mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
6943cc9732
Microsemi SoC defines CONFIG_SYS_SDRAM_BASE to be 0x80000000, which represents the start of kseg0 and represents a virtual address. Meaning that the initrd_start and initrd_end point somewhere kseg0. When these parameters are passed to linux kernel through DT they are pointing somewhere in kseg0 which is a virtual address but linux kernel expects the addresses to be physical addresses(in kuseg) because it is converting the physical address to a virtual one. Therefore update the uboot to pass the physical address of initrd_start and initrd_end by converting them using the function virt_to_phys before setting up the DT. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
||
---|---|---|
.. | ||
ashldi3.c | ||
ashrdi3.c | ||
asm-offsets.c | ||
bootm.c | ||
cache.c | ||
cache_init.S | ||
genex.S | ||
libgcc.h | ||
lshrdi3.c | ||
Makefile | ||
reloc.c | ||
stack.c | ||
traps.c |