u-boot/include/configs/mxs.h
Tom Rini a918df21f0 Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAX_NAND_DEVICE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:54 -05:00

99 lines
2.7 KiB
C

/*
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIGS_MXS_H__
#define __CONFIGS_MXS_H__
/*
* Includes
*/
#if defined(CONFIG_MX23) && defined(CONFIG_MX28)
#error Select either CONFIG_MX23 or CONFIG_MX28 , never both!
#elif !defined(CONFIG_MX23) && !defined(CONFIG_MX28)
#error Select one of CONFIG_MX23 or CONFIG_MX28 !
#endif
#include <asm/arch/regs-base.h>
#if defined(CONFIG_MX23)
#include <asm/arch/iomux-mx23.h>
#elif defined(CONFIG_MX28)
#include <asm/arch/iomux-mx28.h>
#endif
/*
* CPU specifics
*/
/* Startup hooks */
/* Memory sizes */
/* OCRAM at 0x0 ; 32kB on MX23 ; 128kB on MX28 */
#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
#if defined(CONFIG_MX23)
#define CONFIG_SYS_INIT_RAM_SIZE (32 * 1024)
#elif defined(CONFIG_MX28)
#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024)
#endif
/* Point initial SP in SRAM so SPL can use it too. */
/*
* We need to sacrifice first 4 bytes of RAM here to avoid triggering some
* strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
* binary. In case there was more of this mess, 0x100 bytes are skipped.
*
* In case of a HAB boot, we cannot for some weird reason use the first 4KiB
* of DRAM when loading. Moreover, we use the first 4 KiB for IVT and CST
* blocks, thus U-Boot starts at offset +8 KiB of DRAM start.
*
* As for the SPL, we must avoid the first 4 KiB as well, but we load the
* IVT and CST to 0x8000, so we don't need to waste the subsequent 4 KiB.
*/
/* U-Boot general configuration */
/*
* Drivers
*/
/*
* DUART Serial Driver.
* Conflicts with AUART driver which can be set by board.
*/
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
/* Default baudrate can be overridden by board! */
/* NAND */
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BASE 0x60000000
#endif
/* OCOTP */
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXS_OCOTP
#endif
/* SPI */
#ifdef CONFIG_CMD_SPI
#define CONFIG_SPI_HALF_DUPLEX
#endif
#endif /* __CONFIGS_MXS_H__ */