u-boot/include/configs/legoev3.h
Tom Rini 308520b8f2 global: Remove unused CONFIG symbols
This removes the following unreferenced CONFIG symbols:
   CONFIG_FDTADDR
   CONFIG_FDTFILE
   CONFIG_FLASH_SECTOR_SIZE
   CONFIG_FSL_CPLD
   CONFIG_HDMI_ENCODER_I2C_ADDR
   CONFIG_I2C_MVTWSI
   CONFIG_I2C_RTC_ADDR
   CONFIG_IRAM_END
   CONFIG_IRAM_SIZE
   CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
   CONFIG_L1_INIT_RAM
   CONFIG_MACB_SEARCH_PHY
   CONFIG_MIU_2BIT_21_7_INTERLEAVED
   CONFIG_MTD_NAND_VERIFY_WRITE
   CONFIG_MVGBE_PORTS
   CONFIG_NETDEV
   CONFIG_NUM_DSP_CPUS
   CONFIG_PHY_BASE_ADR
   CONFIG_PHY_INTERFACE_MODE
   CONFIG_PSRAM_SCFG
   CONFIG_RAMBOOT_SPIFLASH
   CONFIG_RAMBOOT_TEXT_BASE
   CONFIG_RD_LVL
   CONFIG_ROCKCHIP_SDHCI_MAX_FREQ
   CONFIG_SETUP_INITRD_TAG
   CONFIG_SH_QSPI_BASE
   CONFIG_SMDK5420
   CONFIG_SOCRATES
   CONFIG_SPI_ADDR
   CONFIG_SPI_FLASH_QUAD
   CONFIG_SPI_FLASH_SIZE
   CONFIG_SPI_HALF_DUPLEX
   CONFIG_SPI_N25Q256A_RESET
   CONFIG_TEGRA_SLINK_CTRLS
   CONFIG_TPM_TIS_BASE_ADDRESS
   CONFIG_UBOOT_SECTOR_COUNT
   CONFIG_UBOOT_SECTOR_START
   CONFIG_VAR_SIZE_SPL
   CONFIG_VERY_BIG_RAM

And also:
   BL1_SIZE
   PHY_NO
   RESERVE_BLOCK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00

90 lines
2.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2016 David Lechner <david@lechnology.com>
*
* Based on da850evm.h
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*
* Based on davinci_dvevm.h. Original Copyrights follow:
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* SoC Configuration
*/
#define CFG_SYS_EXCEPTION_VECTORS_HIGH
#define CFG_SYS_OSCIN_FREQ 24000000
#define CFG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CFG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
/*
* Memory Info
*/
#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
/* memtest start addr */
/* memtest will be run on 16MB */
/*
* Serial Driver info
*/
#define CFG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CFG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID)
/*
* U-Boot general configuration
*/
/*
* Linux Information
*/
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootenvfile=uEnv.txt\0" \
"fdtfile=da850-lego-ev3.dtb\0" \
"memsize=64M\0" \
"filesyssize=10M\0" \
"verify=n\0" \
"console=ttyS1,115200n8\0" \
"bootscraddr=0xC0600000\0" \
"fdtaddr=0xC0600000\0" \
"loadaddr=0xC0007FC0\0" \
"filesysaddr=0xC1180000\0" \
"fwupdateboot=mw 0xFFFF1FFC 0x5555AAAA; reset\0" \
"importbootenv=echo Importing environment...; " \
"env import -t ${loadaddr} ${filesize}\0" \
"loadbootenv=fatload mmc 0 ${loadaddr} ${bootenvfile}\0" \
"mmcargs=setenv bootargs console=${console} root=/dev/mmcblk0p2 rw " \
"rootwait ${optargs}\0" \
"mmcboot=bootm ${loadaddr}\0" \
"flashargs=setenv bootargs initrd=${filesysaddr},${filesyssize} " \
"root=/dev/ram0 rw rootfstype=squashfs console=${console} " \
"${optargs}\0" \
"flashboot=sf probe 0; " \
"sf read ${fdtaddr} 0x40000 0x10000; " \
"sf read ${loadaddr} 0x50000 0x400000; " \
"sf read ${filesysaddr} 0x450000 0xA00000; " \
"run fdtfixup; " \
"run fdtboot\0" \
"loadimage=fatload mmc 0 ${loadaddr} uImage\0" \
"loadfdt=fatload mmc 0 ${fdtaddr} ${fdtfile}\0" \
"fdtfixup=fdt addr ${fdtaddr}; fdt resize; fdt chosen\0" \
"fdtboot=bootm ${loadaddr} - ${fdtaddr}\0" \
"loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \
"bootscript=source ${bootscraddr}\0"
/* additions for new relocation code, must added to all boards */
#define CFG_SYS_SDRAM_BASE 0xc0000000
#include <asm/arch/hardware.h>
#endif /* __CONFIG_H */