u-boot/arch/arm/mach-sunxi
Tom Rini 6f6b7cfa89 Convert all of CONFIG_CONS_INDEX to Kconfig
This converts the following to Kconfig:
   CONFIG_CONS_INDEX

We have existing entries for this option in a number of places, with
different guards on them.  They're also sometimes used for things not
directly inside of the serial driver.  First, introduce a new symbol to
guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
need this for the serial driver, but for some other use, we can still do
it.  Next, consolidate all of these into the single entry in
drivers/serial/Kconfig.  Finally, introduce CONS_INDEX_[023456] so that
we can imply a correct value here to make the defconfig side of this
smaller.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rework a lot of the logic here, such that I took authorship from
Adam, but kept his S-o-B line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-16 10:28:52 -04:00
..
dram_timings sunxi: add LPDDR3 timing from stock boot0 2017-06-08 22:37:55 +05:30
board.c spl: eMMC/SD: Provide one __weak spl_boot_mode() function 2018-02-07 22:06:18 -05:00
clock.c sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
clock_sun4i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
clock_sun6i.c sunxi: switch PRCM to non-secure on H3/H5 SoCs 2017-08-11 15:49:39 +05:30
clock_sun8i_a83t.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
clock_sun9i.c sunxi: add initial clock setup for sun9i for SPL 2016-10-30 11:38:04 +01:00
cpu_info.c sunxi: add basic V3s support 2017-04-21 09:23:17 +02:00
dram_helpers.c ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
dram_sun4i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun6i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a23.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a33.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a83t.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun9i.c sunxi: DRAM initialisation for sun9i 2016-10-30 11:38:04 +01:00
dram_sunxi_dw.c sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller 2017-06-08 22:37:55 +05:30
gtbus_sun9i.c sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
Kconfig Convert all of CONFIG_CONS_INDEX to Kconfig 2018-03-16 10:28:52 -04:00
Makefile arm: sunxi: Move spl spi sunxi code to mach-sunxi 2018-03-13 19:50:10 +05:30
p2wi.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
pinmux.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
pmic_bus.c sunxi: Enable AXP221s in I2C mode with the R40 SoC 2017-04-20 13:30:00 +02:00
prcm.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
rmr_switch.S sunxi: A64: do an RMR switch if started in AArch32 mode 2017-01-04 16:37:42 +01:00
rsb.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
spl_spi_sunxi.c arm: sunxi: Move spl spi sunxi code to mach-sunxi 2018-03-13 19:50:10 +05:30
usb_phy.c sunxi: usb_phy: invert the USB phy_ctl condition 2017-10-03 19:12:06 +02:00