u-boot/arch/arm/include/asm
Stefan Roese e7778ec153 arm: maxbcm: Enable SPL to include DDR training code into U-Boot
This patch adds SPL support to the maxbcm MV78460 based board. Including
the fixed DDR configuratrion needed for the DDR training code. And the
the serdes PHY init code.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-02-06 17:24:43 +01:00
..
arch-a320
arch-am33xx arm: am437x: Enable hardware leveling for EMIF 2015-01-13 11:53:39 -05:00
arch-arm720t
arch-armada-xp arm: maxbcm: Enable SPL to include DDR training code into U-Boot 2015-02-06 17:24:43 +01:00
arch-armada100 ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
arch-armv7
arch-at91 ARM: atmel: sama5d4: add usb platform data 2015-01-19 15:02:43 +01:00
arch-bcm281xx bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
arch-bcm2835 ARM: rpi: support model A+ 2014-12-29 16:31:22 -05:00
arch-bcmcygnus arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
arch-bcmnsp arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
arch-davinci Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' 2014-07-01 15:11:18 +02:00
arch-ep93xx arm: ep9315: Return back Cirrus Logic EDB9315A board support 2014-07-04 23:45:48 +02:00
arch-exynos exynos5: pinmux: check flag for i2c config 2015-01-29 17:10:00 -07:00
arch-fsl-lsch3 armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page 2014-09-25 08:36:19 -07:00
arch-imx imx: consolidate set_chipselect_size function 2014-11-20 10:30:19 +01:00
arch-keystone keystone: set default pci mode to root complex 2015-01-05 15:13:47 -05:00
arch-kirkwood ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
arch-ks8695
arch-lpc32xx ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
arch-ls102xa ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot 2015-01-23 22:29:14 -06:00
arch-mb86r0x sizes.h - consolidate for all architectures 2014-03-04 12:15:01 -05:00
arch-mvebu arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h 2014-10-23 09:59:20 -04:00
arch-mx5 imx: consolidate set_chipselect_size function 2014-11-20 10:30:19 +01:00
arch-mx6 arm:mx6sx add QSPI support 2014-12-31 14:52:32 +05:30
arch-mx25 imx25: Add new hardware registers 2014-05-09 15:10:53 +02:00
arch-mx27
arch-mx31 arm: mx31: use common timer functions 2014-09-16 12:51:46 +02:00
arch-mx35 arm: mx35: use common timer functions 2014-09-16 12:53:09 +02:00
arch-mxs arch-mx: add missing include 2014-10-25 07:27:37 -04:00
arch-nomadik
arch-omap3 omap3: add some MUX definitions for upcoming cairo 2015-01-29 12:00:50 -05:00
arch-omap4 ARM: OMAP4: Panda: rework DMM logic 2015-01-05 15:13:45 -05:00
arch-omap5 ARM: OMAP5: DRA7xx: Add support for power rail grouping 2015-01-29 12:00:49 -05:00
arch-orion5x
arch-pantheon dm: mmc: Remove use of fdtdec GPIO support 2015-01-29 17:09:52 -07:00
arch-pxa include: delete include/linux/config.h 2013-11-08 15:25:13 -05:00
arch-rmobile mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC 2015-01-19 16:24:25 +02:00
arch-s3c24x0 mtd: nand: s3c: Unify the register definition and naming 2014-11-26 23:21:43 -06:00
arch-s5pc1xx dm: exynos: gpio: Convert to driver model 2014-10-22 10:36:36 -06:00
arch-sa1100
arch-socfpga socfpga: correctly increment freeze_controller_base address 2014-12-06 13:53:57 +01:00
arch-spear spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs 2014-02-20 06:49:02 +01:00
arch-stv0991 stv0991: enable ethernet support 2014-12-09 15:16:19 -05:00
arch-sunxi sunxi: rsb: Move rsb_set_device_mode() call to rsb_init() 2015-02-02 13:55:14 +01:00
arch-tegra dm: mmc: Remove use of fdtdec GPIO support 2015-01-29 17:09:52 -07:00
arch-tegra20 dm: tegra: video: Remove use of fdtdec GPIO support 2015-01-29 17:09:51 -07:00
arch-tegra30 ARM: tegra: Implement powergate support 2014-12-18 13:19:20 -07:00
arch-tegra114 ARM: tegra: Implement powergate support 2014-12-18 13:19:20 -07:00
arch-tegra124 ARM: tegra: Implement powergate support 2014-12-18 13:19:20 -07:00
arch-tnetv107x mtd: nand: davinci: add header file for driver definitions 2014-06-19 17:53:58 -04:00
arch-u8500
arch-uniphier ARM: UniPhier: add SG_MEMCONF macros for DDR channel 2 2015-01-23 00:52:16 +09:00
arch-vf610 arm: vf610: improve evaluation of reset source 2014-12-01 10:20:22 +01:00
arch-zynq dm: zynq: Remove inline gpio functions 2015-01-29 17:09:52 -07:00
armv8 ARMv8: Adjust MMU setup 2014-07-03 08:40:48 +02:00
imx-common Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-11-05 12:48:09 -05:00
iproc-common arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
kona-common bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
proc-armv ARM: add missing HYP mode constant 2014-07-28 17:06:35 +02:00
ti-common dma: ti-edma3: introduce edma3 driver 2014-10-23 11:27:29 -04:00
armv7.h ARM: bootm: do not add PSCI to fdt when booting in secure mode. 2015-01-05 15:02:03 -05:00
assembler.h arm: build arch memset/memcpy in Thumb2 mode 2015-01-09 10:20:22 -05:00
atomic.h Remove ${objtree}/include/asm/proc/ link 2014-06-11 16:27:05 -04:00
bitops.h Remove ${objtree}/include/asm/proc/ link 2014-06-11 16:27:05 -04:00
bootm.h
byteorder.h armv8: Use __aarch64__ rather than CONFIG_ARM64 in some cases 2014-01-10 10:10:23 +01:00
cache.h ARM: cache_v7: use __weak 2014-07-04 19:57:22 +02:00
config.h arm: ls102xa: Add Freescale LS102xA SoC support 2014-09-08 10:30:32 -07:00
davinci_rtc.h am33xx, davinci: Create and use <asm/davinci_rtc.h> 2013-11-01 15:30:22 -04:00
dma-mapping.h
ehci-omap.h usb: new board-specific USB init interface 2013-10-20 23:42:40 +02:00
emif.h arm: am437x: Enable hardware leveling for EMIF 2015-01-13 11:53:39 -05:00
errno.h
gic.h arm64 patch: gicv3 support 2014-04-08 00:15:12 +02:00
global_data.h qe: add u-qe support to arm board 2014-11-19 12:55:45 -08:00
gpio.h
hardware.h
io.h arm: ls102xa: Add Freescale LS102xA SoC support 2014-09-08 10:30:32 -07:00
linkage.h
mach-types.h arm: tegra: initial support for apalis t30 2014-10-22 09:30:54 -07:00
macro.h gic: fixed compilation error in GICv2 wait for interrupt macro 2014-10-28 07:57:31 +01:00
memory.h include: delete include/linux/config.h 2013-11-08 15:25:13 -05:00
omap_boot.h
omap_common.h arm: omap_common: expose tps659038 and dra7xx_dplls 2014-12-04 11:04:14 -05:00
omap_gpio.h dm: omap: gpio: Support driver model 2014-10-23 19:29:07 -06:00
omap_mmc.h
omap_musb.h
pcie_layerscape.h arm: ls102xa: Update PCIe dts node status 2014-12-11 09:35:56 -08:00
pl310.h mx6: Enable L2 cache support 2014-02-11 11:24:12 +01:00
posix_types.h armv8: Use __aarch64__ rather than CONFIG_ARM64 in some cases 2014-01-10 10:10:23 +01:00
processor.h Remove ${objtree}/include/asm/proc/ link 2014-06-11 16:27:05 -04:00
psci.h ARM: HYP/non-sec: add generic ARMv7 PSCI code 2014-07-28 17:19:18 +02:00
ptrace.h Remove ${objtree}/include/asm/proc/ link 2014-06-11 16:27:05 -04:00
sections.h
secure.h ARM: HYP/non-sec: allow relocation to secure RAM 2014-07-28 17:19:09 +02:00
semihosting.h arm: semihosting: fix up compile bugs 2014-12-29 07:44:06 -05:00
setup.h
spl.h arm: socfpga: Zap spl.h and ad-hoc related syms 2014-10-27 02:26:24 +01:00
string.h
system.h ARM: Implement non-cached memory support 2014-12-18 13:19:21 -07:00
types.h arm64: core support 2014-01-09 16:08:44 +01:00
u-boot-arm.h arm: vectors: provide protypes from vectors.S 2014-10-25 15:27:36 -04:00
u-boot.h bd_info: remove bi_barudrate member from struct bd_info 2014-05-12 15:19:45 -04:00
unaligned.h arm64: core support 2014-01-09 16:08:44 +01:00
utils.h