mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
af956271f6
The RGMII ports on LS1043ARDB platforms require both RX and TX internal delays to be enabled. The device tree reports only the TX ID because the RX ID used to be enabled by default. With the addition of RX ID support for the Realtek 8211F PHY driver in commite32e4d0f58("net: phy: realtek: add rx delay support for RTL8211F"), the RX ID is disabled by the driver if not reported explicitly. This causes the RX to no longer work. Change the phy-connection-type for the RGMII ports to "rgmii-id" in order to enable both RX and TX internal delays. Fixes:be1d758969("ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1043ARDB") Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
181 lines
2.9 KiB
Text
181 lines
2.9 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
|
|
*
|
|
* Copyright (C) 2015, Freescale Semiconductor
|
|
* Copyright 2020-2021 NXP
|
|
*
|
|
* Mingkai Hu <Mingkai.hu@freescale.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/include/ "fsl-ls1043a.dtsi"
|
|
|
|
/ {
|
|
model = "LS1043A RDB Board";
|
|
|
|
aliases {
|
|
spi1 = &dspi0;
|
|
};
|
|
|
|
};
|
|
|
|
&dspi0 {
|
|
bus-num = <0>;
|
|
status = "okay";
|
|
|
|
dspiflash: n25q12a {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>; /* input clock */
|
|
};
|
|
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
ina220@40 {
|
|
compatible = "ti,ina220";
|
|
reg = <0x40>;
|
|
shunt-resistor = <1000>;
|
|
};
|
|
adt7461a@4c {
|
|
compatible = "adi,adt7461a";
|
|
reg = <0x4c>;
|
|
};
|
|
eeprom@52 {
|
|
compatible = "at24,24c512";
|
|
reg = <0x52>;
|
|
};
|
|
|
|
eeprom@53 {
|
|
compatible = "at24,24c512";
|
|
reg = <0x53>;
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "pericom,pt7c4338";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&ifc {
|
|
status = "okay";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
/* NOR, NAND Flashes and FPGA on board */
|
|
ranges = <0x0 0x0 0x0 0x60000000 0x08000000
|
|
0x1 0x0 0x0 0x7e800000 0x00010000
|
|
0x2 0x0 0x0 0x7fb00000 0x00000100>;
|
|
|
|
nor@0,0 {
|
|
compatible = "cfi-flash";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x0 0x0 0x8000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
};
|
|
|
|
nand@1,0 {
|
|
compatible = "fsl,ifc-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x1 0x0 0x10000>;
|
|
};
|
|
|
|
cpld: board-control@2,0 {
|
|
compatible = "fsl,ls1043ardb-cpld";
|
|
reg = <0x2 0x0 0x0000100>;
|
|
};
|
|
};
|
|
|
|
&duart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&duart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
#include "fsl-ls1043-post.dtsi"
|
|
|
|
&fman0 {
|
|
ethernet@e0000 {
|
|
phy-handle = <&qsgmii_phy1>;
|
|
phy-connection-type = "qsgmii";
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@e2000 {
|
|
phy-handle = <&qsgmii_phy2>;
|
|
phy-connection-type = "qsgmii";
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@e4000 {
|
|
phy-handle = <&rgmii_phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@e6000 {
|
|
phy-handle = <&rgmii_phy2>;
|
|
phy-connection-type = "rgmii-id";
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@e8000 {
|
|
phy-handle = <&qsgmii_phy3>;
|
|
phy-connection-type = "qsgmii";
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@ea000 {
|
|
phy-handle = <&qsgmii_phy4>;
|
|
phy-connection-type = "qsgmii";
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@f0000 { /* 10GEC1 */
|
|
phy-handle = <&aqr105_phy>;
|
|
phy-connection-type = "xgmii";
|
|
status = "okay";
|
|
};
|
|
|
|
mdio@fc000 {
|
|
rgmii_phy1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
};
|
|
|
|
rgmii_phy2: ethernet-phy@2 {
|
|
reg = <0x2>;
|
|
};
|
|
|
|
qsgmii_phy1: ethernet-phy@4 {
|
|
reg = <0x4>;
|
|
};
|
|
|
|
qsgmii_phy2: ethernet-phy@5 {
|
|
reg = <0x5>;
|
|
};
|
|
|
|
qsgmii_phy3: ethernet-phy@6 {
|
|
reg = <0x6>;
|
|
};
|
|
|
|
qsgmii_phy4: ethernet-phy@7 {
|
|
reg = <0x7>;
|
|
};
|
|
};
|
|
|
|
mdio@fd000 {
|
|
aqr105_phy: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
interrupts = <0 132 4>;
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
};
|