mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
85d993cef9
Clean up mx25 lowlevel_init: - Add comments. - Do not use write32 repeatedly with the same value in order not to increase code size. - Make register values configurable. - Use macro parameters with default values instead of literal constants. - Use defined macros instead of duplicating code. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: John Rigby <jcrigby@gmail.com> Cc: Matthias Weisser <weisserm@arcor.de>
111 lines
2.8 KiB
ArmAsm
111 lines
2.8 KiB
ArmAsm
/*
|
|
* (C) Copyright 2009 DENX Software Engineering
|
|
* Author: John Rigby <jrigby@gmail.com>
|
|
*
|
|
* Based on U-Boot and RedBoot sources for several different i.mx
|
|
* platforms.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <asm/macro.h>
|
|
#include <asm/arch/macro.h>
|
|
|
|
.macro init_clocks
|
|
/*
|
|
* clocks
|
|
*
|
|
* first enable CLKO debug output
|
|
* 0x40000000 enables the debug CLKO signal
|
|
* 0x05000000 sets CLKO divider to 6
|
|
* 0x00600000 makes CLKO parent clk the USB clk
|
|
*/
|
|
write32 0x53f80064, 0x45600000
|
|
|
|
/* CCTL: ARM = 399 MHz, AHB = 133 MHz */
|
|
write32 0x53f80008, 0x20034000
|
|
|
|
/*
|
|
* PCDR2: NFC = 33.25 MHz
|
|
* This is required for the NAND Flash of this board, which is a Samsung
|
|
* K9F1G08U0B with 25-ns R/W cycle times, in order to make it work with
|
|
* the NFC driver in symmetric (i.e. one-cycle) mode.
|
|
*/
|
|
write32 0x53f80020, 0x01010103
|
|
|
|
/*
|
|
* enable all implemented clocks in all three
|
|
* clock control registers
|
|
*/
|
|
write32 0x53f8000c, 0x1fffffff
|
|
write32 0x53f80010, 0xffffffff
|
|
write32 0x53f80014, 0xfdfff
|
|
.endm
|
|
|
|
.macro init_ddrtype
|
|
/*
|
|
* ddr_type is 3.3v SDRAM
|
|
*/
|
|
write32 0x43fac454, 0x800
|
|
.endm
|
|
|
|
/*
|
|
* sdram controller init
|
|
*/
|
|
.macro init_sdram_bank bankaddr, ctl, cfg
|
|
ldr r0, =0xb8001000
|
|
ldr r2, =\bankaddr
|
|
/*
|
|
* reset SDRAM controller
|
|
* then wait for initialization to complete
|
|
*/
|
|
ldr r1, =(1 << 1)
|
|
str r1, [r0, #0x10]
|
|
1: ldr r3, [r0, #0x10]
|
|
tst r3, #(1 << 31)
|
|
beq 1b
|
|
|
|
ldr r1, =0x95728
|
|
str r1, [r0, #\cfg] /* config */
|
|
|
|
ldr r1, =0x92116480 /* control | precharge */
|
|
str r1, [r0, #\ctl] /* write command to controller */
|
|
str r1, [r2, #0x400] /* command encoded in address */
|
|
|
|
ldr r1, =0xa2116480 /* auto refresh */
|
|
str r1, [r0, #\ctl]
|
|
ldrb r3, [r2] /* read dram twice to auto refresh */
|
|
ldrb r3, [r2]
|
|
|
|
ldr r1, =0xb2116480 /* control | load mode */
|
|
str r1, [r0, #\ctl] /* write command to controller */
|
|
strb r1, [r2, #0x33] /* command encoded in address */
|
|
|
|
ldr r1, =0x82116480 /* control | normal (0)*/
|
|
str r1, [r0, #\ctl] /* write command to controller */
|
|
.endm
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
init_aips
|
|
init_max
|
|
init_m3if
|
|
init_clocks
|
|
|
|
init_sdram_bank 0x80000000, 0x0, 0x4
|
|
|
|
init_sdram_bank 0x90000000, 0x8, 0xc
|
|
mov pc, lr
|