2022-01-05 16:10:18 +00:00
|
|
|
#include <furi_hal_rtc.h>
|
2022-04-13 20:50:25 +00:00
|
|
|
#include <furi_hal_light.h>
|
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
|
|
|
#include <furi_hal_debug.h>
|
2024-01-15 23:09:37 +00:00
|
|
|
#include <furi_hal_serial_control.h>
|
2022-04-13 20:50:25 +00:00
|
|
|
|
|
|
|
#include <stm32wbxx_ll_pwr.h>
|
2023-05-29 16:05:57 +00:00
|
|
|
#include <stm32wbxx_ll_bus.h>
|
2021-12-14 22:39:59 +00:00
|
|
|
#include <stm32wbxx_ll_rcc.h>
|
|
|
|
#include <stm32wbxx_ll_rtc.h>
|
2022-04-13 20:50:25 +00:00
|
|
|
#include <stm32wbxx_ll_utils.h>
|
2021-12-14 22:39:59 +00:00
|
|
|
|
|
|
|
#include <furi.h>
|
|
|
|
|
|
|
|
#define TAG "FuriHalRtc"
|
|
|
|
|
2022-07-04 14:26:02 +00:00
|
|
|
#define FURI_HAL_RTC_LSE_STARTUP_TIME 300
|
|
|
|
|
|
|
|
#define FURI_HAL_RTC_CLOCK_IS_READY() (LL_RCC_LSE_IsReady() && LL_RCC_LSI1_IsReady())
|
2022-04-13 20:50:25 +00:00
|
|
|
|
|
|
|
#define FURI_HAL_RTC_HEADER_MAGIC 0x10F1
|
|
|
|
#define FURI_HAL_RTC_HEADER_VERSION 0
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
uint16_t magic;
|
|
|
|
uint8_t version;
|
|
|
|
uint8_t unused;
|
|
|
|
} FuriHalRtcHeader;
|
|
|
|
|
2021-12-14 22:39:59 +00:00
|
|
|
typedef struct {
|
2022-01-05 16:10:18 +00:00
|
|
|
uint8_t log_level : 4;
|
|
|
|
uint8_t log_reserved : 4;
|
2021-12-14 22:39:59 +00:00
|
|
|
uint8_t flags;
|
2022-12-19 09:38:20 +00:00
|
|
|
FuriHalRtcBootMode boot_mode : 4;
|
|
|
|
FuriHalRtcHeapTrackMode heap_track_mode : 2;
|
|
|
|
FuriHalRtcLocaleUnits locale_units : 1;
|
|
|
|
FuriHalRtcLocaleTimeFormat locale_timeformat : 1;
|
|
|
|
FuriHalRtcLocaleDateFormat locale_dateformat : 2;
|
2024-01-15 23:09:37 +00:00
|
|
|
FuriHalRtcLogDevice log_device : 2;
|
|
|
|
FuriHalRtcLogBaudRate log_baud_rate : 3;
|
|
|
|
uint8_t reserved : 1;
|
2022-12-19 09:38:20 +00:00
|
|
|
} SystemReg;
|
2021-12-14 22:39:59 +00:00
|
|
|
|
2022-12-19 09:38:20 +00:00
|
|
|
_Static_assert(sizeof(SystemReg) == 4, "SystemReg size mismatch");
|
2021-12-24 14:33:58 +00:00
|
|
|
|
2024-01-15 23:09:37 +00:00
|
|
|
static const FuriHalSerialId furi_hal_rtc_log_devices[] = {
|
|
|
|
[FuriHalRtcLogDeviceUsart] = FuriHalSerialIdUsart,
|
|
|
|
[FuriHalRtcLogDeviceLpuart] = FuriHalSerialIdLpuart,
|
|
|
|
[FuriHalRtcLogDeviceReserved] = FuriHalSerialIdMax,
|
|
|
|
[FuriHalRtcLogDeviceNone] = FuriHalSerialIdMax,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const uint32_t furi_hal_rtc_log_baud_rates[] = {
|
|
|
|
[FuriHalRtcLogBaudRate230400] = 230400,
|
|
|
|
[FuriHalRtcLogBaudRate9600] = 9600,
|
|
|
|
[FuriHalRtcLogBaudRate38400] = 38400,
|
|
|
|
[FuriHalRtcLogBaudRate57600] = 57600,
|
|
|
|
[FuriHalRtcLogBaudRate115200] = 115200,
|
|
|
|
[FuriHalRtcLogBaudRate460800] = 460800,
|
|
|
|
[FuriHalRtcLogBaudRate921600] = 921600,
|
|
|
|
[FuriHalRtcLogBaudRate1843200] = 1843200,
|
|
|
|
};
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
static void furi_hal_rtc_reset(void) {
|
2022-07-04 14:26:02 +00:00
|
|
|
LL_RCC_ForceBackupDomainReset();
|
|
|
|
LL_RCC_ReleaseBackupDomainReset();
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
static bool furi_hal_rtc_start_clock_and_switch(void) {
|
2022-07-04 14:26:02 +00:00
|
|
|
// Clock operation require access to Backup Domain
|
2022-04-13 20:50:25 +00:00
|
|
|
LL_PWR_EnableBkUpAccess();
|
2022-07-04 14:26:02 +00:00
|
|
|
|
|
|
|
// Enable LSI and LSE
|
|
|
|
LL_RCC_LSI1_Enable();
|
|
|
|
LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_HIGH);
|
|
|
|
LL_RCC_LSE_Enable();
|
|
|
|
|
|
|
|
// Wait for LSI and LSE startup
|
|
|
|
uint32_t c = 0;
|
|
|
|
while(!FURI_HAL_RTC_CLOCK_IS_READY() && c < FURI_HAL_RTC_LSE_STARTUP_TIME) {
|
|
|
|
LL_mDelay(1);
|
|
|
|
c++;
|
|
|
|
}
|
|
|
|
|
|
|
|
if(FURI_HAL_RTC_CLOCK_IS_READY()) {
|
2022-04-13 20:50:25 +00:00
|
|
|
LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
|
2022-07-04 14:26:02 +00:00
|
|
|
LL_RCC_EnableRTC();
|
|
|
|
return LL_RCC_GetRTCClockSource() == LL_RCC_RTC_CLKSOURCE_LSE;
|
|
|
|
} else {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
static void furi_hal_rtc_recover(void) {
|
2024-02-15 03:44:41 +00:00
|
|
|
DateTime datetime = {0};
|
2022-07-04 14:26:02 +00:00
|
|
|
|
|
|
|
// Handle fixable LSE failure
|
|
|
|
if(LL_RCC_LSE_IsCSSDetected()) {
|
|
|
|
furi_hal_light_sequence("rgb B");
|
|
|
|
// Shutdown LSE and LSECSS
|
|
|
|
LL_RCC_LSE_DisableCSS();
|
|
|
|
LL_RCC_LSE_Disable();
|
|
|
|
} else {
|
|
|
|
furi_hal_light_sequence("rgb R");
|
2022-04-13 20:50:25 +00:00
|
|
|
}
|
2022-07-04 14:26:02 +00:00
|
|
|
|
|
|
|
// Temporary switch to LSI
|
|
|
|
LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSI);
|
|
|
|
if(LL_RCC_GetRTCClockSource() == LL_RCC_RTC_CLKSOURCE_LSI) {
|
|
|
|
// Get datetime before RTC Domain reset
|
|
|
|
furi_hal_rtc_get_datetime(&datetime);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reset RTC Domain
|
|
|
|
furi_hal_rtc_reset();
|
|
|
|
|
|
|
|
// Start Clock
|
|
|
|
if(!furi_hal_rtc_start_clock_and_switch()) {
|
|
|
|
// Plan C: reset RTC and restart
|
|
|
|
furi_hal_light_sequence("rgb R.r.R.r.R.r");
|
|
|
|
furi_hal_rtc_reset();
|
|
|
|
NVIC_SystemReset();
|
|
|
|
}
|
|
|
|
|
|
|
|
// Set date if it valid
|
|
|
|
if(datetime.year != 0) {
|
|
|
|
furi_hal_rtc_set_datetime(&datetime);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
void furi_hal_rtc_init_early(void) {
|
2022-07-04 14:26:02 +00:00
|
|
|
// Enable RTCAPB clock
|
2022-04-13 20:50:25 +00:00
|
|
|
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB);
|
|
|
|
|
2022-07-04 14:26:02 +00:00
|
|
|
// Prepare clock
|
|
|
|
if(!furi_hal_rtc_start_clock_and_switch()) {
|
|
|
|
// Plan B: try to recover
|
|
|
|
furi_hal_rtc_recover();
|
|
|
|
}
|
|
|
|
|
2022-04-13 20:50:25 +00:00
|
|
|
// Verify header register
|
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterHeader);
|
|
|
|
FuriHalRtcHeader* data = (FuriHalRtcHeader*)&data_reg;
|
|
|
|
if(data->magic != FURI_HAL_RTC_HEADER_MAGIC || data->version != FURI_HAL_RTC_HEADER_VERSION) {
|
2023-12-12 15:12:57 +00:00
|
|
|
furi_hal_rtc_reset_registers();
|
2022-04-13 20:50:25 +00:00
|
|
|
}
|
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
|
|
|
|
|
|
|
if(furi_hal_rtc_is_flag_set(FuriHalRtcFlagDebug)) {
|
|
|
|
furi_hal_debug_enable();
|
|
|
|
} else {
|
|
|
|
furi_hal_debug_disable();
|
|
|
|
}
|
2022-04-13 20:50:25 +00:00
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
void furi_hal_rtc_deinit_early(void) {
|
2022-04-13 20:50:25 +00:00
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
void furi_hal_rtc_init(void) {
|
2022-12-26 12:13:30 +00:00
|
|
|
LL_RTC_InitTypeDef RTC_InitStruct;
|
2021-12-14 22:39:59 +00:00
|
|
|
RTC_InitStruct.HourFormat = LL_RTC_HOURFORMAT_24HOUR;
|
|
|
|
RTC_InitStruct.AsynchPrescaler = 127;
|
|
|
|
RTC_InitStruct.SynchPrescaler = 255;
|
|
|
|
LL_RTC_Init(RTC, &RTC_InitStruct);
|
|
|
|
|
|
|
|
furi_log_set_level(furi_hal_rtc_get_log_level());
|
2024-01-15 23:09:37 +00:00
|
|
|
furi_hal_serial_control_set_logging_config(
|
|
|
|
furi_hal_rtc_log_devices[furi_hal_rtc_get_log_device()],
|
|
|
|
furi_hal_rtc_log_baud_rates[furi_hal_rtc_get_log_baud_rate()]);
|
2021-12-14 22:39:59 +00:00
|
|
|
|
|
|
|
FURI_LOG_I(TAG, "Init OK");
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
void furi_hal_rtc_sync_shadow(void) {
|
2023-04-13 14:47:38 +00:00
|
|
|
if(!LL_RTC_IsShadowRegBypassEnabled(RTC)) {
|
|
|
|
LL_RTC_ClearFlag_RS(RTC);
|
|
|
|
while(!LL_RTC_IsActiveFlag_RS(RTC)) {
|
|
|
|
};
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
void furi_hal_rtc_reset_registers(void) {
|
2023-12-12 15:12:57 +00:00
|
|
|
for(size_t i = 0; i < RTC_BKP_NUMBER; i++) {
|
|
|
|
furi_hal_rtc_set_register(i, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
uint32_t data_reg = 0;
|
|
|
|
FuriHalRtcHeader* data = (FuriHalRtcHeader*)&data_reg;
|
|
|
|
data->magic = FURI_HAL_RTC_HEADER_MAGIC;
|
|
|
|
data->version = FURI_HAL_RTC_HEADER_VERSION;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterHeader, data_reg);
|
|
|
|
}
|
|
|
|
|
2021-12-24 14:33:58 +00:00
|
|
|
uint32_t furi_hal_rtc_get_register(FuriHalRtcRegister reg) {
|
|
|
|
return LL_RTC_BAK_GetRegister(RTC, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
void furi_hal_rtc_set_register(FuriHalRtcRegister reg, uint32_t value) {
|
|
|
|
LL_RTC_BAK_SetRegister(RTC, reg, value);
|
|
|
|
}
|
|
|
|
|
2021-12-14 22:39:59 +00:00
|
|
|
void furi_hal_rtc_set_log_level(uint8_t level) {
|
2021-12-24 14:33:58 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
2021-12-24 14:33:58 +00:00
|
|
|
data->log_level = level;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
2021-12-14 22:39:59 +00:00
|
|
|
furi_log_set_level(level);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
uint8_t furi_hal_rtc_get_log_level(void) {
|
2021-12-24 14:33:58 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
2021-12-24 14:33:58 +00:00
|
|
|
return data->log_level;
|
2021-12-14 22:39:59 +00:00
|
|
|
}
|
|
|
|
|
2024-01-15 23:09:37 +00:00
|
|
|
void furi_hal_rtc_set_log_device(FuriHalRtcLogDevice device) {
|
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
data->log_device = device;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
|
|
|
|
|
|
|
furi_hal_serial_control_set_logging_config(
|
|
|
|
furi_hal_rtc_log_devices[furi_hal_rtc_get_log_device()],
|
|
|
|
furi_hal_rtc_log_baud_rates[furi_hal_rtc_get_log_baud_rate()]);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
FuriHalRtcLogDevice furi_hal_rtc_get_log_device(void) {
|
2024-01-15 23:09:37 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
return data->log_device;
|
|
|
|
}
|
|
|
|
|
|
|
|
void furi_hal_rtc_set_log_baud_rate(FuriHalRtcLogBaudRate baud_rate) {
|
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
data->log_baud_rate = baud_rate;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
|
|
|
|
|
|
|
furi_hal_serial_control_set_logging_config(
|
|
|
|
furi_hal_rtc_log_devices[furi_hal_rtc_get_log_device()],
|
|
|
|
furi_hal_rtc_log_baud_rates[furi_hal_rtc_get_log_baud_rate()]);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
FuriHalRtcLogBaudRate furi_hal_rtc_get_log_baud_rate(void) {
|
2024-01-15 23:09:37 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
return data->log_baud_rate;
|
|
|
|
}
|
|
|
|
|
2021-12-14 22:39:59 +00:00
|
|
|
void furi_hal_rtc_set_flag(FuriHalRtcFlag flag) {
|
2021-12-24 14:33:58 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
2021-12-24 14:33:58 +00:00
|
|
|
data->flags |= flag;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
|
|
|
|
|
|
|
if(flag & FuriHalRtcFlagDebug) {
|
|
|
|
furi_hal_debug_enable();
|
|
|
|
}
|
2021-12-14 22:39:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void furi_hal_rtc_reset_flag(FuriHalRtcFlag flag) {
|
2021-12-24 14:33:58 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
2021-12-24 14:33:58 +00:00
|
|
|
data->flags &= ~flag;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
|
|
|
|
|
|
|
if(flag & FuriHalRtcFlagDebug) {
|
|
|
|
furi_hal_debug_disable();
|
|
|
|
}
|
2021-12-14 22:39:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
bool furi_hal_rtc_is_flag_set(FuriHalRtcFlag flag) {
|
2021-12-24 14:33:58 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
2021-12-24 14:33:58 +00:00
|
|
|
return data->flags & flag;
|
2021-12-14 22:39:59 +00:00
|
|
|
}
|
|
|
|
|
2022-04-13 20:50:25 +00:00
|
|
|
void furi_hal_rtc_set_boot_mode(FuriHalRtcBootMode mode) {
|
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
2022-04-13 20:50:25 +00:00
|
|
|
data->boot_mode = mode;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
FuriHalRtcBootMode furi_hal_rtc_get_boot_mode(void) {
|
2022-04-13 20:50:25 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
return data->boot_mode;
|
2022-11-12 08:46:04 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void furi_hal_rtc_set_heap_track_mode(FuriHalRtcHeapTrackMode mode) {
|
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
2022-11-12 08:46:04 +00:00
|
|
|
data->heap_track_mode = mode;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
FuriHalRtcHeapTrackMode furi_hal_rtc_get_heap_track_mode(void) {
|
2022-11-12 08:46:04 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
2022-12-19 09:38:20 +00:00
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
return data->heap_track_mode;
|
|
|
|
}
|
|
|
|
|
|
|
|
void furi_hal_rtc_set_locale_units(FuriHalRtcLocaleUnits value) {
|
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
data->locale_units = value;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
FuriHalRtcLocaleUnits furi_hal_rtc_get_locale_units(void) {
|
2022-12-19 09:38:20 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
return data->locale_units;
|
|
|
|
}
|
|
|
|
|
|
|
|
void furi_hal_rtc_set_locale_timeformat(FuriHalRtcLocaleTimeFormat value) {
|
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
data->locale_timeformat = value;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
FuriHalRtcLocaleTimeFormat furi_hal_rtc_get_locale_timeformat(void) {
|
2022-12-19 09:38:20 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
return data->locale_timeformat;
|
|
|
|
}
|
|
|
|
|
|
|
|
void furi_hal_rtc_set_locale_dateformat(FuriHalRtcLocaleDateFormat value) {
|
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
data->locale_dateformat = value;
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
FuriHalRtcLocaleDateFormat furi_hal_rtc_get_locale_dateformat(void) {
|
2022-12-19 09:38:20 +00:00
|
|
|
uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
|
|
|
|
SystemReg* data = (SystemReg*)&data_reg;
|
|
|
|
return data->locale_dateformat;
|
2022-04-13 20:50:25 +00:00
|
|
|
}
|
|
|
|
|
2024-02-15 03:44:41 +00:00
|
|
|
void furi_hal_rtc_set_datetime(DateTime* datetime) {
|
2023-04-01 13:50:30 +00:00
|
|
|
furi_check(!FURI_IS_IRQ_MODE());
|
2024-03-19 14:43:52 +00:00
|
|
|
furi_check(datetime);
|
2021-12-14 22:39:59 +00:00
|
|
|
|
2023-04-01 13:50:30 +00:00
|
|
|
FURI_CRITICAL_ENTER();
|
2021-12-14 22:39:59 +00:00
|
|
|
/* Disable write protection */
|
|
|
|
LL_RTC_DisableWriteProtection(RTC);
|
|
|
|
|
|
|
|
/* Enter Initialization mode and wait for INIT flag to be set */
|
|
|
|
LL_RTC_EnableInitMode(RTC);
|
2022-01-05 16:10:18 +00:00
|
|
|
while(!LL_RTC_IsActiveFlag_INIT(RTC)) {
|
|
|
|
}
|
2021-12-14 22:39:59 +00:00
|
|
|
|
|
|
|
/* Set time */
|
2022-01-05 16:10:18 +00:00
|
|
|
LL_RTC_TIME_Config(
|
|
|
|
RTC,
|
2021-12-14 22:39:59 +00:00
|
|
|
LL_RTC_TIME_FORMAT_AM_OR_24,
|
|
|
|
__LL_RTC_CONVERT_BIN2BCD(datetime->hour),
|
|
|
|
__LL_RTC_CONVERT_BIN2BCD(datetime->minute),
|
2022-01-05 16:10:18 +00:00
|
|
|
__LL_RTC_CONVERT_BIN2BCD(datetime->second));
|
2021-12-14 22:39:59 +00:00
|
|
|
|
|
|
|
/* Set date */
|
2022-01-05 16:10:18 +00:00
|
|
|
LL_RTC_DATE_Config(
|
|
|
|
RTC,
|
2021-12-14 22:39:59 +00:00
|
|
|
datetime->weekday,
|
|
|
|
__LL_RTC_CONVERT_BIN2BCD(datetime->day),
|
|
|
|
__LL_RTC_CONVERT_BIN2BCD(datetime->month),
|
2022-01-05 16:10:18 +00:00
|
|
|
__LL_RTC_CONVERT_BIN2BCD(datetime->year - 2000));
|
2021-12-14 22:39:59 +00:00
|
|
|
|
|
|
|
/* Exit Initialization mode */
|
|
|
|
LL_RTC_DisableInitMode(RTC);
|
|
|
|
|
2023-04-13 14:47:38 +00:00
|
|
|
furi_hal_rtc_sync_shadow();
|
2021-12-14 22:39:59 +00:00
|
|
|
|
|
|
|
/* Enable write protection */
|
|
|
|
LL_RTC_EnableWriteProtection(RTC);
|
2023-04-01 13:50:30 +00:00
|
|
|
FURI_CRITICAL_EXIT();
|
2021-12-14 22:39:59 +00:00
|
|
|
}
|
|
|
|
|
2024-02-15 03:44:41 +00:00
|
|
|
void furi_hal_rtc_get_datetime(DateTime* datetime) {
|
2023-04-01 13:50:30 +00:00
|
|
|
furi_check(!FURI_IS_IRQ_MODE());
|
2024-03-19 14:43:52 +00:00
|
|
|
furi_check(datetime);
|
2021-12-14 22:39:59 +00:00
|
|
|
|
2023-04-01 13:50:30 +00:00
|
|
|
FURI_CRITICAL_ENTER();
|
2021-12-14 22:39:59 +00:00
|
|
|
uint32_t time = LL_RTC_TIME_Get(RTC); // 0x00HHMMSS
|
|
|
|
uint32_t date = LL_RTC_DATE_Get(RTC); // 0xWWDDMMYY
|
2023-04-01 13:50:30 +00:00
|
|
|
FURI_CRITICAL_EXIT();
|
2021-12-14 22:39:59 +00:00
|
|
|
|
2022-01-05 16:10:18 +00:00
|
|
|
datetime->second = __LL_RTC_CONVERT_BCD2BIN((time >> 0) & 0xFF);
|
|
|
|
datetime->minute = __LL_RTC_CONVERT_BCD2BIN((time >> 8) & 0xFF);
|
|
|
|
datetime->hour = __LL_RTC_CONVERT_BCD2BIN((time >> 16) & 0xFF);
|
2021-12-14 22:39:59 +00:00
|
|
|
datetime->year = __LL_RTC_CONVERT_BCD2BIN((date >> 0) & 0xFF) + 2000;
|
|
|
|
datetime->month = __LL_RTC_CONVERT_BCD2BIN((date >> 8) & 0xFF);
|
|
|
|
datetime->day = __LL_RTC_CONVERT_BCD2BIN((date >> 16) & 0xFF);
|
|
|
|
datetime->weekday = __LL_RTC_CONVERT_BCD2BIN((date >> 24) & 0xFF);
|
|
|
|
}
|
2021-12-17 13:24:37 +00:00
|
|
|
|
2021-12-31 17:32:49 +00:00
|
|
|
void furi_hal_rtc_set_fault_data(uint32_t value) {
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterFaultData, value);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
uint32_t furi_hal_rtc_get_fault_data(void) {
|
2021-12-31 17:32:49 +00:00
|
|
|
return furi_hal_rtc_get_register(FuriHalRtcRegisterFaultData);
|
|
|
|
}
|
2022-02-10 18:17:41 +00:00
|
|
|
|
|
|
|
void furi_hal_rtc_set_pin_fails(uint32_t value) {
|
|
|
|
furi_hal_rtc_set_register(FuriHalRtcRegisterPinFails, value);
|
|
|
|
}
|
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
uint32_t furi_hal_rtc_get_pin_fails(void) {
|
2022-02-10 18:17:41 +00:00
|
|
|
return furi_hal_rtc_get_register(FuriHalRtcRegisterPinFails);
|
|
|
|
}
|
2022-05-19 19:53:33 +00:00
|
|
|
|
2024-03-19 14:43:52 +00:00
|
|
|
uint32_t furi_hal_rtc_get_timestamp(void) {
|
2024-02-15 03:44:41 +00:00
|
|
|
DateTime datetime = {0};
|
2022-11-04 05:26:04 +00:00
|
|
|
furi_hal_rtc_get_datetime(&datetime);
|
2024-02-15 03:44:41 +00:00
|
|
|
return datetime_datetime_to_timestamp(&datetime);
|
2023-05-29 11:55:55 +00:00
|
|
|
}
|