0df33899eb
disable ext module due to lack of required hardware on them and incorrect usage of freq analyzer, like trying to receive "signals" with it (from the space??), while it should be used only to get frequency of the remote placed around 1-10cm around flipper's left corner Also fix possible GSM mobile towers signal interference by limiting upper freq to 920mhz max Fix dupliacted freq lists and use user config for nearest freq selector too (finally)
2.6 KiB
How to add new SubGHz frequencies
CC1101 Frequency range specs: 300-348 MHz, 386-464 MHz, and 778-928 MHz (+ 350MHz and 467MHz was added to default range)
Edit user settings file located on your microSD card - subghz/assets/setting_user (remove .example from name to use config)
in this file you will find we already have extra frequencies added if you need your custom one, make sure it doesn't listed here
Default frequency list
/* 300 - 348 */
300000000,
302757000,
303875000,
303900000,
304250000,
307000000,
307500000,
307800000,
309000000,
310000000,
312000000,
312100000,
312200000,
313000000,
313850000,
314000000,
314350000,
314980000,
315000000,
318000000,
320000000,
320150000,
330000000,
345000000,
348000000,
350000000,
/* 387 - 464 */
387000000,
390000000,
418000000,
430000000,
430500000,
431000000,
431500000,
433075000, /* LPD433 first */
433220000,
433420000,
433657070,
433889000,
433920000 | FREQUENCY_FLAG_DEFAULT, /* LPD433 mid */
434075000,
434176948,
434190000,
434390000,
434420000,
434620000,
434775000, /* LPD433 last channels */
438900000,
440175000,
464000000,
467750000,
/* 779 - 928 */
779000000,
868350000,
868400000,
868800000,
868950000,
906400000,
915000000,
925000000,
928000000,
User frequencies added AFTER that default list! You need to continue until you reach the end of that list
If you want to disable default list and use ONLY user added frequencies from user settings file
Change that line
#Add_standard_frequencies: true
to
Add_standard_frequencies: false
You need to have custom frequencies added in both lists! in main frequency list and in hopping list! Replacing only hopping freqs will not work with that setting set on false, you need to add something in main list since it will be empty
To add your own frequency to user list
Just add new line
Frequency: 928000000 - where 928000000 is your frequency, keep it in that format! it should be 9 digits!
Hopper frequency list
To add new frequency to hopper:
add new line Hopper_frequency: 345000000
But remember! You should keep it as small as possible, or hopper functionality would be useless!
If #Add_standard_frequencies: true is not changed
Your frequencies will be added after default ones
Default hopper list
310000000,
315000000,
318000000,
418000000,
433920000,
868350000,