Currently, volumetric fog is global and affects the entire scene
uniformly. This is inadequate for many use cases, such as local smoke
effects. To address this problem, this commit introduces *fog volumes*,
which are axis-aligned bounding boxes (AABBs) that specify fog
parameters inside their boundaries. Such volumes can also specify a
*density texture*, a 3D texture of voxels that specifies the density of
the fog at each point.
To create a fog volume, add a `FogVolume` component to an entity (which
is included in the new `FogVolumeBundle` convenience bundle). Like light
probes, a fog volume is conceptually a 1×1×1 cube centered on the
origin; a transform can be used to position and resize this region. Many
of the fields on the existing `VolumetricFogSettings` have migrated to
the new `FogVolume` component. `VolumetricFogSettings` on a camera is
still needed to enable volumetric fog. However, by itself
`VolumetricFogSettings` is no longer sufficient to enable volumetric
fog; a `FogVolume` must be present. Applications that wish to retain the
old global fog behavior can simply surround the scene with a large fog
volume.
By way of implementation, this commit converts the volumetric fog shader
from a full-screen shader to one applied to a mesh. The strategy is
different depending on whether the camera is inside or outside the fog
volume. If the camera is inside the fog volume, the mesh is simply a
plane scaled to the viewport, effectively falling back to a full-screen
pass. If the camera is outside the fog volume, the mesh is a cube
transformed to coincide with the boundaries of the fog volume's AABB.
Importantly, in the latter case, only the front faces of the cuboid are
rendered. Instead of treating the boundaries of the fog as a sphere
centered on the camera position, as we did prior to this patch, we
raytrace the far planes of the AABB to determine the portion of each ray
contained within the fog volume. We then raymarch in shadow map space as
usual. If a density texture is present, we modulate the fixed density
value with the trilinearly-interpolated value from that texture.
Furthermore, this patch introduces optional jitter to fog volumes,
intended for use with TAA. This modifies the position of the ray from
frame to frame using interleaved gradient noise, in order to reduce
aliasing artifacts. Many implementations of volumetric fog in games use
this technique. Note that this patch makes no attempt to write a motion
vector; this is because when a view ray intersects multiple voxels
there's no single direction of motion. Consequently, fog volumes can
have ghosting artifacts, but because fog is "ghostly" by its nature,
these artifacts are less objectionable than they would be for opaque
objects.
A new example, `fog_volumes`, has been added. It demonstrates a single
fog volume containing a voxelized representation of the Stanford bunny.
The existing `volumetric_fog` example has been updated to use the new
local volumetrics API.
## Changelog
### Added
* Local `FogVolume`s are now supported, to localize fog to specific
regions. They can optionally have 3D density voxel textures for precise
control over the distribution of the fog.
### Changed
* `VolumetricFogSettings` on a camera no longer enables volumetric fog;
instead, it simply enables the processing of `FogVolume`s within the
scene.
## Migration Guide
* A `FogVolume` is now necessary in order to enable volumetric fog, in
addition to `VolumetricFogSettings` on the camera. Existing uses of
volumetric fog can be migrated by placing a large `FogVolume`
surrounding the scene.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
Right not bevy's task pool abstraction is kind of useless on wasm, since
it returns a `FakeTask` which can't be interacted with. This is only
good for fire-and-forget it tasks, and isn't even that useful since it's
just a thin wrapper around `wasm-bindgen-futures::spawn_local`
## Solution
Add a simple `Task<T>` handler type to wasm targets that allow waiting
for a task's output or periodically checking for its completion. This PR
aims to give the wasm version of these tasks feature parity with the
native, multi-threaded version of the task
## Testing
- Did you test these changes? *Not yet*
---------
Co-authored-by: Periwink <charlesbour@gmail.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
- Actually use the value assigned to `d_xz`, like in [the original SMAA
implementation](https://github.com/iryoku/smaa/blob/master/SMAA.hlsl#L960).
This not already being the case was likely a mistake when converting
from HLSL to WGSL
## Solution
- Use `d_xz.x` and `d_xz.y` instead of `d.x` and `d.z`
## Testing
- Quickly tested on Windows 11, `x86_64-pc-windows-gnu` `1.79.0` with
the latest NVIDIA drivers. App runs with SMAA enabled and everything
seems to work as intended
- I didn't observe any major visual difference between this and the
previous version, though this should be more correct as it matches the
original SMAA implementation
# Objective
- Allow queuing insertion of dynamic components to an existing entity
## Solution
- Add `insert_by_id<T: Send + 'static>(commands: &mut EntityCommands,
component_id: ComponentId, value: T)` and the `try_insert_by_id`
counterpart
## Testing
TODO
- Did you test these changes? If so, how?
- Are there any parts that need more testing?
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
## Alternatives
This PR is not feature-complete for dynamic components. In particular,
it
- only supports one component
- only supports adding components with a known, sized type
These were not implemented because doing so would require enhancing
`CommandQueue` to support pushing unsized commands (or equivalently,
pushing commands with a buffer of data). Even so, the cost would not be
transparent compared to the implementation in this PR, which simply
captures the `ComponentId` and `value: T` into the command closure and
can be easily memcpy'ed to the stack during execution. For example, to
efficiently pass `&[ComponentId]` from the caller to the world, we would
need to:
1. Update `CommandQueue.bytes` from `Vec<MaybeUninit<u8>>` to
`Vec<MaybeUninit<usize>>` so that it has the same alignment as
`ComponentId` (which probably needs to be made `#[repr(transparent)]`
too)
2. After pushing the Command metadata, push padding bytes until the vec
len is a multiple of `size_of::<usize>()`
3. Store `components.len()` in the data
4. memcpy the user-provided `&[ComponentId]` to `CommandQueue.bytes`
5. During execution, round up the data pointer behind the `Command` to
skip padding, then cast the pointer and consume it as a `&[ComponentId]`
The effort here seems unnecessarily high, unless someone else has such a
requirement. At least for the use case I am working with, I only need a
single known type, and if we need multiple components, we could always
enhance this function to accept a `[ComponentId; N]`.
I recommend enhancing the `Bundle` API in the long term to achieve this
goal more elegantly.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Felix Rath <felixm.rath@gmail.com>
# Objective
The borders example is separate from the rounded borders example. If you
find the borders example, you may miss the rounded borders example.
## Solution
Merge the examples in a basic way, since there is enough room to show
all options at the same time.
I also considered renaming the borders and rounded borders examples so
that they would be located next to each other in repo and UI, but it
felt like having a singular example was better.
## Testing
```
cargo run --example borders
```
---
## Showcase
The merged example looks like this:
# Objective
- Extracted from #14298.
- `bevy_window` has an empty `default` feature that does not enable
anything, which is equivalent to not having any default features.
## Solution
- Remove it :)
- This is technically a breaking change, but specifying `features =
["default"]` manually in `Cargo.toml` is highly discouraged, so the
impact is low.
---
## Migration Guide
`bevy_window` had an empty default feature flag that did not do
anything, so it was removed. You may have to remove any references to it
if you specified it manually.
```toml
# 0.14
[dependencies]
bevy_window = { version = "0.14", default-features = false, features = ["default"] }
# 0.15
[dependencies]
bevy_window = { version = "0.15", default-features = false }
```
# Objective
The github action summary titles every compile test group as
`compile_fail_utils`.
## Solution
Manually specify group names for compile fail tests.
## Testing
- Wait for compile fail tests to run.
- Observe the generated summary.
# Objective
`TriggerTargets` can not be borrowed for use in `World::trigger_targets`
## Solution
Drop `'static` bound on `TriggerEvent`, keep it for `Command` impl.
## Testing
n/a
# Objective
`Annulus` is missing `Bounded2d` even though the implementation is
trivial.
## Solution
Implement `Bounded2d` for `Annulus`.
## Testing
There is a basic test to verify that the produced bounding volumes are
correct.
# Objective
Fixes#14308.
#14269 added the `Isometry2d` and `Isometry3d` types, but they don't
have usage examples or much documentation on what the types actually
represent or what they may be useful for.
In addition, their module is public and the types are not re-exported at
the crate root, unlike all the other core math types like Glam's types,
direction types, and `Rot2`.
## Solution
Improve the documentation of `Isometry2d` and `Isometry3d`, explaining
what they represent and can be useful for, along with doc examples on
common high-level usage. I also made the way the types are exported
consistent with other core math types.
This does add some duplication, but I personally think having good docs
for this is valuable, and people are also less likely to look at the
module-level docs than type-level docs.
# Objective
The docs on SpatialBundle's pub const constructors mention that one is
"visible" when it's actually inherited, which afaik means it's
conditional on its parent's visibility.
I feel it's more correct like this.
_Also I'm seeing how making a PR from github.dev works hopefully nothing
weird happens_
# Objective
- [`flag-frenzy`](https://github.com/TheBevyFlock/flag-frenzy) found an
issue where `bevy_window` would fail to build when its `serialize`
feature is enabled.
- See
[here](https://github.com/TheBevyFlock/flag-frenzy/actions/runs/9924187577/job/27415224405)
for the specific log.
## Solution
- Turns out it was failing because the `bevy_ecs/serialize` feature was
not enabled. This error can be fixed by adding the flag as a dependency.
## Testing
```bash
cargo check -p bevy_window -F serialize
# Or if you're very cool...
flag-frenzy --manifest-path path/to/bevy/Cargo.toml --config config -p bevy_window
```
The existing doc comment for GlobalTransform::transform_point is
unclear, or, arguably, incorrect.
https://github.com/bevyengine/bevy/discussions/8501 also mentions this.
Additionally, a user reading the doc for transform_point might be
looking for one of the three other transforms that I mentioned in this
doc comment.
---------
Co-authored-by: Mason Kramer <mason@masonkramer.net>
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
```rust
// Currently:
builder.add_after::<FooPlugin, _>(BarPlugin);
// After this PR:
builder.add_after::<FooPlugin>(BarPlugin);
```
This removes some weirdness and better parallels the rest of the
`PluginGroupBuilder` API.
## Solution
Define a helper method `type_id_of_val` to use in `.add_before` and
`.add_after` instead of `TypeId::of::<T>` (which requires the plugin
type to be nameable, preventing `impl Plugin` from being used).
## Testing
Ran `cargo run -p ci lints` successfully.
## Migration Guide
Removed second generic from `PluginGroupBuilder` methods: `add_before`
and `add_after`.
```rust
// Before:
DefaultPlugins
.build()
.add_before::<WindowPlugin, _>(FooPlugin)
.add_after::<WindowPlugin, _>(BarPlugin)
// After:
DefaultPlugins
.build()
.add_before::<WindowPlugin>(FooPlugin)
.add_after::<WindowPlugin>(BarPlugin)
```
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14036
## Solution
- Add a view space transformation for the skybox
## Testing
- I have tested the newly added `transform` field using the `skybox`
example.
```
diff --git a/examples/3d/skybox.rs b/examples/3d/skybox.rs
index beaf5b268..d16cbe988 100644
--- a/examples/3d/skybox.rs
+++ b/examples/3d/skybox.rs
@@ -81,6 +81,7 @@ fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
Skybox {
image: skybox_handle.clone(),
brightness: 1000.0,
+ rotation: Quat::from_rotation_x(PI * -0.5),
},
));
```
<img width="1280" alt="image"
src="https://github.com/bevyengine/bevy/assets/6300263/1230a608-58ea-492d-a811-90c54c3b43ef">
## Migration Guide
- Since we have added a new filed to the Skybox struct, users will need
to include `..Default::default()` or some rotation value in their
initialization code.
# Objective
- Fixes overflow when calling `RenderLayers::iter_layers` on layers of
the form `k * 64 - 1`
- Causes a panic in debug mode, and an infinite iterator in release mode
## Solution
- Use `u64::checked_shr` instead of `>>=`
## Testing
- Added a test case for this: `render_layer_iter_no_overflow`
# Objective
Implement FromIterator/IntoIterator for dynamic types where missing
Note:
- can't impl `IntoIterator` for `&Array` & co because of orphan rules
- `into_iter().collect()` is a no-op for `Vec`s because of
specialization
---
## Migration Guide
- Change `DynamicArray::from_vec` to `DynamicArray::from_iter`
# Objective
`Commands::spawn_empty` docs say that it queues a command to spawn an
entity, but it doesn't. It immediately reserves an `Entity` to be
spawned at the next flush point, which is possible because
`Entities::reserve_entity()` takes `&self` and no components are added
yet.
## Solution
Fix docs.
# Objective
- All UI systems should be in system sets that are easy to order around
in user code.
## Solution
- Add `UiSystem::Prepare` and `UiSystem::PostLayout` system sets to
capture floater systems.
- Adjust how UI systems are scheduled to align with the new sets.
This is *mostly* a pure refactor without any behavior/scheduling
changes. See migration guide.
## Testing
- Not tested, correctness by inspection.
---
## Migration Guide
`UiSystem` system set adjustments.
- The `UiSystem::Outline` system set is now strictly ordered after
`UiSystem::Layout`, rather than overlapping it.
# Objective
Fixes#14202
## Solution
Add `on_replaced` component hook and `OnReplaced` observer trigger
## Testing
- Did you test these changes? If so, how?
- Updated & added unit tests
---
## Changelog
- Added new `on_replaced` component hook and `OnReplaced` observer
trigger for performing cleanup on component values when they are
overwritten with `.insert()`
# Objective
- Using bincode to deserialize binary into a MeshletMesh is expensive
(~77ms for a 5mb file).
## Solution
- Write a custom deserializer using bytemuck's Pod types and slice
casting.
- Total asset load time has gone from ~102ms to ~12ms.
- Change some types I never meant to be public to private and other misc
cleanup.
## Testing
- Ran the meshlet example and added timing spans to the asset loader.
---
## Changelog
- Improved `MeshletMesh` loading speed
- The `MeshletMesh` disk format has changed, and
`MESHLET_MESH_ASSET_VERSION` has been bumped
- `MeshletMesh` fields are now private
- Renamed `MeshletMeshSaverLoad` to `MeshletMeshSaverLoader`
- The `Meshlet`, `MeshletBoundingSpheres`, and `MeshletBoundingSphere`
types are now private
- Removed `MeshletMeshSaveOrLoadError::SerializationOrDeserialization`
- Added `MeshletMeshSaveOrLoadError::WrongFileType`
## Migration Guide
- Regenerate your `MeshletMesh` assets, as the disk format has changed,
and `MESHLET_MESH_ASSET_VERSION` has been bumped
- `MeshletMesh` fields are now private
- `MeshletMeshSaverLoad` is now named `MeshletMeshSaverLoader`
- The `Meshlet`, `MeshletBoundingSpheres`, and `MeshletBoundingSphere`
types are now private
- `MeshletMeshSaveOrLoadError::SerializationOrDeserialization` has been
removed
- Added `MeshletMeshSaveOrLoadError::WrongFileType`, match on this
variant if you match on `MeshletMeshSaveOrLoadError`
# Objective
Fixes https://github.com/bevyengine/bevy/issues/14157
## Solution
- Update the ObserverSystem traits to accept an `Out` parameter
## Testing
- Added a test where an observer system has a non-empty output which is
piped into another system
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
I would like to know if an event was emitted because of "key repeats" or
not.
Winit already exposes this information, but it isn't sent along by Bevy,
which this PR intends to address.
## Solution
Expose
[`winit::event::KeyEvent::repeat`](https://docs.rs/winit/0.30.3/winit/event/struct.KeyEvent.html#structfield.repeat)
in
[`bevy::input:⌨️:KeyboardInput`](https://docs.rs/bevy/0.14.0/bevy/input/keyboard/struct.KeyboardInput.html).
## Testing
Just hold any regular key down and only the first event should have
`KeyboardInput::repeat` set to `false`. Most OSs have "key repeat"
enabled by default.
---
## Changelog
- Added `KeyboardInput::repeat` signifying if this event was sent in
response to a "key repeat" event or not.
# Objective
Type data is a **super** useful tool to know about when working with
reflection. However, most users don't fully understand how it works or
that you can use it for more than just object-safe traits.
This is unfortunate because it can be surprisingly simple to manually
create your own type data.
We should have an example detailing how type works, how users can define
their own, and how thy can be used.
## Solution
Added a `type_data` example.
This example goes through all the major points about type data:
- Why we need them
- How they can be defined
- The two ways they can be registered
- A list of common/important type data provided by Bevy
I also thought it might be good to go over the `#[reflect_trait]` macro
as part of this example since it has all the other context, including
how to define type data in places where `#[reflect_trait]` won't work.
Because of this, I removed the `trait_reflection` example.
## Testing
You can run the example locally with the following command:
```
cargo run --example type_data
```
---
## Changelog
- Added the `type_data` example
- Removed the `trait_reflection` example
# Objective
Fixes a regression in [previously merged but then reverted
pr](https://github.com/bevyengine/bevy/pull/13714) that aligns
lower-level `Scene` API with that in `DynamicScene`. Please look at the
original pr for more details.
The problem was `spawn_sync_internal` is used in `spawn_queued_scenes`.
Since instance creation was moved up a level we need to make sure we add
a specific instance to `SceneSpawner::spawned_instances` when using
`spawn_sync_internal` (just like we do for `DynamicScene`).
Please look at the last commit when reviewing.
## Testing
`alien_cake_addict` and `deferred_rendering` examples look as expected.
## Changelog
Changed `Scene::write_to_world_with` to take `entity_map` as an argument
and no longer return an `InstanceInfo`
## Migration Guide
`Scene::write_to_world_with` no longer returns an `InstanceInfo`.
Before
```rust
scene.write_to_world_with(world, ®istry)
```
After
```rust
let mut entity_map = EntityHashMap::default();
scene.write_to_world_with(world, &mut entity_map, ®istry)
```
# Objective
Explicitly and exactly know what of the environment variables (if any)
are being used/not-used/found-not-found by the
`bevy_asset::io::file::get_base_path()`.
- Describe the objective or issue this PR addresses:
In a sufficiently complex project, with enough crates and such it _can_
be hard to know what the Asset Server is using as, what in the bevy
parlance is its 'base path', this change seems to be the lowest effort
to discovering that.
## Solution
- Added `debug!` logging to the `FileAssetReader::new()` call.
## Testing
See output by making a project and trying something like
`RUST_LOG=bevy_asset::io::file=debug cargo run`
- Ran Bevy's tests.
- How can other people (reviewers) test your changes?: Intentionally
mess with your `env` variables (BEVY_ASSET_ROOT and CARGO_MANIFEST_DIR,
scatter assets about and attempt to (without this change) locate where
it's going wrong.
- Is there anything specific they need to know?: I encountered this
issue in a rather large workspace with many many crates with multiple
nested asset directories.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test? Linux.
---
This commit creates a new built-in postprocessing shader that's designed
to hold miscellaneous postprocessing effects, and starts it off with
chromatic aberration. Possible future effects include vignette, film
grain, and lens distortion.
[Chromatic aberration] is a common postprocessing effect that simulates
lenses that fail to focus all colors of light to a single point. It's
often used for impact effects and/or horror games. This patch uses the
technique from *Inside* ([Gjøl & Svendsen 2016]), which allows the
developer to customize the particular color pattern to achieve different
effects. Unity HDRP uses the same technique, while Unreal has a
hard-wired fixed color pattern.
A new example, `post_processing`, has been added, in order to
demonstrate the technique. The existing `post_processing` shader has
been renamed to `custom_post_processing`, for clarity.
[Chromatic aberration]:
https://en.wikipedia.org/wiki/Chromatic_aberration
[Gjøl & Svendsen 2016]:
https://github.com/playdeadgames/publications/blob/master/INSIDE/rendering_inside_gdc2016.pdf
## Changelog
### Added
* Chromatic aberration is now available as a built-in postprocessing
effect. To use it, add `ChromaticAberration` to your camera.
# Objective
Add basic bubbling to observers, modeled off `bevy_eventlistener`.
## Solution
- Introduce a new `Traversal` trait for components which point to other
entities.
- Provide a default `TraverseNone: Traversal` component which cannot be
constructed.
- Implement `Traversal` for `Parent`.
- The `Event` trait now has an associated `Traversal` which defaults to
`TraverseNone`.
- Added a field `bubbling: &mut bool` to `Trigger` which can be used to
instruct the runner to bubble the event to the entity specified by the
event's traversal type.
- Added an associated constant `SHOULD_BUBBLE` to `Event` which
configures the default bubbling state.
- Added logic to wire this all up correctly.
Introducing the new associated information directly on `Event` (instead
of a new `BubblingEvent` trait) lets us dispatch both bubbling and
non-bubbling events through the same api.
## Testing
I have added several unit tests to cover the common bugs I identified
during development. Running the unit tests should be enough to validate
correctness. The changes effect unsafe portions of the code, but should
not change any of the safety assertions.
## Changelog
Observers can now bubble up the entity hierarchy! To create a bubbling
event, change your `Derive(Event)` to something like the following:
```rust
#[derive(Component)]
struct MyEvent;
impl Event for MyEvent {
type Traverse = Parent; // This event will propagate up from child to parent.
const AUTO_PROPAGATE: bool = true; // This event will propagate by default.
}
```
You can dispatch a bubbling event using the normal
`world.trigger_targets(MyEvent, entity)`.
Halting an event mid-bubble can be done using
`trigger.propagate(false)`. Events with `AUTO_PROPAGATE = false` will
not propagate by default, but you can enable it using
`trigger.propagate(true)`.
If there are multiple observers attached to a target, they will all be
triggered by bubbling. They all share a bubbling state, which can be
accessed mutably using `trigger.propagation_mut()` (`trigger.propagate`
is just sugar for this).
You can choose to implement `Traversal` for your own types, if you want
to bubble along a different structure than provided by `bevy_hierarchy`.
Implementers must be careful never to produce loops, because this will
cause bevy to hang.
## Migration Guide
+ Manual implementations of `Event` should add associated type `Traverse
= TraverseNone` and associated constant `AUTO_PROPAGATE = false`;
+ `Trigger::new` has new field `propagation: &mut Propagation` which
provides the bubbling state.
+ `ObserverRunner` now takes the same `&mut Propagation` as a final
parameter.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.23.1 to
1.23.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.23.2</h2>
<h2>[1.23.2] - 2024-07-10</h2>
<h3>Features</h3>
<ul>
<li>Automatically ignore JWT tokens</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.23.2] - 2024-07-10</h2>
<h3>Features</h3>
<ul>
<li>Automatically ignore JWT tokens</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="320b578147"><code>320b578</code></a>
chore: Release</li>
<li><a
href="4259807ead"><code>4259807</code></a>
docs: Update changelog</li>
<li><a
href="fdac765801"><code>fdac765</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1058">#1058</a>
from epage/jwt</li>
<li><a
href="6047fba1fe"><code>6047fba</code></a>
feat(tokens): Ignore JWTs</li>
<li><a
href="5eab324cdd"><code>5eab324</code></a>
refactor(tokens): Simplify parser logic</li>
<li><a
href="8c8f52fe6a"><code>8c8f52f</code></a>
test(tokens): Show JWT behavior</li>
<li><a
href="dc42232bba"><code>dc42232</code></a>
test(tokens): Use snapshot testing</li>
<li><a
href="4dfaa36adf"><code>4dfaa36</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1050">#1050</a>
from crate-ci/renovate/maturin-1.x</li>
<li><a
href="1eae253a72"><code>1eae253</code></a>
chore(deps): Update dependency maturin to >=1.6,<1.7</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.23.1...v1.23.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
Reading the documentation it wasn't clear to me where to see a
definitive list of working groups. I somehow missed the discord channel,
I'm not sure if my Discord settings had it hidden.
## Solution
I've made it clearer in the docs where to find the list of existing
working groups.
Note: This assumes that all working groups are in there on the discord,
that's my understanding from the current docs.
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Right now, `TypeInfo` can be accessed directly from a type using either
`Typed::type_info` or `Reflect::get_represented_type_info`.
However, once that `TypeInfo` is accessed, any nested types must be
accessed via the `TypeRegistry`.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let registry = TypeRegistry::default();
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = registry.get_type_info(field.type_id()).unwrap();
assert!(field_info.is::<usize>());;
```
## Solution
Enable nested types within a `TypeInfo` to be retrieved directly.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = field.type_info().unwrap();
assert!(field_info.is::<usize>());;
```
The particular implementation was chosen for two reasons.
Firstly, we can't just store `TypeInfo` inside another `TypeInfo`
directly. This is because some types are recursive and would result in a
deadlock when trying to create the `TypeInfo` (i.e. it has to create the
`TypeInfo` before it can use it, but it also needs the `TypeInfo` before
it can create it). Therefore, we must instead store the function so it
can be retrieved lazily.
I had considered also using a `OnceLock` or something to lazily cache
the info, but I figured we can look into optimizations later. The API
should remain the same with or without the `OnceLock`.
Secondly, a new wrapper trait had to be introduced: `MaybeTyped`. Like
`RegisterForReflection`, this trait is `#[doc(hidden)]` and only exists
so that we can properly handle dynamic type fields without requiring
them to implement `Typed`. We don't want dynamic types to implement
`Typed` due to the fact that it would make the return type
`Option<&'static TypeInfo>` for all types even though only the dynamic
types ever need to return `None` (see #6971 for details).
Users should never have to interact with this trait as it has a blanket
impl for all `Typed` types. And `Typed` is automatically implemented
when deriving `Reflect` (as it is required).
The one downside is we do need to return `Option<&'static TypeInfo>`
from all these new methods so that we can handle the dynamic cases. If
we didn't have to, we'd be able to get rid of the `Option` entirely. But
I think that's an okay tradeoff for this one part of the API, and keeps
the other APIs intact.
## Testing
This PR contains tests to verify everything works as expected. You can
test locally by running:
```
cargo test --package bevy_reflect
```
---
## Changelog
### Public Changes
- Added `ArrayInfo::item_info` method
- Added `NamedField::type_info` method
- Added `UnnamedField::type_info` method
- Added `ListInfo::item_info` method
- Added `MapInfo::key_info` method
- Added `MapInfo::value_info` method
- All active fields now have a `Typed` bound (remember that this is
automatically satisfied for all types that derive `Reflect`)
### Internal Changes
- Added `MaybeTyped` trait
## Migration Guide
All active fields for reflected types (including lists, maps, tuples,
etc.), must implement `Typed`. For the majority of users this won't have
any visible impact.
However, users implementing `Reflect` manually may need to update their
types to implement `Typed` if they weren't already.
Additionally, custom dynamic types will need to implement the new hidden
`MaybeTyped` trait.
# Objective
There are times when we might know the type of a `TypeInfo` ahead of
time. Or we may have already checked it one way or another.
In such cases, it's a bit cumbersome to have to pattern match every time
we want to access the nested info:
```rust
if let TypeInfo::List(info) = <Vec<i32>>::type_info() {
// ...
} else {
panic!("expected list info");
}
```
Ideally, there would be a way to simply perform the cast down to
`ListInfo` since we already know it will succeed.
Or even if we don't, perhaps we just want a cleaner way of exiting a
function early (i.e. with the `?` operator).
## Solution
Taking a bit from
[`mirror-mirror`](https://docs.rs/mirror-mirror/latest/mirror_mirror/struct.TypeDescriptor.html#implementations),
`TypeInfo` now has methods for attempting a cast into the variant's info
type.
```rust
let info = <Vec<i32>>::type_info().as_list().unwrap();
// ...
```
These new conversion methods return a `Result` where the error type is a
new `TypeInfoError` enum.
A `Result` was chosen as the return type over `Option` because if we do
choose to `unwrap` it, the error message will give us some indication of
what went wrong. In other words, it can truly replace those instances
where we were panicking in the `else` case.
### Open Questions
1. Should the error types instead be a struct? I chose an enum for
future-proofing, but right now it only has one error state.
Alternatively, we could make it a reflect-wide casting error so it could
be used for similar methods on `ReflectRef` and friends.
2. I was going to do it in a separate PR but should I just go ahead and
add similar methods to `ReflectRef`, `ReflectMut`, and `ReflectOwned`? 🤔
3. Should we name these `try_as_***` instead of `as_***` since they
return a `Result`?
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect
```
---
## Changelog
### Added
- `TypeInfoError` enum
- `TypeInfo::kind` method
- `TypeInfo::as_struct` method
- `TypeInfo::as_tuple_struct` method
- `TypeInfo::as_tuple` method
- `TypeInfo::as_list` method
- `TypeInfo::as_array` method
- `TypeInfo::as_map` method
- `TypeInfo::as_enum` method
- `TypeInfo::as_value` method
- `VariantInfoError` enum
- `VariantInfo::variant_type` method
- `VariantInfo::as_unit_variant` method
- `VariantInfo::as_tuple_variant` method
- `VariantInfo::as_struct_variant` method
# Objective
The isometry types added in #14269 support transforming other isometries
and points, as well as computing the inverse of an isometry using
`inverse`.
However, transformations like `iso1.inverse() * iso2` and `iso.inverse()
* point` can be optimized for single-shot cases using custom methods
that avoid an extra rotation operation.
## Solution
Add `inverse_mul` and `inverse_transform_point` for `Isometry2d` and
`Isometry3d`. Note that these methods are only faster when the isometry
can't be reused for multiple transformations.
## Testing
All of the methods have a test, similarly to the existing transformation
operations.
# Objective
Creating isometry types with just a translation is a bit more verbose
than it needs to be for cases where you don't have an existing vector to
pass in.
```rust
let iso = Isometry3d::from_translation(Vec3::new(2.0, 1.0, -1.0));
```
This could be made more ergonomic with a method similar to
`Dir2::from_xy`, `Dir3::from_xyz`, and `Transform::from_xyz`:
```rust
let iso = Isometry3d::from_xyz(2.0, 1.0, -1.0);
```
## Solution
Add `Isometry2d::from_xy` and `Isometry3d::from_xyz`.
# Objective
- After #11804 , The queue_prepass_material_meshes function is now
executed in parallel with other queue_* systems. This optimization
introduced a potential issue where mesh_instance.should_batch() could
return false in queue_prepass_material_meshes due to an unset
material_bind_group_id.
# Objective
- After #13894, I noticed the performance of `many_lights `dropped from
120+ to 60+. I reviewed the PR but couldn't identify any mistakes. After
profiling, I discovered that `Hashmap::Clone `was very slow when its not
empty, causing `extract_light` to increase from 3ms to 8ms.
- Lighting only checks visibility for 3D Meshes. We don't need to
maintain a TypeIdMap for this, as it not only impacts performance
negatively but also reduces ergonomics.
## Solution
- use VisibleMeshEntities for lighint visibility checking.
## Performance
cargo run --release --example many_lights --features bevy/trace_tracy
name="bevy_pbr::light::check_point_light_mesh_visibility"}
system{name="bevy_pbr::render::light::extract_lights"}
## Migration Guide
> now `SpotLightBundle` , `CascadesVisibleEntities `and
`CubemapVisibleEntities `use VisibleMeshEntities instead of
`VisibleEntities`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Helps improve https://github.com/bevyengine/bevy/issues/14151
## Solution
- At least return an error message from the `Option::unwrap()` call when
we try to access the `StateTransition` schedule
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
Function reflection requires a lot of macro code generation in the form
of several `all_tuples!` invocations, as well as impls generated in the
`Reflect` derive macro.
Seeing as function reflection is currently a bit more niche, it makes
sense to gate it all behind a feature.
## Solution
Add a `functions` feature to `bevy_reflect`, which can be enabled in
Bevy using the `reflect_functions` feature.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect
```
That should ensure that everything still works with the feature
disabled.
To test with the feature on, you can run:
```
cargo test --package bevy_reflect --features functions
```
---
## Changelog
- Moved function reflection behind a Cargo feature
(`bevy/reflect_functions` and `bevy_reflect/functions`)
- Add `IntoFunction` export in `bevy_reflect::prelude`
## Internal Migration Guide
> [!important]
> Function reflection was introduced as part of the 0.15 dev cycle. This
migration guide was written for developers relying on `main` during this
cycle, and is not a breaking change coming from 0.14.
Function reflection is now gated behind a feature. To use function
reflection, enable the feature:
- If using `bevy_reflect` directly, enable the `functions` feature
- If using `bevy`, enable the `reflect_functions` feature
# Objective
update the `load_gltf_extras.rs` example to the newest bevy api
## Solution
uses the new type-safe code for loading the scene #0 from the gltf
instead of a path suffix
## Testing
the example runs as expected
# Objective
Introduce isometry types for describing relative and absolute position
in mathematical contexts.
## Solution
For the time being, this is a very minimal implementation. This
implements the following faculties for two- and three-dimensional
isometry types:
- Identity transformations
- Creation from translations and/or rotations
- Inverses
- Multiplication (composition) of isometries with each other
- Application of isometries to points (as vectors)
- Conversion of isometries to affine transformations
There is obviously a lot more that could be added, so I erred on the
side of adding things that I knew would be useful, with the idea of
expanding this in the near future as needed.
(I also fixed some random doc problems in `bevy_math`.)
---
## Design
One point of interest here is the matter of if/when to use aligned
types. In the implementation of 3d isometries, I used `Vec3A` rather
than `Vec3` because it has no impact on size/alignment, but I'm still
not sure about that decision (although it is easily changed).
For 2d isometries — which are encoded by four floats — the idea of
shoving them into a single 128-bit buffer (`__m128` or whatever) sounds
kind of enticing, but it's more involved and would involve writing
unsafe code, so I didn't do that for now.
## Future work
- Expand the API to include shortcuts like `inverse_mul` and
`inverse_transform` for efficiency reasons.
- Include more convenience constructors and methods (e.g. `from_xy`,
`from_xyz`).
- Refactor `bevy_math::bounding` to use the isometry types.
- Add conversions to/from isometries for `Transform`/`GlobalTransform`
in `bevy_transform`.
# Objective
- Bevy currently has lot of invalid intra-doc links, let's fix them!
- Also make CI test them, to avoid future regressions.
- Helps with #1983 (but doesn't fix it, as there could still be explicit
links to docs.rs that are broken)
## Solution
- Make `cargo r -p ci -- doc-check` check fail on warnings (could also
be changed to just some specific lints)
- Manually fix all the warnings (note that in some cases it was unclear
to me what the fix should have been, I'll try to highlight them in a
self-review)
