Mirrors/unleashed-firmware
2
0
Fork 0
mirror of https://github.com/DarkFlippers/unleashed-firmware synced 2024-11-27 23:10:22 +00:00
Code Issues Projects Releases Packages Wiki Activity
unleashed-firmware/documentation/SubGHzRemoteProg.md
MX 9f6f391354
Update changelog and docs
2023-02-28 06:56:54 +03:00

3.1 KiB
Raw Blame History

How to use Flipper as a new SubGHz remote (not clone of original remote)

Somfy Telis

  1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> Somfy Telis 433Mhz
  2. Open your new remote file
  3. Long press (hold) the ‘Prog’ button on a remote that is already registered to the device, until the blinds move shortly up and down.
  4. Press and hold the ‘Prog’ button on the flipper (Left Arrow), until the blinds move shortly up and down again.
  5. Done?

BFT Mitto

  1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> BFT Mitto 433Mhz
  2. Open your new remote file
  3. You need to be in minimum 3 meters to receiver
  4. Original Remote: Press hidden button on back of remote with a pin or paper clip OR press Button 1 & 2 together until remote LED lights.
  5. Original Remote: Momentarily press button that opens device
  6. Long press (Right Arrow) - (0xF button - Btn:F) on Flipper for like 3-5 sec
  7. Done?

Nice Flor S

  • Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> Nice FloR-S 433Mhz
  • Open your new remote file

Coding using an existing remote

To enter the code of a new remote control without using your receiver, you will need an authorised remote control (note: the first remote control must always be entered using the receiver key). Now, with the two remote controls (your already coded remote, and your new remote), which we shall call NEW (the one whose code we want to enter) and OLD (the authorised one), position yourself within 3m of the gate/garage receiver and then:

  1. Press and hold the Send button on the flipper for at least 5 seconds and then release.
  2. Press the button on the already programmed remote 3 times slowly.
  3. Press the Send button on the flipper slowly and then release.

Coding directly to your receiver

Your new remote will program to your receiver as per your original remote instructions, so please refer to your manual. But for a typical NICE FLOX2R Receiver, the programming procedure is as follows:

  1. Press the learning button on your receiver for 1-2 seconds. The LED will turn on for 5 seconds. Within 5 seconds, complete the next step.
  2. Press a Send button on your flipper until the LED on your receiver turns off.
  3. Release the remote button and wait for 2 seconds.
  4. Press the Send button on your flipper again. The LED on your receiver will now flash 3 times. This indicates that your remote has been successfully coded. If this does not happen, repeat the whole procedure from the beginning, and try again.
  5. Wait 5 seconds. Press the button on your new remote to test if it opens your garage/gate.

Follow links below to find more detailed instructions!!!

Materials used: