u-boot/drivers/gpio/mpc83xx_spisel_boot.c
Klaus H. Sorensen 3fb22bc2f8 gpio/mpc83xx_spisel_boot.c: gpio driver for SPISEL_BOOT signal
Some SoCs in the mpc83xx family, e.g. mpc8309, have a dedicated spi
chip select, SPISEL_BOOT, that is used by the boot code to boot from
flash.

This chip select will typically be used to select a SPI boot
flash. The SPISEL_BOOT signal is controlled by a single bit in the
SPI_CS register.

Implement a gpio driver for the spi chip select register. This allows a
spi driver capable of using gpios as chip select, to bind a chip select
to SPISEL_BOOT.

It may be a little odd to do this as a GPIO driver, since the signal
is neither GP or I, but it is quite convenient to present it to the
spi driver that way. The alternative it to teach mpc8xxx_spi to handle
the SPISEL_BOOT signal itself (that is how it's done in the linux
kernel, see commit 69b921acae8a)

Signed-off-by: Klaus H. Sorensen <khso@prevas.dk>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-03-31 10:06:52 -04:00

148 lines
3.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 DEIF A/S
*
* GPIO driver to set/clear SPISEL_BOOT pin on mpc83xx.
*/
#include <common.h>
#include <dm.h>
#include <mapmem.h>
#include <asm/gpio.h>
struct mpc83xx_spisel_boot {
u32 __iomem *spi_cs;
ulong addr;
uint gpio_count;
ulong type;
};
static u32 gpio_mask(uint gpio)
{
return (1U << (31 - (gpio)));
}
static int mpc83xx_spisel_boot_direction_input(struct udevice *dev, uint gpio)
{
return -EINVAL;
}
static int mpc83xx_spisel_boot_set_value(struct udevice *dev, uint gpio, int value)
{
struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
debug("%s: gpio=%d, value=%u, gpio_mask=0x%08x\n", __func__,
gpio, value, gpio_mask(gpio));
if (value)
setbits_be32(data->spi_cs, gpio_mask(gpio));
else
clrbits_be32(data->spi_cs, gpio_mask(gpio));
return 0;
}
static int mpc83xx_spisel_boot_direction_output(struct udevice *dev, uint gpio, int value)
{
return 0;
}
static int mpc83xx_spisel_boot_get_value(struct udevice *dev, uint gpio)
{
struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
return !!(in_be32(data->spi_cs) & gpio_mask(gpio));
}
static int mpc83xx_spisel_boot_get_function(struct udevice *dev, uint gpio)
{
return GPIOF_OUTPUT;
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
static int mpc83xx_spisel_boot_ofdata_to_platdata(struct udevice *dev)
{
struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
fdt_addr_t addr;
u32 reg[2];
dev_read_u32_array(dev, "reg", reg, 2);
addr = dev_translate_address(dev, reg);
plat->addr = addr;
plat->size = reg[1];
plat->ngpios = dev_read_u32_default(dev, "ngpios", 1);
return 0;
}
#endif
static int mpc83xx_spisel_boot_platdata_to_priv(struct udevice *dev)
{
struct mpc83xx_spisel_boot *priv = dev_get_priv(dev);
struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
unsigned long size = plat->size;
ulong driver_data = dev_get_driver_data(dev);
if (size == 0)
size = 0x04;
priv->addr = plat->addr;
priv->spi_cs = map_sysmem(plat->addr, size);
if (!priv->spi_cs)
return -ENOMEM;
priv->gpio_count = plat->ngpios;
priv->type = driver_data;
return 0;
}
static int mpc83xx_spisel_boot_probe(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
char name[32], *str;
mpc83xx_spisel_boot_platdata_to_priv(dev);
snprintf(name, sizeof(name), "MPC@%lx_", data->addr);
str = strdup(name);
if (!str)
return -ENOMEM;
uc_priv->bank_name = str;
uc_priv->gpio_count = data->gpio_count;
return 0;
}
static const struct dm_gpio_ops mpc83xx_spisel_boot_ops = {
.direction_input = mpc83xx_spisel_boot_direction_input,
.direction_output = mpc83xx_spisel_boot_direction_output,
.get_value = mpc83xx_spisel_boot_get_value,
.set_value = mpc83xx_spisel_boot_set_value,
.get_function = mpc83xx_spisel_boot_get_function,
};
static const struct udevice_id mpc83xx_spisel_boot_ids[] = {
{ .compatible = "fsl,mpc8309-spisel-boot" },
{ .compatible = "fsl,mpc83xx-spisel-boot" },
{ /* sentinel */ }
};
U_BOOT_DRIVER(spisel_boot_mpc83xx) = {
.name = "spisel_boot_mpc83xx",
.id = UCLASS_GPIO,
.ops = &mpc83xx_spisel_boot_ops,
#if CONFIG_IS_ENABLED(OF_CONTROL)
.ofdata_to_platdata = mpc83xx_spisel_boot_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct mpc8xxx_gpio_plat),
.of_match = mpc83xx_spisel_boot_ids,
#endif
.probe = mpc83xx_spisel_boot_probe,
.priv_auto_alloc_size = sizeof(struct mpc83xx_spisel_boot),
};