Nishanth Menon e52e334e5c ARM: DRA7: Add ABB setup for all domains ... ABB should be initialized for all required domains voltage domain for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units and has been hard to debug. This specifically is a concern with DRA7 generation of SoCs since other than VDD_MPU, all other domains are only permitted to setup the voltages to required OPP only at boot. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>		2016-04-25 15:10:41 -04:00
..
abb.c	DRA7: add ABB setup for MPU voltage domain	2014-01-24 11:41:17 -05:00
boot.c	omap5: Definitions for SYS_BOOT-based fallback boot device selection	2015-07-27 15:02:09 -04:00
config.mk	kbuild: use shorten logs for mkimage rules	2014-02-25 11:01:29 -05:00
dra7xx_iodelay.c	ARM: OMAP5/DRA7: Expose do_set_iodelay	2016-03-27 09:12:15 -04:00
emif.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
hw_data.c	ARM: DRA7: Add ABB setup for all domains	2016-04-25 15:10:41 -04:00
hwinit.c	ARM: DRA72x: Add support for detection of SR2.0	2016-03-27 09:12:12 -04:00
Kconfig	ARM: DRA7: Enable EEPROM support	2016-03-14 19:18:50 -04:00
Makefile	omap5: Definitions for SYS_BOOT-based fallback boot device selection	2015-07-27 15:02:09 -04:00
prcm-regs.c	ARM: DRA7: Add ABB setup for all domains	2016-04-25 15:10:41 -04:00
sdram.c	ARM: DRA72: sdram: Update sdram ext phy configuration for SR2.0	2016-03-27 09:12:14 -04:00