mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
77c4261130
If we include both the rk3288_grf.h and rv1108_grf.h, it will cause the conflicts of redefinition. Clean the iomux definitions at grf_rv1108.h, and move them into pinctrl-driver. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
||
|---|---|---|
| .. | ||
| evb_rv1108.c | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Here is the step-by-step to boot U-Boot on rv1108 evb. Get ddr init binary ============================================================================== > git clone https://github.com/rockchip-linux/rkbin.git Compile U-Boot =========================== > make CROSS_COMPILE=arm-linux-gnueabi- evb-rv1108_defconfig all > ./tools/mkimage -n rv1108 -T rksd -d ../rkbin/rv1x/rv1108ddr_v1.00.bin spl.bin > cat spl.bin u-boot.bin > u-boot.img Flash the image by rkdeveloptool ================================ rkdeveloptool can get from https://github.com/rockchip-linux/rkdeveloptool.git Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: > rkdeveloptool db ./rkbin/rv1x/rv1108usbboot_v1.00.bin > rkdeveloptool wl 0x40 u-boot.img > rkdeveloptool RD You should be able to get U-Boot log message from boot console: DDR Version V1.02 20170220 In 400MHz DDR3 Bus Width=16 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=512MB mach:2 OUT U-Boot 2017.05-00693-g3a5b171 (Jun 01 2017 - 17:37:53 +0800) Model: Rockchip RV1108 Evaluation board DRAM: 128 MiB APLL: 600000000 DPLL:792000000 GPLL:384000000 MMC: Using default environment In: serial@10210000 Out: serial@10210000 Err: serial@10210000 Net: No ethernet found. Hit any key to stop autoboot: 0 =>