unleashed-firmware/firmware/targets/f7/furi_hal/furi_hal_interrupt.h
Georgii Surkov 01434265f6
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00

82 lines
1.9 KiB
C

#pragma once
#include <stm32wbxx_ll_tim.h>
#ifdef __cplusplus
extern "C" {
#endif
/** Timer ISR */
typedef void (*FuriHalInterruptISR)(void* context);
typedef enum {
// TIM1, TIM16, TIM17
FuriHalInterruptIdTim1TrgComTim17,
FuriHalInterruptIdTim1Cc,
FuriHalInterruptIdTim1UpTim16,
// TIM2
FuriHalInterruptIdTIM2,
// DMA1
FuriHalInterruptIdDma1Ch1,
FuriHalInterruptIdDma1Ch2,
FuriHalInterruptIdDma1Ch3,
FuriHalInterruptIdDma1Ch4,
FuriHalInterruptIdDma1Ch5,
FuriHalInterruptIdDma1Ch6,
FuriHalInterruptIdDma1Ch7,
// DMA2
FuriHalInterruptIdDma2Ch1,
FuriHalInterruptIdDma2Ch2,
FuriHalInterruptIdDma2Ch3,
FuriHalInterruptIdDma2Ch4,
FuriHalInterruptIdDma2Ch5,
FuriHalInterruptIdDma2Ch6,
FuriHalInterruptIdDma2Ch7,
// RCC
FuriHalInterruptIdRcc,
// Comp
FuriHalInterruptIdCOMP,
// HSEM
FuriHalInterruptIdHsem,
// LPTIMx
FuriHalInterruptIdLpTim1,
FuriHalInterruptIdLpTim2,
// Service value
FuriHalInterruptIdMax,
} FuriHalInterruptId;
/** Initialize interrupt subsystem */
void furi_hal_interrupt_init();
/** Set ISR and enable interrupt with default priority
* We don't clear interrupt flags for you, do it by your self.
* @param index - interrupt ID
* @param isr - your interrupt service routine or use NULL to clear
* @param context - isr context
*/
void furi_hal_interrupt_set_isr(FuriHalInterruptId index, FuriHalInterruptISR isr, void* context);
/** Set ISR and enable interrupt with custom priority
* We don't clear interrupt flags for you, do it by your self.
* @param index - interrupt ID
* @param priority - 0 to 15, 0 highest
* @param isr - your interrupt service routine or use NULL to clear
* @param context - isr context
*/
void furi_hal_interrupt_set_isr_ex(
FuriHalInterruptId index,
uint16_t priority,
FuriHalInterruptISR isr,
void* context);
#ifdef __cplusplus
}
#endif