mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-18 00:33:09 +00:00
3.4 KiB
3.4 KiB
- Firmware target: F2
- Body version: no body
- Interconnection version: 1
Device layout
Pinout:
Pin | Mode | Define | Description |
---|---|---|---|
PC13 | EXTI13 | BUTTON_BACK | Button |
PC14 | RCC_OSC32_IN | 32768 kHz XTAL | |
PC15 | RCC_OSC32_OUT | 32768 kHz XTAL | |
PH0 | RCC_OSC_IN | 16 MHz XTAL | |
PH1 | RCC_OSC_OUT | 16 MHz XTAL | |
PC0 | GPIO_Analog | External GPIO | |
PC1 | GPIO_Analog | External GPIO | |
PC2 | EXTI2 | CHRG | Charge state |
PC3 | ADC1_IN4 | BATT_V | Battery voltage |
PA0 | ADC1_IN5 | IR_RX | Infrared receiver |
PA1 | EXTI1 | BUTTON_DOWN | Button |
PA2 | GPIO_Output | DISPLAY_DI | Display |
PA3 | TIM5_CH4 | SPEAKER | |
PA4 | GPIO_Analog | External GPIO | |
PA5 | GPIO_Analog | External GPIO | |
PA6 | GPIO_Analog | External GPIO | |
PA7 | GPIO_Analog | External GPIO | |
PC4 | GPIO_Output | NFC_CS | NFC SPI CS |
PC5 | COMP1_INP | RFID_RF_IN | 125 kHz RFID RX, contact keys analog input (for Cyfral/metakom) |
PB0 | EXTI0 | BUTTON_UP | Button |
PB1 | GPIO_Output | LED_BLUE | Led |
PB2 | GPIO_Analog | External GPIO | |
PB10 | GPIO_Output | DISPLAY_RST | Display |
PB11 | GPIO_Output | IR_TX | Infrared transmit |
PB12 | GPIO_Analog | External GPIO | |
PB13 | TIM15_CH1N | RFID_OUT | RFID 125 kHz read master tone/write TX |
PB14 | GPIO_Output | LED_GREEN | Led |
PB15 | TIM15_CH2 | RFID_PULL | RFID 125 kHz write/emulate pulling |
PC6 | GPIO_Output | VIBRO | |
PC7 | TIM8_CH2 | iButton | contact key |
PC8 | GPIO_Output | DISPLAY_CS | Dispay |
PC9 | GPIO_Output | SD_CS | microSD card SD |
PA8 | GPIO_Output | LED_RED | Led |
PA9 | USART1_TX | External GPIO/USART TX | |
PA10 | USART1_RX | External GPIO/USART RX | |
PA11 | USB_OTG_FS_DM | USB | |
PA12 | USB_OTG_FS_DP | USB | |
PA13 | SWDIO | External GPIO/SWDIO | |
PA14 | SWCLK | External GPIO/SWDCLK | |
PA15 | GPIO_Output | CC1101_CS | CC1101 CS |
PC10 | SPI3_SCK | SD/CC1101/NFC SPI | |
PC11 | SPI3_MISO | SD/CC1101/NFC SPI | |
PC12 | SPI3_MOSI | SD/CC1101/NFC SPI | |
PD2 | GPIO_Analog | External GPIO | |
PB3 | SPI1_SCK | Display | |
PB4 | EXTI4 | BUTTON_LEFT | Button |
PB5 | SPI1_MOSI | Display | |
PB6 | GPIO_Output | DISPLAY_BACKLIGHT | |
PB7 | GPIO_Input | CC1101_G0 | |
PB8 | EXTI8 | BUTTON_RIGHT | Button |
PB9 | EXTI9 | BUTTON_OK | Button |
External GPIO
Pin | |||||
---|---|---|---|---|---|
PC0 | GPIO | LPUART RX | ADC1/2/3-1 | I²C SCL | |
PC1 | GPIO | LPUART TX | ADC1/2/3-2 | I²C SDA | |
PA4 | GPIO | DAC1-1 | ADC1/2-9 | SPI1 NSS | |
PA5 | GPIO | DAC1-2 | ADC1/2-10 | SPI1 SCK | TIM2/8 OUT |
PA6 | GPIO | ADC1/2-11 | SPI1 MISO | TIM3/16 OUT | |
PA7 | GPIO | ADC1/2-12 | SPI1 MOSI | TIM1/2/8/17 OUT | |
PB2 | GPIO | RTC Alarm | |||
PB12 | GPIO | ||||
PA9 | GPIO | USART1 TX | |||
PA10 | GPIO | USART1 RX | |||
PA13 | GPIO | SWDIO | |||
PA14 | GPIO | SWCLK | |||
PD2 | GPIO | UART5 RX |