##### This software is for experimental purposes only and is not meant for any illegal activity/purposes. <br> We do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law. <br> Also, this software is made without any support from Flipper Devices and is in no way related to the official devs.
- **BadBT** plugin (BT version of BadKB) [(by Willy-JL, ClaraCrazy, XFW contributors)](https://github.com/ClaraCrazy/Flipper-Xtreme/tree/dev/applications/main/bad_kb) - (See in Applications->Tools) - (aka BadUSB via Bluetooth)
- Sub-GHz -> New frequency analyzer - [(by ClusterM)](https://github.com/DarkFlippers/unleashed-firmware/pull/43)
- Sub-GHz -> Save last used frequency [(by derskythe)](https://github.com/DarkFlippers/unleashed-firmware/pull/77)
- Sub-GHz -> Press OK in frequency analyzer to use detected frequency in Read modes [(by derskythe)](https://github.com/DarkFlippers/unleashed-firmware/pull/77)
- Sub-GHz -> Long press OK button in Sub-GHz Frequency analyzer to switch to Read menu [(by derskythe)](https://github.com/DarkFlippers/unleashed-firmware/pull/79)
- Lock device with pin(or regular lock if pin not set) by holding UP button on main screen [(by an4tur0r)](https://github.com/DarkFlippers/unleashed-firmware/pull/107)
* SubGHz -> New option to use timestamps + protocol name when you saving file, instead of random name - Enable in `Radio Settings -> Time in names = ON`
* SubGHz Bruteforcer plugin -> Time delay (between signals) setting (hold Up in main screen(says Up to Save)) + configure repeats in protocols list by pressing right button on selected protocol
* SubGHz -> **Custom buttons for Keeloq / Alutech AT4N / Nice Flor S / Somfy Telis / Security+ 2.0 / CAME Atomo** - now you can use arrow buttons to send signal with different button code
* SubGHz -> BFT Mitto / Somfy Telis / Nice Flor S / CAME Atomo, etc.. manual creation with programming new remote into receiver (use button 0xF for BFT Mitto, 0x8 (Prog) on Somfy Telis)
Keeloq [Not ALL systems supported for decode or emulation yet!] - [Supported manufacturers list](https://0bin.net/paste/VwR2lNJY#WH9vnPgvcp7w6zVKucFCuNREKAcOij8KsJ6vqLfMn3b)
Encoders or sending made by @Eng1n33r(first implementation in Q2 2022) &@xMasterX (current version):
- CAME Atomo -> Update! check out new [instructions](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/SubGHzRemoteProg.md)
- Nice Flor S -> How to create new remote - [instructions](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/SubGHzRemoteProg.md)
- Keeloq: BFT Mitto -> Update! check out new [instructions](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/SubGHzRemoteProg.md)
- Somfy Telis -> How to create new remote - [instructions](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/SubGHzRemoteProg.md)
- Alutech AT-4N -> How to create new remote - [instructions](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/SubGHzRemoteProg.md)
- Nice ON2E (Nice One) -> How to create new remote - [instructions](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/SubGHzRemoteProg.md)
Our team is small and the guys are working on this project as much as they can solely based on the enthusiasm they have for this project and the community.
- Community moderators in Telegram, Discord, and Reddit
- And of course our GitHub community. Your PRs are a very important part of this firmware and open-source development.
The amount of work done on this project is huge and we need your support, no matter how large or small. Even if you just say, "Thank you Unleashed firmware developers!" somewhere. Doing so will help us continue our work and will help drive us to make the firmware better every time.
Also, regarding our releases, every build has and always will be free and open-source. There will be no paywall releases or closed-source apps within the firmware. As long as I am working on this project it will never happen.
You can support us by using links or addresses below:
- WAV Player [(OFW: DrZlo13)](https://github.com/flipperdevices/flipperzero-firmware/tree/zlo/wav-player) - Fixed and improved by [LTVA1](https://github.com/LTVA1/wav_player) -> Also outputs audio on `PA6` - `3(A6)` pin
- ESP32: WiFi Marauder companion plugin [(by 0xchocolate)](https://github.com/0xchocolate/flipperzero-wifi-marauder) - Saving .pcap on flipper microSD [by tcpassos](https://github.com/tcpassos/flipperzero-firmware-with-wifi-marauder-companion) -> Only with custom marauder build (It is necessary to uncomment "#define WRITE_PACKETS_SERIAL" in configs.h (in marauder fw) and compile the firmware for the wifi board.) Or download precompiled build -> [Download esp32_marauder_ver_flipper_sd_serial.bin](https://github.com/justcallmekoko/ESP32Marauder/releases/latest)
- **BadBT** plugin (BT version of BadKB) [(by Willy-JL, ClaraCrazy, XFW contributors)](https://github.com/ClaraCrazy/Flipper-Xtreme/tree/dev/applications/main/bad_kb) (See in Applications->Tools) - (aka BadUSB via Bluetooth)
- **Mifare Nested** [(by AloneLiberty)](https://github.com/AloneLiberty/FlipperNested) - Works with PC and python app `FlipperNested`
- **NFC Maker** plugin (make tags with URLs, Wifi and other things) [(by Willy-JL)](https://github.com/ClaraCrazy/Flipper-Xtreme/tree/dev/applications/external/nfc_maker)
- Zombiez [(Reworked By DevMilanIan)](https://github.com/RogueMaster/flipperzero-firmware-wPlugins/pull/240) [(Original By Dooskington)](https://github.com/Dooskington/flipperzero-zombiez)
## [- How to make captures to add them into Universal IR remotes](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/InfraredCaptures.md)
## [- Transmission is blocked? - How to extend Sub-GHz frequency range](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/DangerousSettings.md)
## [- How to add extra Sub-GHz frequencies](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/SubGHzSettings.md)
## [- How to use Flipper as new remote (Nice FlorS, BFT Mitto, Somfy Telis, Aprimatic, AN-Motors, etc..)](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/SubGHzRemoteProg.md)
* Hello world - plugin tutorial (English): [https://github.com/DroomOne/Flipper-Plugin-Tutorial](https://github.com/DroomOne/Flipper-Plugin-Tutorial)
* Hello world - plugin tutorial (in Russian): [https://yakovlev.me/hello-flipper-zero/](https://yakovlev.me/hello-flipper-zero/)
* CLion IDE - How to setup workspace for flipper firmware development: [https://krasovs.ky/2022/11/01/flipper-zero-clion.html](https://krasovs.ky/2022/11/01/flipper-zero-clion.html)
* Docs by atmanos / How to write your own app (outdated API): [https://flipper.atmanos.com/docs/overview/intro](https://flipper.atmanos.com/docs/overview/intro)
