mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
1514244cc1
DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C API when DM_I2C is used. The goal is to eventually remove DM_I2C_COMPAT when all I2C "clients" have been migrated to use the DM API. This a step in that direction for the TI based platforms. Build tested with buildman: buildman -dle am33xx ti omap3 omap4 omap5 davinci keystone boot tested with: am335x_evm, am335x_boneblack, am335x_boneblack_vboot (DM version), am57xx_evm, dra7xx_evm, k2g_evm, am437x_evm Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
464 lines
10 KiB
C
464 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Library to support early TI EVM EEPROM handling
|
|
*
|
|
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Lokesh Vutla
|
|
* Steve Kipisz
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/omap_common.h>
|
|
#include <dm/uclass.h>
|
|
#include <i2c.h>
|
|
|
|
#include "board_detect.h"
|
|
|
|
#if !defined(CONFIG_DM_I2C)
|
|
/**
|
|
* ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
|
|
* @i2c_bus: i2c bus number to initialize
|
|
* @dev_addr: Device address to probe for
|
|
*
|
|
* Return: 0 on success or corresponding error on failure.
|
|
*/
|
|
static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr)
|
|
{
|
|
int rc;
|
|
|
|
if (i2c_bus >= 0) {
|
|
rc = i2c_set_bus_num(i2c_bus);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
return i2c_probe(dev_addr);
|
|
}
|
|
|
|
/**
|
|
* ti_i2c_eeprom_read - Read data from an EEPROM
|
|
* @dev_addr: The device address of the EEPROM
|
|
* @offset: Offset to start reading in the EEPROM
|
|
* @ep: Pointer to a buffer to read into
|
|
* @epsize: Size of buffer
|
|
*
|
|
* Return: 0 on success or corresponding result of i2c_read
|
|
*/
|
|
static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
|
|
uchar *ep, int epsize)
|
|
{
|
|
return i2c_read(dev_addr, offset, 2, ep, epsize);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* ti_eeprom_string_cleanup() - Handle eeprom programming errors
|
|
* @s: eeprom string (should be NULL terminated)
|
|
*
|
|
* Some Board manufacturers do not add a NULL termination at the
|
|
* end of string, instead some binary information is kludged in, hence
|
|
* convert the string to just printable characters of ASCII chart.
|
|
*/
|
|
static void __maybe_unused ti_eeprom_string_cleanup(char *s)
|
|
{
|
|
int i, l;
|
|
|
|
l = strlen(s);
|
|
for (i = 0; i < l; i++, s++)
|
|
if (*s < ' ' || *s > '~') {
|
|
*s = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
__weak void gpi2c_init(void)
|
|
{
|
|
}
|
|
|
|
static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
|
|
u32 header, u32 size, uint8_t *ep)
|
|
{
|
|
u32 hdr_read;
|
|
int rc;
|
|
|
|
#if defined(CONFIG_DM_I2C)
|
|
struct udevice *dev;
|
|
struct udevice *bus;
|
|
|
|
rc = uclass_get_device_by_seq(UCLASS_I2C, bus_addr, &bus);
|
|
if (rc)
|
|
return rc;
|
|
rc = i2c_get_chip(bus, dev_addr, 1, &dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Read the header first then only read the other contents.
|
|
*/
|
|
rc = i2c_set_chip_offset_len(dev, 2);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Corrupted data??? */
|
|
if (hdr_read != header) {
|
|
rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
|
|
/*
|
|
* read the eeprom header using i2c again, but use only a
|
|
* 1 byte address (some legacy boards need this..)
|
|
*/
|
|
if (rc) {
|
|
rc = i2c_set_chip_offset_len(dev, 1);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
|
|
}
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
if (hdr_read != header)
|
|
return -1;
|
|
|
|
rc = dm_i2c_read(dev, 0, ep, size);
|
|
if (rc)
|
|
return rc;
|
|
#else
|
|
u32 byte;
|
|
|
|
gpi2c_init();
|
|
rc = ti_i2c_eeprom_init(bus_addr, dev_addr);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Read the header first then only read the other contents.
|
|
*/
|
|
byte = 2;
|
|
|
|
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Corrupted data??? */
|
|
if (hdr_read != header) {
|
|
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
|
|
/*
|
|
* read the eeprom header using i2c again, but use only a
|
|
* 1 byte address (some legacy boards need this..)
|
|
*/
|
|
byte = 1;
|
|
if (rc) {
|
|
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
|
|
4);
|
|
}
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
if (hdr_read != header)
|
|
return -1;
|
|
|
|
rc = i2c_read(dev_addr, 0x0, byte, ep, size);
|
|
if (rc)
|
|
return rc;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int __maybe_unused ti_i2c_eeprom_am_set(const char *name, const char *rev)
|
|
{
|
|
struct ti_common_eeprom *ep;
|
|
|
|
if (!name || !rev)
|
|
return -1;
|
|
|
|
ep = TI_EEPROM_DATA;
|
|
if (ep->header == TI_EEPROM_HEADER_MAGIC)
|
|
goto already_set;
|
|
|
|
/* Set to 0 all fields */
|
|
memset(ep, 0, sizeof(*ep));
|
|
strncpy(ep->name, name, TI_EEPROM_HDR_NAME_LEN);
|
|
strncpy(ep->version, rev, TI_EEPROM_HDR_REV_LEN);
|
|
/* Some dummy serial number to identify the platform */
|
|
strncpy(ep->serial, "0000", TI_EEPROM_HDR_SERIAL_LEN);
|
|
/* Mark it with a valid header */
|
|
ep->header = TI_EEPROM_HEADER_MAGIC;
|
|
|
|
already_set:
|
|
return 0;
|
|
}
|
|
|
|
int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr)
|
|
{
|
|
int rc;
|
|
struct ti_am_eeprom am_ep;
|
|
struct ti_common_eeprom *ep;
|
|
|
|
ep = TI_EEPROM_DATA;
|
|
#ifndef CONFIG_SPL_BUILD
|
|
if (ep->header == TI_EEPROM_HEADER_MAGIC)
|
|
return 0; /* EEPROM has already been read */
|
|
#endif
|
|
|
|
/* Initialize with a known bad marker for i2c fails.. */
|
|
ep->header = TI_DEAD_EEPROM_MAGIC;
|
|
ep->name[0] = 0x0;
|
|
ep->version[0] = 0x0;
|
|
ep->serial[0] = 0x0;
|
|
ep->config[0] = 0x0;
|
|
|
|
rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
|
|
sizeof(am_ep), (uint8_t *)&am_ep);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ep->header = am_ep.header;
|
|
strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->name);
|
|
|
|
/* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
|
|
if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 &&
|
|
am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00)
|
|
strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1);
|
|
else
|
|
strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->version);
|
|
strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->serial);
|
|
strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->config);
|
|
|
|
memcpy(ep->mac_addr, am_ep.mac_addr,
|
|
TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr)
|
|
{
|
|
int rc, offset = 0;
|
|
struct dra7_eeprom dra7_ep;
|
|
struct ti_common_eeprom *ep;
|
|
|
|
ep = TI_EEPROM_DATA;
|
|
#ifndef CONFIG_SPL_BUILD
|
|
if (ep->header == DRA7_EEPROM_HEADER_MAGIC)
|
|
return 0; /* EEPROM has already been read */
|
|
#endif
|
|
|
|
/* Initialize with a known bad marker for i2c fails.. */
|
|
ep->header = TI_DEAD_EEPROM_MAGIC;
|
|
ep->name[0] = 0x0;
|
|
ep->version[0] = 0x0;
|
|
ep->serial[0] = 0x0;
|
|
ep->config[0] = 0x0;
|
|
ep->emif1_size = 0;
|
|
ep->emif2_size = 0;
|
|
|
|
rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC,
|
|
sizeof(dra7_ep), (uint8_t *)&dra7_ep);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ep->header = dra7_ep.header;
|
|
strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->name);
|
|
|
|
offset = dra7_ep.version_major - 1;
|
|
|
|
/* Rev F is skipped */
|
|
if (offset >= 5)
|
|
offset = offset + 1;
|
|
snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d",
|
|
'A' + offset, dra7_ep.version_minor);
|
|
ti_eeprom_string_cleanup(ep->version);
|
|
ep->emif1_size = (u64)dra7_ep.emif1_size;
|
|
ep->emif2_size = (u64)dra7_ep.emif2_size;
|
|
strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->config);
|
|
|
|
return 0;
|
|
}
|
|
|
|
bool __maybe_unused board_ti_is(char *name_tag)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header == TI_DEAD_EEPROM_MAGIC)
|
|
return false;
|
|
return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN);
|
|
}
|
|
|
|
bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
int l;
|
|
|
|
if (ep->header == TI_DEAD_EEPROM_MAGIC)
|
|
return false;
|
|
|
|
l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len;
|
|
return !strncmp(ep->version, rev_tag, l);
|
|
}
|
|
|
|
char * __maybe_unused board_ti_get_rev(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
|
|
return ep->version;
|
|
}
|
|
|
|
char * __maybe_unused board_ti_get_config(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
|
|
return ep->config;
|
|
}
|
|
|
|
char * __maybe_unused board_ti_get_name(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
|
|
return ep->name;
|
|
}
|
|
|
|
void __maybe_unused
|
|
board_ti_get_eth_mac_addr(int index,
|
|
u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header == TI_DEAD_EEPROM_MAGIC)
|
|
goto fail;
|
|
|
|
if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR)
|
|
goto fail;
|
|
|
|
memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
|
|
return;
|
|
|
|
fail:
|
|
memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
|
|
}
|
|
|
|
u64 __maybe_unused board_ti_get_emif1_size(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
|
|
return 0;
|
|
|
|
return ep->emif1_size;
|
|
}
|
|
|
|
u64 __maybe_unused board_ti_get_emif2_size(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
|
|
return 0;
|
|
|
|
return ep->emif2_size;
|
|
}
|
|
|
|
void __maybe_unused set_board_info_env(char *name)
|
|
{
|
|
char *unknown = "unknown";
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (name)
|
|
env_set("board_name", name);
|
|
else if (ep->name)
|
|
env_set("board_name", ep->name);
|
|
else
|
|
env_set("board_name", unknown);
|
|
|
|
if (ep->version)
|
|
env_set("board_rev", ep->version);
|
|
else
|
|
env_set("board_rev", unknown);
|
|
|
|
if (ep->serial)
|
|
env_set("board_serial", ep->serial);
|
|
else
|
|
env_set("board_serial", unknown);
|
|
}
|
|
|
|
static u64 mac_to_u64(u8 mac[6])
|
|
{
|
|
int i;
|
|
u64 addr = 0;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
addr <<= 8;
|
|
addr |= mac[i];
|
|
}
|
|
|
|
return addr;
|
|
}
|
|
|
|
static void u64_to_mac(u64 addr, u8 mac[6])
|
|
{
|
|
mac[5] = addr;
|
|
mac[4] = addr >> 8;
|
|
mac[3] = addr >> 16;
|
|
mac[2] = addr >> 24;
|
|
mac[1] = addr >> 32;
|
|
mac[0] = addr >> 40;
|
|
}
|
|
|
|
void board_ti_set_ethaddr(int index)
|
|
{
|
|
uint8_t mac_addr[6];
|
|
int i;
|
|
u64 mac1, mac2;
|
|
u8 mac_addr1[6], mac_addr2[6];
|
|
int num_macs;
|
|
/*
|
|
* Export any Ethernet MAC addresses from EEPROM.
|
|
* The 2 MAC addresses in EEPROM define the address range.
|
|
*/
|
|
board_ti_get_eth_mac_addr(0, mac_addr1);
|
|
board_ti_get_eth_mac_addr(1, mac_addr2);
|
|
|
|
if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) {
|
|
mac1 = mac_to_u64(mac_addr1);
|
|
mac2 = mac_to_u64(mac_addr2);
|
|
|
|
/* must contain an address range */
|
|
num_macs = mac2 - mac1 + 1;
|
|
if (num_macs <= 0)
|
|
return;
|
|
|
|
if (num_macs > 50) {
|
|
printf("%s: Too many MAC addresses: %d. Limiting to 50\n",
|
|
__func__, num_macs);
|
|
num_macs = 50;
|
|
}
|
|
|
|
for (i = 0; i < num_macs; i++) {
|
|
u64_to_mac(mac1 + i, mac_addr);
|
|
if (is_valid_ethaddr(mac_addr)) {
|
|
eth_env_set_enetaddr_by_index("eth", i + index,
|
|
mac_addr);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
bool __maybe_unused board_ti_was_eeprom_read(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header == TI_EEPROM_HEADER_MAGIC)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|