still has problems, need to rewrite subghz_devices tx/rx switch code, checking strcmp every time is not good too, but better than loading whole config from microsd
* improve digital_signal for longer packets, also clean up code
* added SLIX2 specific features like signature and unknown keys (for issue #2781), added WRITE_PASSWORD handling
* fix NfcV AFI selection
* when NFCV_CMD_READ_MULTI_BLOCK reads beyond memory end, return the maximum possible block's content
* added SLIX2 reading
* fix NXP SYSTEMINFO response check size
* capture the first received password if none was set before
* clear stored data before reading SLIX details renamed slix2_dump functions to slix2_read
* display card block size values as decimal
Co-authored-by: あく <alleteam@gmail.com>
* added some extra timeouts, fixed duration of units run command and minor logging changes. No list_ports yet needed
* increased timeouts
* make pvs happy
---------
Co-authored-by: doomwastaken <k.volkov@flipperdevices.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Support for scroll acceleration
* Revert keyboard acceleration
* Add scroll acceleration to the text box
* Remove redundant code from the file manager input handler
* Archive: slightly better scrolling
* Gui,Archive: final version of accelerated scrolling
Co-authored-by: あく <alleteam@gmail.com>
* Emit error notification on memory full
* Set IDLE notification (led off) at Info scene if Memory Full
* Enable Rx notification and Rx after deletion of item after "Memory full" state
* added support for ISO15693 (NfcV) emulation, added support for reading SLIX tags
* SLIX: fixed crash situation when an invalid password was requested
* ISO15693: show emulate menu when opening file
* rename NfcV emulate scene to match other NfcV names
* optimize allocation size for signals
* ISO15693: further optimizations of allocation and free code
* ISO15693: reduce latency on state machine reset
* respond with block security status when option flag is set
* increased maximum memory size to match standard
added security status handling/load/save
added SELECT/QUIET handling
more fine grained allocation routines and checks
fix memset sizes
* added "Listen NfcV Reader" to sniff traffic from reader to card
* added correct description to delete menu
* also added DSFID/AFI handling and locking
* increase sniff log size
* scale NfcV frequency a bit, add echo mode, fix signal level at the end
* use symbolic modulated/unmodulated GPIO levels
* honor AFI field, decrease verbosity and removed debug code
* refactor defines for less namespace pollution by using NFCV_ prefixes
* correct an oversight that original cards return an generic error when addressing outside block range
* use inverse modulation, increasing readable range significantly
* rework and better document nfc chip initialization
* nfcv code review fixes
* Disable accidentally left on signal debug gpio output
* Improve NFCV Read/Info GUIs. Authored by @xMasterX, committed by @nvx
* Fix crash that occurs when you exit from NFCV emulation and start it again. Authored by @xMasterX, committed by @nvx
* Remove delay from emulation loop. This improves compatibility when the reader is Android.
* Lib: digital signal debug output pin info
Co-authored-by: Tiernan Messmer <tiernan.messmer@gmail.com>
Co-authored-by: MX <10697207+xMasterX@users.noreply.github.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Implement support for reading Opal card (Sydney, Australia)
* stub_parser_verify_read: used UNUSED macro
* furi_hal_rtc: expose calendaring as functions
* opal: use bit-packed struct to parse, rather than manually shifting about
* Update f18 api symbols
Co-authored-by: あく <alleteam@gmail.com>
* nfc: Add Mifare Ultralight C detection
* nfc: Add display name for MFUL C and hide menu items
MFUL C unlock and emulation currently not supported, so hide from menu
if current card is MFUL C
* nfc: Also check response when probing 3DES auth
* nfc: Hide emulate option in saved menu for MFUL if not supported
* nfc: Remove unlock options from saved menu if Ultralight C
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Add Mfkey32 application
* Fine tune RAM requirements, use FZ notification service API
* Fix PVS security warnings, fix issue with cracking keys on the FZ
* Prefer on-device or Flipper mobile app (seamless)
* Mfkey32: change app category to NFC
* Mfkey32: set target to f7 only
* Silence PVS false positives
* Correct PVS codes
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add SubGhzThresholdRssi
* SubGhz: remove direct reading of subghz-txrx-txrx_state
* SubGhz: remove direct reading subghz->txrx->hopper_state
* SubGhz: remove direct reading subghz->lock
* SubGhz: check load type file
* SubGhz: remove direct reading subghz->txrx->rx_key_state
* SubGhz: remove direct reading subghz->txrx->speaker_state
* SubGhz: refactoring subghz_scene_set_type.c
* SubGhz: moving "txrx" entity to a separate file
* SubGhz: show error tx start
* SubGhz: refactoring RPC
* SubGhz: value get optimizations
* SubGhz: fix name file
* SubGhz: add function description
* SubGhz: fix double back with a blocked transmission in this region and speacker, when a transmission is blocked in this region
* SubGhz: correct spelling
* SubGhz: better naming
* SubGhz: simplify includes
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Improve RNG error handling
* Sync RTC shadow registers on Stop mode exit
* Implement working STOP2 mode
* Fix formatting
* FuriHal: disable SWD pins if debug is disabled
* Power: cleanup battery info view, handle zero current report from gauge
* Fbt: add command line argument for extra global defines
* FuriHal: cleanup debug defines in power and os, drop deep_insomnia counter.
* Add a setting to disable deep sleep
* Clean up furi_hal_power
* FuriHal,FapLoader,Debug: implement debug in stop mode, workaround resume in stop
* FuriHal: document OS and power subsystems debugging
* Furi: enable debug interface on crash
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* AVR_ISP: fix NULL pointer dereference
* SubGhz: double back with a blocked transmission in this region
* SubGhz: fix speaker, when a transmission is blocked in this region
* SubGhz: fix speaker
* SubGhz: return region
* AVR Flasher: cleanup code
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Canvas with rotation
* Full icon rotation, cleanup of unused resources
* F18 API update
* Bitmap draw cleanup
* More cleaning up
* Migrate recovery and DFU to canvas
* Make the internal draw function static
* Remove all calls to u8g2_DrawXBM
Co-authored-by: あく <alleteam@gmail.com>
Add Back Button Functionality. Hold back button brings you to menu if there is a config for it there. If there is no config, press back brings you to menu
* debug: automated support for multiple debug symbol files
* faploader: extra checks for app list state
* debug: trigger BP before fap's EP if under debugger
* faploader, debug: better naming
* docs: info on load breakpoint
* faploader: header cleanup
* faploader: naming fixes
* debug: less verbose; setting debug flag more often
* typo fix
* updated parser and added stringln, hold and release
* removed unused code as requested from PR
* BadUsb: tiny change to trigger rebuild
Co-authored-by: p4p1 <p4p1@vivaldi.net>
Co-authored-by: あく <alleteam@gmail.com>
* Unify spelling of confirm exit/retry across apps.
* Unify infrared exit/retry confirm menus?
* "Keyboard Layout", not "Keyboard layout".
* Make iButton read scene prompt less awkward.
* "Detect Reader" in MF Classic saved menu instead of "Detect reader"
* NFC menu spelling changes only.
* Remove \n in strings in widget_add_string_element() calls.
Co-authored-by: あく <alleteam@gmail.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* Temporary get Metakom and Cyfral keys out of the way
* Better enum name
* Syncing work, does not compile
* Syncing work, now compiles
* Working read impl for DS1990 and DS1992
* Add the ability to display extended key data
* Get rid of DialogEx
* Add save and load API
* Better iButtonKey encapsulation
* Fix crash
* Load key code boilerplate
* More load key code boilerplate
* Minor code cleanup
* Implement loading and saving DS1990 keys
* Implement the Info scene
* Implement loading & saving for DS1992
* Implement read error scene stub
* Implement delete confirmation screen
* Better error messages (protocol-dependent)
* Minor old code cleanup
* Remove iButtonDevice, add command callback to iButtonSlave
* Implement draft emulation for DS1990
* Better emulation for DS1990
* Initial emulation implementation for DS1992
* Better common command definitions
* Use common submenu callback, add protocol list
* Improve ViewData screen
* Improve scene_add_type
* Add stubs for write functionality
* Improve naming consistency
* Implement writing a DS1992 onto another one
* Improve DS1992 write code
* Improve DS1992 write code once more
* Prepare write_blank for DS1990, delete ibutton_writer
* Implement writing DS1990 onto blanks
* Fix reading DS1990
* Partially implement writing DS1992 onto blanks
* Implement GUI for writing keys
* Implement GUI for emulating keys
* Reduce memory usage for pretty_format
* Automatically truncate data more than 256 bytes
* Initial implementation of DS1996 (not tested)
* Fix crash due to missing virtual function
* Improve emulation code
* Improve DS1992 emulation code
* Correct return value for onewire_slave_send
* Correct return value for onewire_slave_receive
* Implement emulation for DS1992 & DS1996
* Better constant names
* Simplify & optimise the emulation code
* Remove duplicate code
* Add skip rom command emulation
* Show loading animation for large keys
* Implement manual adding & editing of keys
* Use buffered file streams to speed up saving & loading
* Reset key name before adding a new one
* Sync a buffered file stream before saving
* Use the DSGeneric protocol as a fallback option
* Implement emulation via RPC
* Refactor iButton code in preparation for comparator keys
* Refactor iButton code in preparation for comparator keys once more
* Make some functions static
* Make protocols not rely on one_wire classes
* Improve ProtocolDict usage
* Improve ProtocolDict usage more
* Implement reading Metakom & Cyfral keys
* Rename some files
* Better file structure
* Implement a unified interface for misc protocols
* Implement a unified interface for dallas protocols
* Concrete types for Dallas protocols
* Implement a unified interface for all key types
* Improved type naming
* Improved private types
* Proper types in protocol definitions
* Implement emulation for Cyfral & Metakom keys
* Implement save&load for Metakom & Cyfral keys
* Better type names
* Rename files, better names
* Allocate iButtonProtocols like a normal class
* Reset the key each time the start scene is selected
* Improve comments and constants
* Add ibutton_protocols to SDK headers
* Add ibutton_key to SDK headers
* Add ibutton_key to SDK headers
* Implement reading via cli
* Implement emulation via cli
* Implement writing Dallas blanks via cli
* Correctly revert the editing if cancelled by the user
* Correct committing mishap
* Elide the long text on the info screen
* Change key name for data in Misc keys
* Update iButtonFileFormat.md
* Remember the key's folder
* Save menu position in ReadKeyMenu and SavedKeyMenu
* Correct use of preselected path in file browser
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Threads: application id
* Unit tests: appsdata getter test
* Unit tests: moar test cases for appsdata getter
* Unit tests: remove folders after test
* Storage: dir_is_exist, migrate, + unit_tests
* Plugins: migration
* Storage: common_exists, moar unit_tests 4 "common_migrate", "common_migrate" and "common_merge" bugfixes
* Storage: use FuriString for path handling
* Storage API: send caller thread id with path
* Storage: remove StorageType field in storage file list
* Storage: simplify processing
* Storage API: send caller thread id with path everywhere
* Storage: /app alias, unit tests and path creation
* Storage, path helper: remove unused
* Examples: app data example
* App plugins: use new VFS path
* Storage: file_info_is_dir
* Services: handle alias if the service accepts a path.
* App plugins: fixes
* Make PVS happy
* Storage: fix storage_merge_recursive
* Storage: rename process_aliases to resolve_path. Rename APPS_DATA to APP_DATA.
* Apps: use predefined macro instead of raw paths. Example Apps Data: README fixes.
* Storage: rename storage_common_resolve_path to storage_common_resolve_path_and_ensure_app_directory
* Api: fix version
* Storage: rename alias message
* Storage: do not create app folders in path resolving process in certain cases.
---------
Co-authored-by: Astra <93453568+Astrrra@users.noreply.github.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Remove unused imports and remove my old code that used to hide layouts and tmp history folders, this was removed in dev but somehow was added back here
BUG: Now sound works but sending signal with sound on doesn't actually send signal!!!
Need to return previous implementation with 2 channel Timer or find another way
* SubGhz: add protocol DataRAW (binarization of data quantized by the minimum correlated duration)
* SubGhz: fix name history
* SubGhz: add encoder Data_RAW protocol
* SubGhz: decreasing the size of the LevelDuration structure
* SubGhz: history, added check that there is free RAM
* SubGhz: checking for free memory, support to pass without gap
* SubGhz: add running average to average the result, auto cut noise at the end of a burst
* SubGhz: support for repeating sequences
* SubGhz: fix secplus_v2 decoder
* SubGhz: bin_RAW fix add history
* SubGhz: add debug
* SubGhz: debug refactoring
* FURI_LOG: add FURI_LOG_RAW_x formatted string output like printf
* SubGhz: fix new FURI_LOG metod
* FURI_LOG: fix unit test
* SubGhz: add enable/disable BinRAW protocol decoding
* SubGhz: fix PVS
* SubGhz: forcibly turn off the speaker when exiting SubGhz
* SubGhz: adaptive adjustment to the noise level
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Fix recording RAW files, sometimes could not start at a high level
* SubGhz: subghz_worker, add short duration filter setting
* SubGhz: capture raw timings in cli. Furi: clear pending interrupts on ISR set/reset
* SubGhz: fix start duration in furi_hal_subghz_start_async_rx
* [FL-3093] SubGhz: hopping issue in some regions
* [FL-3087] SubGhz: fix delete-ok issue
* SubGhz: remove copypasta from rx_raw cli command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Changed blue LED to cyan in NFC Magic and Picopass apps.
* Fix capitalization of ATQA and UID in NFC Add Manually wizard.
* Fix reselection of "Saved" menu item in NFC and RFID apps.
* Fix double back press after deleting a file in the SubGhz browser.
* Make NFC app behave like other apps: return to the file browser after deleting a file.
* Rename NfcSceneSetAtqua to NfcSceneSetAtqa.
* Save selected menu items in NFC Magic and Picopass apps in a way that always works.
* Restore previous selection in Universal Remotes menu.
* Other way to do universal remote menu saving, and NFC Extra Actions saves last selection.
Co-authored-by: あく <alleteam@gmail.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Fix formatting
* Fix PVS-studio warnings
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* FuriHal: move furi_hal_gpio_get_ext_pin_number to resources
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
It was possible to set it to external module without module connected, and as it saves its state in memory, all other plugins that uses subghz will not work, now we checking for module when you changing that setting
Enough, it will not be enabled back, do not ask for it, its efficiency is almost 0, if you didn’t know it looses signals and all that you can capture is a micro part of end of the signal
Detect raw also will be removed in a future (and replaced with more correct solution)
Available to configure: datarate, bandwidth and manchester decoding flag
log ability added to unit_test app (it's very helpful when writing a unit_tests)
* GUI: Refactor submenu to internally use FuriStrings
* NFC: Rework DESFIRE dynamic info submenu
* GUI: don't mutate label when drawing submenu
* Get rid of submenu_add_item_cstr
* increase api version
* Get rid of submenu_set_header_cstr
* rollback api version
* Documentation
* RFID: use new submenu api
Co-authored-by: Sergey Gavrilov <who.just.the.doctor@gmail.com>
* Change the wording in the headers
* Add support for text in the progress bar
* New MFC key bruteforce screen
* Typo fix
* nfc: rename Flipper Dict to System Dict
* elements: fix types
* Display the correct key attack sector
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
