u-boot/include/configs/stm32f429-discovery.h
kunhuahuang 60570df19c stm32f4: add serial print port
Add the stm32F4 board's serial ports support.
User can use it easily.
The user only need to edit the number of the usart.
The patch also fix the serial print out.

Last, this version of patch fix the first patch checkpatch.pl error.
Thanks to Kamil Lulko.

Signed-off-by: kunhuahuang <huangkunhua@gmail.com>
2015-05-10 07:29:38 -04:00

112 lines
2.6 KiB
C

/*
* (C) Copyright 2015
* Kamil Lulko, <rev13@wp.pl>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_STM32F4
#define CONFIG_STM32F4DISCOVERY
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_OF_LIBFDT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SYS_FLASH_BASE 0x08000000
#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
#define CONFIG_SYS_TEXT_BASE 0x08000000
#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF
/*
* Configuration of the external SDRAM memory
*/
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_RAM_SIZE (8 << 20)
#define CONFIG_SYS_RAM_CS 1
#define CONFIG_SYS_RAM_FREQ_DIV 2
#define CONFIG_SYS_RAM_BASE 0xD0000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
#define CONFIG_SYS_LOAD_ADDR 0xD0400000
#define CONFIG_LOADADDR 0xD0400000
#define CONFIG_SYS_MAX_FLASH_SECT 12
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OFFSET (256 << 10)
#define CONFIG_ENV_SECT_SIZE (128 << 10)
#define CONFIG_ENV_SIZE (8 << 10)
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_RED_LED 110
#define CONFIG_GREEN_LED 109
#define CONFIG_STM32_GPIO
#define CONFIG_STM32_SERIAL
/*
* Configuration of the USART
* 1: TX:PA9 PX:PA10
* 2: TX:PD5 RX:PD6
* 3: TX:PC10 RX:PC11
* 6: TX:PC6 RX:PC7
*/
#define CONFIG_STM32_USART 1
#define CONFIG_STM32_HSE_HZ 8000000
#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (2 << 20)
#define CONFIG_STACKSIZE (64 << 10)
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"console=ttystm0,115200 earlyprintk consoleblank=0 ignore_loglevel"
#define CONFIG_BOOTCOMMAND \
"run bootcmd_romfs"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
"bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
"bootm 0x08044000 - 0x08042000\0"
#define CONFIG_BOOTDELAY 3
#define CONFIG_AUTOBOOT
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_MEM
#define CONFIG_CMD_MISC
#define CONFIG_CMD_TIMER
#endif /* __CONFIG_H */