* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
* NFC: fix memory corruption in nfc_worker_read_mifare_desfire
* NFC: if the NFC tag doesn't have apps or files, don't try to save them.
* NFC: make-format
Co-authored-by: Jack Doan <jackdoan@rivian.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
Co-authored-by: Nikolay Minaylov <nm29719@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* WIP on stripping fw
* Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0
* Fixed uninitialized storage struct; small fixes to compact fw
* Flasher srv w/mocked flash ops
* Fixed typos & accomodated FFF changes
* Alternative fw startup branch
* Working load & jmp to RAM fw
* +manifest processing for stage loader; + crc verification for stage payload
* Fixed questionable code & potential leaks
* Lowered screen update rate; added radio stack update stubs; working dfu write
* Console EP with manifest & stage validation
* Added microtar lib; minor ui fixes for updater
* Removed microtar
* Removed mtar #2
* Added a better version of microtar
* TAR archive api; LFS backup & restore core
* Recursive backup/restore
* LFS worker thread
* Added system apps to loader - not visible in UI; full update process with restarts
* Typo fix
* Dropped BL & f6; tooling for updater WIP
* Minor py fixes
* Minor fixes to make it build after merge
* Ported flash workaround from BL + fixed visuals
* Minor cleanup
* Chmod + loader app search fix
* Python linter fix
* Removed usb stuff & float read support for staged loader == -10% of binary size
* Added backup/restore & update pb requests
* Added stub impl to RPC for backup/restore/update commands
* Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines
* Moved backup&restore to storage
* Fixed new message types
* Backup/restore/update RPC impl
* Moved furi_hal_crc to LL; minor fixes
* CRC HAL rework to LL
* Purging STM HAL
* Brought back minimal DFU boot mode (no gui); additional crc state checks
* Added splash screen, BROKEN usb function
* Clock init rework WIP
* Stripped graphics from DFU mode
* Temp fix for unused static fun
* WIP update picker - broken!
* Fixed UI
* Bumping version
* Fixed RTC setup
* Backup to update folder instead of ext root
* Removed unused scenes & more usb remnants from staged loader
* CI updates
* Fixed update bundle name
* Temporary restored USB handler
* Attempt to prevent .text corruption
* Comments on how I spent this Saturday
* Added update file icon
* Documentation updates
* Moved common code to lib folder
* Storage: more unit tests
* Storage: blocking dir open, differentiate file and dir when freed.
* Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value
* Removed re-init check for manifest
* Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py
* Increased update worker stack size
* Text fixes in backup CLI
* Displaying number of update stages to run; removed timeout in handling errors
* Bumping version
* Added thread cleanup for spawner thread
* Updated build targets to exclude firmware bundle from 'ALL'
* Fixed makefile for update_package; skipping VCP init for update mode (ugly)
* Switched github build from ALL to update_package
* Added +x for dist_update.sh
* Cli: add total heap size to "free" command
* Moved (RAM) suffix to build version instead of git commit no.
* DFU comment
* Some fixes suggested by clang-tidy
* Fixed recursive PREFIX macro
* Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays
* Github: correct build target name in firmware build
* FuriHal: move target switch to boot
* Makefile: fix firmware flash
* Furi, FuriHal: move kernel start to furi, early init
* Drop bootloader related stuff
* Drop cube. Drop bootloader linker script.
* Renamed update_hl, moved constants to #defines
* Moved update-related boot mode to separate bitfield
* Reworked updater cli to single entry point; fixed crash on tar cleanup
* Added Python replacement for dist shell scripts
* Linter fixes for dist.py +x
* Fixes for environment suffix
* Dropped bash scripts
* Added dirty build flag to version structure & interfaces
* Version string escapes
* Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program
* Fixed fw address in ReadMe.md
* Rpc: fix crash on double screen start
* Return back original boot behavior and fix jump to system bootloader
* Cleanup code, add error sequence for RTC
* Update firmware readme
* FuriHal: drop boot, restructure RTC registers usage and add header register check
* Furi goes first
* Toolchain: add ccache support
* Renamed update bundle dir
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2403] Changed (Name and save) buttons name
* [FL-2403] NFC Reading revert LED color to blue
* [FL-2438] Capital_letter_menu_names
* [FL-2438] Capital_letter_menu_names
* [FL-2438] Rename and unify menu items with capitals
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder_label
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder_label_reformating
Co-authored-by: あく <alleteam@gmail.com>
* Power info command, validator fixes
* strdup in validator, fix memory leak
* furi_hal_crypto fixed again
* FuriHal: limit ARR and CC in speaker hal
* FuriHal: LL_TIM_DisableAllOutputs in speaker stop
* Rpc: fix memory leak in screen streaming
* Get rid of crypto_enable/crypto_disable
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Fix TextBox word wrap behavior
* Wrap width is 120 pixels, not 140. (140 is larger than the screen!)
* Glyph width already includes spacing; don't add 1 additional px
* When starting a new line, include wrapped glyph width in new line_width.
* Call canvas_set_font before text_box_insert_endline so that glyph
width is calculated using correct font.
Previous approach worked somewhat well using default TextBoxFontText but
this version is more robust, particularly when using TextBoxFontHex.
* Add basic Mifare DESFire reading, file/app browser
* Fix build with APP_ARCHIVE=0
* Add bool type to flipper_format
* Add ability to save and load DESFire card data
* Skip over NfcSceneDeviceInfo when viewing saved DESFire info
* mf_df_clear: don't leak master key settings key versions
* When opening a DESFire card from Archive, retain UID emulation behavior
* rm unnecessary \r\n
* show Popup instead of leaving view in bad state
* Move NfcReaderRequestData out of union
This makes it safe to emulate DESFire/EMV without clobbering card data.
* Display saved DESFire cards via NfcSceneDeviceInfo
* Display and save file metadata even when contents are missing
This can happen when a file doesn't allow unauthenticated reads (see the
call to mf_df_parse_read_data_response in nfc_worker.c).
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Streams: string stream
* String stream: updated insert/delete api
* Streams: generic stream interface and string stream implementation
* Streams: helpers for insert and delete_and_insert
* FFF: now compatible with streams
* MinUnit: introduced tests with arguments
* FFF: stream access violation
* Streams: copy data between streams
* Streams: file stream
* FFF: documentation
* FFStream: documentation
* FFF: alloc as file
* MinUnit: support for nested tests
* Streams: changed delete_and_insert, now it returns success flag. Added ability dump stream inner parameters and data to cout.
* FFF: simplified file open function
* Streams: unit tests
* FFF: tests
* Streams: declare cache_size constant as define, to allow variable modified arrays
* FFF: lib moved to a separate folder
* iButton: new FFF
* RFID: new FFF
* Animations: new FFF
* IR: new FFF
* NFC: new FFF
* Flipper file format: delete lib
* U2F: new FFF
* Subghz: new FFF and streams
* Streams: read line
* Streams: split
* FuriCore: implement memset with extra asserts
* FuriCore: implement extra heap asserts without inventing memset
* Scene manager: protected access to the scene id stack with a size check
* NFC worker: dirty fix for issue where hal_nfc was busy on app start
* Furi: update allocator to erase memory on allocation. Replace furi_alloc with malloc.
* FuriCore: cleanup memmgr code.
* Furi HAL: furi_hal_init is split into critical and non-critical parts. The critical part is currently clock and console.
* Memmgr: added ability to track allocations and deallocations through console.
* FFStream: some speedup
* Streams, FF: minor fixes
* Tests: restore
* File stream: a slightly more thread-safe version of file_stream_delete_and_insert
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
* nfc: fix spaces between lines in delete and info scenes
* gui widget: add extern c
* ibutton: rework gui in info and delete scenes
* Loader, Desktop: fix debug apps and plugins start from cli, fix deadlock in archive
Co-authored-by: あく <alleteam@gmail.com>
* Lib: always include rfal
* Gui: remove screen_stream
* Input: decouple from Cli
* Loader: decouple from Cli
* Desktop: ignore missing favorite app, decouple from Archive
* Make: make Notification a Gui dependency
* Make: embed debugging information into elfs
* Loader: hide Plugins submenu when plugins ga arimasen
* Applications: update on start hook usage
* Loader: fix dead lock on menu rebuild with open rpc, new cli command.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-2010] furi-hal-vcp rework
* Fix connect state change on vcp enable
* New thread naming scheme and stack size adjustment.
* Applications: rename worker threads to match new naming scheme.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: allocate nfc device on heap
* nfc: rework save with flipper file format
* nfc: rework nfc device load with flipper file
* nfc: save AID length and data
* nfc: remove file worker usage
* nfc: format sources
* nfc: rework with flipper file format addons
* assets: update EMV resources with flipper file format
* nfc: rework EMV resources parsing with new file format
* assets: fix EMV AID file format
* nfc: fix nfc_device usage
Co-authored-by: あく <alleteam@gmail.com>
* canvas: add font parameters
* elements: add text box element
* widget: add text box element
* nfc: rework delete and info scene with text box widget
* gui: update documentation
* gui: fix canvas_get_font_params return
Co-authored-by: あく <alleteam@gmail.com>
* nfc: fix notifications in read EMV sequence
* nfc: set focus on previously saved card
* nfc: add incorrect file format message
* mifare ultralight: increase size of max dump
* elements: draw multiline text only until it fits screen
* nfc: support variable PAN number length
* nfc: change AID display
* nfc: change worker custom event to prevent scene reenter
* nfc: double check for PAN tag
* nfc: fix edit card name appearance
* Nfc: read EMV card without name if PDOL is present.
* Desktop: increase unlock key press interval, switch to OS ticks instead of HAL.
* Desktop: remove debug logging
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* WidGet: fix name Multiline String Element
* SubGhz: rename SubGhzProtocol to SubGhzParser and bring it up
* SubGhz: a new way to navigate in receiver views
* SubGhz: fix syntax
* WedGet: add forwarding input type to wedget button callback, fix using a callback in an application
* SubGhz: add assertions and status checks
* SubGhz: fix syntax
* [FL-1790] SubGhz: fix GateTX
* SubGhz: add 434.42 MHz frequency support
* SubGhz: rename type protocol, add decoder stage names
* SubGhz: fix navigation through received signals when changing scenes
* SubGhz: fix 2-fsk config
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* assets: add EMV AID table for NFC app
* file-worker: add searching for value by the key
* nfc: add emv parser helpers
* assets: add country and currency codes
* nfc: add country and currency code parsing
* emv_decoder: add country and currency code support
* nfc: add AID. currency and country display
* nfc: rework bank_card view
* nfc: add currency and country save
* assets: change emv chip asset
* nfc: change asset in bank card
* gui: add frame element to widget
* nfc: add bank card frame, add documentation
* rfal: fix long APDU command emulation
* nfc: fix typos
* Scripts ReadMe: assets delivery command
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
