mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-24 03:33:08 +00:00
134a6e5b5f
- Added stm32f4 hal and ll drivers pdf - Removed all the lfs objects to the old wiki - Removed lfs gitattribute garbage Signed-off-by: Henry Pauli <henry@mixict.nl> Co-authored-by: Henry Paulissen <henry@mixict.nl>
22 lines
1.1 KiB
Markdown
22 lines
1.1 KiB
Markdown
Flipper Zero has a built-in 1-Wire pad to read iButton (DS1990A) keys, also known as TouchMemory or Dallas keys. This technology is quite old but still widely used around the world. It's based on 1-Wire protocol and doesn't have any authentication, so Flipper can easily read these keys, save IDs into the memory, write IDs to blank keys, and emulate the key itself.
|
|
|
|
* **Reading & Writing & Emulating**
|
|
* **Protocol detection**: юзер может определить тип ключа поднося ключ к флипперу и тип считывателя поднося флиппер к домофону (цифрал, даллас и т.д.)
|
|
|
|
<img width="300" src="https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/ibutton/P1020756.jpg" />
|
|
|
|
## Reading
|
|
`iButton(1-Wire) -> Reading`
|
|
|
|
Flipper will wait for iButton tag. While waiting red LED is blinking.
|
|
Lean tag on iButton reader in the back side of Flipper Zero:
|
|
|
|
<img width="300" src="https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/ibutton/read1.jpeg" />
|
|
|
|
# UI
|
|
|
|
## Main menu
|
|
|
|
* Read
|
|
* Saved Keys
|
|
* Enter manually
|