* added support for ISO15693 (NfcV) emulation, added support for reading SLIX tags
* SLIX: fixed crash situation when an invalid password was requested
* ISO15693: show emulate menu when opening file
* rename NfcV emulate scene to match other NfcV names
* optimize allocation size for signals
* ISO15693: further optimizations of allocation and free code
* ISO15693: reduce latency on state machine reset
* respond with block security status when option flag is set
* increased maximum memory size to match standard
added security status handling/load/save
added SELECT/QUIET handling
more fine grained allocation routines and checks
fix memset sizes
* added "Listen NfcV Reader" to sniff traffic from reader to card
* added correct description to delete menu
* also added DSFID/AFI handling and locking
* increase sniff log size
* scale NfcV frequency a bit, add echo mode, fix signal level at the end
* use symbolic modulated/unmodulated GPIO levels
* honor AFI field, decrease verbosity and removed debug code
* refactor defines for less namespace pollution by using NFCV_ prefixes
* correct an oversight that original cards return an generic error when addressing outside block range
* use inverse modulation, increasing readable range significantly
* rework and better document nfc chip initialization
* nfcv code review fixes
* Disable accidentally left on signal debug gpio output
* Improve NFCV Read/Info GUIs. Authored by @xMasterX, committed by @nvx
* Fix crash that occurs when you exit from NFCV emulation and start it again. Authored by @xMasterX, committed by @nvx
* Remove delay from emulation loop. This improves compatibility when the reader is Android.
* Lib: digital signal debug output pin info
Co-authored-by: Tiernan Messmer <tiernan.messmer@gmail.com>
Co-authored-by: MX <10697207+xMasterX@users.noreply.github.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* digital signal: add optimization
* nfc test: more restrict tests
* digital signal: build as separate library
* digital signal: remove unused flags, format sources
* digital signal: fix cflag name
* target: fix build for f18 target
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: add bus abstraction and port some subsystem to it
* Make PVS happy, cleanup code
* Update API symbols for f18
* F18: backport bus changes from f7
* Revert to STOP2 sleep mode
* Fix downgrading the firmware via updater
* Port iButton TIM1 to furi_hal_bus
* Port Infrared TIM1 and TIM2 to furi_hal_bus
* Just enable the timer bus
* Port furi_hal_pwm to bus API
* Fix include statement
* Port furi_hal_rfid to bus API
* Port furi_hal_subghz and others to bus API
* Remove unneeded include
* Improve furi_hal_infrared defines
* Reset LPTIM1 via furi_hal_bus API
* Crash when trying to enable an already enabled peripheral
* Better defines
* Improved checks
* Lots of macro wrappers
* Copy spi changes for f18
* Fix crashes in LFRFID system
* Fix crashes in NFC system
* Improve comments
* Create FuriHalBus.md
* Update FuriHalBus.md
* Fix crash when launching updater
* Documentation: couple small fixes in FuriHalBus
* FuriHal: fix copypaste in furi_hal_rfid_tim_reset
* FuriHal: reset radio core related peripherals on restart
* FuriHalBus: is enabled routine and bug fix for uart
* RFID HAL: accomodate furi hal bus
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Implement support for reading Opal card (Sydney, Australia)
* stub_parser_verify_read: used UNUSED macro
* furi_hal_rtc: expose calendaring as functions
* opal: use bit-packed struct to parse, rather than manually shifting about
* Update f18 api symbols
Co-authored-by: あく <alleteam@gmail.com>
* nfc: Add Mifare Ultralight C detection
* nfc: Add display name for MFUL C and hide menu items
MFUL C unlock and emulation currently not supported, so hide from menu
if current card is MFUL C
* nfc: Also check response when probing 3DES auth
* nfc: Hide emulate option in saved menu for MFUL if not supported
* nfc: Remove unlock options from saved menu if Ultralight C
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Storage: common_rename is now POSIX compliant
* storage: check for success on storage_common_remove in file rename
---------
Co-authored-by: hedger <hedger@nanode.su>
* Add Mfkey32 application
* Fine tune RAM requirements, use FZ notification service API
* Fix PVS security warnings, fix issue with cracking keys on the FZ
* Prefer on-device or Flipper mobile app (seamless)
* Mfkey32: change app category to NFC
* Mfkey32: set target to f7 only
* Silence PVS false positives
* Correct PVS codes
Co-authored-by: あく <alleteam@gmail.com>
* desktop, about: replaced commit# with API version
* scripts: storage: added approx speed for file uploads
* scripts: selfupdate: use folder name by default
* vscode: fixed broken get_blackmagic shell integration on *nix
Co-authored-by: あく <alleteam@gmail.com>
* Furi: properly handle thread free before TCB scrapping, add furi_free - more invasive version of free to memmgr. FuriHal: add DWT comparator api to cortex. Updater, RPC: refactor various thread shanenigans. Code cleanup.
* Rollback free macros and related changes
* Loader: menu part
* Settings: remove unused loader api
* Desktop: get loader from record_open
* CLI: remove unneeded loader api
* gitignore: ignore .old files
* Loader: now really a service
* Loader: working service prototype
* Loader: cli, system start hooks
* CI/CD: make happy
* Loader: autorun
* Loader: lock and unlock
* Loader: rearrange code
* Gui, module menu: fix memleak
* Updater test: add timeout
* added update timeouts and max run duration
* Github: revert updater test workflow changes
* Loader: less missleading message in info cli command
Co-authored-by: doomwastaken <k.volkov@flipperdevices.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add SubGhzThresholdRssi
* SubGhz: remove direct reading of subghz-txrx-txrx_state
* SubGhz: remove direct reading subghz->txrx->hopper_state
* SubGhz: remove direct reading subghz->lock
* SubGhz: check load type file
* SubGhz: remove direct reading subghz->txrx->rx_key_state
* SubGhz: remove direct reading subghz->txrx->speaker_state
* SubGhz: refactoring subghz_scene_set_type.c
* SubGhz: moving "txrx" entity to a separate file
* SubGhz: show error tx start
* SubGhz: refactoring RPC
* SubGhz: value get optimizations
* SubGhz: fix name file
* SubGhz: add function description
* SubGhz: fix double back with a blocked transmission in this region and speacker, when a transmission is blocked in this region
* SubGhz: correct spelling
* SubGhz: better naming
* SubGhz: simplify includes
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* hal: device_info: added API version to "firmware.api.major" & "firmware.api.minor"
* FuriHal: bump device info version
Co-authored-by: あく <alleteam@gmail.com>
* Active RPC session icon
* Add RpcOwner, don't show the RPC icon when the session was started from BLE
* Fix rpc_test and f18 api
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
* Improve RNG error handling
* Sync RTC shadow registers on Stop mode exit
* Implement working STOP2 mode
* Fix formatting
* FuriHal: disable SWD pins if debug is disabled
* Power: cleanup battery info view, handle zero current report from gauge
* Fbt: add command line argument for extra global defines
* FuriHal: cleanup debug defines in power and os, drop deep_insomnia counter.
* Add a setting to disable deep sleep
* Clean up furi_hal_power
* FuriHal,FapLoader,Debug: implement debug in stop mode, workaround resume in stop
* FuriHal: document OS and power subsystems debugging
* Furi: enable debug interface on crash
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* AVR_ISP: fix NULL pointer dereference
* SubGhz: double back with a blocked transmission in this region
* SubGhz: fix speaker, when a transmission is blocked in this region
* SubGhz: fix speaker
* SubGhz: return region
* AVR Flasher: cleanup code
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Canvas with rotation
* Full icon rotation, cleanup of unused resources
* F18 API update
* Bitmap draw cleanup
* More cleaning up
* Migrate recovery and DFU to canvas
* Make the internal draw function static
* Remove all calls to u8g2_DrawXBM
Co-authored-by: あく <alleteam@gmail.com>
* WIP: builds
* can read standard
* Test standard picopass dictiony during attack
* correctly save diversified key
* read card on success
* more logs
* update file location
* Call setup methods
* backbutton and attempt at skip
* fixed skip
* remove found key state
* rename dictionary attack
* move notification
* center button back to start menu
* wait for card
* Picopass: proper integer formatting
* Picopass: even more proper integer formatting
* remove nextState
Co-authored-by: あく <alleteam@gmail.com>
* Core, Thread: mark thread to join from prvDeleteTCB
* USB HAL: move vars to MEM2
* Core, Thread: cleanup sources
* Cli: add magic delays on rx pipe error, prevent cli from consuming processor time
* Furi: update thread documentation
Co-authored-by: あく <alleteam@gmail.com>
* Separate ibutton to its own module, add one_wire to f18
* Move onewire cli to a separate app
* Add definitions for normal and overdrive timings
* Update api definitions
* Add rough overdrive timings definition for onewire emulation
* Remove one_wire_host_timing.h
* Add rough overdrive timings for onewire host
* Improve overdrive mode
* Working overdrive mode from flipper to flipper
* Update thermometer example app
* Turn on otg power when running thermometer example app
* Implement reset overdrive switching
* Always exit out of overdrive mode
* Improve overdrive timings
* Fix typos
* Fix reset behaviour
* Use overdrive mode everywhere in DS1996
* Improve comments
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
* debug: automated support for multiple debug symbol files
* faploader: extra checks for app list state
* debug: trigger BP before fap's EP if under debugger
* faploader, debug: better naming
* docs: info on load breakpoint
* faploader: header cleanup
* faploader: naming fixes
* debug: less verbose; setting debug flag more often
* typo fix
* updated parser and added stringln, hold and release
* removed unused code as requested from PR
* BadUsb: tiny change to trigger rebuild
Co-authored-by: p4p1 <p4p1@vivaldi.net>
Co-authored-by: あく <alleteam@gmail.com>
* Unify spelling of confirm exit/retry across apps.
* Unify infrared exit/retry confirm menus?
* "Keyboard Layout", not "Keyboard layout".
* Make iButton read scene prompt less awkward.
* "Detect Reader" in MF Classic saved menu instead of "Detect reader"
* NFC menu spelling changes only.
* Remove \n in strings in widget_add_string_element() calls.
Co-authored-by: あく <alleteam@gmail.com>
* NFC: Support reading Mifare Classic key B from sector trailer and reusing it for other sectors
* NFC: Fix my pointer typo
* NFC: Fix reading sector with B key where A key can't read block (fixes#2413) and fix Nfc Magic app not using NFC folder by default (in file select)
* NFC: Fix strange bug
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Support reseting iCx cards
* add submenu
* Fix auth
* switch key derivation to use same method
* test system keys using both elite and standard kdf
Co-authored-by: あく <alleteam@gmail.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* Temporary get Metakom and Cyfral keys out of the way
* Better enum name
* Syncing work, does not compile
* Syncing work, now compiles
* Working read impl for DS1990 and DS1992
* Add the ability to display extended key data
* Get rid of DialogEx
* Add save and load API
* Better iButtonKey encapsulation
* Fix crash
* Load key code boilerplate
* More load key code boilerplate
* Minor code cleanup
* Implement loading and saving DS1990 keys
* Implement the Info scene
* Implement loading & saving for DS1992
* Implement read error scene stub
* Implement delete confirmation screen
* Better error messages (protocol-dependent)
* Minor old code cleanup
* Remove iButtonDevice, add command callback to iButtonSlave
* Implement draft emulation for DS1990
* Better emulation for DS1990
* Initial emulation implementation for DS1992
* Better common command definitions
* Use common submenu callback, add protocol list
* Improve ViewData screen
* Improve scene_add_type
* Add stubs for write functionality
* Improve naming consistency
* Implement writing a DS1992 onto another one
* Improve DS1992 write code
* Improve DS1992 write code once more
* Prepare write_blank for DS1990, delete ibutton_writer
* Implement writing DS1990 onto blanks
* Fix reading DS1990
* Partially implement writing DS1992 onto blanks
* Implement GUI for writing keys
* Implement GUI for emulating keys
* Reduce memory usage for pretty_format
* Automatically truncate data more than 256 bytes
* Initial implementation of DS1996 (not tested)
* Fix crash due to missing virtual function
* Improve emulation code
* Improve DS1992 emulation code
* Correct return value for onewire_slave_send
* Correct return value for onewire_slave_receive
* Implement emulation for DS1992 & DS1996
* Better constant names
* Simplify & optimise the emulation code
* Remove duplicate code
* Add skip rom command emulation
* Show loading animation for large keys
* Implement manual adding & editing of keys
* Use buffered file streams to speed up saving & loading
* Reset key name before adding a new one
* Sync a buffered file stream before saving
* Use the DSGeneric protocol as a fallback option
* Implement emulation via RPC
* Refactor iButton code in preparation for comparator keys
* Refactor iButton code in preparation for comparator keys once more
* Make some functions static
* Make protocols not rely on one_wire classes
* Improve ProtocolDict usage
* Improve ProtocolDict usage more
* Implement reading Metakom & Cyfral keys
* Rename some files
* Better file structure
* Implement a unified interface for misc protocols
* Implement a unified interface for dallas protocols
* Concrete types for Dallas protocols
* Implement a unified interface for all key types
* Improved type naming
* Improved private types
* Proper types in protocol definitions
* Implement emulation for Cyfral & Metakom keys
* Implement save&load for Metakom & Cyfral keys
* Better type names
* Rename files, better names
* Allocate iButtonProtocols like a normal class
* Reset the key each time the start scene is selected
* Improve comments and constants
* Add ibutton_protocols to SDK headers
* Add ibutton_key to SDK headers
* Add ibutton_key to SDK headers
* Implement reading via cli
* Implement emulation via cli
* Implement writing Dallas blanks via cli
* Correctly revert the editing if cancelled by the user
* Correct committing mishap
* Elide the long text on the info screen
* Change key name for data in Misc keys
* Update iButtonFileFormat.md
* Remember the key's folder
* Save menu position in ReadKeyMenu and SavedKeyMenu
* Correct use of preselected path in file browser
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Threads: application id
* Unit tests: appsdata getter test
* Unit tests: moar test cases for appsdata getter
* Unit tests: remove folders after test
* Storage: dir_is_exist, migrate, + unit_tests
* Plugins: migration
* Storage: common_exists, moar unit_tests 4 "common_migrate", "common_migrate" and "common_merge" bugfixes
* Storage: use FuriString for path handling
* Storage API: send caller thread id with path
* Storage: remove StorageType field in storage file list
* Storage: simplify processing
* Storage API: send caller thread id with path everywhere
* Storage: /app alias, unit tests and path creation
* Storage, path helper: remove unused
* Examples: app data example
* App plugins: use new VFS path
* Storage: file_info_is_dir
* Services: handle alias if the service accepts a path.
* App plugins: fixes
* Make PVS happy
* Storage: fix storage_merge_recursive
* Storage: rename process_aliases to resolve_path. Rename APPS_DATA to APP_DATA.
* Apps: use predefined macro instead of raw paths. Example Apps Data: README fixes.
* Storage: rename storage_common_resolve_path to storage_common_resolve_path_and_ensure_app_directory
* Api: fix version
* Storage: rename alias message
* Storage: do not create app folders in path resolving process in certain cases.
---------
Co-authored-by: Astra <93453568+Astrrra@users.noreply.github.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal, Power, UnitTests: rename battery charge voltage limit API
* FuriHal: bump API, power info major versions
* Power: fix battery charge voltage limit for > 7.935v
Co-authored-by: あく <alleteam@gmail.com>
* Unify power info, power debug, and device_info into one info command
* Fix the storage script
* Cli: return device_info command for compatibility, rollback storage script
* Cli: remove unused context in info_get calls
* Cli: cleanup device info callbacks, switch to new separator
Co-authored-by: あく <alleteam@gmail.com>
* Show RSSI in weather station app: copy changes from main SubGHz app
* WeatherStation: remove dead code
* WeatherStation: sync naming schema with current code.
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add protocol DataRAW (binarization of data quantized by the minimum correlated duration)
* SubGhz: fix name history
* SubGhz: add encoder Data_RAW protocol
* SubGhz: decreasing the size of the LevelDuration structure
* SubGhz: history, added check that there is free RAM
* SubGhz: checking for free memory, support to pass without gap
* SubGhz: add running average to average the result, auto cut noise at the end of a burst
* SubGhz: support for repeating sequences
* SubGhz: fix secplus_v2 decoder
* SubGhz: bin_RAW fix add history
* SubGhz: add debug
* SubGhz: debug refactoring
* FURI_LOG: add FURI_LOG_RAW_x formatted string output like printf
* SubGhz: fix new FURI_LOG metod
* FURI_LOG: fix unit test
* SubGhz: add enable/disable BinRAW protocol decoding
* SubGhz: fix PVS
* SubGhz: forcibly turn off the speaker when exiting SubGhz
* SubGhz: adaptive adjustment to the noise level
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* fbt: building fap_dist as default target; accessor: fixed for latest ibutton changes
* fbt: not building fap_dist as default target; github: doing fap_dist for compact builds
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: Fix recording RAW files, sometimes could not start at a high level
* SubGhz: subghz_worker, add short duration filter setting
* SubGhz: capture raw timings in cli. Furi: clear pending interrupts on ISR set/reset
* SubGhz: fix start duration in furi_hal_subghz_start_async_rx
* [FL-3093] SubGhz: hopping issue in some regions
* [FL-3087] SubGhz: fix delete-ok issue
* SubGhz: remove copypasta from rx_raw cli command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* custom font set function
* update API symbols
* add example of custom font usage
* delete u8g2 dependency in example custom font
* rename to canvas_set_custom_u8g2_font
* now change the name in ALL places
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
* Changed blue LED to cyan in NFC Magic and Picopass apps.
* Fix capitalization of ATQA and UID in NFC Add Manually wizard.
* Fix reselection of "Saved" menu item in NFC and RFID apps.
* Fix double back press after deleting a file in the SubGhz browser.
* Make NFC app behave like other apps: return to the file browser after deleting a file.
* Rename NfcSceneSetAtqua to NfcSceneSetAtqa.
* Save selected menu items in NFC Magic and Picopass apps in a way that always works.
* Restore previous selection in Universal Remotes menu.
* Other way to do universal remote menu saving, and NFC Extra Actions saves last selection.
Co-authored-by: あく <alleteam@gmail.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Fix formatting
* Fix PVS-studio warnings
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* FuriHal: move furi_hal_gpio_get_ext_pin_number to resources
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* get rid of BSP layer
* sector_cache: init in any case
* new sd-spi driver: init
* Delete stm32_adafruit_sd.c.old
* Delete spi_sd_hal.c.old
* Storage: faster api lock primitive
* Threads: priority control
* Flags: correct error code
* Spi: dma mode
* SD-card: use DMA for big blocks of SPI data
* Fix wrong SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE value
* do not memset cache if it is NULL
* remove top-level timeouts
* sd hal: disable debug
* Furi HAL: DMA
* Furi HAL RFID: use furi_hal_dma
* Furi HAL DMA: tests
* Furi HAL DMA: docs
* rollback "Furi HAL RFID: use furi_hal_dma"
* 4 channels taken from DMA manager for core HAL.
* Furi HAL DMA: live fast, die young
* RPC tests: increase message buffer
* SPI HAL: use second DMA instance
* sd hal: new CID getter
* SPI hal: use non-DMA version if kernel is not running
* IR hal: generalize DMA definition
* storage: add CID data to sd info
* RFID hal: generalize DMA definition
* SUBGHZ hal: generalize DMA definition. Core hal moved to DMA2.
* Storage: small optimizations, removal of extra mutex
* Storage: redundant macro
* SD hal: more timeouts
* SPI hal: DMA init
* Target: make furi_hal_spi_dma_init symbol private
* Update F18 api symbols
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Assets: png images for F1..F12 keys: Will be used for HID keyboard layout
* HID KEYBOARD F1..F12 keys were added
- a new row with functional keys was added
- logic for displaying the keyboard layout was improved
* HidApp: hid functional keys by default
Co-authored-by: あく <alleteam@gmail.com>
* NFC: fix creating MF Classic cards from "Add Manually" menu (BCC calculation and AQTA/SAK writing)
* NFC: Fix BCC/SAK/ATQA in unit_tests and SAK in nfc_generate_mf_classic
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* NFC: add MIFARE MINI support
* Move new value to end of enum
* nfc: added missing unit test
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Toolbox: add seek to character stream method. UpdateUtils: reverse manifest iterator. UnitTests: more unit tests.
* Target: bump API version. Updater: delete empty folders from manifest before resource deployment.
* UnitTests: use manifest from unit_tests folder instead of global one
* Make PVS happy
* sector cache: allocate always
* Better PVS config for manifest.c
* PVS: Move exception outside of condition
* PVS: remove confusing condition
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* GUI: Refactor submenu to internally use FuriStrings
* NFC: Rework DESFIRE dynamic info submenu
* GUI: don't mutate label when drawing submenu
* Get rid of submenu_add_item_cstr
* increase api version
* Get rid of submenu_set_header_cstr
* rollback api version
* Documentation
* RFID: use new submenu api
Co-authored-by: Sergey Gavrilov <who.just.the.doctor@gmail.com>
* Change the wording in the headers
* Add support for text in the progress bar
* New MFC key bruteforce screen
* Typo fix
* nfc: rename Flipper Dict to System Dict
* elements: fix types
* Display the correct key attack sector
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGHZ unit test: fail if async_tx is not started
* Memgr unit test: fix for multithreaded enviroment
* Unit tests: fix failed_tests count
* Unit tests: remove debug code
* Double update test: increase flipper detection time
Co-authored-by: あく <alleteam@gmail.com>
