u-boot/arch/arm/include/asm/arch-omap3
Tom Rini c3d2c24f6c OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
In the case of booting from certain peripherals, such as UART, we must
not see what the device descriptor says for RAW or FAT mode because in
addition to being nonsensical, it leads to a hang.  This is why we have
a test currently for the boot mode being within range.  The problem
however is that on some platforms we get MMC2_2 as the boot mode and not
the defined value for MMC2, and in others we get the value for MMC2_2.
This is required to fix eMMC booting on omap5_uevm.

Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on
classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC).

Signed-off-by: Tom Rini <trini@ti.com>
2013-04-08 11:29:34 -04:00
..
am35x_def.h OMAP3: am35x_def.h: add USB defines 2012-11-20 00:16:07 +01:00
clocks.h OMAP3: Add support for DPLL5 (usbhost) 2011-04-27 19:38:09 +02:00
clocks_omap3.h AM3517: Changed default clock rate for AM3517 2012-02-12 10:11:31 +01:00
cpu.h omap3/cpu.h: add BCH support 2013-04-08 11:29:05 -04:00
dma.h omap3: Add interface for omap3 DMA 2011-10-27 21:56:34 +02:00
dss.h omap3: allow dynamic selection of gfx_format 2013-03-08 16:41:13 -05:00
ehci.h ehci-omap: Clean up added ehci-omap.c 2012-02-12 10:11:31 +01:00
emac_defs.h AM35xx: add EMAC support 2011-12-06 23:59:36 +01:00
emif4.h AM35x: Add support for EMIF4 2010-06-08 10:07:19 -05:00
gpio.h omap: fix gpio related build breaks 2011-09-04 11:33:36 +02:00
i2c.h ARMV7: Modify i2c driver for more reliable operation on OMAP4 2010-08-05 10:11:24 -04:00
mem.h OMAP3: mem: Add Numonyx OneNAND 200MHz timing information 2012-09-01 14:58:11 +02:00
mmc_host_def.h omap: consolidate common mmc definitions 2013-03-08 16:41:12 -05:00
musb.h OMAP3: am35x: add musb functions 2012-11-20 00:16:07 +01:00
mux.h OMAP3: add definition of CTRL_WKUP_CTRL register 2012-09-04 17:05:38 -07:00
omap3-regs.h ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions 2011-04-27 19:38:09 +02:00
omap3.h start.S: remove omap3 specific code from start.S 2011-12-06 23:59:34 +01:00
omap_gpmc.h omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel 2013-04-08 11:29:05 -04:00
spl.h OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC 2013-04-08 11:29:34 -04:00
sys_proto.h omap_gpmc: change nandecc command 2013-04-08 11:29:05 -04:00