Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-18 17:23:09 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/bosch/shc
History
Harald Seiler 35b65dd8ef reset: Remove addr parameter from reset_cpu() 
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to.  This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value.  Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.

Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g.  COLD vs WARM resets).  As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).

To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely.  Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.

This transformation was done with the following coccinelle patch:

    @@
    expression argvalue;
    @@
    - reset_cpu(argvalue)
    + reset_cpu()

    @@
    identifier argname;
    type argtype;
    @@
    - reset_cpu(argtype argname)
    + reset_cpu(void)
    { ... }

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-02 14:03:02 -05:00
..
board.c reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
board.h SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
Kconfig am335x, shc: kconfig: Fix misspelled choice default 2018-02-05 20:58:11 -05:00
MAINTAINERS am335x, shc: adapt shc board to DM 2019-02-01 09:09:40 -05:00
Makefile SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
mux.c common: Move hang() to the same header as panic() 2020-01-17 17:53:40 -05:00
README am335x, shc: add support for the am335x based bosch shc board 2016-06-09 13:53:10 -04:00

README 

Summary
=======

This document covers various features of the 'am335x_shc' build.

Hardware
========

AM335X based board:

I2C:   ready
DRAM:  512 MiB
Enabling the D-Cache
MMC:   OMAP SD/MMC: 0 @ 26 MHz, OMAP SD/MMC: 1 @ 26 MHz
Net:   cpsw

Following boot options are possible:

2 Jumpers:

Jumper 1 Jumper 2 Bootmode
off      off    eMMC boot
on       off    SD boot
off      on     Net boot

Compiling
=========

$ make am335x_shc_defconfig
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/kconfig/conf.o
  SHIPPED scripts/kconfig/zconf.tab.c
  SHIPPED scripts/kconfig/zconf.lex.c
  SHIPPED scripts/kconfig/zconf.hash.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
#
# configuration written to .config
#
$ make -s all

-> now you have the MLO and the u-boot.img file, you can put
on your SD card or eMMC.

Configuring
===========

There are a lot of board versions and boot configurations, which
can be selected through "make menuconfig"

ARM architecture  --->
  enable different boot versions for the shc board (enable eMMC)  --->
   (X) enable eMMC
   ( ) enable ICT
   ( ) enable NETBOOT
   ( ) enable SDBOOT

  enable different board versions for the shc board (C3 Sample board version)  --->
   ( ) B Sample board version
   ( ) B2 Sample board version
   ( ) C Sample board version
   ( ) C2 Sample board version
   (X) C3 Sample board version
   ( ) Series board version

Netboot
=======
- see also doc/SPL/README.am335x-network

- set the jumper into netboot mode
- compile the U-boot sources with:
  make am335x_shc_netboot_defconfig
  make all
- copy the images into your tftp boot directory
  cp spl/u-boot-spl.bin /tftpboot/.../u-boot-spl-restore.bin
  cp u-boot.img /tftpboot/.../u-boot-restore.img
- power on the board, and you should get something like this:

U-Boot SPL 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18)
#### NETBOOT ####
SHC
MPU reference clock runs at 6 MHz
Setting MPU clock to 594 MHz
Enabling Spread Spectrum of 18 permille for MPU
Trying to boot from net
Using default environment

<ethaddr> not set. Validating first E-fuse MAC
cpsw
cpsw Waiting for PHY auto negotiation to complete... done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.20.91 (258 ms)
Using cpsw device
TFTP from server 192.168.1.1; our IP address is 192.168.20.91
Filename 'shc/u-boot-restore.img'.
Load address: 0x807fffc0
Loading: ##################
         1.2 MiB/s
done
Bytes transferred = 262480 (40150 hex)


U-Boot 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18 +0200)

       Watchdog enabled
I2C:   ready
DRAM:  512 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - bad CRC, using default environment

Net:   cpsw
switch to partitions #0, OK