u-boot/board/gdsys/mpc8308
Dirk Eibach d494cdb97e mpc83xx: Add gazerbeam board
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.

On board peripherals include:
- 2x 10/100 Mbit/s Ethernet (optional)

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 08:03:38 +02:00
..
gazerbeam.c mpc83xx: Add gazerbeam board 2019-05-21 08:03:38 +02:00
hrcon.c gdsys: mpc8308: Use shadow register for output GPIO values 2019-05-21 08:03:38 +02:00
Kconfig mpc83xx: Add gazerbeam board 2019-05-21 08:03:38 +02:00
MAINTAINERS mpc83xx: Add gazerbeam board 2019-05-21 08:03:38 +02:00
Makefile mpc83xx: Add gazerbeam board 2019-05-21 08:03:38 +02:00
mpc8308.c gdsys: Introduce GDSYS_LEGACY_DRIVERS 2019-05-21 08:03:38 +02:00
mpc8308.h gdsys: mpc8308: Use shadow register for output GPIO values 2019-05-21 08:03:38 +02:00
sdram.c gdsys: mpc8308: Don't use manual RAM config if RAM driver is active 2019-05-21 08:03:38 +02:00
strider.c gdsys: mpc8308: Use shadow register for output GPIO values 2019-05-21 08:03:38 +02:00