mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
702e6014f1
Also drop a few files referring to no longer / not yet supported boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
67 lines
2.1 KiB
Text
67 lines
2.1 KiB
Text
This document describes the board support for
|
|
Dil/NetPC DNP/5370 (http://www.dilnetpc.com/dnp0086.htm) module.
|
|
The distributor is SSV (http://www.ssv-embedded.de),
|
|
|
|
The module used to develop the support files contains:
|
|
|
|
* Processor: Blackfin BF537 Rev 0.3 (600 MHz core / 120MHz RAM)
|
|
|
|
* RAM: 32 MB SDRAM
|
|
Hynix HY57V561620FTP-H 810EA
|
|
Connected to Blackfin via "Expansion Bus"
|
|
Address range 0x0000.0000 - 0x1fff.ffff
|
|
|
|
* NOR flash: 32 MBit (4 MByte)
|
|
Exel Semiconductor ES29LVS320EB
|
|
Connected to Blackfin via "Expansion Bus",
|
|
Chip Selects 0, 1 and 2, each is connected
|
|
to a 1 MB memory bank at Blackfin, therefore
|
|
only 3 MB accessible.
|
|
Address range 0x2000.0000 - 0x202f.ffff
|
|
CFI compatible
|
|
|
|
Exel Semiconductor was bought by Rohm Semiconductor (www.rohm.com).
|
|
|
|
* NAND flash: 64 MBit (8 MByte)
|
|
Atmel 45DB642D-CNU
|
|
Connected to Blackfin via SPI
|
|
CFI compatible
|
|
|
|
* Davicom DM9161EP Ethernet PHY
|
|
|
|
* A SD card reader, connected via SPI
|
|
|
|
* Hardware watchdog MAX823 or TPS3823
|
|
|
|
(other devices not listed here)
|
|
|
|
To run it, the module must be inserted in a 64 pin DIL socket
|
|
on another board, e.g. DNP/EVA13 (together: SSV SK28).
|
|
|
|
The Blackfin is booted from NOR flash. The NOR flash data begins
|
|
with the U-Boot code and is then followed by the Linux code.
|
|
Finally, the MAC is stored in the last sector.
|
|
You may need to adjust these settings to your needs.
|
|
The memory map used to develop the board support is:
|
|
|
|
Memory map:
|
|
0x00000000 .. 0x01ffffff SDRAM
|
|
0x20000000 .. 0x202fffff NOR flash
|
|
|
|
RAM use:
|
|
0x01f9bffc .. 0x01fbbffb U-Boot stack
|
|
0x01f9c000 .. 0x01f9ffff U-Boot global data
|
|
0x01fa0000 .. 0x01fbffff U-Boot malloc() RAM
|
|
0x01fc0000 .. 0x01ffffff U-Boot execution RAM
|
|
|
|
NOR flash use:
|
|
0x20000000 .. 0x0002ffff U-Boot
|
|
0x20004000 .. 0x20005fff U-Boot environment
|
|
0x20030000 .. 0x202effff Linux kernel image
|
|
0x202f0000 .. 0x202fffff MAC address sector
|
|
|
|
NOR flash is 0x00300000 (3145728) bytes large (3 MB).
|
|
Max space for compressed kernel in flash is 0x002c0000 (2883584) bytes (2.75 MB)
|
|
Max space for u-boot in flash is 0x00030000 (196608) bytes (192 KB)
|
|
|
|
The module is hardwired to BYPASS boot mode.
|