`, `String`, `ToString`) provided by `alloc` have
been added to `__macro_exports` as a way to avoid `alloc` vs `std`
namespacing. I'm personally quite annoyed that we can't rely on `alloc`
as a crate name in `std` environments within macros. I'd love an
alternative to my approach here, but I suspect it's the least-bad
option.
- I would've liked to have an `alloc` feature (for allocation-free
`bevy_reflect`), unfortunately, `erased_serde` unconditionally requires
access to `Box`. Maybe one day we could design around this, but for now
it just means `bevy_reflect` requires `alloc`.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
On the web, it's common to attach observers to windows. As @viridia has
discovered, this can be quite a nice paradigm in bevy as well when
applied to observers. The changes here are intended to make this
possible.
+ Adds a new default picking back-end as part to the core picking plugin
(which can be disabled) that causes pointers on windows to treat the
window entity as the final hit, behind everything else. This means
clicking empty space now dispatches normal picking events to the window,
and is especially nice for drag-and-drop functionality.
+ Adds a new traversal type, specific to picking events, that causes
them to bubble up to the window entity after they reach the root of the
hierarchy.
## Solution
The window picking back-end is extremely simple, but the bubbling
changes are much more complex, since they require doing a different
traversal depending on the picking event.
To achieve this, `Traversal` has been made generic over an associated
sized data type `D`. Observer bounds have been changed such that
`Event::Traversal<D>` is required for `Trigger<D>`. A blanket
implementation has been added for `()` and `Parent` that preserves the
existing functionality. A new `PointerTraversal` traversal has been
implemented, with a blanket implementation for `Traversal<Pointer<E>>`.
It is still possible to use `Parent` as the traversal for any event,
because of the blanket implementation. It is now possible for users to
add other custom traversals, which read event data during traversal.
## Testing
I tested these changes locally on some picking UI prototypes I have been
playing with. I also tested them on the picking examples.
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
Running Github Actions on forks helps users to reduce the amount of CI
errors they get before submitting a PR. However, due to how workflows
are set up on the Bevy repository, this can result in errors occurring
for jobs that may not be related to their PR - in this case, uploading
screenshots to Pixel Eagle.
## Solution
The Pixel Eagle workflow is skipped if we aren't running on the Bevy
repository.
If we are on the Bevy repository, or the user has set it to run
elsewhere, we check if the `PIXELEAGLE_TOKEN` secret is set. If it
isn't, we skip uploading screenshots to Pixel Eagle.
* Artifacts still continue to generate, in case the user needs them.
* In the event that the Pixel Eagle workflow runs, but the
`PIXELEAGLE_TOKEN` secret isn't set, we generate a step summary that
notifies the user of why it was skipped.
https://github.com/LikeLakers2/bevy/actions/runs/12173329006/attempts/1#summary-33953502068
for an example.
## Testing
Lots. And lots. Of trying to get Github Actions to work with me.
# Objective
- Currently adding observers spawns an entity which implicitly flushes
the command queue, which can cause undefined behaviour if the
`WorldEntityMut` is used after this
- The reason `WorldEntityMut` attempted to (unsuccessfully) avoid
flushing commands until finished was that such commands may move or
despawn the entity being referenced, invalidating the cached location.
- With the introduction of hooks and observers, this isn't sensible
anymore as running the commands generated by hooks immediately is
required to maintain correct ordering of operations and to not expose
the world in an inconsistent state
- Objective is to make command flushing deterministic and fix the
related issues
- Fixes#16212
- Fixes#14621
- Fixes#16034
## Solution
- Allow `WorldEntityMut` to exist even when it refers to a despawned
entity by allowing `EntityLocation` to be marked invalid
- Add checks to all methods to panic if trying to access a despawned
entity
- Flush command queue after every operation that might trigger hooks or
observers
- Update entity location always after flushing command queue
## Testing
- Added test cases for currently broken behaviour
- Added test cases that flushes happen in all operations
- Added test cases to ensure hooks and commands are run exactly in
correct order when nested
---
Todo:
- [x] Write migration guide
- [x] Add tests that using `EntityWorldMut` on a despawned entity panics
- [x] Add tests that commands are flushed after every operation that is
supposed to flush them
- [x] Add tests that hooks, observers and their spawned commands are run
in the correct order when nested
---
## Migration Guide
Previously `EntityWorldMut` triggered command queue flushes in
unpredictable places, which could interfere with hooks and observers.
Now the command queue is flushed always immediately after any call in
`EntityWorldMut` that spawns or despawns an entity, or adds, removes or
replaces a component. This means hooks and observers will run their
commands in the correct order.
As a side effect, there is a possibility that a hook or observer could
despawn the entity that is being referred to by `EntityWorldMut`. This
could already currently happen if an observer was added while keeping an
`EntityWorldMut` referece and would cause unsound behaviour. If the
entity has been despawned, calling any methods which require the entity
location will panic. This matches the behaviour that `Commands` will
panic if called on an already despawned entity. In the extremely rare
case where taking a new `EntityWorldMut` reference or otherwise
restructuring the code so that this case does not happen is not
possible, there's a new `is_despawned` method that can be used to check
if the referred entity has been despawned.
# Objective
- Make it easier to understand how to profile things.
- Talk about CPU vs GPU work for graphics.
## Solution
- Add a section on GPU profiling and CPU vs GPU work.
- Rearrange some sections so Tracy is the first backend mentioned.
## Issues
I did this as a very quick fix to clear some things up, but the overall
guide still flows poorly and has too much extraneous info distracting
from the use case of "I just want to figure out why my app is slow",
where the advice should be "use tracy, and if GPU bottlenecked, do
this". Someone should do a full rewrite at some point.
I chose to omit talking about RenderDiagnosticsPlugin, but it's
definitely worth a mention as a way to easily check GPU + GPU time for
graphics work, although it's not hooked up in a lot of the engine, iirc
only shadows and the main passes. Again someone else should write about
it in the future.
Similarly it might've been useful to have a section describing how to
use NSight/RGP/IGA/Xcode for GPU profiling, as they're far from
intuitive tools.
# Objective
- Required by #16622 due to differing implementations of `System` by
`FunctionSystem` and `ExclusiveFunctionSystem`.
- Optimize the memory usage of instances of `apply_deferred` in system
schedules.
## Solution
By changing `apply_deferred` from being an ordinary system that ends up
as an `ExclusiveFunctionSystem`, and instead into a ZST struct that
implements `System` manually, we save ~320 bytes per instance of
`apply_deferred` in any schedule.
## Testing
- All current tests pass.
---
## Migration Guide
- If you were previously calling the special `apply_deferred` system via
`apply_deferred(world)`, don't.
# Objective
Outside of the `bevy_ecs` crate it's hard to implement `SystemParam`
trait on params that require access to the `World`, because `init_state`
expects user to extend access in `SystemMeta` and access-related fields
of `SystemMeta` are private.
## Solution
Expose those fields as a functions
# Objective
Define a framework for handling keyboard focus and bubbled keyboard
events, as discussed in #15374.
## Solution
Introduces a new crate, `bevy_input_focus`. This crate provides:
* A resource for tracking which entity has keyboard focus.
* Methods for getting and setting keyboard focus.
* Event definitions for triggering bubble-able keyboard input events to
the focused entity.
* A system for dispatching keyboard input events to the focused entity.
This crate does *not* provide any integration with UI widgets, or
provide functions for
tab navigation or gamepad-based focus navigation, as those are typically
application-specific.
## Testing
Most of the code has been copied from a different project, one that has
been well tested. However, most of what's in this module consists of
type definitions, with relatively small amounts of executable code. That
being said, I expect that there will be substantial bikeshedding on the
design, and I would prefer to hold off writing tests until after things
have settled.
I think that an example would be appropriate, however I'm waiting on a
few other pending changes to Bevy before doing so. In particular, I can
see a simple example with four buttons, with focus navigation between
them, and which can be triggered by the keyboard.
@alice-i-cecile
# Objective
- Fixes#16208
## Solution
- Added an associated type to `Component`, `Mutability`, which flags
whether a component is mutable, or immutable. If `Mutability= Mutable`,
the component is mutable. If `Mutability= Immutable`, the component is
immutable.
- Updated `derive_component` to default to mutable unless an
`#[component(immutable)]` attribute is added.
- Updated `ReflectComponent` to check if a component is mutable and, if
not, panic when attempting to mutate.
## Testing
- CI
- `immutable_components` example.
---
## Showcase
Users can now mark a component as `#[component(immutable)]` to prevent
safe mutation of a component while it is attached to an entity:
```rust
#[derive(Component)]
#[component(immutable)]
struct Foo {
// ...
}
```
This prevents creating an exclusive reference to the component while it
is attached to an entity. This is particularly powerful when combined
with component hooks, as you can now fully track a component's value,
ensuring whatever invariants you desire are upheld. Before this would be
done my making a component private, and manually creating a `QueryData`
implementation which only permitted read access.
<details>
<summary>Using immutable components as an index</summary>
```rust
/// This is an example of a component like [`Name`](bevy::prelude::Name), but immutable.
#[derive(Clone, Copy, PartialEq, Eq, PartialOrd, Ord, Hash, Component)]
#[component(
immutable,
on_insert = on_insert_name,
on_replace = on_replace_name,
)]
pub struct Name(pub &'static str);
/// This index allows for O(1) lookups of an [`Entity`] by its [`Name`].
#[derive(Resource, Default)]
struct NameIndex {
name_to_entity: HashMap<Name, Entity>,
}
impl NameIndex {
fn get_entity(&self, name: &'static str) -> Option<Entity> {
self.name_to_entity.get(&Name(name)).copied()
}
}
fn on_insert_name(mut world: DeferredWorld<'_>, entity: Entity, _component: ComponentId) {
let Some(&name) = world.entity(entity).get::<Name>() else {
unreachable!()
};
let Some(mut index) = world.get_resource_mut::<NameIndex>() else {
return;
};
index.name_to_entity.insert(name, entity);
}
fn on_replace_name(mut world: DeferredWorld<'_>, entity: Entity, _component: ComponentId) {
let Some(&name) = world.entity(entity).get::<Name>() else {
unreachable!()
};
let Some(mut index) = world.get_resource_mut::<NameIndex>() else {
return;
};
index.name_to_entity.remove(&name);
}
// Setup our name index
world.init_resource::<NameIndex>();
// Spawn some entities!
let alyssa = world.spawn(Name("Alyssa")).id();
let javier = world.spawn(Name("Javier")).id();
// Check our index
let index = world.resource::<NameIndex>();
assert_eq!(index.get_entity("Alyssa"), Some(alyssa));
assert_eq!(index.get_entity("Javier"), Some(javier));
// Changing the name of an entity is also fully capture by our index
world.entity_mut(javier).insert(Name("Steven"));
// Javier changed their name to Steven
let steven = javier;
// Check our index
let index = world.resource::<NameIndex>();
assert_eq!(index.get_entity("Javier"), None);
assert_eq!(index.get_entity("Steven"), Some(steven));
```
</details>
Additionally, users can use `Component<Mutability = ...>` in trait
bounds to enforce that a component _is_ mutable or _is_ immutable. When
using `Component` as a trait bound without specifying `Mutability`, any
component is applicable. However, methods which only work on mutable or
immutable components are unavailable, since the compiler must be
pessimistic about the type.
## Migration Guide
- When implementing `Component` manually, you must now provide a type
for `Mutability`. The type `Mutable` provides equivalent behaviour to
earlier versions of `Component`:
```rust
impl Component for Foo {
type Mutability = Mutable;
// ...
}
```
- When working with generic components, you may need to specify that
your generic parameter implements `Component<Mutability = Mutable>`
rather than `Component` if you require mutable access to said component.
- The entity entry API has had to have some changes made to minimise
friction when working with immutable components. Methods which
previously returned a `Mut<T>` will now typically return an
`OccupiedEntry<T>` instead, requiring you to add an `into_mut()` to get
the `Mut<T>` item again.
## Draft Release Notes
Components can now be made immutable while stored within the ECS.
Components are the fundamental unit of data within an ECS, and Bevy
provides a number of ways to work with them that align with Rust's rules
around ownership and borrowing. One part of this is hooks, which allow
for defining custom behavior at key points in a component's lifecycle,
such as addition and removal. However, there is currently no way to
respond to _mutation_ of a component using hooks. The reasons for this
are quite technical, but to summarize, their addition poses a
significant challenge to Bevy's core promises around performance.
Without mutation hooks, it's relatively trivial to modify a component in
such a way that breaks invariants it intends to uphold. For example, you
can use `core::mem::swap` to swap the components of two entities,
bypassing the insertion and removal hooks.
This means the only way to react to this modification is via change
detection in a system, which then begs the question of what happens
_between_ that alteration and the next run of that system?
Alternatively, you could make your component private to prevent
mutation, but now you need to provide commands and a custom `QueryData`
implementation to allow users to interact with your component at all.
Immutable components solve this problem by preventing the creation of an
exclusive reference to the component entirely. Without an exclusive
reference, the only way to modify an immutable component is via removal
or replacement, which is fully captured by component hooks. To make a
component immutable, simply add `#[component(immutable)]`:
```rust
#[derive(Component)]
#[component(immutable)]
struct Foo {
// ...
}
```
When implementing `Component` manually, there is an associated type
`Mutability` which controls this behavior:
```rust
impl Component for Foo {
type Mutability = Mutable;
// ...
}
```
Note that this means when working with generic components, you may need
to specify that a component is mutable to gain access to certain
methods:
```rust
// Before
fn bar<C: Component>() {
// ...
}
// After
fn bar<C: Component<Mutability = Mutable>>() {
// ...
}
```
With this new tool, creating index components, or caching data on an
entity should be more user friendly, allowing libraries to provide APIs
relying on components and hooks to uphold their invariants.
## Notes
- ~~I've done my best to implement this feature, but I'm not happy with
how reflection has turned out. If any reflection SMEs know a way to
improve this situation I'd greatly appreciate it.~~ There is an
outstanding issue around the fallibility of mutable methods on
`ReflectComponent`, but the DX is largely unchanged from `main` now.
- I've attempted to prevent all safe mutable access to a component that
does not implement `Component<Mutability = Mutable>`, but there may
still be some methods I have missed. Please indicate so and I will
address them, as they are bugs.
- Unsafe is an escape hatch I am _not_ attempting to prevent. Whatever
you do with unsafe is between you and your compiler.
- I am marking this PR as ready, but I suspect it will undergo fairly
major revisions based on SME feedback.
- I've marked this PR as _Uncontroversial_ based on the feature, not the
implementation.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: Nuutti Kotivuori <naked@iki.fi>
This commit allows the Bevy renderer to use the clustering
infrastructure for light probes (reflection probes and irradiance
volumes) on platforms where at least 3 storage buffers are available. On
such platforms (the vast majority), we stop performing brute-force
searches of light probes for each fragment and instead only search the
light probes with bounding spheres that intersect the current cluster.
This should dramatically improve scalability of irradiance volumes and
reflection probes.
The primary platform that doesn't support 3 storage buffers is WebGL 2,
and we continue using a brute-force search of light probes on that
platform, as the UBO that stores per-cluster indices is too small to fit
the light probe counts. Note, however, that that platform also doesn't
support bindless textures (indeed, it would be very odd for a platform
to support bindless textures but not SSBOs), so we only support one of
each type of light probe per drawcall there in the first place.
Consequently, this isn't a performance problem, as the search will only
have one light probe to consider. (In fact, clustering would probably
end up being a performance loss.)
Known potential improvements include:
1. We currently cull based on a conservative bounding sphere test and
not based on the oriented bounding box (OBB) of the light probe. This is
improvable, but in the interests of simplicity, I opted to keep the
bounding sphere test for now. The OBB improvement can be a follow-up.
2. This patch doesn't change the fact that each fragment only takes a
single light probe into account. Typical light probe implementations
detect the case in which multiple light probes cover the current
fragment and perform some sort of weighted blend between them. As the
light probe fetch function presently returns only a single light probe,
implementing that feature would require more code restructuring, so I
left it out for now. It can be added as a follow-up.
3. Light probe implementations typically have a falloff range. Although
this is a wanted feature in Bevy, this particular commit also doesn't
implement that feature, as it's out of scope.
4. This commit doesn't raise the maximum number of light probes past its
current value of 8 for each type. This should be addressed later, but
would possibly require more bindings on platforms with storage buffers,
which would increase this patch's complexity. Even without raising the
limit, this patch should constitute a significant performance
improvement for scenes that get anywhere close to this limit. In the
interest of keeping this patch small, I opted to leave raising the limit
to a follow-up.
## Changelog
### Changed
* Light probes (reflection probes and irradiance volumes) are now
clustered on most platforms, improving performance when many light
probes are present.
---------
Co-authored-by: Benjamin Brienen <Benjamin.Brienen@outlook.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Add a way to use the gizmo API in a retained manner, for increased
performance.
## Solution
- Move gizmo API from `Gizmos` to `GizmoBuffer`, ~ab~using `Deref` to
keep usage the same as before.
- Merge non-strip and strip variant of `LineGizmo` into one, storing the
data in a `GizmoBuffer` to have the same API for retained `LineGizmo`s.
### Review guide
- The meat of the changes are in `lib.rs`, `retained.rs`, `gizmos.rs`,
`pipeline_3d.rs` and `pipeline_2d.rs`
- The other files contain almost exclusively the churn from moving the
gizmo API from `Gizmos` to `GizmoBuffer`
## Testing
### Performance
Performance compared to the immediate mode API is from 65 to 80 times
better for static lines.
```
7900 XTX, 3700X
1707.9k lines/ms: gizmos_retained (21.3ms)
3488.5k lines/ms: gizmos_retained_continuous_polyline (31.3ms)
0.5k lines/ms: gizmos_retained_separate (97.7ms)
3054.9k lines/ms: bevy_polyline_retained_nan (16.8ms)
3596.3k lines/ms: bevy_polyline_retained_continuous_polyline (14.2ms)
0.6k lines/ms: bevy_polyline_retained_separate (78.9ms)
26.9k lines/ms: gizmos_immediate (14.9ms)
43.8k lines/ms: gizmos_immediate_continuous_polyline (18.3ms)
```
Looks like performance is good enough, being close to par with
`bevy_polyline`.
Benchmarks can be found here:
This branch:
https://github.com/tim-blackbird/line_racing/tree/retained-gizmos
Bevy 0.14: https://github.com/DGriffin91/line_racing
## Showcase
```rust
fn setup(
mut commands: Commands,
mut gizmo_assets: ResMut<Assets<GizmoAsset>>
) {
let mut gizmo = GizmoAsset::default();
// A sphere made out of one million lines!
gizmo
.sphere(default(), 1., CRIMSON)
.resolution(1_000_000 / 3);
commands.spawn(Gizmo {
handle: gizmo_assets.add(gizmo),
..default()
});
}
```
## Follow-up work
- Port over to the retained rendering world proper
- Calculate visibility and cull `Gizmo`s
# Objective
BrpQueryRow doesn't serialize `has` field if it is empty. That is okay
until you try to deserialize it after. Then it will fail to deserialize
due to missing field.
## Solution
Serde support using default value when field is missing, this PR adds
that.
# Objective
Fix a [Blenvy](https://github.com/kaosat-dev/Blenvy) crash due to a
missing type registration for `TextEntity` (as the type is used by
`ComputedTextBlock` but wasn't itself registered.)
## Solution
- Added the missing type registration
## Testing
- N/A
Currently, the prepass has no support for visibility ranges, so
artifacts appear when using dithering visibility ranges in conjunction
with a prepass. This patch fixes that problem.
Note that this patch changes the prepass to use sparse bind group
indices instead of sequential ones. I figured this is cleaner, because
it allows for greater sharing of WGSL code between the forward pipeline
and the prepass pipeline.
The `visibility_range` example has been updated to allow the prepass to
be toggled on and off.
# Objective
- Contributes to #15460
## Solution
- Removed `petgraph` as a dependency from the `bevy_ecs` crate.
- Replaced `TarjanScc` and `GraphMap` with specialised in-tree
alternatives.
## Testing
- Ran CI locally.
- Added new unit tests to check ordering invariants.
- Confirmed `petgraph` is no longer present in `cargo tree -p bevy_ecs`
## Migration Guide
The `Dag::graph` method no longer returns a `petgraph` `DiGraph` and
instead returns the new `DiGraph` type within `bevy_ecs`. Edge and node
iteration methods are provided so conversion to the `petgraph` type
should be trivial if required.
## Notes
- `indexmap` was already in the dependency graph for `bevy_ecs`, so its
inclusion here makes no difference to compilation time for Bevy.
- The implementation for `Graph` is heavily inspired from the `petgraph`
original, with specialisations added to simplify and improve the type.
- `petgraph` does have public plans for `no_std` support, however there
is no timeframe on if or when that functionality will be available.
Moving to an in-house solution in the interim allows Bevy to continue
developing its `no_std` offerings and further explore alternate graphing
options.
---------
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
Co-authored-by: vero <11307157+atlv24@users.noreply.github.com>
# Objective
- dont depend on wgpu if we dont have to
## Solution
- works towards this, but doesnt fully accomplish it. bevy_mesh depends
on bevy_image
## Testing
- 3d_scene runs
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
- Fixes#16594
## Solution
- `StateTransitionSteps` was made public
## Testing
- _Did you test these changes? If so, how?_
I am now able to import it and use it.
---
## Showcase
- Users can now write their own state scoped resources
```rust
fn init_state_scoped_resource<R: Resource + FromWorld>(
&mut self,
state: impl States,
) -> &mut Self {
use bevy::state::state::StateTransitionSteps; // this PR in action
self.add_systems(
StateTransition,
(
clear_state_scoped_resource_impl::<_, R>(state.clone())
.in_set(StateTransitionSteps::ExitSchedules), // and here
init_state_scoped_resource_impl::<_, R>(state)
.in_set(StateTransitionSteps::EnterSchedules), // here too
),
);
self
}
```
# Objective
Make documentation of a component's required components more visible by
moving it to the type's docs
## Solution
Change `#[require]` from a derive macro helper to an attribute macro.
Disadvantages:
- this silences any unused code warnings on the component, as it is used
by the macro!
- need to import `require` if not using the ecs prelude (I have not
included this in the migration guilde as Rust tooling already suggests
the fix)
---
## Showcase
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
# Objective
The `UiBoxShadowSamples` resource should be renamed to
`BoxShadowSamples` so it matches the `BoxShadow` component.
## Migration Guide
`UiBoxShadowSamples` has been renamed to `BoxShadowSamples`
# Objective
`flush_and_reserve_invalid_assuming_no_entities` was made for the old
rendering world (which was reset every frame) and is usused since the
0.15 retained rendering world, but wasn't removed yet. It is pub, but is
undocumented apart from the safety comment.
## Solution
Remove `flush_and_reserve_invalid_assuming_no_entities` and the safety
invariants this method required for `EntityMeta`, `EntityLocation`,
`TableId` and `TableRow`. This reduces the amount of unsafe code &
safety invariants and makes #16047 easier.
## Alternatives
- Document `flush_and_reserve_invalid_assuming_no_entities` and keep it
unchanged
- Document `flush_and_reserve_invalid_assuming_no_entities` and change
it to be based on `EntityMeta::INVALID`
## Migration Guide
- exchange `Entities::flush_and_reserve_invalid_assuming_no_entities`
for `reserve` and `flush_as_invalid` and notify us if that's
insufficient
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
Remove the `min` and `max` fields from `LayoutContext`.
It doesn't seem useful to cache these values, it's simpler just to call
`min_element` and `max_element` on the `physical_size`
field.
## Migration Guide
The `min` and `max` fields have been removed from `LayoutContext`. To
retrieve these values call `min_element` and `max_element` on
`LayoutContent::physical_size` instead.
# Objective
This was always a bit weird; `IntoIterator` is considered more idiomatic
in Rust.
The reason these used `Into<Vec<..>>` in the first place was (to my
knowledge) because of concerns that passing an already-owned vector
would cause a redundant allocation if the iterator API was used instead.
However, I have looked at simple examples for this scenario and the
generated assembly is identical (i.e. `into_iter().collect()` is
effectively converted to a no-op).
## Solution
As described in the title.
## Testing
It compiles. Ran existing tests.
## Migration Guide
The cubic splines API now uses `IntoIterator` in places where it used
`Into<Vec<..>>`. For most users, this will have little to no effect (it
is largely more permissive). However, in case you were using some
unusual input type that implements `Into<Vec<..>>` without implementing
`IntoIterator`, you can migrate by converting the input to a `Vec<..>`
before passing it into the interface.
# Objective
- Allow bevy_sprite_picking backend to pass through transparent sections
of the sprite.
- Fixes#14929
## Solution
- After sprite picking detects the cursor is within a sprites rect,
check the pixel at that location on the texture and check that it meets
an optional transparency cutoff. Change originally created for
mod_picking on bevy 0.14
(https://github.com/aevyrie/bevy_mod_picking/pull/373)
## Testing
- Ran Sprite Picking example to check it was working both with
transparency enabled and disabled
- ModPicking version is currently in use in my own isometric game where
this has been an extremely noticeable issue
## Showcase
## Migration Guide
Sprite picking now ignores transparent regions (with an alpha value less
than or equal to 0.1). To configure this, modify the
`SpriteBackendSettings` resource.
---------
Co-authored-by: andriyDev <andriydzikh@gmail.com>
This patch adds the infrastructure necessary for Bevy to support
*bindless resources*, by adding a new `#[bindless]` attribute to
`AsBindGroup`.
Classically, only a single texture (or sampler, or buffer) can be
attached to each shader binding. This means that switching materials
requires breaking a batch and issuing a new drawcall, even if the mesh
is otherwise identical. This adds significant overhead not only in the
driver but also in `wgpu`, as switching bind groups increases the amount
of validation work that `wgpu` must do.
*Bindless resources* are the typical solution to this problem. Instead
of switching bindings between each texture, the renderer instead
supplies a large *array* of all textures in the scene up front, and the
material contains an index into that array. This pattern is repeated for
buffers and samplers as well. The renderer now no longer needs to switch
binding descriptor sets while drawing the scene.
Unfortunately, as things currently stand, this approach won't quite work
for Bevy. Two aspects of `wgpu` conspire to make this ideal approach
unacceptably slow:
1. In the DX12 backend, all binding arrays (bindless resources) must
have a constant size declared in the shader, and all textures in an
array must be bound to actual textures. Changing the size requires a
recompile.
2. Changing even one texture incurs revalidation of all textures, a
process that takes time that's linear in the total size of the binding
array.
This means that declaring a large array of textures big enough to
encompass the entire scene is presently unacceptably slow. For example,
if you declare 4096 textures, then `wgpu` will have to revalidate all
4096 textures if even a single one changes. This process can take
multiple frames.
To work around this problem, this PR groups bindless resources into
small *slabs* and maintains a free list for each. The size of each slab
for the bindless arrays associated with a material is specified via the
`#[bindless(N)]` attribute. For instance, consider the following
declaration:
```rust
#[derive(AsBindGroup)]
#[bindless(16)]
struct MyMaterial {
#[buffer(0)]
color: Vec4,
#[texture(1)]
#[sampler(2)]
diffuse: Handle<Image>,
}
```
The `#[bindless(N)]` attribute specifies that, if bindless arrays are
supported on the current platform, each resource becomes a binding array
of N instances of that resource. So, for `MyMaterial` above, the `color`
attribute is exposed to the shader as `binding_array<vec4<f32>, 16>`,
the `diffuse` texture is exposed to the shader as
`binding_array<texture_2d<f32>, 16>`, and the `diffuse` sampler is
exposed to the shader as `binding_array<sampler, 16>`. Inside the
material's vertex and fragment shaders, the applicable index is
available via the `material_bind_group_slot` field of the `Mesh`
structure. So, for instance, you can access the current color like so:
```wgsl
// `uniform` binding arrays are a non-sequitur, so `uniform` is automatically promoted
// to `storage` in bindless mode.
@group(2) @binding(0) var<storage> material_color: binding_array<Color, 4>;
...
@fragment
fn fragment(in: VertexOutput) -> @location(0) vec4<f32> {
let color = material_color[mesh[in.instance_index].material_bind_group_slot];
...
}
```
Note that portable shader code can't guarantee that the current platform
supports bindless textures. Indeed, bindless mode is only available in
Vulkan and DX12. The `BINDLESS` shader definition is available for your
use to determine whether you're on a bindless platform or not. Thus a
portable version of the shader above would look like:
```wgsl
#ifdef BINDLESS
@group(2) @binding(0) var<storage> material_color: binding_array<Color, 4>;
#else // BINDLESS
@group(2) @binding(0) var<uniform> material_color: Color;
#endif // BINDLESS
...
@fragment
fn fragment(in: VertexOutput) -> @location(0) vec4<f32> {
#ifdef BINDLESS
let color = material_color[mesh[in.instance_index].material_bind_group_slot];
#else // BINDLESS
let color = material_color;
#endif // BINDLESS
...
}
```
Importantly, this PR *doesn't* update `StandardMaterial` to be bindless.
So, for example, `scene_viewer` will currently not run any faster. I
intend to update `StandardMaterial` to use bindless mode in a follow-up
patch.
A new example, `shaders/shader_material_bindless`, has been added to
demonstrate how to use this new feature.
Here's a Tracy profile of `submit_graph_commands` of this patch and an
additional patch (not submitted yet) that makes `StandardMaterial` use
bindless. Red is those patches; yellow is `main`. The scene was Bistro
Exterior with a hack that forces all textures to opaque. You can see a
1.47x mean speedup.
## Migration Guide
* `RenderAssets::prepare_asset` now takes an `AssetId` parameter.
* Bin keys now have Bevy-specific material bind group indices instead of
`wgpu` material bind group IDs, as part of the bindless change. Use the
new `MaterialBindGroupAllocator` to map from bind group index to bind
group ID.
# Objective
Fixes#15941
## Solution
Created https://crates.io/crates/variadics_please and moved the code
there; updating references
`bevy_utils/macros` is deleted.
## Testing
cargo check
## Migration Guide
Use `variadics_please::{all_tuples, all_tuples_with_size}` instead of
`bevy::utils::{all_tuples, all_tuples_with_size}`.
## Objective
Fixes#1515
This PR implements a flexible entity cloning system. The primary use
case for it is to clone dynamically-generated entities.
Example:
```rs
#[derive(Component, Clone)]
pub struct Projectile;
#[derive(Component, Clone)]
pub struct Damage {
value: f32,
}
fn player_input(
mut commands: Commands,
projectiles: Query<Entity, With<Projectile>>,
input: Res<ButtonInput<KeyCode>>,
) {
// Fire a projectile
if input.just_pressed(KeyCode::KeyF) {
commands.spawn((Projectile, Damage { value: 10.0 }));
}
// Triplicate all active projectiles
if input.just_pressed(KeyCode::KeyT) {
for projectile in projectiles.iter() {
// To triplicate a projectile we need to create 2 more clones
for _ in 0..2{
commands.clone_entity(projectile)
}
}
}
}
```
## Solution
### Commands
Add a `clone_entity` command to create a clone of an entity with all
components that can be cloned. Components that can't be cloned will be
ignored.
```rs
commands.clone_entity(entity)
```
If there is a need to configure the cloning process (like set to clone
recursively), there is a second command:
```rs
commands.clone_entity_with(entity, |builder| {
builder.recursive(true)
});
```
Both of these commands return `EntityCommands` of the cloned entity, so
the copy can be modified afterwards.
### Builder
All these commands use `EntityCloneBuilder` internally. If there is a
need to clone an entity using `World` instead, it is also possible:
```rs
let entity = world.spawn(Component).id();
let entity_clone = world.spawn_empty().id();
EntityCloneBuilder::new(&mut world).clone_entity(entity, entity_clone);
```
Builder has methods to `allow` or `deny` certain components during
cloning if required and can be extended by implementing traits on it.
This PR includes two `EntityCloneBuilder` extensions:
`CloneEntityWithObserversExt` to configure adding cloned entity to
observers of the original entity, and `CloneEntityRecursiveExt` to
configure cloning an entity recursively.
### Clone implementations
By default, all components that implement either `Clone` or `Reflect`
will be cloned (with `Clone`-based implementation preferred in case
component implements both).
This can be overriden on a per-component basis:
```rs
impl Component for SomeComponent {
const STORAGE_TYPE: StorageType = StorageType::Table;
fn get_component_clone_handler() -> ComponentCloneHandler {
// Don't clone this component
ComponentCloneHandler::Ignore
}
}
```
### `ComponentCloneHandlers`
Clone implementation specified in `get_component_clone_handler` will get
registered in `ComponentCloneHandlers` (stored in
`bevy_ecs::component::Components`) at component registration time.
The clone handler implementation provided by a component can be
overriden after registration like so:
```rs
let component_id = world.components().component_id::<Component>().unwrap()
world.get_component_clone_handlers_mut()
.set_component_handler(component_id, ComponentCloneHandler::Custom(component_clone_custom))
```
The default clone handler for all components that do not explicitly
define one (or don't derive `Component`) is
`component_clone_via_reflect` if `bevy_reflect` feature is enabled, and
`component_clone_ignore` (noop) otherwise.
Default handler can be overriden using
`ComponentCloneHandlers::set_default_handler`
### Handlers
Component clone handlers can be used to modify component cloning
behavior. The general signature for a handler that can be used in
`ComponentCloneHandler::Custom` is as follows:
```rs
pub fn component_clone_custom(
world: &mut DeferredWorld,
entity_cloner: &EntityCloner,
) {
// implementation
}
```
The `EntityCloner` implementation (used internally by
`EntityCloneBuilder`) assumes that after calling this custom handler,
the `target` entity has the desired version of the component from the
`source` entity.
### Builder handler overrides
Besides component-defined and world-overriden handlers,
`EntityCloneBuilder` also has a way to override handlers locally. It is
mainly used to allow configuration methods like `recursive` and
`add_observers`.
```rs
// From observer clone handler implementation
impl CloneEntityWithObserversExt for EntityCloneBuilder<'_> {
fn add_observers(&mut self, add_observers: bool) -> &mut Self {
if add_observers {
self.override_component_clone_handler::<ObservedBy>(ComponentCloneHandler::Custom(
component_clone_observed_by,
))
} else {
self.remove_component_clone_handler_override::<ObservedBy>()
}
}
}
```
## Testing
Includes some basic functionality tests and doctests.
Performance-wise this feature is the same as calling `clone` followed by
`insert` for every entity component. There is also some inherent
overhead due to every component clone handler having to access component
data through `World`, but this can be reduced without breaking current
public API in a later PR.
# Objective
- Fixes#16078
## Solution
- Rename things to clarify that we _want_ unclipped depth for
directional light shadow views, and need some way of disabling the GPU's
builtin depth clipping
- Use DEPTH_CLIP_CONTROL instead of the fragment shader emulation on
supported platforms
- Pass only the clip position depth instead of the whole clip position
between vertex->fragment shader (no idea if this helps performance or
not, compiler might optimize it anyways)
- Meshlets
- HW raster always uses DEPTH_CLIP_CONTROL since it targets a more
limited set of platforms
- SW raster was not handling DEPTH_CLAMP_ORTHO correctly, it ended up
pretty much doing nothing.
- This PR made me realize that SW raster technically should have depth
clipping for all views that are not directional light shadows, but I
decided not to bother writing it. I'm not sure that it ever matters in
practice. If proven otherwise, I can add it.
## Testing
- Did you test these changes? If so, how?
- Lighting example. Both opaque (no fragment shader) and alpha masked
geometry (fragment shader emulation) are working with
depth_clip_control, and both work when it's turned off. Also tested
meshlet example.
- Are there any parts that need more testing?
- Performance. I can't figure out a good test scene.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Toggle depth_clip_control_supported in prepass/mod.rs line 323 to turn
this PR on or off.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- Native
---
## Migration Guide
- `MeshPipelineKey::DEPTH_CLAMP_ORTHO` is now
`MeshPipelineKey::UNCLIPPED_DEPTH_ORTHO`
- The `DEPTH_CLAMP_ORTHO` shaderdef has been renamed to
`UNCLIPPED_DEPTH_ORTHO_EMULATION`
- `clip_position_unclamped: vec4<f32>` is now `unclipped_depth: f32`
# Objective
Avoid a premature normalize operation and get better smooth normals for
it.
## Inspiration
@IceSentry suggested `face_normal()` could have its normalize removed
based on [this article](https://iquilezles.org/articles/normals/) in PR
#16039.
## Solution
I did not want to change `face_normal()` to return a vector that's not
normalized. The name "normal" implies it'll be normalized. Instead I
added the `face_area_normal()` function, whose result is not normalized.
Its magnitude is equal two times the triangle's area. I've noted why
this is the case in its doc comment.
I changed `compute_smooth_normals()` from computing normals from
adjacent faces with equal weight to use the area of the faces as a
weight. This has the benefit of being cheaper computationally and
hopefully produces better normals.
The `compute_flat_normals()` is unchanged and still uses
`face_normal()`.
## Testing
One test was added which shows the bigger triangle having an effect on
the normal, but the previous test that uses the same size triangles is
unchanged.
**WARNING:** No visual test has been done yet. No example exists that
demonstrates the compute_smooth_normals(). Perhaps there's a good model
to demonstrate what the differences are. I would love to have some input
on this.
I'd suggest @IceSentry and @stepancheg to review this PR.
## Further Considerations
It's possible weighting normals by their area is not definitely better
than unweighted. It's possible there may be aesthetic reasons to prefer
one over the other. In such a case, we could offer two variants:
weighted or unweighted. Or we could offer another function perhaps like
this: `compute_smooth_normals_with_weights(|normal, area| 1.0)` which
would restore the original unweighted sum of normals.
---
## Showcase
Smooth normal calculation now weights adjacent face normals by their
area.
## Migration Guide
# Objective
- Exposes raw winit events making Bevy even more modular and powerful
for custom plugin developers (e.g. a custom render plugin).
XRef: https://github.com/bevyengine/bevy/issues/5977
It doesn't quite close the issue as sending events is not supported (or
not very useful to be precise). I would think that supporting that
requires some extra considerations by someone a bit more familiar with
the `bevy_winit` crate. That said, this PR could be a nice step forward.
## Solution
Emit `RawWinitWindowEvent` objects for each received event.
## Testing
I verified that the events are emitted using a basic test app. I don't
think it makes sense to solidify this behavior in one of the examples.
---
## Showcase
My example usage for a custom `egui_winit` integration:
```rust
for ev in winit_events.read() {
if ev.window_id == window.id {
let _ = egui_winit.on_window_event(&window, &ev.event);
}
}
```
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- Keep Taffy version up to date
Taffy 0.6 doesn't include a huge amount relevant to Bevy. But it does:
- Add the `box_sizing` style
- Expose the computed `margin` in layout
- Traitifies the `Style` struct, which opens up the possibility of using
Bevy's `Style` struct directly (although Bevy currently does some style
resolution at conversion time which would no longer be cached if it was
used directly).
- Have a few bug fixes in the layout algorithms
## Solution
- Upgrade Taffy to `0.6.0`
## Testing
- I've run the `grid` example. All looks good.
- More testing is probably warranted. We have had regressions from Taffy
upgrades before
- Having said that, most of the algorithm changes this cycle were driven
by fixing WPT tests run through the new Servo integration. So they're
possibly less likely than usual to cause regressions.
## Breaking changes
The only "breaking" change is adding a field to `Style`. Probably
doesn't bear mentioning?
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Contributes to #15460
## Solution
- Added two new features, `std` (default) and `alloc`, gating `std` and
`alloc` behind them respectively.
- Added missing `f32` functions to `std_ops` as required. These `f32`
methods have been added to the `clippy.toml` deny list to aid in
`no_std` development.
## Testing
- CI
- `cargo clippy -p bevy_math --no-default-features --features libm
--target "x86_64-unknown-none"`
- `cargo test -p bevy_math --no-default-features --features libm`
- `cargo test -p bevy_math --no-default-features --features "libm,
alloc"`
- `cargo test -p bevy_math --no-default-features --features "libm,
alloc, std"`
- `cargo test -p bevy_math --no-default-features --features "std"`
## Notes
The following items require the `alloc` feature to be enabled:
- `CubicBSpline`
- `CubicBezier`
- `CubicCardinalSpline`
- `CubicCurve`
- `CubicGenerator`
- `CubicHermite`
- `CubicNurbs`
- `CyclicCubicGenerator`
- `RationalCurve`
- `RationalGenerator`
- `BoxedPolygon`
- `BoxedPolyline2d`
- `BoxedPolyline3d`
- `SampleCurve`
- `SampleAutoCurve`
- `UnevenSampleCurve`
- `UnevenSampleAutoCurve`
- `EvenCore`
- `UnevenCore`
- `ChunkedUnevenCore`
This requirement could be relaxed in certain cases, but I had erred on
the side of gating rather than modifying. Since `no_std` is a new set of
platforms we are adding support to, and the `alloc` feature is enabled
by default, this is not a breaking change.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
Co-authored-by: Matty <2975848+mweatherley@users.noreply.github.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
