mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-20 10:13:09 +00:00
2421497cb7
Two displays supported by the sunxi display driver (each one used by a single board) require initialization over I2C. Both previously used i2c_soft; replace this with the i2c-gpio instance that already exists in those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus). Since the i2c-gpio nodes are not referenced by any other node in the device trees (the device trees have no panel node), the I2C bus is selected by its node name. This panel initialization code was the only i2c_soft user, so the i2c_soft GPIO setup code can be removed now as well. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
135 lines
4.1 KiB
C
135 lines
4.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) 2015 Hans de Goede <hdegoede@redhat.com>
|
|
*/
|
|
|
|
/*
|
|
* Support for the ANX9804 bridge chip, which can take pixel data coming
|
|
* from a parallel LCD interface and translate it on the flight into a DP
|
|
* interface for driving eDP TFT displays.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <linux/delay.h>
|
|
#include "anx98xx-edp.h"
|
|
#include "anx9804.h"
|
|
|
|
/**
|
|
* anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
|
|
*
|
|
* This function will init an anx9804 parallel lcd to dp bridge chip
|
|
* using the passed in parameters.
|
|
*
|
|
* @i2c_bus: Device of the i2c bus to which the anx9804 is connected.
|
|
* @lanes: Number of displayport lanes to use
|
|
* @data_rate: Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G
|
|
* @bpp: Bits per pixel, must be 18 or 24
|
|
*/
|
|
void anx9804_init(struct udevice *i2c_bus, u8 lanes, u8 data_rate, int bpp)
|
|
{
|
|
struct udevice *chip0, *chip1;
|
|
int c, colordepth, i, ret;
|
|
|
|
ret = i2c_get_chip(i2c_bus, 0x38, 1, &chip0);
|
|
if (ret)
|
|
return;
|
|
|
|
ret = i2c_get_chip(i2c_bus, 0x39, 1, &chip1);
|
|
if (ret)
|
|
return;
|
|
|
|
if (bpp == 18)
|
|
colordepth = 0x00; /* 6 bit */
|
|
else
|
|
colordepth = 0x10; /* 8 bit */
|
|
|
|
/* Reset */
|
|
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL_REG, 1);
|
|
mdelay(100);
|
|
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL_REG, 0);
|
|
|
|
/* Write 0 to the powerdown reg (powerup everything) */
|
|
dm_i2c_reg_write(chip1, ANX9804_POWERD_CTRL_REG, 0);
|
|
|
|
c = dm_i2c_reg_read(chip1, ANX9804_DEV_IDH_REG);
|
|
if (c != 0x98) {
|
|
printf("Error anx9804 chipid mismatch\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
c = dm_i2c_reg_read(chip0, ANX9804_SYS_CTRL2_REG);
|
|
dm_i2c_reg_write(chip0, ANX9804_SYS_CTRL2_REG, c);
|
|
c = dm_i2c_reg_read(chip0, ANX9804_SYS_CTRL2_REG);
|
|
if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
|
|
break;
|
|
|
|
mdelay(5);
|
|
}
|
|
if (i == 100)
|
|
printf("Error anx9804 clock is not stable\n");
|
|
|
|
dm_i2c_reg_write(chip1, ANX9804_VID_CTRL2_REG, colordepth);
|
|
|
|
/* Set a bunch of analog related register values */
|
|
dm_i2c_reg_write(chip0, ANX9804_PLL_CTRL_REG, 0x07);
|
|
dm_i2c_reg_write(chip1, ANX9804_PLL_FILTER_CTRL3, 0x19);
|
|
dm_i2c_reg_write(chip1, ANX9804_PLL_CTRL3, 0xd9);
|
|
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
|
|
dm_i2c_reg_write(chip1, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
|
|
dm_i2c_reg_write(chip1, ANX9804_ANALOG_DEBUG_REG3, 0x99);
|
|
dm_i2c_reg_write(chip1, ANX9804_PLL_FILTER_CTRL1, 0x7b);
|
|
dm_i2c_reg_write(chip0, ANX9804_LINK_DEBUG_REG, 0x30);
|
|
dm_i2c_reg_write(chip1, ANX9804_PLL_FILTER_CTRL, 0x06);
|
|
|
|
/* Force HPD */
|
|
dm_i2c_reg_write(chip0, ANX9804_SYS_CTRL3_REG,
|
|
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);
|
|
|
|
/* Power up and configure lanes */
|
|
dm_i2c_reg_write(chip0, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
|
|
dm_i2c_reg_write(chip0, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
|
|
dm_i2c_reg_write(chip0, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
|
|
dm_i2c_reg_write(chip0, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
|
|
dm_i2c_reg_write(chip0, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
|
|
|
|
/* Reset AUX CH */
|
|
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL2_REG,
|
|
ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX);
|
|
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL2_REG,
|
|
ANX9804_RST_CTRL2_AC_MODE);
|
|
|
|
/* Powerdown audio and some other unused bits */
|
|
dm_i2c_reg_write(chip1, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
|
|
dm_i2c_reg_write(chip0, ANX9804_HDCP_CONTROL_0_REG, 0x00);
|
|
dm_i2c_reg_write(chip0, 0xa7, 0x00);
|
|
|
|
/* Set data-rate / lanes */
|
|
dm_i2c_reg_write(chip0, ANX9804_LINK_BW_SET_REG, data_rate);
|
|
dm_i2c_reg_write(chip0, ANX9804_LANE_COUNT_SET_REG, lanes);
|
|
|
|
/* Link training */
|
|
dm_i2c_reg_write(chip0, ANX9804_LINK_TRAINING_CTRL_REG,
|
|
ANX9804_LINK_TRAINING_CTRL_EN);
|
|
mdelay(5);
|
|
for (i = 0; i < 100; i++) {
|
|
c = dm_i2c_reg_read(chip0, ANX9804_LINK_TRAINING_CTRL_REG);
|
|
if ((c & 0x01) == 0)
|
|
break;
|
|
|
|
mdelay(5);
|
|
}
|
|
if(i == 100) {
|
|
printf("Error anx9804 link training timeout\n");
|
|
return;
|
|
}
|
|
|
|
/* Enable */
|
|
dm_i2c_reg_write(chip1, ANX9804_VID_CTRL1_REG,
|
|
ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
|
|
/* Force stream valid */
|
|
dm_i2c_reg_write(chip0, ANX9804_SYS_CTRL3_REG,
|
|
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL |
|
|
ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL);
|
|
}
|