u-boot/arch/arm/dts/draak.dtsi
Marek Vasut 71d2a5e5ef ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7
Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

The following script has been used for the synchronization:

$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
	if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
		cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
	elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
		cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
	else
		echo "NOT FOUND: $i"
	fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )

Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.

Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.

Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .

Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .

Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> # r8a779a0-falcon-u-boot.dts
2023-02-02 01:49:19 +01:00

744 lines
13 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the Draak board
*
* Copyright (C) 2016-2018 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Renesas Draak board";
compatible = "renesas,draak";
aliases {
serial0 = &scif2;
ethernet0 = &avb;
};
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
* but needed to avoid cs2000/rcar_sound probe dead-lock
*/
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12288000>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 50000>;
brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
default-brightness-level = <10>;
power-supply = <&reg_12p0v>;
enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
composite-in {
compatible = "composite-video-connector";
port {
composite_con_in: endpoint {
remote-endpoint = <&adv7180_in>;
};
};
};
hdmi-in {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&adv7612_in>;
};
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&keys_pins>;
pinctrl-names = "default";
key-1 {
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "SW56-1";
wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "SW56-2";
wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW56-3";
wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "SW56-4";
wakeup-source;
debounce-interval = <20>;
};
};
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&reg_3p3v>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x18000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_12p0v: regulator-12p0v {
compatible = "regulator-fixed";
regulator-name = "D12.0V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-boot-on;
regulator-always-on;
};
sound_card: sound {
compatible = "audio-graph-card";
dais = <&rsnd_port0 /* ak4613 */
/* HDMI is not yet supported */
>;
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
x19_clk: x19 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
};
&audio_clk_b {
/*
* X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
* and R-Car Sound uses AUDIO_CLKB.
* Note is that schematic indicates VI4_FIELD conection only
* not AUDIO_CLKB at SoC page.
* And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
* SW60 should be 1-2.
*/
clock-frequency = <22579200>;
};
&avb {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio5>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
/*
* TX clock internal delay mode is required for reliable
* 1Gbps communication using the KSZ9031RNX phy present on
* the Draak board, however, TX clock internal delay mode
* isn't supported on R-Car D3(e). Thus, limit speed to
* 100Mbps for reliable communication.
*/
max-speed = <100>;
};
};
&can0 {
pinctrl-0 = <&can0_pins>;
pinctrl-names = "default";
status = "okay";
};
&can1 {
pinctrl-0 = <&can1_pins>;
pinctrl-names = "default";
status = "okay";
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&x12_clk>;
clock-names = "du.0", "du.1", "dclkin.0";
ports {
port@0 {
du_out_rgb: endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};
&ehci0 {
dr_mode = "host";
status = "okay";
};
&extal_clk {
clock-frequency = <48000000>;
};
&hsusb {
dr_mode = "host";
status = "okay";
};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
status = "okay";
ak4613: codec@10 {
compatible = "asahi-kasei,ak4613";
#sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 0>; /* audio_clkout */
asahi-kasei,in1-single-end;
asahi-kasei,in2-single-end;
asahi-kasei,out1-single-end;
asahi-kasei,out2-single-end;
asahi-kasei,out3-single-end;
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
port {
ak4613_endpoint: endpoint {
remote-endpoint = <&rsnd_for_ak4613>;
};
};
};
composite-in@20 {
compatible = "adi,adv7180cp";
reg = <0x20>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7180_in: endpoint {
remote-endpoint = <&composite_con_in>;
};
};
port@3 {
reg = <3>;
/*
* The VIN4 video input path is shared between
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
* CVBS is the default selection, link it to
* VIN4 here.
*/
adv7180_out: endpoint {
remote-endpoint = <&vin4_in>;
};
};
};
};
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
reg-names = "main", "edid", "cec", "packet";
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
};
hdmi-decoder@4c {
compatible = "adi,adv7612";
reg = <0x4c>;
default-input = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7612_in: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
port@2 {
reg = <2>;
/*
* The VIN4 video input path is shared between
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
* CVBS is the default selection, leave HDMI
* not connected here.
*/
adv7612_out: endpoint {
pclk-sample = <0>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
};
cs2000: clk-multiplier@4f {
#clock-cells = <0>;
compatible = "cirrus,cs2000-cp";
reg = <0x4f>;
clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
clock-names = "clk_in", "ref_clk";
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24576000>; /* 1/1 divide */
};
eeprom@50 {
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
};
};
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
status = "okay";
};
&lvds0 {
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
&lvds1 {
/*
* Even though the LVDS1 output is not connected, the encoder must be
* enabled to supply a pixel clock to the DU for the DPAD output when
* LVDS0 is in use.
*/
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
dr_mode = "host";
status = "okay";
};
&pfc {
avb0_pins: avb {
groups = "avb0_link", "avb0_mdio", "avb0_mii";
function = "avb0";
};
can0_pins: can0 {
groups = "can0_data_a";
function = "can0";
};
can1_pins: can1 {
groups = "can1_data_a";
function = "can1";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
};
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
};
i2c1_pins: i2c1 {
groups = "i2c1";
function = "i2c1";
};
keys_pins: keys {
pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
bias-pull-up;
};
pwm0_pins: pwm0 {
groups = "pwm0_c";
function = "pwm0";
};
pwm1_pins: pwm1 {
groups = "pwm1_c";
function = "pwm1";
};
rpc_pins: rpc {
groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
"rpc_int";
function = "rpc";
};
scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
};
sdhi2_pins: sd2 {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
power-source = <1800>;
};
sdhi2_pins_uhs: sd2_uhs {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
function = "ssi";
};
sound_clk_pins: sound-clk {
groups = "audio_clk_a", "audio_clk_b",
"audio_clkout", "audio_clkout1";
function = "audio_clk";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
vin4_pins_cvbs: vin4 {
groups = "vin4_data8", "vin4_sync", "vin4_clk";
function = "vin4";
};
};
&pwm0 {
pinctrl-0 = <&pwm0_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm1 {
pinctrl-0 = <&pwm1_pins>;
pinctrl-names = "default";
status = "okay";
};
&rcar_sound {
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
status = "okay";
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
<&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&cs2000>, <&audio_clk_b>,
<&cpg CPG_CORE R8A77995_CLK_ZA2>;
ports {
rsnd_port0: port {
rsnd_for_ak4613: endpoint {
remote-endpoint = <&ak4613_endpoint>;
dai-format = "left_j";
bitclock-master = <&rsnd_for_ak4613>;
frame-master = <&rsnd_for_ak4613>;
playback = <&ssi3>, <&src5>, <&dvc0>;
capture = <&ssi4>, <&src6>, <&dvc1>;
};
};
};
};
&rpc {
pinctrl-0 = <&rpc_pins>;
pinctrl-names = "default";
/* Left disabled. To be enabled by firmware when unlocked. */
flash@0 {
compatible = "cypress,hyperflash", "cfi-flash";
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
bootparam@0 {
reg = <0x00000000 0x040000>;
read-only;
};
bl2@40000 {
reg = <0x00040000 0x140000>;
read-only;
};
cert_header_sa6@180000 {
reg = <0x00180000 0x040000>;
read-only;
};
bl31@1c0000 {
reg = <0x001c0000 0x040000>;
read-only;
};
tee@200000 {
reg = <0x00200000 0x440000>;
read-only;
};
uboot@640000 {
reg = <0x00640000 0x100000>;
read-only;
};
dtb@740000 {
reg = <0x00740000 0x080000>;
};
kernel@7c0000 {
reg = <0x007c0000 0x1400000>;
};
user@1bc0000 {
reg = <0x01bc0000 0x2440000>;
};
};
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi2 {
/* used for on-board eMMC */
pinctrl-0 = <&sdhi2_pins>;
pinctrl-1 = <&sdhi2_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
no-sd;
no-sdio;
non-removable;
status = "okay";
};
&ssi4 {
shared-pin;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
renesas,no-otg-pins;
status = "okay";
};
&vin4 {
pinctrl-0 = <&vin4_pins_cvbs>;
pinctrl-names = "default";
status = "okay";
ports {
port {
vin4_in: endpoint {
remote-endpoint = <&adv7180_out>;
};
};
};
};