mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 13:33:40 +00:00
b37b7b2063
This converts all x86 boards over to DM sysreset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
558 lines
16 KiB
C
558 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2011 The Chromium OS Authors.
|
|
* (C) Copyright 2010,2011
|
|
* Graeme Russ, <graeme.russ@gmail.com>
|
|
*
|
|
* Portions from Coreboot mainboard/google/link/romstage.c
|
|
* Copyright (C) 2007-2010 coresystems GmbH
|
|
* Copyright (C) 2011 Google Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <rtc.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
#include <syscon.h>
|
|
#include <sysreset.h>
|
|
#include <asm/cpu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/intel_regs.h>
|
|
#include <asm/mrccache.h>
|
|
#include <asm/mrc_common.h>
|
|
#include <asm/mtrr.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/report_platform.h>
|
|
#include <asm/arch/me.h>
|
|
#include <asm/arch/pei_data.h>
|
|
#include <asm/arch/pch.h>
|
|
#include <asm/post.h>
|
|
#include <asm/arch/sandybridge.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define CMOS_OFFSET_MRC_SEED 152
|
|
#define CMOS_OFFSET_MRC_SEED_S3 156
|
|
#define CMOS_OFFSET_MRC_SEED_CHK 160
|
|
|
|
ulong board_get_usable_ram_top(ulong total_size)
|
|
{
|
|
return mrc_common_board_get_usable_ram_top(total_size);
|
|
}
|
|
|
|
int dram_init_banksize(void)
|
|
{
|
|
mrc_common_dram_init_banksize();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int read_seed_from_cmos(struct pei_data *pei_data)
|
|
{
|
|
u16 c1, c2, checksum, seed_checksum;
|
|
struct udevice *dev;
|
|
int ret = 0;
|
|
|
|
ret = uclass_get_device(UCLASS_RTC, 0, &dev);
|
|
if (ret) {
|
|
debug("Cannot find RTC: err=%d\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Read scrambler seeds from CMOS RAM. We don't want to store them in
|
|
* SPI flash since they change on every boot and that would wear down
|
|
* the flash too much. So we store these in CMOS and the large MRC
|
|
* data in SPI flash.
|
|
*/
|
|
ret = rtc_read32(dev, CMOS_OFFSET_MRC_SEED, &pei_data->scrambler_seed);
|
|
if (!ret) {
|
|
ret = rtc_read32(dev, CMOS_OFFSET_MRC_SEED_S3,
|
|
&pei_data->scrambler_seed_s3);
|
|
}
|
|
if (ret) {
|
|
debug("Failed to read from RTC %s\n", dev->name);
|
|
return ret;
|
|
}
|
|
|
|
debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n",
|
|
pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED);
|
|
debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n",
|
|
pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3);
|
|
|
|
/* Compute seed checksum and compare */
|
|
c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed,
|
|
sizeof(u32));
|
|
c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3,
|
|
sizeof(u32));
|
|
checksum = add_ip_checksums(sizeof(u32), c1, c2);
|
|
|
|
seed_checksum = rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK);
|
|
seed_checksum |= rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1) << 8;
|
|
|
|
if (checksum != seed_checksum) {
|
|
debug("%s: invalid seed checksum\n", __func__);
|
|
pei_data->scrambler_seed = 0;
|
|
pei_data->scrambler_seed_s3 = 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int prepare_mrc_cache(struct pei_data *pei_data)
|
|
{
|
|
struct mrc_data_container *mrc_cache;
|
|
struct mrc_region entry;
|
|
int ret;
|
|
|
|
ret = read_seed_from_cmos(pei_data);
|
|
if (ret)
|
|
return ret;
|
|
ret = mrccache_get_region(NULL, &entry);
|
|
if (ret)
|
|
return ret;
|
|
mrc_cache = mrccache_find_current(&entry);
|
|
if (!mrc_cache)
|
|
return -ENOENT;
|
|
|
|
pei_data->mrc_input = mrc_cache->data;
|
|
pei_data->mrc_input_len = mrc_cache->data_size;
|
|
debug("%s: at %p, size %x checksum %04x\n", __func__,
|
|
pei_data->mrc_input, pei_data->mrc_input_len,
|
|
mrc_cache->checksum);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int write_seeds_to_cmos(struct pei_data *pei_data)
|
|
{
|
|
u16 c1, c2, checksum;
|
|
struct udevice *dev;
|
|
int ret = 0;
|
|
|
|
ret = uclass_get_device(UCLASS_RTC, 0, &dev);
|
|
if (ret) {
|
|
debug("Cannot find RTC: err=%d\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Save the MRC seed values to CMOS */
|
|
rtc_write32(dev, CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed);
|
|
debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n",
|
|
pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED);
|
|
|
|
rtc_write32(dev, CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3);
|
|
debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n",
|
|
pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3);
|
|
|
|
/* Save a simple checksum of the seed values */
|
|
c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed,
|
|
sizeof(u32));
|
|
c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3,
|
|
sizeof(u32));
|
|
checksum = add_ip_checksums(sizeof(u32), c1, c2);
|
|
|
|
rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff);
|
|
rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Use this hook to save our SDRAM parameters */
|
|
int misc_init_r(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = mrccache_save();
|
|
if (ret)
|
|
printf("Unable to save MRC data: %d\n", ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void post_system_agent_init(struct udevice *dev, struct udevice *me_dev,
|
|
struct pei_data *pei_data)
|
|
{
|
|
uint16_t done;
|
|
|
|
/*
|
|
* Send ME init done for SandyBridge here. This is done inside the
|
|
* SystemAgent binary on IvyBridge
|
|
*/
|
|
dm_pci_read_config16(dev, PCI_DEVICE_ID, &done);
|
|
done &= BASE_REV_MASK;
|
|
if (BASE_REV_SNB == done)
|
|
intel_early_me_init_done(dev, me_dev, ME_INIT_STATUS_SUCCESS);
|
|
else
|
|
intel_me_status(me_dev);
|
|
|
|
/* If PCIe init is skipped, set the PEG clock gating */
|
|
if (!pei_data->pcie_init)
|
|
setbits_le32(MCHBAR_REG(0x7010), 1);
|
|
}
|
|
|
|
static int recovery_mode_enabled(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
static int copy_spd(struct udevice *dev, struct pei_data *peid)
|
|
{
|
|
const void *data;
|
|
int ret;
|
|
|
|
ret = mrc_locate_spd(dev, sizeof(peid->spd_data[0]), &data);
|
|
if (ret) {
|
|
debug("%s: Could not locate SPD (ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0]));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sdram_find() - Find available memory
|
|
*
|
|
* This is a bit complicated since on x86 there are system memory holes all
|
|
* over the place. We create a list of available memory blocks
|
|
*
|
|
* @dev: Northbridge device
|
|
*/
|
|
static int sdram_find(struct udevice *dev)
|
|
{
|
|
struct memory_info *info = &gd->arch.meminfo;
|
|
uint32_t tseg_base, uma_size, tolud;
|
|
uint64_t tom, me_base, touud;
|
|
uint64_t uma_memory_base = 0;
|
|
unsigned long long tomk;
|
|
uint16_t ggc;
|
|
u32 val;
|
|
|
|
/* Total Memory 2GB example:
|
|
*
|
|
* 00000000 0000MB-1992MB 1992MB RAM (writeback)
|
|
* 7c800000 1992MB-2000MB 8MB TSEG (SMRR)
|
|
* 7d000000 2000MB-2002MB 2MB GFX GTT (uncached)
|
|
* 7d200000 2002MB-2034MB 32MB GFX UMA (uncached)
|
|
* 7f200000 2034MB TOLUD
|
|
* 7f800000 2040MB MEBASE
|
|
* 7f800000 2040MB-2048MB 8MB ME UMA (uncached)
|
|
* 80000000 2048MB TOM
|
|
* 100000000 4096MB-4102MB 6MB RAM (writeback)
|
|
*
|
|
* Total Memory 4GB example:
|
|
*
|
|
* 00000000 0000MB-2768MB 2768MB RAM (writeback)
|
|
* ad000000 2768MB-2776MB 8MB TSEG (SMRR)
|
|
* ad800000 2776MB-2778MB 2MB GFX GTT (uncached)
|
|
* ada00000 2778MB-2810MB 32MB GFX UMA (uncached)
|
|
* afa00000 2810MB TOLUD
|
|
* ff800000 4088MB MEBASE
|
|
* ff800000 4088MB-4096MB 8MB ME UMA (uncached)
|
|
* 100000000 4096MB TOM
|
|
* 100000000 4096MB-5374MB 1278MB RAM (writeback)
|
|
* 14fe00000 5368MB TOUUD
|
|
*/
|
|
|
|
/* Top of Upper Usable DRAM, including remap */
|
|
dm_pci_read_config32(dev, TOUUD + 4, &val);
|
|
touud = (uint64_t)val << 32;
|
|
dm_pci_read_config32(dev, TOUUD, &val);
|
|
touud |= val;
|
|
|
|
/* Top of Lower Usable DRAM */
|
|
dm_pci_read_config32(dev, TOLUD, &tolud);
|
|
|
|
/* Top of Memory - does not account for any UMA */
|
|
dm_pci_read_config32(dev, 0xa4, &val);
|
|
tom = (uint64_t)val << 32;
|
|
dm_pci_read_config32(dev, 0xa0, &val);
|
|
tom |= val;
|
|
|
|
debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
|
|
|
|
/* ME UMA needs excluding if total memory <4GB */
|
|
dm_pci_read_config32(dev, 0x74, &val);
|
|
me_base = (uint64_t)val << 32;
|
|
dm_pci_read_config32(dev, 0x70, &val);
|
|
me_base |= val;
|
|
|
|
debug("MEBASE %llx\n", me_base);
|
|
|
|
/* TODO: Get rid of all this shifting by 10 bits */
|
|
tomk = tolud >> 10;
|
|
if (me_base == tolud) {
|
|
/* ME is from MEBASE-TOM */
|
|
uma_size = (tom - me_base) >> 10;
|
|
/* Increment TOLUD to account for ME as RAM */
|
|
tolud += uma_size << 10;
|
|
/* UMA starts at old TOLUD */
|
|
uma_memory_base = tomk * 1024ULL;
|
|
debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10);
|
|
}
|
|
|
|
/* Graphics memory comes next */
|
|
dm_pci_read_config16(dev, GGC, &ggc);
|
|
if (!(ggc & 2)) {
|
|
debug("IGD decoded, subtracting ");
|
|
|
|
/* Graphics memory */
|
|
uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL;
|
|
debug("%uM UMA", uma_size >> 10);
|
|
tomk -= uma_size;
|
|
uma_memory_base = tomk * 1024ULL;
|
|
|
|
/* GTT Graphics Stolen Memory Size (GGMS) */
|
|
uma_size = ((ggc >> 8) & 0x3) * 1024ULL;
|
|
tomk -= uma_size;
|
|
uma_memory_base = tomk * 1024ULL;
|
|
debug(" and %uM GTT\n", uma_size >> 10);
|
|
}
|
|
|
|
/* Calculate TSEG size from its base which must be below GTT */
|
|
dm_pci_read_config32(dev, 0xb8, &tseg_base);
|
|
uma_size = (uma_memory_base - tseg_base) >> 10;
|
|
tomk -= uma_size;
|
|
uma_memory_base = tomk * 1024ULL;
|
|
debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10);
|
|
|
|
debug("Available memory below 4GB: %lluM\n", tomk >> 10);
|
|
|
|
/* Report the memory regions */
|
|
mrc_add_memory_area(info, 1 << 20, 2 << 28);
|
|
mrc_add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28);
|
|
mrc_add_memory_area(info, (4 << 28) + (2 << 20), tseg_base);
|
|
mrc_add_memory_area(info, 1ULL << 32, touud);
|
|
|
|
/* Add MTRRs for memory */
|
|
mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30);
|
|
mtrr_add_request(MTRR_TYPE_WRBACK, 2ULL << 30, 512 << 20);
|
|
mtrr_add_request(MTRR_TYPE_WRBACK, 0xaULL << 28, 256 << 20);
|
|
mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base, 16 << 20);
|
|
mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base + (16 << 20),
|
|
32 << 20);
|
|
|
|
/*
|
|
* If >= 4GB installed then memory from TOLUD to 4GB
|
|
* is remapped above TOM, TOUUD will account for both
|
|
*/
|
|
if (touud > (1ULL << 32ULL)) {
|
|
debug("Available memory above 4GB: %lluM\n",
|
|
(touud >> 20) - 4096);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rcba_config(void)
|
|
{
|
|
/*
|
|
* GFX INTA -> PIRQA (MSI)
|
|
* D28IP_P3IP WLAN INTA -> PIRQB
|
|
* D29IP_E1P EHCI1 INTA -> PIRQD
|
|
* D26IP_E2P EHCI2 INTA -> PIRQF
|
|
* D31IP_SIP SATA INTA -> PIRQF (MSI)
|
|
* D31IP_SMIP SMBUS INTB -> PIRQH
|
|
* D31IP_TTIP THRT INTC -> PIRQA
|
|
* D27IP_ZIP HDA INTA -> PIRQA (MSI)
|
|
*
|
|
* TRACKPAD -> PIRQE (Edge Triggered)
|
|
* TOUCHSCREEN -> PIRQG (Edge Triggered)
|
|
*/
|
|
|
|
/* Device interrupt pin register (board specific) */
|
|
writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
|
|
(INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP));
|
|
writel(NOINT << D30IP_PIP, RCB_REG(D30IP));
|
|
writel(INTA << D29IP_E1P, RCB_REG(D29IP));
|
|
writel(INTA << D28IP_P3IP, RCB_REG(D28IP));
|
|
writel(INTA << D27IP_ZIP, RCB_REG(D27IP));
|
|
writel(INTA << D26IP_E2P, RCB_REG(D26IP));
|
|
writel(NOINT << D25IP_LIP, RCB_REG(D25IP));
|
|
writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP));
|
|
|
|
/* Device interrupt route registers */
|
|
writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR));
|
|
writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR));
|
|
writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR));
|
|
writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR));
|
|
writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR));
|
|
writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR));
|
|
writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR));
|
|
|
|
/* Enable IOAPIC (generic) */
|
|
writew(0x0100, RCB_REG(OIC));
|
|
/* PCH BWG says to read back the IOAPIC enable register */
|
|
(void)readw(RCB_REG(OIC));
|
|
|
|
/* Disable unused devices (board specific) */
|
|
setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
struct pei_data _pei_data __aligned(8) = {
|
|
.pei_version = PEI_VERSION,
|
|
.mchbar = MCH_BASE_ADDRESS,
|
|
.dmibar = DEFAULT_DMIBAR,
|
|
.epbar = DEFAULT_EPBAR,
|
|
.pciexbar = CONFIG_PCIE_ECAM_BASE,
|
|
.smbusbar = SMBUS_IO_BASE,
|
|
.wdbbar = 0x4000000,
|
|
.wdbsize = 0x1000,
|
|
.hpet_address = CONFIG_HPET_ADDRESS,
|
|
.rcba = DEFAULT_RCBABASE,
|
|
.pmbase = DEFAULT_PMBASE,
|
|
.gpiobase = DEFAULT_GPIOBASE,
|
|
.thermalbase = 0xfed08000,
|
|
.system_type = 0, /* 0 Mobile, 1 Desktop/Server */
|
|
.tseg_size = CONFIG_SMM_TSEG_SIZE,
|
|
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
|
|
.ec_present = 1,
|
|
.ddr3lv_support = 1,
|
|
/*
|
|
* 0 = leave channel enabled
|
|
* 1 = disable dimm 0 on channel
|
|
* 2 = disable dimm 1 on channel
|
|
* 3 = disable dimm 0+1 on channel
|
|
*/
|
|
.dimm_channel0_disabled = 2,
|
|
.dimm_channel1_disabled = 2,
|
|
.max_ddr3_freq = 1600,
|
|
.usb_port_config = {
|
|
/*
|
|
* Empty and onboard Ports 0-7, set to un-used pin
|
|
* OC3
|
|
*/
|
|
{ 0, 3, 0x0000 }, /* P0= Empty */
|
|
{ 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */
|
|
{ 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */
|
|
{ 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */
|
|
{ 0, 3, 0x0000 }, /* P4= Empty */
|
|
{ 1, 3, 0x0040 }, /* P5= WWAN (no OC) */
|
|
{ 0, 3, 0x0000 }, /* P6= Empty */
|
|
{ 0, 3, 0x0000 }, /* P7= Empty */
|
|
/*
|
|
* Empty and onboard Ports 8-13, set to un-used pin
|
|
* OC4
|
|
*/
|
|
{ 1, 4, 0x0040 }, /* P8= Camera (no OC) */
|
|
{ 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */
|
|
{ 0, 4, 0x0000 }, /* P10= Empty */
|
|
{ 0, 4, 0x0000 }, /* P11= Empty */
|
|
{ 0, 4, 0x0000 }, /* P12= Empty */
|
|
{ 0, 4, 0x0000 }, /* P13= Empty */
|
|
},
|
|
};
|
|
struct pei_data *pei_data = &_pei_data;
|
|
struct udevice *dev, *me_dev;
|
|
int ret;
|
|
|
|
/* We need the pinctrl set up early */
|
|
ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &dev);
|
|
if (ret) {
|
|
debug("%s: Could not get pinconf (ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &dev);
|
|
if (ret) {
|
|
debug("%s: Could not get northbridge (ret=%d)\n", __func__,
|
|
ret);
|
|
return ret;
|
|
}
|
|
ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev);
|
|
if (ret) {
|
|
debug("%s: Could not get ME (ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
ret = copy_spd(dev, pei_data);
|
|
if (ret) {
|
|
debug("%s: Could not get SPD (ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
pei_data->boot_mode = gd->arch.pei_boot_mode;
|
|
debug("Boot mode %d\n", gd->arch.pei_boot_mode);
|
|
debug("mrc_input %p\n", pei_data->mrc_input);
|
|
|
|
/*
|
|
* Do not pass MRC data in for recovery mode boot,
|
|
* Always pass it in for S3 resume.
|
|
*/
|
|
if (!recovery_mode_enabled() ||
|
|
pei_data->boot_mode == PEI_BOOT_RESUME) {
|
|
ret = prepare_mrc_cache(pei_data);
|
|
if (ret)
|
|
debug("prepare_mrc_cache failed: %d\n", ret);
|
|
}
|
|
|
|
/* If MRC data is not found we cannot continue S3 resume. */
|
|
if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) {
|
|
debug("Giving up in sdram_initialize: No MRC data\n");
|
|
sysreset_walk_halt(SYSRESET_COLD);
|
|
}
|
|
|
|
/* Pass console handler in pei_data */
|
|
pei_data->tx_byte = sdram_console_tx_byte;
|
|
|
|
/* Wait for ME to be ready */
|
|
ret = intel_early_me_init(me_dev);
|
|
if (ret) {
|
|
debug("%s: Could not init ME (ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
ret = intel_early_me_uma_size(me_dev);
|
|
if (ret < 0) {
|
|
debug("%s: Could not get UMA size (ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mrc_common_init(dev, pei_data, false);
|
|
if (ret) {
|
|
debug("%s: mrc_common_init() failed (ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = sdram_find(dev);
|
|
if (ret) {
|
|
debug("%s: sdram_find() failed (ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
gd->ram_size = gd->arch.meminfo.total_32bit_memory;
|
|
|
|
debug("MRC output data length %#x at %p\n", pei_data->mrc_output_len,
|
|
pei_data->mrc_output);
|
|
|
|
post_system_agent_init(dev, me_dev, pei_data);
|
|
report_memory_config();
|
|
|
|
/* S3 resume: don't save scrambler seed or MRC data */
|
|
if (pei_data->boot_mode != PEI_BOOT_RESUME) {
|
|
/*
|
|
* This will be copied to SDRAM in reserve_arch(), then written
|
|
* to SPI flash in mrccache_save()
|
|
*/
|
|
gd->arch.mrc_output = (char *)pei_data->mrc_output;
|
|
gd->arch.mrc_output_len = pei_data->mrc_output_len;
|
|
ret = write_seeds_to_cmos(pei_data);
|
|
if (ret)
|
|
debug("Failed to write seeds to CMOS: %d\n", ret);
|
|
}
|
|
|
|
writew(0xCAFE, MCHBAR_REG(SSKPD));
|
|
if (ret)
|
|
return ret;
|
|
|
|
rcba_config();
|
|
|
|
return 0;
|
|
}
|