mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 14:14:32 +00:00
3f2b4d7220
Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
67 lines
1.3 KiB
C
67 lines
1.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2020 NXP
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/imx8ulp-pins.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/pcc.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if IS_ENABLED(CONFIG_FEC_MXC)
|
|
#define ENET_CLK_PAD_CTRL (PAD_CTL_PUS_UP | PAD_CTL_DSE | PAD_CTL_IBE_ENABLE)
|
|
static iomux_cfg_t const enet_clk_pads[] = {
|
|
IMX8ULP_PAD_PTE19__ENET0_REFCLK | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
|
|
IMX8ULP_PAD_PTF10__ENET0_1588_CLKIN | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
|
|
};
|
|
|
|
static int setup_fec(void)
|
|
{
|
|
/*
|
|
* Since ref clock and timestamp clock are from external,
|
|
* set the iomux prior the clock enablement
|
|
*/
|
|
imx8ulp_iomux_setup_multiple_pads(enet_clk_pads, ARRAY_SIZE(enet_clk_pads));
|
|
|
|
/* Select enet time stamp clock: 001 - External Timestamp Clock */
|
|
cgc1_enet_stamp_sel(1);
|
|
|
|
/* enable FEC PCC */
|
|
pcc_clock_enable(4, ENET_PCC4_SLOT, true);
|
|
pcc_reset_peripheral(4, ENET_PCC4_SLOT, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_FEC_MXC))
|
|
setup_fec();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
return 0;
|
|
}
|