unleashed-firmware/firmware/targets/f7/furi_hal/furi_hal_usb.c

473 lines
13 KiB
C
Raw Normal View History

#include <furi_hal_version.h>
#include <furi_hal_usb_i.h>
#include <furi_hal_usb.h>
#include <furi_hal_power.h>
#include <stm32wbxx_ll_pwr.h>
#include <furi.h>
#include <toolbox/api_lock.h>
#include "usb.h"
#define TAG "FuriHalUsb"
#define USB_RECONNECT_DELAY 500
typedef enum {
UsbApiEventTypeSetConfig,
UsbApiEventTypeGetConfig,
UsbApiEventTypeLock,
UsbApiEventTypeUnlock,
UsbApiEventTypeIsLocked,
UsbApiEventTypeEnable,
UsbApiEventTypeDisable,
UsbApiEventTypeReinit,
UsbApiEventTypeSetStateCallback,
} UsbApiEventType;
typedef struct {
FuriHalUsbStateCallback callback;
void* context;
} UsbApiEventDataStateCallback;
typedef struct {
FuriHalUsbInterface* interface;
void* context;
} UsbApiEventDataInterface;
typedef union {
UsbApiEventDataStateCallback state_callback;
UsbApiEventDataInterface interface;
} UsbApiEventData;
typedef union {
bool bool_value;
void* void_value;
} UsbApiEventReturnData;
typedef struct {
FuriApiLock lock;
UsbApiEventType type;
UsbApiEventData data;
UsbApiEventReturnData* return_data;
} UsbApiEventMessage;
typedef struct {
FuriThread* thread;
FuriMessageQueue* queue;
bool enabled;
bool connected;
bool mode_lock;
bool request_pending;
FuriHalUsbInterface* interface;
void* interface_context;
FuriHalUsbStateCallback callback;
void* callback_context;
} UsbSrv;
typedef enum {
UsbEventReset = (1 << 0),
UsbEventRequest = (1 << 1),
UsbEventMessage = (1 << 2),
} UsbEvent;
#define USB_SRV_ALL_EVENTS (UsbEventReset | UsbEventRequest | UsbEventMessage)
PLACE_IN_SECTION("MB_MEM2") static UsbSrv usb = {0};
static const struct usb_string_descriptor dev_lang_desc = USB_ARRAY_DESC(USB_LANGID_ENG_US);
static uint32_t ubuf[0x20];
usbd_device udev;
static int32_t furi_hal_usb_thread(void* context);
static usbd_respond usb_descriptor_get(usbd_ctlreq* req, void** address, uint16_t* length);
static void reset_evt(usbd_device* dev, uint8_t event, uint8_t ep);
static void susp_evt(usbd_device* dev, uint8_t event, uint8_t ep);
static void wkup_evt(usbd_device* dev, uint8_t event, uint8_t ep);
/* Low-level init */
void furi_hal_usb_init(void) {
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
LL_PWR_EnableVddUSB();
GPIO_InitStruct.Pin = LL_GPIO_PIN_11 | LL_GPIO_PIN_12;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
GPIO_InitStruct.Alternate = LL_GPIO_AF_10;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
usbd_init(&udev, &usbd_hw, USB_EP0_SIZE, ubuf, sizeof(ubuf));
usbd_enable(&udev, true);
usbd_reg_descr(&udev, usb_descriptor_get);
usbd_reg_event(&udev, usbd_evt_susp, susp_evt);
usbd_reg_event(&udev, usbd_evt_wkup, wkup_evt);
// Reset callback will be enabled after first mode change to avoid getting false reset events
usb.enabled = false;
usb.interface = NULL;
NVIC_SetPriority(USB_LP_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 5, 0));
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
NVIC_SetPriority(USB_HP_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 15, 0));
NVIC_EnableIRQ(USB_LP_IRQn);
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
NVIC_EnableIRQ(USB_HP_IRQn);
usb.queue = furi_message_queue_alloc(1, sizeof(UsbApiEventMessage));
usb.thread = furi_thread_alloc_ex("UsbDriver", 1024, furi_hal_usb_thread, NULL);
furi_thread_mark_as_service(usb.thread);
furi_thread_start(usb.thread);
FURI_LOG_I(TAG, "Init OK");
}
static void furi_hal_usb_send_message(UsbApiEventMessage* message) {
furi_message_queue_put(usb.queue, message, FuriWaitForever);
furi_thread_flags_set(furi_thread_get_id(usb.thread), UsbEventMessage);
api_lock_wait_unlock_and_free(message->lock);
}
bool furi_hal_usb_set_config(FuriHalUsbInterface* new_if, void* ctx) {
UsbApiEventReturnData return_data = {
.bool_value = false,
};
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeSetConfig,
.data.interface =
{
.interface = new_if,
.context = ctx,
},
.return_data = &return_data,
};
furi_hal_usb_send_message(&msg);
return return_data.bool_value;
}
FuriHalUsbInterface* furi_hal_usb_get_config() {
UsbApiEventReturnData return_data = {
.void_value = NULL,
};
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeGetConfig,
.return_data = &return_data,
};
furi_hal_usb_send_message(&msg);
return return_data.void_value;
}
void furi_hal_usb_lock() {
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeLock,
};
furi_hal_usb_send_message(&msg);
}
void furi_hal_usb_unlock() {
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeUnlock,
};
furi_hal_usb_send_message(&msg);
}
bool furi_hal_usb_is_locked() {
UsbApiEventReturnData return_data = {
.bool_value = false,
};
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeIsLocked,
.return_data = &return_data,
};
furi_hal_usb_send_message(&msg);
return return_data.bool_value;
}
void furi_hal_usb_disable() {
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeDisable,
};
furi_hal_usb_send_message(&msg);
}
void furi_hal_usb_enable() {
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeEnable,
};
furi_hal_usb_send_message(&msg);
}
void furi_hal_usb_reinit() {
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeReinit,
};
furi_hal_usb_send_message(&msg);
}
void furi_hal_usb_set_state_callback(FuriHalUsbStateCallback cb, void* ctx) {
UsbApiEventMessage msg = {
.lock = api_lock_alloc_locked(),
.type = UsbApiEventTypeSetStateCallback,
.data.state_callback =
{
.callback = cb,
.context = ctx,
},
};
furi_hal_usb_send_message(&msg);
}
/* Get device / configuration descriptors */
static usbd_respond usb_descriptor_get(usbd_ctlreq* req, void** address, uint16_t* length) {
const uint8_t dtype = req->wValue >> 8;
const uint8_t dnumber = req->wValue & 0xFF;
const void* desc;
uint16_t len = 0;
if(usb.interface == NULL) return usbd_fail;
switch(dtype) {
case USB_DTYPE_DEVICE:
furi_thread_flags_set(furi_thread_get_id(usb.thread), UsbEventRequest);
if(usb.callback != NULL) {
usb.callback(FuriHalUsbStateEventDescriptorRequest, usb.callback_context);
}
desc = usb.interface->dev_descr;
break;
case USB_DTYPE_CONFIGURATION:
desc = usb.interface->cfg_descr;
len = ((struct usb_string_descriptor*)(usb.interface->cfg_descr))->wString[0];
break;
case USB_DTYPE_STRING:
if(dnumber == UsbDevLang) {
desc = &dev_lang_desc;
} else if((dnumber == UsbDevManuf) && (usb.interface->str_manuf_descr != NULL)) {
desc = usb.interface->str_manuf_descr;
} else if((dnumber == UsbDevProduct) && (usb.interface->str_prod_descr != NULL)) {
desc = usb.interface->str_prod_descr;
} else if((dnumber == UsbDevSerial) && (usb.interface->str_serial_descr != NULL)) {
desc = usb.interface->str_serial_descr;
} else
return usbd_fail;
break;
default:
return usbd_fail;
}
if(desc == NULL) return usbd_fail;
if(len == 0) {
len = ((struct usb_header_descriptor*)desc)->bLength;
}
*address = (void*)desc;
*length = len;
return usbd_ack;
}
static void reset_evt(usbd_device* dev, uint8_t event, uint8_t ep) {
UNUSED(dev);
UNUSED(event);
UNUSED(ep);
furi_thread_flags_set(furi_thread_get_id(usb.thread), UsbEventReset);
if(usb.callback != NULL) {
usb.callback(FuriHalUsbStateEventReset, usb.callback_context);
}
}
static void susp_evt(usbd_device* dev, uint8_t event, uint8_t ep) {
UNUSED(dev);
UNUSED(event);
UNUSED(ep);
if((usb.interface != NULL) && (usb.connected == true)) {
usb.connected = false;
usb.interface->suspend(&udev);
furi_hal_power_insomnia_exit();
}
if(usb.callback != NULL) {
usb.callback(FuriHalUsbStateEventSuspend, usb.callback_context);
}
}
static void wkup_evt(usbd_device* dev, uint8_t event, uint8_t ep) {
UNUSED(dev);
UNUSED(event);
UNUSED(ep);
if((usb.interface != NULL) && (usb.connected == false)) {
usb.connected = true;
usb.interface->wakeup(&udev);
furi_hal_power_insomnia_enter();
}
if(usb.callback != NULL) {
usb.callback(FuriHalUsbStateEventWakeup, usb.callback_context);
}
}
static void usb_process_mode_start(FuriHalUsbInterface* interface, void* context) {
if(usb.interface != NULL) {
usb.interface->deinit(&udev);
}
__disable_irq();
usb.interface = interface;
usb.interface_context = context;
__enable_irq();
if(interface != NULL) {
interface->init(&udev, interface, context);
usbd_reg_event(&udev, usbd_evt_reset, reset_evt);
FURI_LOG_I(TAG, "USB Mode change done");
usb.enabled = true;
}
}
static void usb_process_mode_change(FuriHalUsbInterface* interface, void* context) {
if(interface != usb.interface) {
if(usb.enabled) {
// Disable current interface
susp_evt(&udev, 0, 0);
usbd_connect(&udev, false);
usb.enabled = false;
furi_delay_ms(USB_RECONNECT_DELAY);
}
usb_process_mode_start(interface, context);
}
}
static void usb_process_mode_reinit() {
// Temporary disable callback to avoid getting false reset events
usbd_reg_event(&udev, usbd_evt_reset, NULL);
FURI_LOG_I(TAG, "USB Reinit");
susp_evt(&udev, 0, 0);
usbd_connect(&udev, false);
usb.enabled = false;
usbd_enable(&udev, false);
usbd_enable(&udev, true);
furi_delay_ms(USB_RECONNECT_DELAY);
usb_process_mode_start(usb.interface, usb.interface_context);
}
static bool usb_process_set_config(FuriHalUsbInterface* interface, void* context) {
if(usb.mode_lock) {
return false;
} else {
usb_process_mode_change(interface, context);
return true;
}
}
static void usb_process_enable(bool enable) {
if(enable) {
if((!usb.enabled) && (usb.interface != NULL)) {
usbd_connect(&udev, true);
usb.enabled = true;
FURI_LOG_I(TAG, "USB Enable");
}
} else {
if(usb.enabled) {
susp_evt(&udev, 0, 0);
usbd_connect(&udev, false);
usb.enabled = false;
usb.request_pending = false;
FURI_LOG_I(TAG, "USB Disable");
}
}
}
static void usb_process_message(UsbApiEventMessage* message) {
switch(message->type) {
case UsbApiEventTypeSetConfig:
message->return_data->bool_value = usb_process_set_config(
message->data.interface.interface, message->data.interface.context);
break;
case UsbApiEventTypeGetConfig:
message->return_data->void_value = usb.interface;
break;
case UsbApiEventTypeLock:
FURI_LOG_I(TAG, "Mode lock");
usb.mode_lock = true;
break;
case UsbApiEventTypeUnlock:
FURI_LOG_I(TAG, "Mode unlock");
usb.mode_lock = false;
break;
case UsbApiEventTypeIsLocked:
message->return_data->bool_value = usb.mode_lock;
break;
case UsbApiEventTypeDisable:
usb_process_enable(false);
break;
case UsbApiEventTypeEnable:
usb_process_enable(true);
break;
case UsbApiEventTypeReinit:
usb_process_mode_reinit();
break;
case UsbApiEventTypeSetStateCallback:
usb.callback = message->data.state_callback.callback;
usb.callback_context = message->data.state_callback.context;
break;
}
api_lock_unlock(message->lock);
}
static int32_t furi_hal_usb_thread(void* context) {
UNUSED(context);
uint8_t usb_wait_time = 0;
if(furi_message_queue_get_count(usb.queue) > 0) {
furi_thread_flags_set(furi_thread_get_id(usb.thread), UsbEventMessage);
}
while(true) {
uint32_t flags = furi_thread_flags_wait(USB_SRV_ALL_EVENTS, FuriFlagWaitAny, 500);
{
UsbApiEventMessage message;
if(furi_message_queue_get(usb.queue, &message, 0) == FuriStatusOk) {
usb_process_message(&message);
}
}
if((flags & FuriFlagError) == 0) {
if(flags & UsbEventReset) {
if(usb.enabled) {
usb.request_pending = true;
usb_wait_time = 0;
}
}
if(flags & UsbEventRequest) {
usb.request_pending = false;
}
} else if(usb.request_pending) {
usb_wait_time++;
if(usb_wait_time > 4) {
usb_process_mode_reinit();
usb.request_pending = false;
}
}
}
return 0;
}