mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
7bdfe85929
enable DTS support for keymile mpc83xx based boards.
get rid of compile warning:
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
Therefore done:
- add DTS for all mpc83xx based boards from keymile
mainly they are not mainlined to linux.
- add u-boot specific dtsi
- add stdout-path
- add missing ucc4 par_io definitions, which were
in board code, but not in linux DTS
- remove not used ethernet nodes
Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>
Series-to: u-boot
Series-version: 3
Series-changes: 3
- rebase patchset to current mainline commit
c0192950df
- update defconfig files
Series-changes: 2
- add patch which fixes Codingstyle errors in drivers/qe
- add patch which converts the mpc83xx based boards from
keymile to DM_ETH
Cover-letter:
powerpc, mpc83xx: add DM_ETH support
This patch series adds DM ethernet support for mpc83xx based
keymile boards.
Travis build:
END
392 lines
8 KiB
Text
392 lines
8 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* ABB PGGA TEGR1 Device Tree Source
|
|
*
|
|
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "KMTEGR1";
|
|
compatible = "ABB,kmpbec8309";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet_zynq;
|
|
ethernet1 = &enet_piggy2;
|
|
serial0 = &serial0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8309@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>; // 32 bytes
|
|
i-cache-line-size = <32>; // 32 bytes
|
|
d-cache-size = <16384>; // L1, 16K
|
|
i-cache-size = <16384>; // L1, 16K
|
|
timebase-frequency = <66000000>;
|
|
bus-frequency = <264000000>;
|
|
clock-frequency = <264000000>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>;
|
|
};
|
|
|
|
soc: soc8309@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "simple-bus";
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <264000000>;
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl,mpc8313-i2c","fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
clock-frequency = <400000>;
|
|
|
|
mux@70 {
|
|
compatible = "nxp,pca9547";
|
|
reg = <0x70>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Inventory EEPROM of the
|
|
* unit itself
|
|
*/
|
|
ivm@50 {
|
|
label = "MAIN_CTRL";
|
|
compatible = "dummy";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
i2c@2 {
|
|
reg = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Temperature sensors */
|
|
temp@48 {
|
|
label = "front";
|
|
compatible = "national,lm75";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
temp@49 {
|
|
label = "board";
|
|
compatible = "national,lm75";
|
|
reg = <0x49>;
|
|
};
|
|
|
|
temp@4a {
|
|
label = "power";
|
|
compatible = "national,lm75";
|
|
reg = <0x4a>;
|
|
};
|
|
|
|
temp@4b {
|
|
label = "bottom";
|
|
compatible = "national,lm75";
|
|
reg = <0x4b>;
|
|
};
|
|
};
|
|
|
|
i2c@6 {
|
|
reg = <6>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
};
|
|
|
|
i2c@5 {
|
|
reg = <5>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
};
|
|
|
|
i2c@7 {
|
|
reg = <7>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
};
|
|
|
|
i2c@3 {
|
|
reg = <3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
};
|
|
};
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <264000000>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
dma@82a8 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8309-dma", "fsl,elo-dma";
|
|
reg = <0x82a8 4>;
|
|
ranges = <0 0x8100 0x1a8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8309-dma-channel",
|
|
"fsl,elo-dma-channel";
|
|
reg = <0 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8309-dma-channel",
|
|
"fsl,elo-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8309-dma-channel",
|
|
"fsl,elo-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8309-dma-channel",
|
|
"fsl,elo-dma-channel";
|
|
reg = <0x180 0x28>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
};
|
|
|
|
ipic: pic@700 {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "fsl,pq2pro-pic", "fsl,ipic";
|
|
interrupt-controller;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
|
|
gpio1: gpio-controller@c00 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8309-gpio", "fsl,mpc8349-gpio";
|
|
reg = <0xc00 0x100>;
|
|
interrupts = <75 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio-controller@d00 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8309-gpio", "fsl,mpc8349-gpio";
|
|
reg = <0xd00 0x100>;
|
|
interrupts = <75 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
spi@7000 {
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <16 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
mode = "cpu";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* GPIO_15 chipselect for ZYNQ flash */
|
|
gpios = <&gpio1 15 0>;
|
|
|
|
zynq_flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spansion,m25p80";
|
|
reg = <0>;
|
|
spi-max-frequency = <4000000>;
|
|
m25p,fast-read;
|
|
partition@0 {
|
|
label = "bootloader";
|
|
reg = <0x0 0x01000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
qe: qe@e0100000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "qe";
|
|
compatible = "fsl,qe";
|
|
ranges = <0x0 0xe0100000 0x00100000>;
|
|
reg = <0xe0100000 0x480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <396000000>;
|
|
fsl,qe-num-snums = <32>;
|
|
|
|
muram@10000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
ranges = <0x0 0x00010000 0x00004000>;
|
|
|
|
data-only@0 {
|
|
compatible = "fsl,qe-muram-data",
|
|
"fsl,cpm-muram-data";
|
|
reg = <0x0 0x4000>;
|
|
};
|
|
};
|
|
|
|
/* ZYNQ (UCC1, MDIO 0x10, MII) */
|
|
enet_zynq: ethernet@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <1>;
|
|
reg = <0x2000 0x200>;
|
|
interrupts = <32>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
/*id=0, full-dup, 100M, no-pause, no-asym_p*/
|
|
fixed-link = <0 1 100 0 0>;
|
|
rx-clock-name = "clk9";
|
|
tx-clock-name = "clk10";
|
|
phy-connection-type = "mii";
|
|
};
|
|
|
|
/* Piggy2 (UCC3, MDIO 0x00, RMII) */
|
|
enet_piggy2: ucc@2200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <3>;
|
|
reg = <0x2200 0x200>;
|
|
interrupts = <34>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk12";
|
|
phy-handle = <&phy_piggy2>;
|
|
phy-connection-type = "rmii";
|
|
};
|
|
|
|
mdio@2320 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2320 0x38>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
/* Piggy2 (UCC3, MDIO 0x00, RMII) */
|
|
phy_piggy2: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
|
|
/* Explicitly set the tbi-phy to a non-zero address
|
|
* so that it does not conflict with phy_piggy2 that
|
|
* is unfortunately at address 0
|
|
*/
|
|
tbi1: tbi-phy@1 {
|
|
reg = <0x1>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
qeic: interrupt-controller@80 {
|
|
interrupt-controller;
|
|
compatible = "fsl,qe-ic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x80 0x80>;
|
|
big-endian;
|
|
interrupts = <32 8 33 8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
bootcount@0x13ff8 {
|
|
device_type = "bootcount";
|
|
compatible = "u-boot,bootcount";
|
|
reg = <0x13ff8 0x08>;
|
|
};
|
|
|
|
};
|
|
localbus@e0005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8309-localbus", "fsl,pq2pro-localbus",
|
|
"simple-bus";
|
|
reg = <0xe0005000 0xd8>;
|
|
ranges = <0 0 0xf0000000 0x04000000
|
|
1 0 0xe8000000 0x01000000
|
|
2 0 0xe0000000 0x10000000
|
|
3 0 0xb0000000 0x10000000>;
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0x00000000 0x04000000>;
|
|
bank-width = <2>;
|
|
nornand = "nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
use-advanced-sector-protection;
|
|
partition@0 { /* 768KB */
|
|
label = "u-boot";
|
|
reg = <0 0xc0000>;
|
|
};
|
|
partition@c0000 { /* 256KB */
|
|
label = "qe-fw";
|
|
reg = <0xc0000 0x40000>;
|
|
};
|
|
partition@100000 { /* 128KB */
|
|
label = "env";
|
|
reg = <0x100000 0x20000>;
|
|
};
|
|
partition@120000 { /* 128KB */
|
|
label = "envred";
|
|
reg = <0x120000 0x20000>;
|
|
};
|
|
partition@140000 { /* 64256KB */
|
|
label = "ubi0";
|
|
reg = <0x140000 0x3EC0000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "km8309-uboot.dtsi"
|